Log into a virtual machine on server 2012 r2 datacenter from a windows 8.1 client login
Hello,
I have set up a VPN on Windows Server 2012 r2 Datacenter using Hyper-V. Everything seems to be functioning ok using the Hyper V platform. I would like to know if it is possible to connect to a virtual machine on the VPN from a Windows 8.1 client using the
widows login and if it is then how to go about it. If I could have some links to tutorials etc I would be greatful. I have not been able to find anything and I have been looking for days. I would really appreciate some assistance. Thanks in advance.
Ed
Hi Ed,
I am sorry to say that I am not quite sure of your requirement. Is the Windows Server 2012 R2 computer a host server in Hyper-V? Did you mean that you want to RDP into a Hyper-V VM from a Windows 8.1 client? If yes, you need to allow Remote Desktop Connections
in guest OS. The network adapter type must allow communication with host machine and network discovery mode and the services supporting network discovery mode must be turned on.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
Hi all;
Please look at the following figures:
Any ideas?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi Everyone.........
I have virtual Server machine Current Running Server 2008 r2 data-center, and try to upgrade server 2012 r2 data-center but unfortunately not Upgrade and Showing Errors like below....
how to upgrade virtual server machine in server 2012 r2, Please help me for this Issue .I recommend doing a fresh install of Server 2012 R2 on the bare metal, enable the Hyper-V role and migrate the VMs over using these steps:
Shutdown the VMs on the current 2008 or 2008 R2 Hyper-V host(s)
In Hyper-V Manager, delete all snapshots and saved states of all VMs.
Set all the VM vNICs to use static MAC
Export each VM
On the new 2012 R2 Hyper-V server, import the VMs
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx -
APP-V 5.0 VDI A Temporary Profile is created when I log into the Virtual Desktop
Dear Sirs
I'm Enzo , an Italian System Engineer. Together with other fellows we created a test environment :
- a VDI machine (POC-VDI,10.102.94.219, Windows Server 2012 R2) with
RD Web Access, RD Connection Broker, RD Virtualization Host, RD Session Host Installed
The Hyper-V Environment includes :
- DHCP Server (to provide addresses to Virtual Desktop Collections)
- APP-V_5.0_Server , Application Virtualization Management Console 5.0, with 2 published packages (Office 2010 and Open Office 4)
- Sequencer_W8-1, Application Virtualization Sequencer 5.0
- Client_8-1 , Client Windows 8.1 with Application Virtualization Client 5.0
From the Client_8-1 we can download and run the two published packages from the server (user VDI_TEST_1)
The Client_8-1 has been used as the template (sysprep /oobe /generalize /shutdown) for the Virtual Dektop (APP-0 and APP-1)
included in the collection 'APPV' (Pooled, Automatically Manage Virtual Desktop, Roll Back Virtual Desktops Enabled).
I connect to the 'RD Web Access' ( http 10.102.94.219 RDWeb, user VDI_TEST_1) , I then connect to APPV collection .
When I get logged into the Virtual Desktop (APP-0 or APP-1, user VDI_TEST_1), a Temporary Profile is created. Why ?
We configured :
User Profile Disk : share Location 10.102.94.219 UPD
UPD : Share Everyone Full Control
Security SYSTEM Full Control
Network Service
Full Control
POC-VDI$ Full
Control
Administrators (POC-VDI\Aministrators)
Full Control
Users (POC-VDI\Users)
Read & Execute
I am puzzled as long as when I get logged into the Virtual Desktop, a Temporary Profile is created. Why ?
Thanks in advance for your kind attention
EnzoHighly unlikely it has anything to do with App-V.
Start troubleshooting by looking at permissions on shares and folder under the shares for the profile.
Tim Mangan MVP for App-V and Citrix CTP Author of AppV books: "The Client Book" and "OSD Reference Book" (http://www.tmurgent.com/Books ) -
How to Uninstall a failed Virtual Machine Management Server (x64) installation ?
Dear Technet Team,
I cannont uninstall the Virtual Machine Management Server (x64). Already tried it with the Installation Image. The Uninstalling process suddenly crashed without no error. I delete everything so far DB as well because it was never in use. So how can
I uninstall the Management Server. I did not install it a Cluster as well.
By the way i tried it with wmic but there i got "no instance available" error. I am stucking with this quite a while. I messed it up really hard so i think i must manually delete all regestry keys because i already delete some. Is there a way to
uninstall it Forcefully ?
Thank you!
Yours sincerely,
Tobias
I will Post the Log so maybe someone can help me.
2014-07-31T10:07:43.0139343+02:00 Always:
Trace Session Started
10:07:43:
10:07:43:Application Started
10:07:43:CheckForRemovableMedia: Folder C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager
10:07:44:CheckForRemovableMedia: Drive C:\
10:07:44:CheckForRemovableMedia: DriveType 3
10:07:44:CheckForDirectoryAttributes: DriveType C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager
10:07:44:CheckForDirectoryAttributes: FileAttributes Directory
10:07:44:CheckForRemovableMedia: Folder C:\ProgramData\Virtual Machine Manager Library Files
10:07:44:CheckForRemovableMedia: Drive C:\
10:07:44:CheckForRemovableMedia: DriveType 3
10:07:44:CheckForDirectoryAttributes: DriveType C:\ProgramData\Virtual Machine Manager Library Files
10:07:44:CheckForDirectoryAttributes: FileAttributes Directory, NotContentIndexed
10:07:44:OriginalInstallSource: E:\amd64\setup
10:07:44:CheckIfVirtualMachineManagerIsInstalled: Check whether VMM server is installed
10:07:44:CheckProductByUpgradeCode : found product with upgrade code {0B58D0F8-0532-469C-918B-B8A0A331001b} with version 3.2.7510.0
10:07:44:CheckProductByUpgradeCode: Installed Version 3.2.7510.0
10:07:44:CheckIfVirtualMachineManagerIsInstalled: VMM server found
10:07:44:CheckForRemovableMedia: Folder C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\
10:07:44:CheckForRemovableMedia: Drive C:\
10:07:44:CheckForRemovableMedia: DriveType 3
10:07:44:CheckForDirectoryAttributes: DriveType C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\
10:07:44:CheckForDirectoryAttributes: FileAttributes Directory
10:07:44:CheckIfVirtualMachineManagerIsInstalled: Check whether VMM client is installed
10:07:44:CheckIfVirtualMachineManagerIsInstalled: Check whether VMM web portal is installed
10:07:44:CheckIfVirtualMachineManagerIsInstalled: Check whether VMM agent is installed
10:07:46:Start adding DataItems
10:07:46:WebDeploymentTool
10:07:46:MicrosoftSystemCLRTypesForSQLServer2012x64
10:07:46:MicrosoftSQLServer2012TransactSQLScriptDom
10:07:46:MicrosoftSQLServer2012DataTierAppFramework
10:07:46:MicrosoftSQLServer2012ManagementObjectsx64
10:07:46:VMMServer
10:07:46:VMMAdministratorConsole
10:07:46:FinalConfiguration
10:07:46:Done adding DataItems
10:07:47:Adding Page SwitchPage
10:07:47:Enter Microsoft.VirtualManager.Setup.SwitchPage
10:07:47:Adding Page BlockPage
10:07:47:Adding Page ProgressPage
10:07:47:Adding Page FinishPage
10:07:47:Adding Page InitialInstallStartPageSwitch
10:07:47:Adding Page EulaPage
10:07:47:Adding Page ComponentsPage
10:07:47:Adding Page CeipPage
10:07:47:Adding Page CeipPageForAdminConsole
10:07:47:Adding Page RegistrationPage
10:07:48:Adding Page MicrosoftUpdatePage
10:07:48:Adding Page InstallationLocationPage
10:07:48:Adding Page PrerequisitesProgressPage
10:07:48:Adding Page AdditionalPrerequisitesPage
10:07:48:Adding Page SelectDatabaseServerPage
10:07:48:Adding Page ClusterConfigPage
10:07:48:Adding Page AccountConfigurationPage
10:07:48:Adding Page PortConfigurationPage
10:07:48:Adding Page WebPortalConfigurationPage
10:07:48:Adding Page LibraryConfigurationPage
10:07:48:Adding Page UpgradeInformationPage
10:07:49:Adding Page ReadyToInstallPage
10:07:49:Adding Page ARPStartPageSwitch
10:07:49:Adding Page ARPAddRemovePage
10:07:49:Adding Page ARPAddRemoveComponentsPage
10:07:49:Adding Page ARPRemoveDatabasePage
10:07:49:Adding Page ConfigInitialInstallStartPageSwitch
10:07:49:Adding Page ConfigRegistrationPage
10:07:49:Adding Page ConfigEulaPage
10:07:49:Adding Page ConfigCeipPage
10:07:49:Adding Page ConfigMicrosoftUpdatePage
10:07:49:Adding Page ConfigSelectDatabaseServerPage
10:07:49:Adding Page ConfigAccountConfigurationPage
10:07:49:Adding Page ConfigLibraryConfigurationPage
10:07:49:Adding Page ConfigReadyToInstallPage
10:07:49:Adding Page UpgradeStartPageSwitch
10:07:49:Adding Page UpgradeComponentsPage
10:07:49:Exit Microsoft.VirtualManager.Setup.SwitchPage
10:07:49:ForwardFromSwitchPageHandler: Moving to page ARPStartPageSwitch
10:07:49:Enter Microsoft.VirtualManager.Setup.StartPage
10:07:49:Exit Microsoft.VirtualManager.Setup.StartPage
10:07:49:Enter Microsoft.VirtualManager.Setup.AddRemovePage
10:07:51:Exit Microsoft.VirtualManager.Setup.AddRemovePage
10:07:51:ForwardToPageBasedOnPropertyValueHandler: Property bag entry for AddRemoveMode is 2. This means that we will move to a next page id ARPAddRemoveComponentsPage.
10:08:30:Enter Microsoft.VirtualManager.Setup.AddRemoveComponentsPage
10:08:39:RationalizeComponents: We are doing a full uninstall of all components that are currently installed.
10:08:39:Exit Microsoft.VirtualManager.Setup.AddRemoveComponentsPage
10:08:39:ForwardFromAddRemoveComponentsPageHandler: Move to Remove Database Page
10:08:39:Enter Microsoft.VirtualManager.Setup.RemoveDatabasePage
10:08:42:Uncaught Exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: "SqlMachineName" ist leer oder hat mehr als 255 Zeichen.
Geben Sie einen gültigen Wert ein, und wiederholen Sie den Vorgang.
10:08:42:StackTrace: bei Microsoft.VirtualManager.Setup.SqlMachineName.Validate(Object newInputValue)
bei Microsoft.VirtualManager.Setup.InputParameter.SetInputValue(Object inputValue)
bei Microsoft.VirtualManager.Setup.RemoveDatabasePage.ExitPage()
bei Microsoft.VirtualManager.SetupFramework.PageNavigation.NavigateToPage(Navigation navigation, String jumpPage, Boolean shouldValidate)
bei System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
bei System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
bei System.Windows.Controls.Button.OnClick()
bei System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
bei System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
bei System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
bei System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
bei System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
bei System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
bei System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
bei System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
bei System.Windows.Input.InputManager.ProcessStagingArea()
bei System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
bei System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
bei System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
bei System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
bei MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
bei MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
bei System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
bei MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
bei System.Windows.Threading.Dispatcher.LegacyInvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs)
bei MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
bei MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
bei System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
bei System.Windows.Application.RunInternal(Window window)
bei System.Windows.Application.Run()
bei Microsoft.VirtualManager.Setup.Program.Main()
10:08:42:Application Ended
10:08:42:Failed
10:08:42:Property Bag Values:
10:08:42:SetupStartTime = 31.07.2014 10:07:42
10:08:42:POSTINSTALL = 1
10:08:42:DefaultLogPath = C:\ProgramData\VMMLogs
10:08:42:DefaultLogName = C:\ProgramData\VMMLogs\SetupWizard.log
10:08:42:setupexepath = C:\Users\Administrator\AppData\Local\Temp\2\VME0CD.tmp\Setup
10:08:42:ArchitectureIs64Check = True
10:08:42:OperationSystemIs2k12OrLater = True
10:08:42:SetupUserAccount =
10:08:42:UserName = Windows-Benutzer
10:08:42:CompanyName =
10:08:42:ProductKey =
10:08:42:ProgramFiles = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\
10:08:42:IntegratedInstallSource =
10:08:42:CreateNewSqlDatabase = True
10:08:42:RetainSqlDatabase =
10:08:42:ForceHAVMMUninstall =
10:08:42:SqlServerPort = 0
10:08:42:SqlInstanceName =
10:08:42:SqlDatabaseName = VirtualManagerDB
10:08:42:RemoteDatabaseImpersonation = False
10:08:42:SqlMachineName = VW-SRV
10:08:42:SqlDBAdminName =
10:08:42:SqlDBAdminPassword =
10:08:42:SqlDBAdminDomain =
10:08:42:SqlDataFileLocation =
10:08:42:SqlLogFileLocation =
10:08:42:IndigoTcpPort = 8100
10:08:42:IndigoHTTPSPort = 8101
10:08:42:IndigoNETTCPPort = 8102
10:08:42:IndigoHTTPPort = 8103
10:08:42:WSManTcpPort = 5985
10:08:42:BitsTcpPort = 443
10:08:42:VmmServerName =
10:08:43:CreateNewLibraryShare = True
10:08:43:LibraryShareName = MSSCVMMLibrary
10:08:43:LibrarySharePath = C:\ProgramData\Virtual Machine Manager Library Files
10:08:43:LibraryShareDescription = VMM-Bibliotheksfreigabe
10:08:43:SQMOptIn = False
10:08:43:MUOptIn = False
10:08:43:VmmServiceLocalAccount = True
10:08:43:VmmServiceDomain =
10:08:43:VmmServiceUserName =
10:08:43:VmmServiceUserPassword =
10:08:43:TopContainerName =
10:08:43:HighlyAvailable = False
10:08:43:HighlyAvailable2ndNode = False
10:08:43:VMMStaticIPAddress =
10:08:43:Upgrade =
10:08:43:InstallationLocation = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager
10:08:43:LocationOfSetupFiles = E:\amd64\setup
10:08:43:SERVER-VERSION = 1
10:08:43:BackupSqlDatabase = True
10:08:43:ScreensLoaded = 1
10:08:43:uninstall = 1
10:08:43:AddRemoveMode = 1
10:08:43:SERVER = 1
10:08:43:Collection LISTOFCOMPONENTSSELECTEDFORINSTALLING (System.Collections.ArrayList):
10:08:44: [0] = SERVER
10:08:44:fulluninstall = 1
10:08:44:PangaeaServer = 1
10:08:44:ARPComponentsNextPage = 0
10:08:44:End of list Property Bag Values.
10:08:44:
2014-07-31T10:08:44.5140408+02:00 Always:
Trace Session Ended -
Passing LUN through Virtual HBAs on Server 2012 R2
i have two Hyper-V hosts running Server 2012 R2 connected to a Fibre Channel SAN with an EMC back end. I am at the point where I have configured the zoning and can see the LUNs on the Hyper-V nodes using virtual HBA initiators. However, I cannot
find any way to pass the LUNs through to the Virtual Machines running Server 208 R2. If I used the method of a shared SCSI controller I don't see the pint of the Virtual HBAs.
Needless to say, the Virtual OS does not see any LUNs at this point.
PC_DoctorFirst, you must be sure that your HBA vendor supports virtual fibre channel - not all vendors do.
Configuring vHBAs for VMs is just like configuring HBAs on the physical hosts - only twice as much work. You have to zone and mask for the individual VMs, just like you zone and mask for the physical hosts. Except the VMs have twice as many WWNs
as the hosts because they need it for live migration to work.
If you search TechNet you will find blogs and design guides that can assist in setting this up.
"I don't see the pint of the Virtual HBAs."
For the most part I agree with you. In a Microsoft environment, there are very few cases where vHBAs make sense (imo). Before Windows Server 2012 with Hyper-V customers asked for vHBAs because VMware had that as a method for sharing volumes between
a pair of nodes to enable failover clustering. Also, early on, there were performance benefits to be realized by going directly to physical storage rather than using virtual disks that resided on physical storage.
2012 changed all that. Yes, it introduced vHBA, but R2 also introduced shared VHDX. 2012 also significantly improved virtual disk performance to the point where the difference between physical and virtual is not noticeable in almost all
cases.
Shared VHDX is much, much easier to implement and manage than is vHBA. It requires a box to be checked to enable sharing. vHBA requires two sets of zones/masks for each VM compared to one set for a physical server.
Shared VHDX allows for complete hardware independence. In other words, because all storage is virtual, the VM can be moved to any other platform. vHBA locks you to a specific hardware configuration. You are tied to the storage array addressed
by the WWNs.
Bottom line for me is that learning to use vHBA is an interesting exercise (which I did perform), but I have yet to run across a situation where I would opt to use vHBA instead of shared VHDX.
. : | : . : | : . tim -
The connection to Virtual Machine Manager Server [..] was lost.
Hello, I'm asking for help.
I got this error with these logs:
The System Center Virtual Machine Manager service terminated unexpectedly. It has done 3 time(s).
Event id 7034
Have anyone had such problems?
Looking forward for help. Thank youPlease review the eventlog: Application and Services Logs > Microsoft > Virtual Machine Manager > Server
This should give you an insight why Virtual Machine Manager is crashing.
Alternately you can enable Debug logging for Virtual Machine Manager to get more information.
Please see: http://support.microsoft.com/kb/2913445/ -
I have been looking for a solution to this for some time now. I want the convenience of a virtual Windows environment that can run simultaneously with OS X Lion--something I have right now using Virtualbox. But at the same time, there are graphics and processor-intensive Windows applications (for me, games and engineering applications) that don't run well at all in a virtual machine. So, here is what I am looking for:
A dual boot (i.e. bootcamp) system running Windows 7 and OS X Lion in which the Windows 7 machine can EITHER be booted as a virtual machine while running OS X OR booted physically so as to utitlize all system resources. The real trick however, is that I I want the virtual machine and the physical machine to be the exact same system. Meaning, if I boot physically into Windows and change something... rename a file, run a program and create a file, etc... those changes will all appear in the virtual machine.
Now, what are my options? I have read about Virtualbox and VMWare Fusion's "Raw Disk access" function but I can't tell if that's what I'm looking for or not... I half-thought that they were talking about converting a physical OS into a virtual machine, but without the intention of booting the physical OS again...
Also, I'm open to any software, free or otherwise. Thanks!both VMWare Fusion & Parallels Desktop for Mac can use a bootcamp Windows installation as VM exactly like you want.
-
Unable to log into FaceTime it says "the server encountered an error processing registration please try again later. Apple ID is verified ok but could not login. Please help. Thanks
I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
Unable to install windows features on windows server 2012 core datacenter
If I attempt to install, remove, or get windows features via powershell in windows server 2012 core datacenter I get the following error:
PS C:\Users\BB> Invoke-Command -ComputerName CORE1 {Install-WindowsFeature Web-CertProvider}
The given key was not present in the dictionary.
+ CategoryInfo : NotSpecified: (:) [Install-WindowsFeature], KeyN
otFoundException
+ FullyQualifiedErrorId : System.Collections.Generic.KeyNotFoundException,
Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureCommand
+ PSComputerName : CORE1
I get the same error regardless of weather I use install-windowsfeature, remove-windowsfeature or get-windowsfeature. I've tried it on the server, and remotely.
I've also tried managing the computer remotely using another windows 2012 server using the server manager GUI. That causes the server manager to crash with the following error:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: servermanager.exe
Problem Signature 02: 6.2.9200.16384
Problem Signature 03: 50107b22
Problem Signature 04: mscorlib
Problem Signature 05: 4.0.30319.17929
Problem Signature 06: 4ffa57ca
Problem Signature 07: 210b
Problem Signature 08: c
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.2.9200.2.0.0.400.8
Locale ID: 1033
Additional Information 1: 7a77
Additional Information 2: 7a77983701ecc7870d72712ffa4c3c88
Additional Information 3: 0b4b
Additional Information 4: 0b4b0ba1592ebbc56adc05832bb92aa6
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=190175
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
The server is running all Microsoft updates. Rebooting doesn't help. I've checked the event logs and I don't see anything relevant.
Help!
Thanks
BradHi,
I would like to suggest you first run get-windowsfeature command on the core locally not remotely. And if it works, then try to remote run it.
Invoke-Command -ComputerName CORE1 {get-WindowsFeature }
Regards,
Yan Li
Cataleya Li
TechNet Community Support -
Updating Server 2012 R2 DataCenter Offline With WSUSOFFLINE
Hello!
I Am trying to update a system that is not connected to the Internet and I am not really sure which updates I need.
Server 2012 r2 datacenter roles:
1. DC
2. DHCP
3. DNS
So far... (will have VMware installed)
I will need to update every server on the system via wsus offline (also the client pc's)
is there a bundle of updates for the O.S. (Server 2012 itself) or can you direct me as to where can I download the updates please?
thn'x in advance
OmriHi Omri,
essentially you'll have to configure the main WSUS server to sync for whatever products you want to patch (i.e. Server 2012R2, Exchange 2013, etc), and select the update classifications (critical updates, service packs, etc), and then export/import those
to the disconnected WSUS.
It's not really practical to try and figure out exactly which updates are needed on which machines, using the approach above the clients can then determine, based on their own configuration, which updates are applicable.
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :) -
Windows Media Player on Windows Server 2012 R2 Datacenter Edition
I have a server with Windows Server 2012 R2 Datacenter edition installed. This server is being used as a terminal server and I needed to have Windows Media Player installed in order to use a certain feature of a program running on the terminal server. After
researching online I found that all I should need to do is install the Desktop Experience feature and Windows Media Player was included in that. After installing the Desktop Experience feature and restarting the server, I was not able to find Windows
Media Player anywhere. I tried the same process on another server running Windows Server 2012 R2 Datacenter with the same results.
I was curious as to if this was a Datacenter thing where it was specifically not included with Datacenter edition. I was not able to find any documentation stating that WMP was not included in Datacenter, and everything that I found stated that the feature
sets for Standard and Datacenter were the same, it was just the licensing for them was different.
Curious to see if it would get installed with Desktop Experience on Standard, I spun up a Windows Server 2012 R2 Standard VM and installed Desktop Experience and sure enough WMP was installed as well. I then upgraded the Standard VM to Datacenter with a
Datacenter product key and after a restart WMP was still present.
I have also tried this exact same process with Windows Server 2012 (non R2) Datacenter edition and WMP was installed as expected, so it appears that this is only a problem with R2.
My question is, I this "works as designed" and I was just not able to find the documentation to support it or is this a bug?
Update: After doing some more playing around I noticed that if I did a clean install of Windows Server 2012 R2 Datacenter and then installed the Desktop Experience feature and WMP does get installed. Then I remembered that on the servers that I was trying to
install WMP on and it wasn't working were upgraded from 2012 to 2012 R2. So I created a brand new VM and installed Server 2012 Datacenter (non R2), then upgraded to Server 2012 R2 Datacenter and installed Desktop Experience and sure enough, WMP did not
install. So now I really think it is a bug and it is related to the 2012 to 2012 R2 upgrade process.Hi Caleb CSG,
Thanks for your feedback.
I'll feedback a report to Microsoft, and I also recommend you can post this bug in Microsoft connect.
https://connect.microsoft.com/WindowsServer/feedback/CreateFeedbackForm.aspx?FeedbackFormConfigurationID=5352&FeedbackType=1
Best Regards,
Anna
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Server 2012 R2 Datacenter Preview Activation/Upgrade
Hello,
Is there a way to activate an installation of Server 2012 R2 Datacenter Preview? I have tried DISM, and Activating with my product key through Control Panel.
When I run the Get-TargetEditions command it says I am unable to upgrade to anything. I have Datacenter license.
Currently I mounted my 2012r2dc ISO and it said it was eligible to upgrade from it, and I am currently running that...I will udpate if it works!
Thanks,
RobIf anyone is looking to upgrade their Server 2012 R2 Datacenter Preview to a production server, it's actually very simple.
1.) have a license for datacenter
2.) have the disk, or ISO
3.) run the setup from windows > install > datacenter with GUI > upgrade
about 20 minutes and 4-5 reboots later, you're up in Server 2012 R2 Datacenter. Go to CP > System and Security > System > Activate Windows
Done. Full licensed production version. -
Can I download the trial version of windows server 2012 onto a laptop running windows 8.1 and create a dual boot?
Have a look:
http://blogs.technet.com/b/blainbar/archive/2012/09/25/step-by-step-4-ways-to-dual-boot-microsoft-windows-8-and-windows-server-2012-with-or-without-windows-7.aspx
http://www.msdonkey.com/server/dual-booting-windows-8-1-and-windows-server-2012-r2-from-vhd/
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing! -
hi,
I have a question about the price ,
windows 2012 is more cheaper than windows essential 2012, I don't understand why the windows 2012 is excl. licenties and essential has 25 free client licenties is that the reason.
thanks
johan
h.davidCheck the Link below to find relevant information regarding Editions and Pricing of Windows Server 2012 R2:
https://www.google.gr/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CFEQFjAB&url=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2F4%2FD%2FB%2F4DB352D1-C610-466A-9AAF-EEF4F4CFFF27%2FWS2012_Licensing-Pricing_FAQ.pdf&ei=fJa8UsP_FK6V7AaywYGgDQ&usg=AFQjCNEtmNeiIPtw0boIAju2kH4iqOAxvw&bvm=bv.58187178,d.ZGU
Exempt Windows Server 2012 R2 Datacenter Edition, Pricing is the Same with Windows Server 2012 Products.
It will answer your question.
Maybe you are looking for
-
Report for released orders from credit block
Dear Friends, Can you tell me any report which can give us the list of released sales orders from credit block with user ID (who released) and date (when released). If no standard report is availble then please give me the table where this data gets
-
Export with all objects and only some table data
Hi, can we use exclude and include both at a time.Because I want export full schema but data required only some 5 table, Is it possible. please share expdp and impdp query. Regs, Brijesh
-
Hi! I am looking for an api that handles file upload though jsp/servlet. I'm currently using the JspSmart smartUpload component but they looks like they have stop develop it so I'm am looking for an alternative. Thanks in advance Roland Carlsson
-
How do I get a Gaelic UI in OS 10.6?
I want to change the interface language to irish gaelic, but nothing changes when I put Gaeilge in System Preferences, nothing changes.
-
Question of file size related to power point
I am a relatively new user to Premier Pro and currently have simple editing needs. I am creating a powerpoint presentation in 2010 with multiple video clips (no audio). The file size (powerpooint) has become too large (@ 300MB). I plan to use a pr