Log-on client 200 is not the same as BI clients "600"

Hi Experts,
My data load got failed and when i checked the error message, it says " Log-on client 200 is not the same as BI clients "600"".
Diagnosis
You are using client-dependent BI functions in client 200. However, the standard BI client is 600.
System Response
The function is terminated.
Procedure
Maintain a destination in the BI standard client. For information, see SAP Note 522569.
I went through the sap note and checked the maintenance of rfc desination. But not able to uderstand this issue. Do anyone have good idea about this issue.
Thanks in advance.
Anand

Hi,
In BW, you must work on only client. As the error said, you log on to client 200, but using 600 client as the connected one. Please check the source system conncection whether it is given for the default client in RSADMINA table BWMANDT field or not. if not change that.

Similar Messages

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Safari logs me out of logged in web pages - not the same problem as other similar post - please read.

Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
Here is my machine info.
iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
Safari Version 5.1.7
I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
Any help or advice is apprecaited.

BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
The time it happened was sometime between 14:30 and 14:35
I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero

Getting Client IP, but not the LAN IP

Hi,
Is there a way to get the external IP of the forms user? I am aware of the functionality of Webutil,but that will only get the local IP from the users LAN, and not the IP the application server are seeing. What I want is to map the IP's in the Apache logs to forms sessions.
/Vidar

Vidar,
can you elaborate a bit more on this. How does it come that the IP address of the client is not the same as the one the server sees. The onyl explanation to this i can see is that you have a proxy between teh client and the server. The Forms WebUtil function gets the client IP as you would get by issuing a ping.
Frank

HT5312 how do i reset my admin password, my apple iD password is NOT the same as my admin login password

all ive been seeing is that i can reset my password with my apple iD, but its not the same. and it doesnt do the command R thing or the terminal/utilities thing. so what do i do??

Phil,
First of all, to log in as the HTML DB administrator, you want to use a different page, one that ends in /pls/htmldb/htmldb_admin Try logging in there. If that doesn't work, see this thread about creating a new admin account:
stupid password tricks
Sergio

Why are my iCal events not the same across views?

Help! I've been editing my iCal in Month view and everything looks great... but then I look at the day view (or week, whatever) and it's not the same. For example, in Month view for July 2 - I have one event scheduled from 8:30-noon. Then I look at the day view... and there are 8 different events! Most of them duplicates of different things that I had at one time or another deleted or changed. Why didn't the "clean up" work that I did in the month view carry over to day or week view? In fact the opposite, there are more things in day or week views than I ever created.
Recently upgraded to Lion from Snow Leopard. Recently changed from mobileme to iCloud. I only have iCal set to my iCloud account (no "on my mac" iCal calendar data). So the problem I see when editing on my MacBookPro is also seen when logged into iCloud directly via Safari and on my iPhone, iPad, etc. At first I thought this was an iCloud syncing error because I only noticed the difference on my phone (list view)... but when I went back to my MacBookPro I realized the problem exists there too... so doesn't seem to be a syncing error, but rather a "view" error... then the "problem" is mirrored everywhere.
I've tried "refresh" and "refresh all" from the Calendar drop down menu. This does nothing to help the problem... not that I really expected it would.
Thanks for any help you can provide. I'm going crazy!
Mac OS X 10.7.4; iCal 5.0.3

Fixed my own problem. Ultamately a user error but tied to the many threads about the month view defaulting events to "all day" vs. hourly increment. I knew that was the case, so when editing events from month view I made sure to add/change the time, but negected to look at "To" date. If my event was for an hour, simply adding the hour pushed the day to span across dates so the event was really 25 hours. Looked OK in the month view (just showed as a dot) but the day and week were all filled and casued the event to appear twice on the second day in list view (iPhone). In the case of repeat events, sometimes "To" date ended up as the end date for the repeat cycle... which really messed every thing up... I believe causing what looked like duplicates, etc.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

GetClientID not the same with request map in a dataTable

Hi,
I have a dataTable with multiple rows of same input text box (which has a required="true" validation attribute), the generated id in request map is something like (because it's repeating in a dataTable)
formname:_id0:0:firstname
formname:_id0:0:lastname
but the .getClientId() method of UIComponet is NOT the same! When I try to getClientID, for the same componet (recusively gong the tree), I get
formname:_id0:firsntame
formname:_id0:lastname
how do I retreive the correct id? or why is it not getting the right client ID?
The reason I'm manually going through the tree is because I need to do some custom logic of checking each componet in the page, see if it's required, if it is, I'm going to do add custom required messge for them (all this is implemented in a phaseListener)
thanks.

Hi,
thanks for replying.
Basically, I have need to customize error message for validation, so I adopted the code here by implmenting a phaseListener.
http://www.jroller.com/comments/ksevindik/Weblog/customizing_jsf_required_field_messages
which in turn derived from
http://www.oracle.com/technology/pub/articles/masterj2ee/j2ee_wk7.html
If take a look at the code above, in the validateValue() method, it's checking for component .submittedValue properties. This normally works for forms by itself.... but when the form field are repeated inside a dataTable, the
inputComponent.getSubmittedValue() becomes null.
I was confused, so I tried to output the clientID of the inputComponent by
inputComponent.getClientID(),
Only then, i noticed that the ID is not the same as the ID in requestMap, mabye that's why inputComponent.getSubmittedValue() is null.
Let me rephrase the question, how do I access the text box value in any row of a dataTable? (Note, the value has NOT been updated into the model yet because I'm trying to get the value in validation phase)
Thanks again. REALLY appreicate it.

Hierarchies are not the same as in R/3

Hi experts !
My Hierarchies in BW we are not the same as the source hierarchy in R/3.
They are not time-dependant, and the upload is scheduled every night, and gives no error messages.
Is there any known issues here?
I'm in the 7.0 version, but the upload for the hierarchy is in the old version.
The source hierarchy for account is using intervalls. Is that a problem ?
Thankfull for good advise !
Is there a possibility that the production bw is loading from the wrong client.. ?
That the RFC connection secretly gets the Hierarchies from elsewhere...
Message was edited by: Ingrid
Ingrid Husby

I had not found the button for choosing the last hierarcy in the infopackage..

RFC Error:The BW IDoc type ZSBA011 is not the same as the source system

Hi Experts,
RSA1Source System (Context Menu) Check
I am getting the below error
<b>The BW IDoc type ZSBA011 is not the same as the source system IDoc type ZSBD012               </b>
What might happened wrong.When i checked with my Basis Consultant who is new to job,Replied every this is ok with regeards to RFC.
Where should i check to correct the error
Thanks

Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102      System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470      Activities after client copy in BW source systems
325525      Copying and renaming systems in a BW environment
184754      Procedure after BW database copy
184447      Building a BW-system landscape
184971      Notes on BW source system connections
140276      Error in source system assignment
524554      Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken
Message was edited by:
        Patrick Rieken - BI-Formance B.V.

Data Guard: standby archivelog files not the same as the primary archivelog

From reading the Data Guard doco, one gets the impression that that the standby redo archive logs are just a mirror of those from the primary, that the shipped and applied archived redo logs from the primary are what end up in the standby archive directories.
However I have noted that the files are not the same (md5sum is different), which is concerning as using Oracle's archive log naming recommendation, the files have identical names.
Does this mean that the Standbys redologs can not be used as a source of redo logs if one had to restore using a backup of the primary database?
i.e. Can you recover using an RMAN backup of the primary, and redo logs from the standby?

Hi MSK, I agree, that's exactly what I thought. I'm confused though why the logs do not match. Perhaps it is just metadata in the log that has changed, not redo data.
Anyone have any knowledge on why the archivelogs are different on the standby to those on the primary?

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

I can sign into my firefox on browser, but in the community page it shows incorrect password ? is it not the same ?

So, i have a browser account and sync used to work, but not anymore. Also in the support site it shows wrong password. is it not the same account ? Should i need more than one account for the product and the support site ?
Although it shows that bot am logged in my pc and andriod, my accounts are not in sync.

No, Sync aka Firefox Accounts uses a separate "username" and password. In fact, all Mozilla sub-domains have a separate registration and login setup. Some of us just use the same username / email address and password for all the sub-domains for making it easier to remember, but that still doesn't allow us to log in once for all the sub-domains.
How long has it been since you were last able to log in to Sync?
Firefox 28 and early versions used a different version of Sync, and Firefox 29 made it necessary to "update" each users Sync account to the new Firefox Account.
See this KB article - [[How to update to the new Firefox Sync]]

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

With iTunes match, order of the songs in my playlist of mobile devices is not the same as on my computer

In my iTunes on computer, I have several smart play lists. Within each playlist, songs are set to a certain order. Some playlist songs order are organized by name, some playlists are organized by Album, some playlists are organized by artist etc.
When I was syncing my iPhone and iPad directly with my computer, the playlists on my mobile device had same order of songs as on my itunes in computer.
Now, I signed up for iTunes match. With iCloud sync, order of the songs in my playlist of mobile devices is not the same as on my computer. In fact, order of songs within a playlist appears to be completely random. Moreover, order of songs are different in my iPhone 4s and iPad 2
How can I change the order of songs on my mobile devices or how do I make iTunes match to sync my songs such that within a playlist, my songs are in the same order as that of iTunes on my computer.

Thanks mracole. I assume this means order of songs will work with regular play lists I iTunes match. Will try it this afternoon and report.
Please let me know if my understanding is not correct.
Best regards and thanks once again.

Log-on client 200 is not the same as BI clients "600"

Similar Messages

Maybe you are looking for