Log and Transfer Window unable to access all the files that were stored a P2 card

I have a 64gb P2 card that was filled to capacity (63.09gb) on a recent shoot with a Panasonic HPX170 camcorder.  An addlitional 16gb card was in the second slot.
I transferred the files from the 64gb P2 card to my iMac as usual, and did not see any files to transfer on the second card.  When accessing those files in FCP 6.0 I only see part of the files with the last one listed as "incomplete".  Four files that I see in the P2 card transfer folder do not show up in the Log and Transfer.   The LASTTEXT Clip file was transferred with a 3:07pm time, the inaccessible files end with a 3:06pm time.
I have the original 64gb P2 card in tact so I re-transferred all contents to my computer and into a new folder.   When I opened a new project to see if I could access all the files, only the files I previously was able to access came up. 
Have I created a FCP Log and Transfer and just need to reset something in FCP?  Is there a way to recover the data/restore a path to the data via FCP so I can access all the  files or is that a Panasonic issue? 

Oy,  If it's the second or first half of a spanned clip that's missing, FCP will not import, and the camera cannot repair.  There is nothing to repair, according to the camera. Files are just missing.
There are third party MXF software options that allow FCP to import the P2 files natively, without converting to QT.  I wonder if they will see the MXF files, or if they too need the complete file to do so.  I think most have demos. 
Calibrated Softare has MXF import:
http://www.calibratedsoftware.com/products.asp
Then there's MXF4Mac:
www.mxf4mac.com
And Raylight.
http://www.dvfilm.com/raylight/

Similar Messages

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

  • Recently, my laptop has been taken and therefore i can not access all the music that was on my old computor, although the music is still on my Ipod, how do i retrieve the music and put it on my new laptop???

    My laptop has been taken and becuase all the music bought from itunes is loaded on to the computor, not the account, i can't access all the music I've previously bought, on my new laptop. I still have my Ipod though and the music is stil on that, how do i transfer the music to my account on my new laptop ??? , xxx

    check out this post by Zevoneer.

  • I've lost all the files that were on the desktop.  All the folders  are still there with subfolders but the files have all disappeared.  Someone please help!

    It's been over a month since I accessed my files for work. (microsoft office, photos, videos) Today when I came in to work I realized that all the files on my desktop had disappeared. (it's just the desktop) I didn't do anything with my computer.  I didn't use my computer for almost the entire month.    I don't know where they are or what happened.  I really need these files back ASAP..... help please! 

    Unless the files were dumped in the Trash unintentionally, your files are still on your computer, somewhere. It's pretty easy to put files or folders in places without knowing it, but there is a good technique to find your data.'
    Think over a file or folder whose name is familiar. Then, press Cmd-Space at the same time, which brings up Spotlight - the easiest way to locate files, folders, history, and much more. If you end up with a blank the first time, try again until you have a hit. If you have a hit, note the location of the files/folder; it's likely that all of your lost documents are in the same place.
    Post if you have success, or need more help!

  • I recently received my new iPhone 4 from my carrier since my old one was stolen. I restored my new iPhone from my old iPhones iCloud back up but now all the pictures that were stored in my old phone are blurry in my new phone. Please help!

    Luckily, using the "Find My iPhone" app, I was able to scare the thieves into bringing my iPhone back to the place they stole it from (Dave and Busters..on my BIRTHDAY OF ALL DAYS). So now, $169 later (deductible for replacement iPhone), I have both my 1st iPhone and my replacement. On my first iPhone, I have all of my pictures saved and they are very clear, but when I restored my replacement iPhone from my original iPhones iCloud backup, all the pictures that I took in my original iPhone are blurry! I thought about backing up my original iPhone through iTunes and then resetting my replacement iPhone and restoring it from my original iPhones settings but I dont want to lose all of my new pictures I took. I know this sounds confusing (well, it looks confusing, since you cant actually hear me) but I could use all the help I can get! 

    BarnsleyMif wrote:
    I have recently updated my software on the new iPhone and when it backed up it backed up to the old iPhone
    No such thing has occurred.  iPhones do not backup to one another.
    It is not possible to backup a different iPhone from the one being updated.
    If the iPhone was restored with a backup from a different device, restore it again from the correct backup.
    BarnsleyMif wrote:
    how can I get all my new stuff back and stop it from happening again?
    Pay attention when restoring the iPhone and select the correct backup to restore from.

  • Can't access the Logging Items section of the Log and Transfer window.

    Yesterday I was able to select and ingest clips and rename clips from my Canon Vixia SFH11 camcorder using the logging items section of the log and transfer window in FCP 7. Today, that section of the L&T window is gone! and every time I try and change a clip name or rename a clip it either ignores the change or it tries to save the new clip with a higher numbered name (ie. Clip #102, Clip # 103).
    I know if must be a setting that I am missing or a procedure I skipped.
    I want my logging items section back!
    I've restarted and tried rebooting to no avail. Anybody have a clue?

    Hi -
    If you are missing both panes of the Log and Transfer window, you may have swiped the dividing bar over to the side to display one pane only.
    Place your cursor over the bar on the side (you'll see the cursor switch to a reposition indicator)
    !http://www.spotsbeforeyoureyes.com/L%26TPreWindow2.jpg!
    and pull it back to the middle:
    !http://www.spotsbeforeyoureyes.com/L%26TPreWindow1.jpg!
    Hope this helps.

  • [svn] 3214: Make sure we clean up all the files that javacc generates.

    Revision: 3214
    Author: [email protected]
    Date: 2008-09-15 15:48:27 -0700 (Mon, 15 Sep 2008)
    Log Message:
    Make sure we clean up all the files that javacc generates.
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/services/messaging/selector/build.xml

    Ok, this is a rather complex scenario and I'm not quite sure if I got the correct picture of what you're doing, so maybe I'm going in the wrong direction with this...
    First of all, you should distinguish between threads and processes. A thread is a strand of program execution within a process. A process is an application running on the operating system. Your java application is a process, and it may include several threads. Runtime#exec(...) will actually invoke a process, that is, it will start a program which runs asynchronously and (more or less) independant from the JVM. You'll need to wait for this process to finish before proceeding with the next script. Runtime#exec(...) will return an instance of Process, which provides the method Process#waitFor() to do just that.
    Looking at your code except, you don't really have to start a separate java thread for what you're doing. Your main thread will immediately block and wait for the worker anyway, so you might just invoke Runtime#exec(...) directly.
    By the way, if you want to wait for a java thread to terminate, there is a better way of doing it than looping while the thread is still alive. The Thread#join() method will block until the target thread terminates.

  • Camera is not Appearing in Log and Transfer Window

    Hello All,
    I feel like I should be able to solve this on my own, but I'm stuck. I've been using a Cannon HF S10 (AVCHD) for a few months. Up until about a week ago when I have connected the camera to my iMac and opened the Log and Transfer window all of the clips on the camera have appeared, but now they don't. I had this happen another time with a different camera and and after trashing the FCE preferences I was able to see the clips in the L&T window. So I trashed the FCE preferences, but this time I still do not get the clips in the L&T window.
    The camera mounts to my desktop and also appears in Finder, so I tired clicking on the "Add Folder" button on the top left corner of the L&T screen and adding "CANNON". This did not produce the clips in the L&T widow. I also tried to add the folder that is one level down labeled "AVCHD", but this did not work either.
    Any direction would be greatly appreciated. Thanks, in advance.
    Marc

    Ok...nevermind. All of the thumbnails appeared. There are a lot of clips on the camera, so I'm guessing that this is the reason for the lengthy loading time.
    Marc

  • AVCHD Clips Showing Up Black in Log and Transfer Window

    I'm doing some work for a client with some footage shot on a Sony NX5U. I'm trying to ingest the AVCHD clips into FCP 7.0.3 via the Log and Transfer window. I can pull up a list off all the clips in L&T and some of the clips work. Numerous other clips though, just show a black screen and have no audio. You cannot play the video in the preview window, although the box that shows the duration of each clip does show a time for each clip selected, so it must see something there. If I try to add any of the problem clips to the transfer queue, it tries for a few seconds to transfer the clip, then it gives the error with the red exclamation mark and stops. All the other clips transfer fine.
    I'm fairly certain that the problem is something with FCP because I can load the same clips into adobe premiere without any issues. I can also watch all of the same files in VLC player, so the problem doesn't appear to be a corrupt file or anything of that sort. I've tried the same steps and had the same results with the files on a memory card and the files copied off to my hard drive. I did receive the memory card from the client and did not shoot the footage myself, so its possible that something was messed up on his end, but the file structure appears to all be in tact, as near as I can tell.
    Here are a couple things I've already tried that didn't appear to help
    --Trashing the preferences to FCP
    --Switching the transfer codec from Apple Pro Res to AIC
    --Changing the scratch disks from an external hard-drive to the internal drive
    Any suggestions anyone could offer would be greatly appreciated! I have transferred footage off this camera before with no issues, so I'm not sure why it's having problems now

    we're all the files shot in the same format?  Not all formats are compatible with fcp.  If you can bring the files into premiere, you can use the adobe media encoder to convert to prores and then work with them in fcp.  The interface on the adobe media encoder is not particularly intuitive at least in CS 5.5.  I use it for this kind of thing every few months and every time I have to figure it out again.  May be early onset alzheimers, but I don't think so.

  • Canon HF11 not showing up in log and transfer window

    I am using FC Studio 6.0.6 and a Canon HD USB camera. The camera does not show up in the log and transfer window. It shows up on the desktop, works with iMovie '09 but not FCP. If I try to select files from the camera they are greyed out. Strange thing is is that it works fine on my iMac just not my MBP. I have trashed the FCP and Quicktime preferences but this did not help. HELP please.

    I also am wondering what you mean by "file structure"? Do you mean the AVCHD files or something in FCP?
    If you look for a particular file on a drive, there's a file structure or "path" to get to it. For instance;
    Macintosh HD > Users > Nick > Documents > FCP > Projects > My latest project.
    If I don't follow that path, I won't get to the file I am looking for.
    Similarly, Final Cut Pro is expecting to see a certain path to the actual video files on your camera's Flash drive. If a folder name along the way is missing or had it's name changed, the path is no longer valid.

  • AVCHD Import Error In Log And Transfer Window

    Hey,
    I just bought FCE4 and also a canon hf100 camera. When i try to ingest clips from the camera (in avchd format) with the log and transfer window an error icon comes up and says : "error: no data" and the file is not successfully imported. I tried switching my audio preferences to normal stereo instead of matrix but that did not help.
    Any help would be great!
    Jackson

    What format exactly did you shoot with that camera? What settings are you using in FCE?

  • Why does Final Cut Express 4 quit automatically when I open Log and Transfer window?

         I'm using a Sony NXCAM and I am editing on a Mac OS X. The clips I have recorded are in MTS format so I understand I must use the Log and Transfer setting to import my clips. I plug the camera into my computer, go into Final Cut Express 4, turn the camera on, and then go into the Log and Transfer window. Once I open that, Final Cut quits and an error message pops up that reads, "Final Cut Express quit unexpectedly." Final Cut quits too fast for me to even click on anything in the Log and Transfer window. I really don't understand why it does this. The only thing I can think of why Final Cut is quitting is because I have over 100 clips on the camera, so maybe that is too much for Final Cut Express 4 to handle. However, I wouldn't think that would be the case. If anyone knows of anything I could do to fix this problem, then please send me a reply. I've looked around the internet to see if anyone else has had this problem, but I haven't found anything. Thank you, any responses will be greatly appreciated!
                                            -Snowconedxx39

    Shooted videos directly saved to the SD memory card is no problem, the log and transfer window immediately recognizes the sd card and I was able to convert the videos. I will check later today if this were 25p, 50i or 50p footages.
    Strangely enough is that transferring the .mts files from the internal memory to the sd card (using the Mac finder, I don't know if it is possible within the camera itself) won’t help, the log and transfer window doesn't the recognizes the transferred files, strange!
    I hope that this problem will not occur using Final Cut Pro X, which I will start using soon.
    I'm curious what the exact problem will be.

  • How do I select ProRes 422 on Log and Transfer window?

    I went to preferences in upper right of log and transfer window, saw ProRes 422 was listed there but, still not seeing my clips after ingest say ProRes 422.
    I have Capture preset also set to ProRes 422 in FCP 6.06

    Yes, it only has that choice of ProRes 422 but, its not in that format after ingest.
    I select TRANSCODE TO and it only has Apple ProRes 422 check marked.
    Format says HDV1080p30 under compressor column in my log in Bin not ProRes422.
    Wish I knew why its not importing correctly.
    24p imports and converts to ProRes422 perfectly but, Im in 30p on this project.

  • Cannot reconnect to Canon HF11 in Log and Transfer window

    I am using a Canon HF11 HD camcorder with FCEHD and was able to view, log and transfer clips into FCE without a problem. I saved the project on FCE but when I came back the first time, it told me that several clips were missing and could not reconnect to the media. When I came back a second time, now it will not recognize the camera in the log and transfer window. Anyone else had a similar problem? Any suggestions would be great.
    Thanks

    I was having the same issue with a Canon HF S100. What seem to work for me was connecting the camera AFTER I opened the Log and Transfer window. Read my complete description on this thread, http://discussions.apple.com/thread.jspa?messageID=9573812#9573812.

  • The log and transfer window???

    where is the log and transfer window to import media from my Sony HVR-DR60 drive

    Grant
    Under file use Import from Camera or Command I.
    I have been able to do so using a Canon Vixia HV 30 & 40 HDV firewire camera.
    It imported my footage without any problem.
    Russ Andris

Maybe you are looking for

  • Installed Windows 8 now can't get into Mac OS

    NOOB MAC USER NEEDS IMMEDIATE HELP TO GET MACBOOK PRO WORKING AGAIN FOR SCHOOL!!! I'm a bit of a noob when it comes to Mac's.  I recently installed Windows 8 Consumer Preview Release on my desktop and thought it was really neat.  The thought popped i

  • Restore needed but wont restore HELP PLEASE

    my iphone keeps saying restore needed, iphone can not make calls or recieve calls restore on itunes phone says no service all the time, but iphone will not restore on itunes loads half way then stops, ive even tryed to restore settings on my phone ma

  • War files and server classpath on 6.1

    We used to have all of the jsp's and html exploded in a WebApp and the           WebApp just used the same classes and property files the server was using,           now we put all these files in a war file.           My question is do I have to take

  • Use of WPA wireless secuity on 10.2

    I just picked up a used G3 iBook with an airport card for my kids to check e-mail and for web surfing. I cannot get the iBook to log on my wireless network (a Netgear b/g wireless router) when I have the WPA security active. I would prefer not to use

  • I am trying to update Photoshop & Premier Elements 11 and get this Error Code: U43M1D207

    I am trying to update both Photoshop & Premier Elements 11 and get this Error Code: U43M1D207. Can anyone help ?