Logging to Oracle
Hello,
I wanted to log on to Oracle server. Basically we have SAP XI and the database is Oracle. how can I log on to ORacle?
Thanx
"sysdba" is for system administration.
To logon to the used schema you'd use
sqlplus /@<SID>
This uses the same mechanism the ABAP uses too to connect to the database.
Markus
Similar Messages
-
User change password after first logging in Oracle 11g
Hi
Can you help someone in connection with this problem:
user can not change password after first logging in Oracle 11g
All the best
Ragip AvdijajSounds like they are not getting logged in at all, so they are never getting to the point where they can change the password, but we need to see more detail to give a better answer (an example or copy-paste of a sqlplus session might help)
-
Logging into Oracle Apps R12 throws error - unable to authenticate session
Hi All,
Working on R12 OS:AIX
Logging into Oracle Apps R12 throws error - "unable to authenticate session".
Earlier Guest user was end-dated which has now been removed and autoconfig was run.but still the same issue..(services were bounced too)
Guest user password is:ORACLE(uppercase) in xml file,dbc file,GUEST profile options..
could anyone please share such an experience encountered before and suggest resolution...
Would appreciate an early response!
Thanks for your time!
Regards,Pl see ML Note 342332.1 on steps needed to troubleshooot login. Although this doc is for 11i, it should also apply to R12
Srini Chavali -
Performance log for ORACLE 10g
Hi everyone can anybody tell me where i can get the reporting from the performance logs in oracle 10g>?
i need to generate reports for audit trail, no of hits in the portal , top ten url , and how often the user view a page or portlet?
i thank you all in advance .....look forward for replies....thank youThaks for the reply...
but i cant go to the link =( may i ask u abt this , i read this link http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/MONITOR_DIAGNOSTICS_ANALYTICS_PORTAL.HTM#1
STATING : Oracle9iAS Portal Release 2 (9.0.4) provides some new, additional metric information. This release also collects some (pre-defined) metrics in the Oracle Enterprise Manager Central Console and creates historical reports, which can be published via Oracle Management Portlets on Portal pages
How to do the publishing? is there any references that will guide me from how to use the metrics to published in the portal pages? i requires all these ....PLEASE HELP -
I cannot log into oracle using the user scott
I installed oracle, but I did not go through the underlined step. I am not sure if I skipped or it was not there during the installation
The Database Configuration Assistant will provide installation summary
and list the accounts that are unlocked. It will ask you for password management. Sys
and System accounts would be already unlocked. Unlock HR and Scott accounts,
and for these two accounts also specify the same password that you had given before.
When I test logging into Oracle using the user Scott, it shuts down.
I am using windows 7, and I installed Oracle Database 10g Release 2 (10.2.0.1.0)
Enterprise/Standard Edition for Microsoft Windows (32-bit)
How can I log into oracle using the user Scott?Hi,
Welcome to the forum,
After installing Oracle 10g SCOTT user will be in locked, you should unlock it.
Login as sysdba using the below command
sqlplus sys as sysdba
password:<ur password>
after connecting as sysdba use the below command to unlock the SCOTT user
ALTER USER SCOTT ACCOUNT UNLOCK;
Now connect as scott you will bw able to connect.
hari -
Help, How to view the error log of oracle Job
Hi all,
I created a job in my database, which clears the archivelog. After the job is executed, it occurs error.Such as :
RMAN清理归档日志 1 问题 2010-3-19 下午03时11分00秒 GMT+08:00 PTDB 数据库实例 SYSTEM RMAN 脚本
How to view the error log of oracle Job?
Thank you.
Eric ZhouHello,
Besides some views (with the scheduler) that you can get on the link below:
http://download-west.oracle.com/docs/cd/B28359_01/server.111/b28310/scheduse002.htm#CHDGIDFD
You may use the LOG parameter with RMAN so as to generate a logfile on the server.
Also from EM DBConsole (starting with 10g) you may have the RMAN Backup Report.
Hope this help.
Best regards,
Jean-Valentin -
Error trying to log into Oracle Directory Manager
I am receiving an error message when I try to log into Oracle Directory Manager. This is the first time I am trying to log in, I am trying to login with the username cn=orcladmin, and with the password welcome, which is the default. I then receive the error message "Server is not up and running". I thought I started an OID instance with oidctl.
I am running on w2k.
I am using the default port 389, at least thats what I accepted while installing the infrastructre.
Any advise?From the main page for this forum (http://forums.adobe.com/community/creative_cloud) please see the announcement.
Creative Cloud is experiencing issues at this time. We are investigating and working to restore service as soon as possible. This post will be removed once the issue is solved. -
Error Logging in oracle 9i for failing sql statements
Hello All,
I am looking for a oracle utility which will allow me to log the oracle error message for all the queries filed on a schema. Will audit trail help me in doing this.
Actually I am working on a third party application. I am using their API's for the customization, in some places the API just return database error but not the error code. So I basically want to know what query was fired and failed.
Thanks,
SathishHello Franky,
I was able to use a trigger on "AFTER servererror ON DATABASE". This gave me the following error.
ORA-08177: can't serialize access for this transaction
Thanks for your help.
Pavan - Thanks for your suggestion also.
Sathish -
Error logging in ORACLE 8.0.5
Hi All,
Help please ...
I just want to log some info. into a table when an error occurs and commit only the logging into the table.How can i achive this in Version 8.0.5 (which does not supp. autonomous transactions).
Thanks in Adv.
Message was edited by:
[email protected]Hi,
You can have a look to AUDIT statement option: WHENEVER NOT SUCCESSFULL.
8.1.7 doc online is available here. I don't think you'll find any 8.0 doc anymore on *.Oracle.*
HTH, good luck,
Yoann. -
Messages in the OS logs of Oracle Solaris on SPARC (64-bit)
One of my Customer is getting following messages in the OS logs of the Oracle Solaris on SPARC (64-bit) machine.
Feb 2 01:07:33 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 03:07:43 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 03:07:43 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
Feb 2 05:07:52 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 05:07:52 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 07:08:08 ndc-m9k-2-r1 scsi: [ID! 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 07:08:08 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 09:08:25 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 09:08:25 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
There is a note # 833665.1 on this which states "The issue is caused by the Host Storage metrics collected by the agent" and also a Patch 8477122 has been created for this issue.
However, there is nothing mention in the Note # 833665.1 about the following one message.
Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
Can anyone please tell me
1. whats the significance of the "oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call" message in the OS log?
2. Does this message get stops on applying of patch # 8477122 ?
Thank you,
BhavinThere are a number of known issues with the 10g agent on Solaris and patches are available. I assume you are running the 10.2.0.5 agent since you reference patch 8477122. If this is a brand new agent installation i would start with applying the latest PSU update which contains many related fixes. If you are still getting the error after this, open an SR with Oracle Support with your specific error message.
-
Hello,
I am a new user for Oracle 11g. After the successful installation when I tried to Logging to SQL Plus Command Prompt with username and Password .Its throws the following set of errors
Error Message
Enter user-name: myOracle
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session ID: 0 Serial number: 0
I again tried to login through SYS as SYSDBA but its saying Log Files are full and show the following set of message
Error Message Through CMD
C:\Documents and Settings\Bhaskar Anand>sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 25 14:37:22 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> connect sys as sysdba
Enter password:
ERROR:
ORA-28056: Writing audit records to Windows Event Log failed
OSD-2266672: Message 2266672 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1502) The event log file is full.
ORA-28056: Writing audit records to Windows Event Log failed
OSD-2266672: Message 2266672 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1502) The event log file is full.
Do Help me with the situationrefer the link:-ORA-28056: while connect to the database
-
No clarity on location of archive logs in Oracle 11g database
I have this query which I am not able to resolve. There is one location of archive log mentioned as /oraarch/app/oracle/oradata/snlprod/archive_logs/ in the parameter log_archive_dest_1. But the archive logs are showing in another location /orabackup/rman/snlprod/archive_logs. I am wondering how the archive logs are showing in this location, /orabackup/rman/snlprod/archive_logs.
I guess there is only one way in which location can be given which is seen from Availability->Recovery Settings->Media Recovery.
I hope, my question is clear.
Please revert with the reply to my query.
RegardsMust be
show parameter db_recovery_file_dest
If you want archived redo log send to /oraarch/app/oracle/oradata/snlprod/archive_logs
then you must set log_archive_dest_1 ='LOCATION= /oraarch/app/oracle/oradata/snlprod/archive_logs'
log_archive_dest_1 is same before then it means your all archvied redo log file will create in this directory
Regards
Mahir M. Quluzade -
I have just installed Oracle 9i on my machine Mandrake 8.2, I get a succesfully message for installing and creating DB and Listner have started successfully during installation, Also i have only one DB in this machine, Then when i go to access in such DB by comande:
#su - oracle
#cd OraHOme1 ; cd bin
$> sqlplus / nolog
error message : comande not found
Am'i in the right path for execute "sqlplus / no log" comande
Please help me as i'm a beginer in oracle domaine
Thank you allIn Oracle 9i there are no default password for sys/system. You will force to define a password for these account while installing from Oracle Universal Installer. If you don't know the password, you can log in through Oracle 9i without password in SYS schema. To do this, log in to OS where database is installed using OS username (which belong to DBA group). Start sqlplus with " / as sysdba" option. Then you will log in as SYS schema and you can change password for sys/system.
Note: if you use win2k. Set properties of SQLPlus icon and then set target as "C:\oracle\ora9i\bin\sqlplusw.exe /nolog" (replace path name with your oracle path). Then start SQLPlus. This will start SQLPlus with no log in and the use " connect / as sysdba". -
Checkpoint not complete in alert log file Oracle 11gR2 RAC
Hi,
I found checkpoint not complete in alert log file, almost every 3 seconds .
In metalink i saw for this error, archive_lag_target=0, already this value was set to 0 in my database.
We have 7 redo log groups for each instance, each group is of two redo log files, each file size is 50m.
To avoid this error what i need to do..........
please help me..................When you "checkpoint not complete" messages in your alert log this normally means your online redo logs are defined too small to handle the load and you have filled and need to switch to a new online redo log before the checkpoint triggered by the previous log switch has been completed.
Increasing your online redo log size is normally the fix for this.
HTH -- Mark D Powell --
PS - The following Oracle support document may also apply:
Checkpoint Not Complete In Alert.log Due To Setting Of Archive_lag_target [ID 435780.1]
Edited by: Mark D Powell on Nov 7, 2011 8:29 AM -
How start XA log in Oracle Server 8.1.7
I'd like to activate Oracle Server XA log while using Oracle 8.1.7 oci
driver for
connecting to a 8.1.7 Server. The JDBC log is already active.
Oracle Documentation states that you must add in the openinfo string of
the TM
de following info: DbgFl=15LogDir=/...
Where can I put that info so weblogic instruct Server to log xa trans?
I've seen that jdriver config has an openinfo field and it does the job,
but I want to
get it with Oracle driver.
Thanks,
JosepHi Josep,
Could you write a small standalone program that can
activate XA log, and than post it here in the newsgroup?
We will try to come up with ideas how to turn it on for
WebLogic.
Regards,
Slava Imeshev
"Josep Blazquez" <[email protected]> wrote in message
news:[email protected]..
I'd like to activate Oracle Server XA log while using Oracle 8.1.7 oci
driver for
connecting to a 8.1.7 Server. The JDBC log is already active.
Oracle Documentation states that you must add in the openinfo string of
the TM
de following info: DbgFl=15LogDir=/...
Where can I put that info so weblogic instruct Server to log xa trans?
I've seen that jdriver config has an openinfo field and it does the job,
but I want to
get it with Oracle driver.
Thanks,
Josep -
[JPA] Logging in Oracle Application Server
Hi,
I have a problem that the logging of SQL statements is lost in an application deployed in OAS 10.1.3.1.
I have set the following property in persistence.xml:
<property name="toplink.logging.level" value="FINER"/>In Java SE and in the standalone OC4J, the SQL is printed in the console window. However, when deployed in the Oracle Application Server, the SQL statements are lost. They are not in the standard server's log file in $ORACLE_HOME/opmn/logs/ default_group~home~default_group~1.log where the rest of the log data can be found.
Can anybody tell me if there's anything special about JPA logging in OAS?
We currently use TopLink Essentials v2.0-b58g (RC8) but we have also tried with other versions and there's no SQL info in the log.
Best regards,
BisserThank you very much!
I tried that option too. Sadly, it didn't work.
Now I have the following in persistence.xml:
<property name="toplink.logging.level" value="FINEST"/>
<property name="toplink.logging.level.sql" value="FINEST"/>I re-deployed the application. I even restarted the server. But nope, nothing helped. TopLink Essentials doesn't print to the standard console log and I don't know if it prints anywhere at all (and if it does, where?).
Through the server's administration console, I can see the following in the "Logger configuration":
oracle.toplink.essentials.session.file:/u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/applications/asmPreview/asmModel.jar-ASM: FINEST
oracle.toplink.essentials.session.file:/u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/applications/asmPreview/asmModel.jar-ASM.sql: FINEST
.Previously, the latter was NULL, which meant that it was inheriting from its parent log. But now it's explicitly set to "FINEST" and yet it doesn't print anything.
I wish I could force it to print somehow. That would aid us a lot in the functional testing, when we see strange behavior.
Maybe you are looking for
-
Outlook 2011 for Mac: where are 'Suggested Contacts'?
Hello, I have a MacBook Air 1st Generation (A1237), with OS.X 10.6.8 (Snow Leopard). Have installed MS Office, including Outlook 2011 and everything works fine. However, I don't see the 'Suggested Contacts' folder in Outlook. Auto-complete works fine
-
HP Photosmart C6100: Complete stuck (Microsoft word + "Black only" window)
Whenever I tried printing documents from Microsoft word, a window of "Ink catridges empty" pops out (because my magneta colour has run out). However, when I clicked on "black only" button, the whole screen (even the microsoft word) freeze. I couldn't
-
BW Bex Browser in SAP GUI for JAVA 6.40 R2.2 for Linux Desktops
Hello, I am using SAP GUI for JAVA v 6.40 R2.2 on a Linux desktop. But during the installation it doesn't ask for BW Bex installation option (as in SAP GUI for Windows). Is it the case that BW Bex is not supported in Linux Environment? If it is then
-
I need to reinstall microsoft office but no longer have the key. Is there a way around this?
-
Hi Everyone I was searchinig for ram for MacBook Pro. I came accross this in the apple store online under ram - 15/17inch ram upgrade for macbook pro. 2Gb Ram