Log and Transfer:XDCAM

Is it possible to set up the Log and Transfer to convert the footage to XDCAM instead of ProRes?
Thanks in advance.

You will not be able to transcode directly to ProRez, you will just use Log & Transfer to rewrap these XD Cam files into quicktime .mov files. If you are looking for a solution to export from the timeline back to XD Cam then open the File/Export/Sony XD Cam method.
Good Luck
Z1

Similar Messages

  • Log and Transfer - XDCam to Pro-Res

    Does anyone know a way to transfer XDCam footage directly to Apple Pro-Res using Log and Transfer?
    Thanks,
    M

    Thanks meg. I'm trying not to have to sync all the rushes in a timeline. All rushes are in the one 58 min prores file. I wanted to, I guess, log and capture the rushes as clips that I logg in the log and transfer winnow and that it would then log and sort out the material as proxy files. I'm guessing I'm just being lazy or it can't be done. Thanks for the reply but I was looking for a differentbway round than a straight import of the whole file.
    M

  • Refresher for log and transfer in FCP 7

    Hi,
    I need a bit of a refresher to using log and transfer in FCP 7 what setting do I use for XDCAM ? Do I set it to AVCHD?
    Please help
    Thank you
    Jeff

    Have you loaded the xdcam plug in?
    https://discussions.apple.com/docs/DOC-2721
    Otherwise, I think you have the choice of keeping it as xdcam or converting to prores when you log and transfer. xdcam are smaller file sizes, while prores is generally less taking on the system.

  • SONY XDCAM LOG and TRANSFER CRASHING FCP

    I am trying to log and transfer xd cam footage. every time i open the log and transfer window, FCP crashes. What is the cleanest way to get rid of the xdcam plugin.
    the error message reads:
    The application Final Cut Pro quit unexpectedly after it was relaunched. The problem may have been caused by the SonyXDCAM plug-in.
    I have tried to get rid of it and obviously failed because i keep getting that message which tells me it's still there.
    Can someone give me a step by step on how to get rid of it?
    Model Name: Mac Pro
    Model Identifier: MacPro3,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3.2 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 12 MB
    Memory: 8 GB
    Bus Speed: 1.6 GHz

    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
    http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

  • Issue with XDCam log and transfer update

    I'm trying to install Sony's XDCAM EX Log and Transfer Plug-in, and only can get as far as the "Destination Select" tab, where I'm informed that it "can't be installed on this disk. Final Cut Pro 6.0.3 or higher is recommended for this software."
    I just installed Final Cut Pro 7 yesterday.
    ... what gives? Do I even need this update to be able to manage the videos from my PMW EX1r? I was unable to use them in final cut pro when I tried earlier, and was led to that "Log and Transfer Plug-in" from Sony and told it was the solution, which now won't allow me to even install it.

    You have a number of options, make sure you have the latest Sony XDCAM EX Log and Transfer plug in (v1.2) also grab Sony's XDCAM Transfer (v2.12) which you can use instead of the aforementioned L&T plug in. Plus there is Sony's Clip Browser app (v2.6) for checksum validated offloading of the media from the camera/cards ... and now there is a brand new app called Sony XDCAM Browser (v1.0) which is designed to combine/consolidate the functions of the various utilities into one single handy dandy app. Unfortunately in this first release it has far inferior functionality as compared to what can be managed with the separate apps.
    All of the above can be most easily downloaded (requires no registration) from Sony's Canadian website:
    http://support.sonybiz.ca/esupport
    Hope it helps
    Andy
    Andy

  • Log and capture or Log and transfer?

    I'm a newbie to FCP, I've been working at it and researching, so I have a basic understanding, been able to do some good stuff, now I'm looking to find more time-economical ways to do things.  I'm a football coach, looking to cut up game films into individual plays (1 play per clip), and ideally being able to name each clip by it's play name "Trap" or "Pop Pass" for example.  It looks like I need to get into logging if possible.  My workflow at present when dealing with an opponent's film is to take a DVD, and get it onto my computer using MPEG Streamclip.  I've been using DVC-PAL as a codec at someone's suggestion, I can't rmemeber where I got that.  Is this a mistake?  Anyhow, I now import that movie file into FCP using File>Import.  At this point I can't do any logging though, if I try Log and Capture or Log and Transfer I get "Unable to initialize video deck", though it tells me I can still use Capture Now.  Once it opens the Log and Capture window, I get "Error: this operation requires a controllable deck."  and directs me to the Audio/Video Settings.  Here's where I'm pretty much lost.  Do I try to adjust settings from here?  If so, to what?  Do I need to start by changing my MPEG Streamclip settings and then trying to match those up in my FCP Audio/Video Settings?  Or do I need to completely overhaul the way I'm approaching this?  ARGH!  I've been impressed with myself getting to this point, any help from here would be greatly appreciated, thanks all!
          Grouch

    Log and Capture is used if you are capturing footage from tape based formats.  DV, HDV, HDCAM...others.
    Log and Transfer is for tapeless camera systems.  P2, XDCAM, Canon DSLR, AVCHD. 
    If your footage comes from DVDs...and you convert the footage to QT files...then you simply go to FILE>IMPORT.  You don't log with this method.  Just import and work with the footage.

  • FCP Log and Transfer Bug(s)

    FCP 7 doesn't seem to like XDCAM EX very well.
    After installing the Sony plugin.
    Any attempt to FF through footage produces the opposite - Reverse.
    I am also currently unable to clear the Transfer browser of mounted clips/volumes.
    Repairing permissions did nothing.
    Are we looking at trashing FCP prefs ...?
    Never had to do that with 7.0.3.

    https://discussions.apple.com/docs/DOC-2491
    Are you using the keyboard or the controls on the log and transfer window?  If you're using the keyboard, do they perform properly with captured clips?

  • Log and transfer--sony ex1

    hi, just shot with ex-1.  all stuff from the sxs card now on external hard drive. i downloaded the XDCAM transfer 2.12, rebooted and yet when i go into log and transfer and navigate to the folder, it says unsupported media. any ideas??? thanks

    Don't know. I have been using XDCam transfer ever since we switched to XDCam and EX cameras.
    That is the way it works for me. XDCam Transfer has all the functionality of Log and Transfer, you can trim clips and rename them, etc. prior to ingest. The native EX and XDCam are not directly supported in FCP. You need to have the EX files into a format that is supported by FCP, and XDCam transfer does that.
    It works well and fairly quickly.
    MtD

  • Problem with Log and transfer using AVCHD

    Hello,
    I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
    I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
    I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
    I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
    I will appreciate your help!
    Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...

    OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
    So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
    Edited the entire project there...kinda sucked...
    Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
    So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
    So it working again...here I go editing on FC after I edited the entire project on Imovie...
    Thanks for all your help!

  • Log and Transfer to edit... How do I save to a hard drive?

    I have a new Canon XA10, and I use Log and Transfer to download my videos to my computer and edit. How do I save them onto an external hard drive as to not take up so much space on my computer?

    I was going to say to set up your scratch disk, but you are using FCPX, and this is the FCS forum... I don't know how the other program functions so you'll want to post in the correct forum.
    https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

  • Working with AVCHD: Log and Transfer FAQs

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Working with AVCHD: Log and Transfer FAQs
    Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
    What should I know before attempting to ingest my footage?
    The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
    AVCHD support is available only on Intel-based Macintosh computers.
    AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
    DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
    Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
    Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
    When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
    AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
    Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
    Which specific formats can be ingested by Log and Transfer?
    Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
    Which Easy Setup preset should I select before ingesting my footage?
    It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
    AVCHD-Apple Intermediate Codec 1440x1080i50
    AVCHD-Apple Intermediate Codec 1440x1080i60
    AVCHD-Apple Intermediate Codec 1920x1080i50
    AVCHD-Apple Intermediate Codec 1920x1080i60
    If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
    Why don't my clips appear when I open the Log and Transfer window?
    Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
    If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
    If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
    First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
    Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
    I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
    There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
    Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
    My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
    This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
    In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
    Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
    After doing so, hit OK and try to ingest again.
    I am experiencing a problem that is not covered in this tip or the solutions here do not work.
    The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
    This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Working with AVCHD: Log and Transfer FAQs
    Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
    What should I know before attempting to ingest my footage?
    The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
    AVCHD support is available only on Intel-based Macintosh computers.
    AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
    DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
    Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
    Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
    When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
    AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
    Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
    Which specific formats can be ingested by Log and Transfer?
    Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
    Which Easy Setup preset should I select before ingesting my footage?
    It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
    AVCHD-Apple Intermediate Codec 1440x1080i50
    AVCHD-Apple Intermediate Codec 1440x1080i60
    AVCHD-Apple Intermediate Codec 1920x1080i50
    AVCHD-Apple Intermediate Codec 1920x1080i60
    If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
    Why don't my clips appear when I open the Log and Transfer window?
    Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
    If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
    If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
    First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
    Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
    I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
    There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
    Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
    My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
    This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
    In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
    Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
    After doing so, hit OK and try to ingest again.
    I am experiencing a problem that is not covered in this tip or the solutions here do not work.
    The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
    This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

  • I need to know best way to edit MXF files, with least rendering, is that converting the MXF or Log and Transfer? the end product is dvd, but I have lots and lots of these projects to do.

    I am about to comence my Edit, and was told of Mpeg Streamclip, however this doesn't seem to work with my Canon XF305 Clips, the reason I was told to use it was so I wouldn't have to Render in Final Cut Pro all the time.. I do have the Canon Disc with the Plug in Utility and the update from their site.
    Is it best to Convert these MXF files first and import them into FCP or use 'Log and Transfer', so far I am unable to do either!!
    The projects on the timeline will have introduction .Movs already on it as a Template to re-use again and again with the new Footage ( MXF Files ) to be added and edited with transitions etc..This process is repeated again and again but with different MXF clips each time.
      I am looking for the quickest and best way for workflow as there are 80 or more projects to do, each with 10 or so clips to be added to the timeline and Exported for DVD...Will I have to then Compress to fit onto DVD's??
    I know Streamclip is an Mepeg 2 app but I thought the Canon XF305 Shot as mpeg2....
    Is Log and Transfer my only Option?
    Basically I need to know the quickest for Render purposes, and of course, the best way so the files aren't so huge etc etc.
    Please, any suggestions would be greatly received....

    We only work with PR422 files in FC7.  We use Shane's workflow with all 5D & MXF footage.
    Make your life easier and stick to the ProRes family for your footage and edit sequences. Avoid H264 & convert any you have to ProRes.
    Unless you are considering Blu-Ray the only way to deliver video on a DVD is to convert it to SD.
    Depending on the length of your show you can make a Blu-Ray in Compressor but you have very limited authoring options when compared to DVD Studio Pro.
    Compressor can also convert your HD to SD mpg-2 & Ac3 files. The best results usually come from setting the frame controls in the mpg-2 setting of Compressor to best. Depending on the the length of the show and your Qmaster settings this can take quite a while.
    I personally find Compressor's HD to SD DVD conversion varies. Sometimes it is wonderful and sometimes not so much. I prefer the following as it is usually is faster and very consistent.
    Export a quicktime movie (not QT conversion) of your final sequence
    Import the exported HD file back into FC.
    Create a SD 16x9 sequence and then drop in the recently exported HD seq and render. Rendering the sequence basically has FC doing the HD to SD conversion. Export the SD sequence and then convert to mpg-2 & ac3 in Compressor. While this does take time I still find it faster than Compressor with Qmaster utilizing all cores.
    Another option is using jobs in Compressor
    http://pixelcorps.cachefly.net/macbreak-154-540p-h264.mov
    In this workflow you would have Compressor convert the HD file to SD and then through jobs convert the SD file to mpg2 & Ac3. 
    In theory the jobs version could be faster (based on a number of variables- length, Qmaster, etc) but I haven't had time to compare the two. 

  • Log and Transfer w/ Sony HVX - problems

    I loaded the log and transfer window with all the footage and added it to queue. Once it was finished transferring every clip shot at 59.94 had a "half-circle" icon next to it, meaning some frames were not captured. Every clip is short about 16 frames.
    But the stuff shot at 23.98 all came in fine and with the "full circle" icon.
    Anyone seen this before?

    I have resolved the issue. Let me explain what happened.
    My 59.94 footage was being transfered to FCP as 23.98. Also, in the log and transfer window my clips had a "half-circle" next to them instead of the usual "full circle". The cause of this was in Preferences, the Remove Advance Pulldown and Duplicate Frames option was checked. After unchecking it, I retransfered the clips perfectly fine.

  • A conclusion to ALL the AVCHD/.mts Log and Transfer Final Cut Pro 7 issues

    Hey all! Happy 2011!
    So this is my first post here and hopefully when this thread concludes with all your help we should be able to help a lot of people and save them the heartache that I have recently had to endure by stating these things in plain English. I have some questions at the end which I think could be answered very easily! Please, no gobbledygook!
    It would be great if people in the know can confirm/deny or comment on my points so those that are in a similar position to me can save their time and just get on with it.
    1) I have a Panasonic HDC-TM300 and it records in AVCHD/.mts files
    2) FCP 7 can deal with AVCHD files via the Log and Transfer feature if you do it straight from the camera or memory card and can convert to ProRes 422 (LT)?
    3) Log and Transfer _*DOES NOT WORK*_ if you move the AVCHD/.mts to an external drive without maintaining the folder structure?
    4) What is required from the folder structure that makes FCP act this way?
    5) Basically I have f*ed it by doing the part 3 above which I think is the most natural thing in the world to do! Im sure that many people have done the same thing as me please correct me if i’m wrong
    After a lot of research on the internet I have come up with the following solutions and in brackets my thoughts on them. If anyone has any experience with them please please let me and other people know so I can get on with my life and editing these files.
    a) Harass the people that make FCP 7.0 and make sure that the next update solves this stupid/idiotic/ridiculous oversight. (This could take a while but i think we should do it for the sake of future generations)
    b) Someone could let us know about a workaround to this that may be the folder structure that FCP needs to be able to do L&T (needs to be simple so that everyone can do it. This would be the best short term solution until part a is completed)
    c) Buy one of the converter programs such as ClipWrap, Toast Titanium or Aunsoft mts converter. If so which is the most/ least recommended and why? (Least desirable option due to requirement for extra program so extra faffing and extra cost).
    Thanks y’all and keep up the awesome work!!
    K*

    2) FCP 7 can deal with AVCHD files via the Log and Transfer feature if you do it straight from the camera or memory card and can convert to ProRes 422 (LT)?
    Yes.
    3) Log and Transfer DOES NOT WORK if you move the AVCHD/.mts to an external drive without maintaining the folder structure?
    This is true of ANY tapeless format.
    4) What is required from the folder structure that makes FCP act this way?
    This is due to the fact that most of them have files in those other folders in that structure that FCP needs to access in order to get all the proper components assembled properly. Sure, there are formats that have folders with nothing in them. Doesn't matter, FCP is designed to look at the full structure and work from that.
    5) Basically I have f*ed it by doing the part 3 above which I think is the most natural thing in the world to do!
    The most natural thing in the world is to NOT backup everything? Well, that might be the case, since this comes up so darn often. But, it is wrong. The full structure must be maintained. This is true of many tapeless formats and more than just FCP. Avid and Premiere need this for certain tapeless formats too.
    a) Harass the people that make FCP 7.0 and make sure that the next update solves this stupid/idiotic/ridiculous oversight.
    It isn't an oversight. It is designed like this on purpose. You need to learn how to do things right. You obviously know what that is now...keep the full card structure. So now it is up to you to continue to do things properly. Instead of insisting that an NLE conform the way it works to suit your needs.
    b) Someone could let us know about a workaround to this that may be the folder structure that FCP needs to be able to do L&T (needs to be simple so that everyone can do it. This would be the best short term solution until part a is completed)
    Easy. Shoot a small bit on another card. Look at the folder structure. Recreate that structure in your backed up footage. Often this will mean making folders with exact names, even if they are empty. But if they have files in them, even small ones, then the first backup you did might not work....because those might be some of the small files FCP needs in order to do the L&T process properly. Always worth trying though.
    c) Buy one of the converter programs such as ClipWrap, Toast Titanium or Aunsoft mts converter. If so which is the most/ least recommended and why?
    I highly recommend Clipwrap. Mainly because I haven't tried the others. But also because the author is always following the latest formats, and works hard to make sure his software works with them. It solved an importing issue I had with the Sony NXCam camera...within a week of me moaning about the issue.
    Want a tutorial to walk you through the tapeless workflow in FCP? I have one. Tapeless Workflow for FCP 7 Tutorial You might know most of this, but watch it for other tips.
    Shane

  • Unknown Error when I Logging and Transfer P2 Card files in FCP 6.0.6

    I have been trying for the past two week to Log and Transfer P2 files to my external hardrive using FCP 6.0.6 unsuccessfully.
    Originally I tried to Log and Transfer directly from the Panasonic HPX-170 in between my shooting. The first time it was a success but from then on I always get the same Unknown Error when attempting to transfer. When I encountered the Unknown Error during the second transfer I went on to create folders with the P2 contents on my external Hard Drive.
    When I drag any of the P2 folder content on the Log and Transfer window I can see all the clips. I can successfully transfer small B-roll clips I have but any big size file (all my interviews) return an Unknown Error symbol at the end of the transfer. I believe this is probably why I didn't encounter any issues during my first time.
    I tried deleting the preferences in FCP and then Logging and Transfer and it works if the systems settings are set for the Mac Pro but not for the external HD. The problem is I don't have enough space on my Mac. I have cleared 45GB of space but my P2 files total 54GB. I tried the same process with a Mac Power Book with FCP 5.1.4 and again in encounter the same problem.
    The external HD is a 1TB Western Digital that I have used before with FCP for editing but never before with P2 files. Its in good working order and has 79GB free space remaining. Both the camera and the P2 cards (16GB and 4GB) are also performing as expected.
    I would appreciate any suggestions.

    #36 - One or More P2 files failed to import.
    Shane's Stock Answer #36 - "One or more clips failed to import..."
    Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
    What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
    ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
    ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
    ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
    Shane

Maybe you are looking for