Log and Transfer - what happens to the source files?

I'm an experienced FCE4 user, but am using Log and Transfer for the first time with my new Canon Vixia HF M30 camera. Icons for the converted files are showing up in the Browser in FCE4, but where are the underlying converted flies? I didn't copy them from the camcorder to my hard drive when I started the process.

Log and Transfer behaves the same way as Capture. The files are transferred to the Capture Scratch folder on your scratch disk.

Similar Messages

  • If I delete a file in iCloud, what happens to the local file in ~/Library/Mobile Documents ?

    If I delete a file in iCloud, what happens to the local file in ~/Library/Mobile Documents ? Does it get deleted to?
    Hope somebody can help.
    Thx.

    I'm pretty certain that it gets deleted as well. If you try and open that mobile documents folder, it takes you to the iCloud drive folder. I've been searching for this same issue for the last 24 hours also as I inadvertently deleted my Keynote files stored on iCloud drive thinking I was just temporarily deleting Keynote from my iPad when upgrading to the latest iOS 8 version. (I needed space and thought, "Oh, I'll just reinstall later... Turns out I was in the iCloud storage area, not in my iPad storage area at the time and therefore deleted all my iCloud stored presentations. From every device.)

  • HT4796 what happens to the transferred files when the migration aborts?

    My migration aborted after an hour because the windows computer went to sleep.  What happened to the files that already transferred?  Where are they stored during the transfer?  The mac is mtn lion.

    Look in /var/folders
    In my case /var/folders/zz/blahblahlbah/T/.XMSandbox-tmp/Users/userid/Root
    rebooting got rid of them

  • What happened to the Adobe file dialog in CS4?

    Am I missing something or is the adobe open file dialog gone in CS4? I loved the ability to assign favorite folders on the left margin since I have so many files and drilling down into folders is such a repetitive chore! What happened?
    Also, don't know if anyone else has encountered this but it appears that since I installed CS4 master collection several of my most often used open type fonts are no longer recognized: Cronos Pro and Myriad Pro.

    Yup, the "Adobe Dialog" seems to be gone, gone, gone ...
    In terms of the fonts, where were those fonts installed? I also have full families of Cronos Pro and Myriad Pro installed on all my systems outside of the suite and have not encountered any problems is their use after installing the CS4 Master Collection. Are those same fonts still visible in the Windows Fonts Control Panel and accessible from other applications? If so, you may want to delete all the
    AdobeFnt##.lst files on your system and then startup a suite program and see if that fixes the AWOL fonts.
    - Dov

  • What happened to the infected files found by ClamXav?

    I ran a scan with ClamXav and found 15 infected files - Trojan and Phishing. I was told to rerun the scan with Quarantine turned on if I wanted to remove the files, which I di. The second scan found no infected files. I ran a third scan and still no infected files. Where are the infected files. Did ClamXav delete them? If so, what damage has been done to the mailboxes? If all the infected files were in Trash, does that make the situation better?

    Hangar 8 wrote:
    The first time I ran the scan ClamXav found the 15 infected files and quarantine was not turned on. There was a message to turn quarantine on if I wanted to remove the files
    Actually, the message says "You can either deal with them yourself, or scan again with the preferences set to move them into a different folder."
    I much prefer to deal with each file individually, rather than allow ClamXav to move anything, especially if I'm scanning e-mail content for malware or phishing. That prevents damage to my mailboxes and also allows me to check to see if the phishing e-mails are correct or false positives. In my case, almost all the phishing e-mails were incorrectly identified as such.  As long as it doesn't find too many files I simply control-click / right-click on the identified file, select "Reveal In Finder" for e-mail, "Delete" for files that I'm certain are malware and "Quarantine" for those I'm not sure of and what to research.
    at the time, I thought removing them was a good idea. So I reran the scan with quarantine turned on but it found no infected files. ClamXav must have deleted the infected files when I closed the program after the first scan. Is that what it is supposed to do? If so, were they placed in a folder and which one?
    When you turned quarantine on in the ClamXav preferences, there was also a button to "Set quarantine folder..." after which it should have listed the path to that folder under "Quarantine infected files to:". In that same preference is another button which will "Open quarantine folder".
    All that being said, I was unable to repeat your results. I ran the first scan which identified the test virus, turned quarantine on and the test virus stayed where it was first found.  I ran a second scan where it was again identified, the status said "Quarantined" and when I opened the quarantine folder it was there. ClamXav takes great pains to exclude your quarantine folder, so anything that was moved to it will not be subsequently identified. So if those files are not in your quarantine folder, I have no idea where they went. You can look in your trash can, but they should not be there either.
    If you remember the names of any of the files you can try finding them using Find Any File (Spotlight will probably not find them).
    Lastly, I would encourage you to take future questions like this to the ClamXav Forum where you will find answers to most questions (although not all of this one) and maybe even get faster answers than here.

  • Missing iPhone backup in iTunes from iOS5 update. What happens to the backup files from the update process?

    My PC had a BSOD while restoring my data.  After I restarted, opened iTunes, and connected my phone, the restore did not resume. (I have seen the restore process resume after an interruption.)  I tried to manually restore the data, but iTunes does not list the backup that was taken during the update process.  Is this backup stored in a different location or format?  Is there a way I can get my data back?  I tried an extraction tool from the web and it didn't detect the backup from the update.

    Same with me; I only found one backup dating back from august; tried that and works fine. But missing all my pics/vids in between. I have been searching my pc for files that were created on the day of the OS upgrade, but could not figure out any backups...
    Any help?
    iPhone 4, Windows 7

  • Erasing Content and Settings -- What happens to the saved apps in itunes?

    Hey all,
    I've been thinking about avoiding to do a HUGE backup with my ipod touch 2nd gen 32GB to install iOS4 by erasing all the content and settings of my existing ipod. By HUGE, I mean, leaving your ipod to backup for 6 hours and it's less than 25% done. I tried a few times and gave up each time because it was taking ridiciously long. Anyways, not the issue I'm asking.
    I was wondering if I erase all the content and settings from the ipod itself through Settings > General > Reset (or something like that), can I retrieve the applications saved on my computer?
    Can i also retrieve my apps if I were to restore my ipod from itunes and set it as a new ipod?
    I see my apps from itunes and I'm hoping they have the data saved from my last sync, but I'm worried if I start over with a 'new' ipod, they won't transfer over for whatever reason.
    (...though judging by all the forum posts on how iOS4 is pure evil, waiting doesn't seem so bad..)
    Thanks in advance!

    Perfect!
    Thanks for the quick answer!
    Cheers.

  • What happens to the music files when I delete iTunes?

    OK, I have iTunes and over the years I have moved files about and tried to organize and back up stuff! And now it seems like I have three of each track showing in iTunes. Some of these, when you click on you get an exclamation mark and a file can't be found! Now to go through it one would be labourious and very very time-consuming.
    So if I straight up uninstall, and hunt down any reference to iTunes on my PC, what will happen to all my music files? Do they go in the uninstall? Am I best backing them up to another hard drive for safe keeping first? (I'll probably do that any way) Or are they safe where they are until I reinstall iTunes? Will this fix my deadlinks and duplaicate problem?
    Many thanks

    Am I best backing them up to another hard drive for safe keeping first? (I'll probably do that any way) Or are they safe where they are until I reinstall iTunes?
    Uninstalling iTunes will not delete your music files.  However, other things will, such as a hard drive failure or physical damage.  So yes, you should always have a backup of your valuable music.

  • What happened to the Help files?

    My downloaded Aperture Trial has an empty Help menu.
    Anyone know where the documentation went? I can't find the keyboard shorcut PDF, the book, etc ...

    But it is a mistake. It should be included, but it is another 27MB. And the samples also seems to not be included.

  • FCE log and transfer goes from avchd to prores which then requires rendering down to AIC -- what's with that??

    Someone gave me a Sony camera (HDR-CX160) to try to get some footage out of...
    Log and Transfer worked fine, but the resulting files in Capture Scratch are ProRes.  When I add them to the timeline, it requires rendering (Lengthy rendering), presumably to convert to AIC.
    How can I get Log and Tranfer to go straight to AIC??

    Do you have FCS or FCP-X installed on the same computer? Also, the HDR-CX160 is capable of shooting 60p which is not Log and Tansfer, or FCE compatible. You need to make sure the camera is recording 1080i60.
    Anyway, try this:
    Open Log and Transfer, and click on the gear in the upper/center portion of the pane to select preferences:
    When the preference open, navigate to AVCHD Plugin and choose Apple Intermediate Codec.
    Then try importing your files.
    MtD

  • Log and Transfer w/ Sony HVX - problems

    I loaded the log and transfer window with all the footage and added it to queue. Once it was finished transferring every clip shot at 59.94 had a "half-circle" icon next to it, meaning some frames were not captured. Every clip is short about 16 frames.
    But the stuff shot at 23.98 all came in fine and with the "full circle" icon.
    Anyone seen this before?

    I have resolved the issue. Let me explain what happened.
    My 59.94 footage was being transfered to FCP as 23.98. Also, in the log and transfer window my clips had a "half-circle" next to them instead of the usual "full circle". The cause of this was in Preferences, the Remove Advance Pulldown and Duplicate Frames option was checked. After unchecking it, I retransfered the clips perfectly fine.

  • Mavericks and Final Cut Pro 7 - Log and Transfer crashes

    Hi all. I (perhaps unintelligently) upgraded to OSX Mavericks on my Mac Pro while working on a project in Final Cut Pro 7. What is good news is that FCP 7 still works for the most part. The bad news is that Log and Transfer crashes.
    I have a Panasonic P2 camera and I dump video via FireWire 800. When I first click on the Log and Transfer button, nothing happens. When I click on it again, the Log and Transfer window opens, but then FCP 7 crashes.
    Is there any way to get video from my P2 card into the project without Log and Transfer?
    Also, would any of these options work?
    Trash preferences (working to figure out how to do that on Mavericks)
    Worst case, re-format and re-install Lion (Don't have much time to do that)
    Please let me know if you have a work around or a fix for this. I need to have this solved TODAY.
    I appreciate your help in advance.

    I am having the same issue on my iMac that was udated to Mavericks a while back and apparently I haven't tried to log and transfer anything since.
    The error comes up everytime I have a my Sandisk High Speed Card in my lexar Fire Wire 800 card reader. The Log and Transfer screen pops up and it starts adding the clips and instead of populating the screen, it crashes. Mine also says FCP quit while using the canonIHL plug in, here's a screen shot of the indication.
    I agree, this needs to be resolved ASAP. I'm dead in the water. The only thing I can do is transfer the raw files into a folder somewhere, then import the clips, but then to have them as ProRes files I guess I would have to use compressor before hand. I've done it before, but it never runs as smoothly without it being natively imported.

  • RAD Ingest FCP Log and Transfer freeze

    Greetings all, I am having problems using the Log and Transfer window in Final Cut Pro 6.0.5 on the IMAC system (Imac Intel Core 2 Duo 4 G 667 MHz Ram) I'm using- basically when I open it, at first it doesn't even open, then when I try opening it again, it shows up but has RAD Ingest written at the top, and the pane is frozen. It doesn't crash FCP but I can't close the window again. I don't have FXInstaller installed, so that's not the problem. All the P2 Media is on drives- its on a RAID mirror drive (I also read this could be a problem so I moved some of the media to another Firewire drive, and took the raid drive offline but it didn't make a difference).
    I've reinstalled FCP twice now, the version I had was 6.0 and then I used software upgrade to upgrade it to 6.0.5. The OS I'm installing on is 10.5.6. On a side note, on my laptop, I've got OS 10.4.9 installed and FCP 6.0.5 and Log and Transfer works fine. I'm thinking it might be an OSX version problem because this has happened on another Mac laptop that has 10.5.6 on it. Any ideas on what it could be? I'm kind of at wits end....pulling my hair out kind of deal!
    Thanks for any input!!
    Alexandra
    Message was edited by: xandradeg

    Hi David,
    I have 4GB Ram installed, and the footage is P2 Cam footage that was copied on to the hard drives during the shoot. I transferred the P2 footage with Duel Adapter, not from the camera directly. Some of it is also AVCHD footage from mini HD cam. I've been using my laptop (Macbook Pro, OS 10.4.11, 2G Ram with FCP 6.0.5 installed) to bring in footage, and Log and Transfer works fine with the same footage but doesn't work with this iMac. I was hoping to stop using my laptop so I can do everything on just the iMac.

  • Log and Transfer not working at all

    I'm really frustrated by the Log and Transfer procedure. Does it actually really work?
    I have some HiDef video on an SD card, (no mixed media, just the video files) and the Log and Transfer option WILL NOT bring any of the files in. They are all AVI files, 720p, readable/playable by QuickTime, even readable and usable by FCE if I drag and drop each file, although to watch it without stuttering, I need to render it. The video is from a D-SLR (Pentax K-x to be exact)
    But I want it in a native format so after it brings it in, I don't need to re-render it every time I move or trim it .0001 seconds in one direction.
    When I try and do the Log and Transfer procedure, I get the error message that :
    "xxxx contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
    No support for 720p AVI files? Seriously? That just can't be right.
    I have tried selecting the top level mounted object as well as selecting various directories drilling down into the card's data. Same error message every time.
    I have also tried selecting various "Easy Setup" configurations. None made any difference what so ever.
    The manual seems to suggest that you just select the media object and the magic happens. What the heck is going on? Any ideas?

    Hi -
    FCE currently supports 3 types of media directly:
    !http://www.spotsbeforeyoureyes.com/FCEOpenTimeLine.jpg!
    The latter two types, HDV and AVCHD it supports by converting the video format to Apple Intermediate Codec (AIC) during the ingestion process.
    The video that your camera makes is none of those formats, so you will need to convert the video to a format that is usable in FCE natively. This is why you are unable to use Log and Transfer. In order to use Log and Transfer, you would need to have video that conforms to the AVCHD standard.
    You can manually convert your video files by downloading MPEG Streamclip (free) from
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    and converting your video to AIC 720P.
    Then use easy set up in FCE for HDV 720P and manually import your files by going to the menu File > Import, or simply dragging the files from the finder to your FCE browser.
    You don't mention what frame rate you camera shoots at, but FCE only works with standard broadcast frame rates (29.97 fps), so it won't be able to use 24fps material.
    You would need to use Final Cut Pro to natively support that.
    Hope this helps.
    MtD

  • AVCHD and Log and transfer problems

    Ok a while back we purchased a Sony NX5 and until now I haven't had to shoot any major projects with it. But every so often I have been shooting bits and pieces for our stock library. However we also have a secondary JVC GY-HM100 camera that can use the same SD cards as the NX5. So sometimes I'd shot onto a SD card in the NX5 and maybe swap it over to the JVC on another occassion.
    Well I started to run into some issues that I initially thought was a result of using the same card in both cameras. The issues were that when I brought the NX5/AVCHD rushes in FCP through Log and Transfer the clip numbers wouldn't make sense, either I'd end up with duplicates or they would suddenly jump by 200-300 increments.
    So to try and get to the bottom of this I shot an interview last night, but before starting I fomatted the 32Gb SD card in the NX5. The only thing that happened thereafter was at one point in the proceedings I lost power to the camera (loose cable), but it was not while recording.
    So this morning I pull the rushes into FCP via Log and Transfer (L&T). The way I personally do this is to copy the whole AVCHD folder on the SD card onto my Mac hard drive and thereafter point L&T to that loctaion. Incidentally when I did copy the AVCHD folder across, inside there were 38 files in the STREAM folder starting at 00000.MTS going up to 00037.MTS.
    So next I fire up FCP and point the L&T windon at said AVCHD folder on my hard drive. At this point inside the L&T window it is showing 76 clips (not 38), ie for the first half of the list it shows clips 1 - 38 followed by (further down the list) another 1 - 38 again. Both sets of clips seem identical according to what I can see on the little thumbnails.
    So none the less I let L&T convert them to ProRes and guess what clip numbers it produces in my FCP Browser window? Clips 3 - 38 followed by Clips 290 - 329. Ironically clips 328 and 329 are the same as clips 290 and 291... which also happen to be the same missing clips 1 and 2 from the 3 - 38 range.
    This is just driving me nuts, I can't possibly work on major projects with this going on!
    I have to shoot 2 more interviews tonight so can someone give me an idea of what is happening and how I can correct it?

    Thanks... and rats! Do you know whether something like Clipwrap will resolve my issues, or some other flavour thereof?
    Thanks again, at least I know that it's not me doing something ultra dumb!

Maybe you are looking for