Log shows attempt to access my computer
I have my Leopard firewalls enabled and the do not acknowledge checked also. When I check my security logs, I notice 50 to 60 attempts to connect while in stealth mode. These are usually from three or four Ip address and randomly try make contact with random ports on my computer. Am I safe? What is going On? My Comcast provider does not respond to my bringing it to there attention. I fear it might slow my connection as my cable modem is in constant activity. I fear its looking for a hole but I have no ideas what is going on. When I try a trace IP lookup I usually do not get any info back. Once I got an amsterdam address. Any explanations would be appreciated.
there are [random port scans|http://en.wikipedia.org/wiki/Portscanning] all the time on the internet. they affect absolutely everybody. you are not unique at all. some are malicious attempts but they are not targeted at you specifically. there is nothing you need to do beyond standard security measures which you seem to have done already.
Similar Messages
-
Postgresql error: Log show can't access postgresql.conf
Hello,
In the Console, I have this looping error:
18/07/12 3:57:23.534 AM org.postgresql.postgres: postgres_real cannot access the server configuration file "/var/pgsql/postgresql.conf": No such file or directory
18/07/12 3:57:23.536 AM com.apple.launchd: (org.postgresql.postgres[9841]) Exited with code: 2
18/07/12 3:57:23.536 AM com.apple.launchd: (org.postgresql.postgres) Throttling respawn: Will start in 10 seconds
Spec: MBP 7,1, 2.4gHz Intel Core 2 Duo, 4GB DDR3 Ram, 500GB hard drive with Lion Server 10.7.4
Advice?
Thanks,
TonyI'm having the same problem here.
Last night my laptop shut down due to lack of power It dualboots Win7 and Arch, neither of which run:
Here's the error I'm getting:
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
ERROR: Root device mounted successfully, but /sbin/init does not exist.
Bailing out, you are on your own. Good luck.
/bin/sh: can't access tty; job control turned off
[ramfs /]#
Booting into Win7 yields:
BOOTMGR is missing
I've booted up a KNOPPIX Livecd and the filesystem appears ok. Can I just try and reinstall GRUB, as I'm assuming that's what the problem is?
Thanks in advance,
Jacques -
Username not showing up in access log for authenticated users
I'm using form-based authentication in a Java web application on Sun One Web Server v6.1 to restrict access to authenticated users. However, even after the users authenticate and access the application, the username field in the access log is showing them as anonymous.
request.getRemoteUser() is reporting the correct username, so it just seems to be the access log that is in error. Right now it is set to the default but changing formats to custom doesn't seem to help in displaying the username.
Here's an excerpt from the access log:
// anonymous access attempt, redirects to login page...
10.100.168.110 - - [01/May/2006:14:34:42 -0400] "GET /profile/index.jsp HTTP/1.1" 302 0
10.100.168.110 - - [01/May/2006:14:34:42 -0400] "GET /profile/login.jsp HTTP/1.1" 200 3355
10.100.168.110 - - [01/May/2006:14:34:47 -0400] "POST /profile/j_security_check HTTP/1.1" 302 0
// at this point they are logged in and their username should be reflected in the access log, but is not:
10.100.168.110 - - [01/May/2006:14:34:47 -0400] "GET /profile/index.jsp HTTP/1.1" 200 3532 And the relevant code from the web application's web.xml:
<security-constraint>
<web-resource-collection>
<web-resource-name>AllFiles</web-resource-name>
<description>
Restricts anonymous access.
</description>
<url-pattern>/*</url-pattern>
<http-method>POST</http-method>
<http-method>GET</http-method>
</web-resource-collection>
<auth-constraint>
<description>
Authenticated Users
</description>
<role-name>user</role-name>
</auth-constraint>
</security-constraint>I've searched the forums and the manuals but can't see anything showing that the access log's username field doesn't work with form-based authentication. Can anyone shed some light on this?Some background:
The Java Servlet container has its own authentication infrastructure (which is what you configure in web.xml) which is separate from the non-Java authentication infrastructure (ACLs, etc.). If you set up authentication via ACLs the resulting user identity can (though you may configure it not to) propagate to the Java Servlet container such that request.getRemoteUser() will return it, even though no web.xml-driven authentication occurred. The coverse is not true, however: if you authenticate via a Java Realm, based on web.xml configuration, that user identity is not available to non-Java code.
(Your web.xml snippet doesn't show you using FORM auth - but it doesn't matter, the explanation above applies in any case.)
That is why the log file (generated from non-Java code) doesn't have access to that user. It probably should, but there's no config option today for you to make that happen.
If you're using BASIC auth you may consider moving the authentication configuration from web.xml to ACLs as a possible workaround. It will then show up in the access logs.
If you prefer web.xml-based authentication, consider the <SECURITY audit="true"> option in server.xml. It won't be in the access log but you'll have an audit trail of authentications, which may help. -
I get a prompt "the computer 192.168.1.70 is attempting to access nmbd on your computer"
I get a prompt "the computer 192.168.1.70 is attempting to access nmbd on your computer". This has happened before, different ip address, am I being hacked?
This is about SSDP (Simple Service Discovery Protocol) that is part of the 'Send Video To Device' service.
*http://en.wikipedia.org/wiki/Simple_Service_Discovery_Protocol
See also:
*[https://bugzilla.mozilla.org/show_bug.cgi?id=1111967 bug 1111967] - Add an option to disable SSDP in Firefox
<i>Please do not comment in bug reports<br>https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i> -
Hi my iMac hangs when browsing and letters typed from my key board take ages to show and the ability to scroll in safari is difficult almost non existent. However when I log in as a Guest my computer acts fine. I have cleaned caches verified disk etc to no avail.
LesHi my iMac hangs when browsing and letters typed from my key board take ages to show and the ability to scroll in safari is difficult almost non existent. However when I log in as a Guest my computer acts fine. I have cleaned caches verified disk etc to no avail.
Les -
I am attempting to access App store to but Pages, but cannot log in "Unknown error'. However, a friend can gain access using my username and password on his Mac.
This could be a number of things. Lets try in a new User Account first.
OS X Mountain Lion: Create a new user account
http://support.apple.com/kb/PH11468
Mac OS X 10.6: Creating a new user account
http://support.apple.com/kb/PH6651 -
A device which is not part of this management group has attempted to access this Health Service.
Has anyone found an answer to this yet? I have uninstalled/reinstalled the agents both manually and through the push. Rebooted the client, rebooted the sce server. Forced the group policy to reapply, forced the health agent to /reportnow and I still get the error. The client shows up under the agent managed section but under the health state column it shows not monitored. The clients can ping the SCE server by FQDN and RDP to it as well so name resolution is working fine.
On the the SCE server I get this in the log
Event Type: Information
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20000
Date: 6/25/2009
Time: 10:09:40 AM
User: N/A
Computer: *******
Description:
A device which is not part of this management group has attempted to access this Health Service.
Requesting Device Name : *****
And this
Event Type: Information
Event Source: OpsMgr Connector
Event Category: None
Event ID: 21042
Date: 6/25/2009
Time: 10:25:14 AM
User: N/A
Computer: ***********
Description:
Operations Manager has discarded 1 items in management group Servername_MG, which came from $$ROOT$$. These items have been discarded because no valid route exists at this time. This can happen when new devices are added to the topology but the complete topology has not been distributed yet. The discarded items will be regenerated.
On the client I get
Event Type: Error
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20070
Date: 06/25/2009
Time: 10:06:13 AM
User: N/A
Computer: ******
Description:
The OpsMgr Connector connected to ****** but the connection was closed immediately after authentication occured. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
And this as well
Event Type: Error
Event Source: OpsMgr Connector
Event Category: None
Event ID: 21016
Date: 06/25/2009
Time: 10:06:18 AM
User: N/A
Computer: ******
Description:
OpsMgr was unable to set up a communications channel to **** and there are no failover hosts. Communication will resume when ******* is both available and allows communication from this computer.
And this
OpsMgr has no configuration for management group Servername_MG and is requesting new configuration from the Configuration Service.Hey Nathan,
Yea I have sent the script to eveyone that has aked for it. I dont know if its helped anybody else as none has given me any feedback either way.
I guess I can post it here for everyone to use.
Please keep in mind that if you use this script from MS its at your own risk, If your DB blows up, massive catastrophic failure ensues and so forth ITS YOUR OWN FAULT. MAKE SURE YOU HAVE GOOD BACKUPS
Step 1) Run this against your SCE 2007 DB
DECLARE @BaseManagedEntityInternalId int
DECLARE @BaseManagedEntityId uniqueidentifier
DECLARE @ViewName sysname
DECLARE @Statement nvarchar(max)
SET @BaseManagedEntityInternalId = 0
WHILE EXISTS (SELECT * FROM BaseManagedEntity WHERE (BaseManagedEntityInternalId >
@BaseManagedEntityInternalId))
BEGIN
SELECT TOP 1
@BaseManagedEntityInternalId = bme.BaseManagedEntityInternalId
,@BaseManagedEntityId = bme.BaseManagedEntityId
,@ViewName = met.ManagedTypeViewName
FROM BaseManagedEntity bme
JOIN ManagedType met ON (bme.BaseManagedTypeId = met.ManagedTypeId)
WHERE (bme.BaseManagedEntityInternalId > @BaseManagedEntityInternalId)
AND (bme.IsDeleted = 0)
ORDER BY BaseManagedEntityInternalId
SELECT @Statement = 'IF NOT EXISTS (SELECT * FROM ' + QUOTENAME(@ViewName) + '
WHERE BaseManagedEntityId = ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ''')
PRINT ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ' ' + @ViewName + ''''
EXECUTE(@Statement)
END
STEP 2)
If your problem was the same a mine you should get some GUID’s returned. (For example 93790c0B-09C4-3A4D-CE72-F4E3Dd917D78 MTV_DeploymentSettings)
Using the GUID that we got in the output file
Execute the below given query:
==========================
select fullname
from basemanagedentity
where basemanagedentityid = ‘<GUID>’
==========================
Verify that the device or the object mentioned in the above output is not displayed in Operations console.
Only in case if the object is not displayed then use the below given query to delete it from database.
==========================
update basemanagedentity
set isdeleted = 1
where basemanagedentityid = ‘<GUID>’
==========================
Before executing the above query please ensure that you have the backup of the database. Also note that you need to run the above said query only incase if you do not see the object in the Operations console.
After executing this query, run this stored procedure:
==========================
exec p_Detectandfixinstancespaceinconsistencies
==========================
Once it is done:
> Stop all the three OpsMgr services: health, Config and SDK on Management Server
> Cleared the health service state folder.
> Start all the three OpsMgr services: SDK, Config, and health on Management Server.
> Wait for 30 minutes and see if the agents start getting monitored.
I hope this helps everyone -
Hi,
Does anybody have any experience of using iTunes with a web filtering proxy? My home is using the Sophos UTM home edition to provide edge antivirus and content filtering. More information available here: http://www.sophos.com/en-us/products/free-tools/sophos-utm-home-edition.aspx
The proxy settings for the computer is set to use an automatic configuration script "WPAD" and the settings are locked by group policy and cannot be disabled or changed.
Now here's the problem, when launching iTunes, the iTunes prompts me to enter login details for the HTTPS proxy. That's all well and good, so I enter the login details and hit okay. But when I go to the store tab, iTunes crashes with javascriptcore.dll. This makes sense because a WPAD proxy configuration file is pretty much JavaScript code. But this should not happen, as now I cannot access the iTunes store.
Prior to iTunes 12.1, iTunes would sometimes freeze when attempting to access the store but it would eventually work.
The proxy logs are not showing that any iTunes requests were blocked, dropped or otherwise rejected.
Does anybody have any suggestions to get this to work again or at least work around the issue?
NOTE: Disabling the proxy is not an option because the proxy settings on the Windows computers are locked through group policy. I can however, edit the WPAD proxy configuration file and add exceptions to the proxy but I don't know where to start!
I will also post this on the Sophos UTM support forums.
Thanks in advance.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
What does a pop up I want to access your computer mean
I was watching a you tube video and I received a pop up that said I want to access your computer accept or deny. I hit deny a bunch of times and it wouldnt go away. I hit accept now I wonder if I gave someone access to my computer? I have norton for mac and ran a scan shows nothing. I am also on a wifi network thats locked through Verizon.
You would have seen evidence of any remotely managed activity on your screen, such as cursor moving, folders being selected, etc. It does not seem that anyone has actually been able to access your Mac. But as a precaution I suggest you change your passwords - log in password, mail, etc. That is the first step whenever you suspect any kind of intrusion.
By the way, Norton for Mac is not going to protect you from anything. -
I am getting an error message on all devices when attempting to access mail.
Although I have made no changes to an account I have used for over 5 years now, I suddenly am getting error messages on my iPhone, my wife's iPhone, my iPad, and my laptop when attempting to download mail from my account. The messages are all server or password related. I logged into iCloud.com and while everything else is functioning correctly, attempting to access mail yielded an error message as well (with the option of reporting the error to Apple). Obviously this is a server issue, but I don't see any other postings online, so am uncertain how wide-spread the problem is. I need recommendations regarding the most efficient way of reporting this problem to Apple in order to access my email as soon as possible!!
I have put myself in the express lane for assistance later today, but don't know how helpful that route will be! My devices show that the last time mail could be accessed was yesterday at 8:20 PM.
Thanks for any help you can provide!Same issue here in WI and for me it was at 6:36p CST.
I'm changed my password, removed iCloud from my phone ... tried 3G and WIFI with no luck. I also cannot check it on my Mac or iPad. I was able to get contacts and calenders back on my phone but no mail yet.
Did the whole Apple support thing and apparently I'm part of the 1%
EDIT: Question: are all of you former MobileMe users as well? Just wondering because I know there were going to be some changes as they completely move MobileMe over to iCloud and drop the "extra" services. I just can't remember if it was just a single cut off date or a series of dates. THAT email is stuck in my iCloud folders. -
Event ID 4 while attempting to access Mobile Devices list in ECP/OWA
Hi Community!
We just recently setup an Exchange 2013 (CU6) environment migrating away from Exchange 2010. Our 2013 environment has 1 Mailbox server and 1 Client Access Server. Everything appears to be functioning correctly between 2010 & 2013, except
when attempting to access the Mobile Device list from a user account within Exchange Admin Center in 2013. We receive an error 400 Outlook Web App Options and Event ID 4 on the Mailbox Server.
Thank you to anyone who can shed some light on this issue.
Log Name: Application
Source: MSExchange Control Panel
Date: 11/18/2014 9:35:22 AM
Event ID: 4
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: MBX SERVER NAME
Description:
Current user: '<user account>'
Request for URL 'https://MBX_SERVER_FQDN:444/ecp/Troubleshooting/ViewMobileDevice.aspx?pwmcid=3&ReturnObjectType=2&id=c61656ad-4b38-40f8-a56b-34a39faf84e9(https://CAS_SERVER_FQDN/ecp/Troubleshooting/ViewMobileDevice.aspx?pwmcid=3&ReturnObjectType=2&id=c61656ad-4b38-40f8-a56b-34a39faf84e9)'
failed with the following error:
System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.CannotAccessOptionsWithBEParamOrCookieException: There was a problem opening Options in Outlook
Web App. Please click Sign out below, then sign in to Options in Outlook Web App again. If that doesn't work, sign out, delete browser cookies, and sign in again.
at Microsoft.Exchange.Management.ControlPanel.HttpContextExtensions.ThrowIfViewOptionsWithBEParam(HttpContext context, FeatureSet featureSet)
at Microsoft.Exchange.Management.ControlPanel.EcpContentPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.CannotAccessOptionsWithBEParamOrCookieException: There was a problem opening Options in Outlook Web App. Please click Sign out below, then sign in to Options in Outlook Web App again. If that doesn't work, sign out,
delete browser cookies, and sign in again.
at Microsoft.Exchange.Management.ControlPanel.HttpContextExtensions.ThrowIfViewOptionsWithBEParam(HttpContext context, FeatureSet featureSet)
at Microsoft.Exchange.Management.ControlPanel.EcpContentPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at Microsoft.Exchange.Management.ControlPanel.HttpContextExtensions.ThrowIfViewOptionsWithBEParam(HttpContext context, FeatureSet featureSet)
at Microsoft.Exchange.Management.ControlPanel.EcpContentPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance, False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration, True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove,
True],[Eac.CmdletLogging, True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch, False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled, False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing,
False],[Eac.ModernGroups, False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions, False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices, False],], Flights:[],
Constraints:[[LOC, EN-US],[MACHINE, <MBX SERVER NAME>],[MODE, ENTERPRISE],[PROCESS, W3WP],[USER, <USERNAME>@],], IsGlobalSnapshot: False
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Control Panel" />
<EventID Qualifiers="49152">4</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-11-18T17:35:22.000000000Z" />
<EventRecordID>118746</EventRecordID>
<Channel>Application</Channel>
<Computer>MBX SERVER NAME</Computer>
<Security />
</System>
<EventData>
<Data>pacific-logistics.com/PLC Business Technology/Ryan Heyman</Data>
<Data>https://MBX_SERVER_NAME:444/ecp/Troubleshooting/ViewMobileDevice.aspx?pwmcid=3&ReturnObjectType=2&id=c61656ad-4b38-40f8-a56b-34a39faf84e9(https://CAS_SERVER_NAME/ecp/Troubleshooting/ViewMobileDevice.aspx?pwmcid=3&ReturnObjectType=2&id=c61656ad-4b38-40f8-a56b-34a39faf84e9)</Data>
<Data>System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.CannotAccessOptionsWithBEParamOrCookieException: There was
a problem opening Options in Outlook Web App. Please click Sign out below, then sign in to Options in Outlook Web App again. If that doesn't work, sign out, delete browser cookies, and sign in again.
at Microsoft.Exchange.Management.ControlPanel.HttpContextExtensions.ThrowIfViewOptionsWithBEParam(HttpContext context, FeatureSet featureSet)
at Microsoft.Exchange.Management.ControlPanel.EcpContentPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.CannotAccessOptionsWithBEParamOrCookieException: There was a problem opening Options in Outlook Web App. Please click Sign out below, then sign in to Options in Outlook Web App again. If that doesn't work, sign out,
delete browser cookies, and sign in again.
at Microsoft.Exchange.Management.ControlPanel.HttpContextExtensions.ThrowIfViewOptionsWithBEParam(HttpContext context, FeatureSet featureSet)
at Microsoft.Exchange.Management.ControlPanel.EcpContentPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at Microsoft.Exchange.Management.ControlPanel.HttpContextExtensions.ThrowIfViewOptionsWithBEParam(HttpContext context, FeatureSet featureSet)
at Microsoft.Exchange.Management.ControlPanel.EcpContentPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
</Data>
<Data>Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance, False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration, True],[Eac.AllowRemoteOnboardingMovesOnly,
False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging, True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch, False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups, False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions, False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy,
False],[Eac.UnlistedServices, False],], Flights:[], Constraints:[[LOC, EN-US],[MACHINE, <MBX SERVER NAME>],[MODE, ENTERPRISE],[PROCESS, W3WP],[USER, <USERNAME>@],], IsGlobalSnapshot: False</Data>
<Data>ActivityId: </Data>
</EventData>
</Event>Hi,
RBAC roles were not fully Installed during installation or it failed during PrepareAD
Please follow these steps to solve this issue.
Launch the Windows PowerShell
Run
Add-PSSnapin Microsoft.*
Run the command “Install-CannedRBACRoles” cmdlet to install the out-of-the-box RBAC roles.
Run the command “Install-CannedRBACRoleAssignments”
Best Regards. -
I operate an Amway Business and use the switch share duplicate APP. Initial log in was successful but now it reads " Log in failed ( GW900751 ). This is constant upon log in attempts. Is there a way to rectify this?
Hi Tracy,
I don't suspect Malware yet, Id guess Disk corruption or failing Hard Drive with Files not found.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
How can I remotely access my computer from a different location on Apple Remote Desktop?
I downloaded Apple Remote Desktop and am trying to access our computer at our church that is in the auditorium and work on slides for ProPresenter from my office which is on a different network. The Mac Pro, which is in the auditorium, is connected to a Netgear wireless router. I would also want to be able to have access to observe and control the screen on the Mac Pro whether I am in my office or at my house. I have tried everything from going to portforward.com, followed those instructions, did port forwarding, used ipchicken.com to get my external IP and made sure that the Mac Pro had a static internal IP address and made sure the computer had access for remote management. Any help to resolve this issue would be greatly appreciated! Works fine when it is on the same wireless network, but I need access being on a different wireless network. Thanks!
Hi austinmac14,
So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
Also these steps are so one person, can connect to one computer at your work.
Open Airport Utility:
go to the dock
Click on the finder
go to the menu bar
Click on the "Go" menu
Chose "Utilities" from the "Go" Menu
double Click on "AirPort Utility"
Access the Base Station:
Double Click on your Airport Extreme BaseStation that is your internet connection router.
a new window should pop up with your Airport Base Station as the Window Name
Configure Static Address for the computer you want to connect to via ARD:
Click on the internet Icon from the toolbar
Click on the "DHCP" tab
For "DHCP Reservations:" Click on the "+" button
For the "Description" put "ARD"
For "Reserve Address by:" set "DHCP Client ID"
Click the "Continue" button
For "DHCP Client ID:" set "ARD"
write down the number in "IPv4" address field
Click the "Done" Button
Configure routing to ARD computer:
Click on the "Advanced" icon from the tool bar.
Click on the "Port Mapping" tab
Click on the "+" button
for "Service:" Chose "Apple Remote Desktop"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Apple Events"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Login - SSH"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "Update" button.
wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
Configure the ARD computer to use the correct IP address:
Go to the computer you want to be able to remotely connect to
On that computer, Go to the menu bar
Chose the "Apple" menu bar
Chose "System Preferences…"
Click on the "Show All" button
Click on the "Network" icon
For the active network connection, (the connection on the left side with the green dot), click on it
Clock on the "Advanced…" button
Click on the "TCP/IP" tab
for the "DHCP Cient ID: field put "ARD".
Click the "OK" button
Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
Find out what your public internet IP address is.
On the computer you wish to connect to over the internet, gotohttp://whatismyipaddress.com/
when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
At this point you should be able to connect to the computer remotely
connect to the internet from another location.
open Apple Remote Desktop
go to the file menu
chose connect to computer using ip address
set the address to the address to the IP address you wrote down for step 6. 2.
use the same password as you used to connect to the computer at work using ARD.
So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
Also some network connections change. When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
Of corse there are ways around this. But that's kind of another conversation.
Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible. -
How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.
UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others. -
I have a requirement where I have to give the list of users who can access a specific computer define in AD.
I am new with PS.
Do you have a script to list users that can access a computer object of AD ?
I have executed the following script but it does not give me the access rights of who can access the computer 'computername'
How can i have this information. please help
Import-Module activedirectory
$computer=get-adcomputer "computername" -properties ntSecurityDescriptor
$omputer.ntsecurityDescriptor.Access | select-object -expandproperty IdentityReference | sort-object -uniqueI would say that, since the OP has so little info, there are no policies in use. It there were then this question would never be asked the way it is being asked.
I had a client call with a letter from their insurance company; an accountant with malpractice insurance. THey asked the same question inmuch the same way. "What computer can you users access?" The question should be more like
"Do you have a policy that restricts access to computers and do you audit for compliance?"
I have had other clients whose insurance asked the question in that way. It produces a better view of what should be happening and how to show compliance.
I recommend that companies being asked these questions by their legal departments or insurance companies should contract with a god computer security consultant to assist with answering these very tricky questions. Of course if it is just you boss's
curiosity then you may need to discuss his requirements with him in more depth.
¯\_(ツ)_/¯
Maybe you are looking for
-
I'm trying to download some purchased songs onto my laptop but it comes up with a message saying "There is a billing problem with the previous purchase." So I went in to make sure all of my payment information was there but my security code wasn't an
-
Booting Windows on Intel Mac from an external Firewire/USB hard disk?
Is it possible to boot an Intel iMac from an external hard disk - in target disk mode etc., without having to install Boot Camp? I have a spare drive with installed XP on it and I need to find out what is on the drive before re-formatting. However, I
-
I have been looking for a clear answer (with source code) to a problem commonly asked in the forums. The question is "how do I display a large comma delimited (CSV) file in a JTable without encountering a Java heap space error?" One solution is descr
-
How can I delete the duplicates, and leave only one exact copy of an item in my iTunes library?
Howw can I delete the exact duplicaztes in iTunes, and leave only one exact copy of an item?
-
I have searched for the following file and could only find one of them which I deleted. So far Safari does not seem to be effected. /Library/Application Support/Conduit /Library/InputManagers/CTLoader /Library/Receipts/ctloader.pkg /Library/Receipts/