Logging Toolkit Configuration

Hi,
          I am trying to configure my connector logging to post debug messages to both WL logs and the console. The ADK documentation mentions adding appenders to the configuration file but does not show any examples.
          I did try adding a ConsoleAppnder as an appender-ref under the root category but I am still unable to see my log messages on the console. Although they do show up in the server log.
          Appreciate your insight and some XML snippet showing how to place an appender withint a category.
          Message was edited by gzr58l at Oct 28, 2004 4:00 PM

Similar Messages

Apache Sling Logging Writer Configuration

Hi,
I'm having an issue where my custom log writer configuration is not being picked up and used by CQ5 sometimes. I've created a custom error log writer based on the example provided at http://helpx.adobe.com/cq/kb/HowToRotateRequestAndAccessLog.html which I've installed on an author, replicated it to the publishers, and all seemed ok and working correctly. The settings are:
Log File: ../logs/error.log
Number of Log Files: 5
Log File Threshold: 200MB
After installing this, the error logs rotated at 200MB resulting in error.log.0, error.log.1 etc as expected.
However after rebuilds on the machines, this configuration was overwritten (as expected). So I've installed and replicated the package again, but now the configuration is not taking effect. I'm using the exact same config package as I was previously, but the logs don't seem to be rotating at all now (not even daily). I've deleted the config from the Felix console on all authors and publishers, reinstalled on the authors, replicated to the publishers, then restarted the CQ5 service on all machines, but it's still not working.
So I have a couple of questions about this:
Is there somewhere else in CQ5 that might be overriding these log writer config settings?
Is ../logs/error.log correct for the standard log file location? A note in step 3 of Creating Your Own Loggers and Writers on http://dev.day.com/docs/en/cq/current/deploying/configure_logging.html states:
Log writer paths are relative to the crx-quickstart/launchpad location.
Therefore, a log file specified as logs/thelog.log writes to crx-quickstart/launchpad/logs/thelog.log.
To write to the folder crx-quickstart/logs the path must be prefixed with ../ (as../logs/thelog.log).
So a log file specified as ../logs/thelog.log writes to crx-quickstart/logs/thelog.log.
     The configs in the log rotation example also use ../logs. However when looking at the default/standard logging writer config, it uses logs/error.log. Which one is correct?
Any help on what's going on here would be appreciated!!
Thanks,
K

Hi,
I am answering your last question and this one here only.
1. Log configuration can be override at project via creating config and overriding factory "org.apache.sling.commons.log.LogManager.factory.config-<identifier>" and writer (if required) "org.apache.sling.commons.log.LogManager.factory.writer-<identifier>". So plz check if you have configure log at project level. Now if you are not able to see then plz recheck you log configuration in felix console http://localhost:4502/system/console/slinglog here you can see entire log configuration for CQ system.
2. both will work but the location will change
     i. CQ 5.5 - log file located under "crx-quickstart" ../logs/<filename>.log will create under this
     ii. CQ 5.4 - logs creates under "crx-quickstart\logs" also under "crx-quickstart\launchpad\logs" so if you select ../logs/ it will go under "crx-quickstart\logs" only but you can change wherever you want to store. Again you can see this configuration info at http://localhost:4502/system/console/slinglog
3. You can also customize you log via creating at project level and assigning the "identifire" (with all other configure parameters) for more information you can refer http://sling.apache.org/site/logging.html apart from earlier share links.
I hope above will help you to proceed. Please let me know for more information.
Thanks,
Pawan

Logging CRS configuration changes

Hallo,
in a 10.1 RAC environment,
is there a file which logs CRS configuration changes, like issuing a oifcfg -setif command?
Thx

Yes

OSB file logging settings configuration

Dear Experts,
I need to know if it is possible to log on file all messages of error (i.e $fault variable) during a flow execution without using in the flow neither logs neither report. Is it possible ? If it is, which the correct WLS settings configuration ?
Regards,
Mike
Edited by: Mike.Di on 3-dic-2009 5.55
Edited by: Mike.Di on 3-dic-2009 5.57

I can only think of one solution: using the debugging/tracing facilities of OSB. You could enable execution tracing for a particular proxy service, or you could enable debugging of pipelines in the alsbdebug.xml file in your domain's home. For this WLS's log should have a severity level of debug. Of course this would mean you'd have a lot more messages in the log files, not just the errors. I would not recommend this for a production environment.
Why can't you use the Log action that's specially designed for sending messages to WLS's log file?

Logging API configuration trouble

Here is my Java code:
private static final String LOGGER_CONFIG_FILE="java.util.logging.config.file";
private static final String CONFIG_FILE="c:/logging.properties";
public static synchronized void init() {
System.setProperty(LOGGER_CONFIG_FILE, CONFIG_FILE);
try {
LogManager.getLogManager().readConfiguration();
} catch (IOException E) {
System.err.println("Error while reading logging configuration file \""+CONFIG_FILE+"\":"+E);
Here is my logging.properties:
handlers=java.util.logging.ConsoleHandler, java.util.logging.FileHandler
.level=INFO
com.mypackage.level=ALL
java.util.logging.ConsoleHandler.level = WARNING
java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter
java.util.logging.FileHandler.level = ALL
java.util.logging.FileHandler.formatter = java.util.logging.SimpleFormatter
java.util.logging.FileHandler.pattern=c:/java%u.log
java.util.logging.FileHandler.limit=50000
java.util.logging.FileHandler.count=1
Now here is my trouble:
when I'm running init() method all is ok !
when I'm trying to do something like this MyClass.getLogger().severe(msg); then there is an error message in my console:
Can't set level for java.util.logging.ConsoleHandler
Can't set level for java.util.logging.FileHandler
But the fact is, that my servere message is actually displayed in console and in my java0.log file :(
And the second trouble: all FileHanler's output is in XMLFormatter, but in config file there is SimpleFormatter set.
What are the problems, guys, please help !
Thanks

Help somebody, pleaseeee !

Can't log into configuration page

Hi guys,
i'm new to this forum and seeking help. I just got a new SPA 122 ATA device and i'm trying to loginto the admin page but i keep getting incorrect user/password message.
i'm typing admin/admin for pass and user and it's not working. I tried to reset the device via IVR menu pressin 73738# but IVR says invalid commmand. I also tried to reset it with the RESET button at the back of the device, but the password still did not work.
Can someone please help me
thanks

Hi Naf,
You don't mention if you purchased your new SPA122 from an authorized source or if you purchased it from an auction/resale site. The difference is if it was previously deployed by a service provider or skilled end user, they could have locked down the ATA so that you cannot access it without the correct login credentials.
Some suggestions:
Just to eliminate variables, make sure you use Internet Explorer to access the SPA122. There were issues with using other browsers with earlier SPA122 firmware in the 1.0.x range of firmware
Make sure that your computer is attached to the ETHERNET port of the SPA122
The computer should use DHCP and should have received an IP address of 192.168.15.100 from the SPA122Make sure that you are attempting to log in to http://192.168.15.1 from your connected computer. [admin / admin are the correct credentials for a factory default SPA122]
If all of the above fail and you're able, use Wireshark to determine what files your SPA122 is looking for. Once you know the file name, you can build a configuration file and set the admin user to something known so you can log in again, provided the SPA122 is not completely locked down by the previous user
Best of luck,
Patrick---

How has access.log file configured in WebLogic server 10.0?

1.) I am using BEA Weblogic 10.0 and my access.log is not getting updated.
2.) I also need any information as to how this Webblogic server forms chunks (ex....access00011.log,access00012.log) because i have a software called AWStats which merges all these chunks into 1 single access.log file under its subdirectory.
3.) I also need information as to how and where the user can specify/ form his own fields which gets displayed in the access.log
FYI i have 2 servers and i checked under Logging->HTTP->advanced, in both the servers options and configurations are same but in 1 it works fine and access.log is updating but not in the other one.
Kindly let me know i you have any leads into this issue!
Thanks,
Varun

Hi Ravish,
Firstly thanks for the reply.
1.) -----
What you can do is to set the buffer-size-kb parameter value to "0" in config.xml so that it can start logging once the server starts coming up rather then waiting for the default size which is 8kb to pass.
Something like below:
<web-server-log>
<buffer-size-kb>0</buffer-size-kb>
<web-server-log>
For more details check the below link:
Search for: CR302493
http://download.oracle.com/docs/cd/E11035_01/wls100/issues/known_resolved.html
--- for this issue i had browsed throught the forum before posting but in my conf file i have something like this instead of <buffer-size-kb>0</buffer-size-kb>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
<log-file-format>extended</log-file-format>
</web-server-log>
</web-server>
So how do i go about the path of debugging now??
2.) -------
If you do not want rotation of access.log then you can just disable it from the below console path just by putting Rotation type as None
Server -> <YOUR_SERVER_NAME> -> Logging (tab) -> HTTP (sub-tab) -> Rotation type: None
---- for this in both my servers i have the settings like this,
Rotation type--> By Size
Rotation File size 5000
Begin rotation time 00:00
rotation interval 24
files to retain 7
and Log file rotation directory is left blank (to get created in same directory)
and also Rotate log file on startup is unchecked.
so??? what do you suggest!?
3.) ------
I also need information as to how and where the user can specify/ form his own fields which gets displayed in the access.log
---- regarding this, in my main server the access.log is getting updated and after 4.8Mb its creating 5Mb chunks. So, for example if the entire log is of 15 Mb then access.log stops updating at 4.98Mb and accesslog.out0001 and accesslog.out0002 is created with 5Mb each but the latest entry will be stored in accesslog.out0002 file. I hope i didn't complicate this :)
Regards,
Varun

Sync failed: WSUS update source not found on site 786. Please refer to WCM.log for configuration error details.

Hi,
I have installed SC 2012 SP1 + SQL Server 2012 CU2e
I followed the following guide:
http://www.windows-noob.com/forums/index.php?/topic/4427-using-sccm-2012-rc-in-a-lab-part-2-add-sup-and-wds/
And when Sync Failed, what could be went wrong?
I have copied the logs+screenshot, and would be thankful if someone can give expert advise.
Here is link : http://sdrv.ms/13kmHBQ
N.A.Malik

Hi,
I haven't tested myself but going to test the following:
WSUS is bit cranky for now but here is what I did to fix it:
1) Uninstall SUP role
2. Uninstall WSUS
4. Delete SUSDB from SQL Server if any
5. Restart Server
6. Install WSUS (Chose to install DB not WID)
7. Configured Updates to be stored locally
8. Run Post Deployment Configuration from Server manager
9. Started WSUS Admin Console and ran Wizard (also chose to connect for the catalog sync) up to the Point where you select the products. Here I canceled the wizard without choosing any products
10. Install SUP role in SCCM and configure the right Settings (WSUS on Server 2012 Defaults to its own admin Website and ports 8530 and 8531) and select the products you required.
11. Check following log file if WSUS does not sync with SCCM.
Path: C:\Program Files\Microsoft Configuration Manager\Logs
File Name:
WCM.log
wsyncmgr.log
12.) Starts synchronization in the sccm console
Source:
http://robiulislam.wordpress.com/2013/04/12/sccm-2012-installation/
N.A.Malik

Java Forte CE and J2ME Wireless Toolkit configuration

I installed Sun Java Forte V3.0 Community Edition and the J2ME Wireless Toolkit 1.0.3.
I not able to run a MIDlet for the PALM OS Emulator. Wen I execute the MIDLet suite, the output windows returns: "Error could not find a JVM"
- Does any body knows how to properly configure Java Forte to run application on the Palm OS Emulator (POSE).
- Does any body knows how to attach Sun Forte debugger for MIDLet applications ?
Thanks

hi,
First Install the forte and then install the j2mewtk.While installating j2mewtk chose integrated option.
For Palm OS emulator you have to set the POSE location.
Try out this.
Open ktolbar.
OpenProject.
select an application.(examples)
set device PalmOS_device.
Now run the application.
A window pop for u.
This may help you
good luck.
koka

Incompletion Log for Configurable Material

Hi,
The client wants to restrict the creation of sales order whenever a configurable material does not result in a material variant.
Is it posible to meet this requirement by standard SAP config in Incopletion Procedure or Status Profile?
Please advice.
Thanks
Sinduja

Make the item category that you are using for the Configurable Material as 'Not relevant for Pricing'
Then in your Sales order Header Incompletion procedure, add VBAK-NETWR field.
Now the order has to have a net value which is possible only if you have a material variant that would be relevant for pricing.

Access denied errors in domain logs after configuring Ldap and restricting access to users

Hi Experts,
I'm getting access denied errors in my domain logs , this log is written continiously ..Has any one encountered the same issue and fixed this?
####<Sep 2, 2014 2:30:07 PM EDT> <Error> <Default> <ftizsldmwapp001.ftdc.cummins.com> <AdminServer> <[ACTIVE] ExecuteThread: '27' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <096a131bdb6c126e:6cecae89:14834848020:-8000-0000000000009bc8> <1409682607304> <J2EE JMX-46335> <MBean attribute access denied.
MBean: EMDomain:EMTargetType=j2ee_application,name=em,type=EMIntegration,Application=em
Getter for attribute HostName
Detail: Access denied. Required roles: Admin, Operator, Monitor, executing subject: principals=[]
TIA,
-Karthik

Hi Experts,
I'm getting access denied errors in my domain logs , this log is written continiously ..Has any one encountered the same issue and fixed this?
####<Sep 2, 2014 2:30:07 PM EDT> <Error> <Default> <ftizsldmwapp001.ftdc.cummins.com> <AdminServer> <[ACTIVE] ExecuteThread: '27' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <096a131bdb6c126e:6cecae89:14834848020:-8000-0000000000009bc8> <1409682607304> <J2EE JMX-46335> <MBean attribute access denied.
MBean: EMDomain:EMTargetType=j2ee_application,name=em,type=EMIntegration,Application=em
Getter for attribute HostName
Detail: Access denied. Required roles: Admin, Operator, Monitor, executing subject: principals=[]
TIA,
-Karthik

Vendor Classification Change Log Activate : Configuration Change

Hi,
I want to know what is the process of activate Change Log for the Vendor Classification. Please suggest.
Rgds

You can see in Xk02 / Xk03 transaction - Environment tab - Field changes..

XMLDB log-level configuration

I've been searching for a document that will advise what the different log-level settings are that can be put into the xdbconfig.xml but I can't seem to find anything on this. The default level is set to 0 on install. That is what we current have it as. We are being required to make this a log-level of 1 but I don't know the implications of doing this.
Does anyone know where I can find more information regarding this? We have an Oracle 11.1.0.7 installation on AIX 7.1 -- any help would be appreciated.

Apparently the IRS does know, once again, more then I do ;-)
Seriously; The status of 2007 does not have changed for this feature.
The following is a feature that does work: http://www.liberidu.com/blog/2010/01/17/ora-31098-internal-event-to-turn-on-xdb-tracing
Also you can enable the listener logging/tracing which will also mention login attempts (and TCP/IP#, FQDN info btw).
The XFiles demo XMLDB app also shows a method on how to program this feature via XDB events and stuff...
The needed info, probably, can also retrieved by implementing Database Vault or the Database Firewall software (and yes, security comes at a cost).
http://www.oracle.com/technetwork/products/database-firewall/overview/index.html
Edited by: Marco Gralike on Sep 20, 2012 3:07 AM

Log configuration changes to syslog on Nexus 7000?

I need to be able to log any configuration changes to syslog on our Nexus switches. On IOS this is easy with the archive commands, but I'm a little stuck trying to do this on our Nexus gear. On the IOS gear I run the commands:
archive
log config
logging enable
logging size 100
hidekeys
notify syslog
How do I do the equivalent on NX-OS?

Cisco NX-OS can log configuration change events along with the individual changes when AAA command accounting is enabled.
With command accounting enabled, all CLI commands entered, including configuration commands, are logged to the configured AAA server. Using this information, a forensic trail for configuration change events along with the individual commands entered for those changes can be recorded and reviewed.
Because of this capability, it is strongly advised that AAA command accounting be enabled and configured.
Refer to the “TACACS+ Command Accounting” section of this document for more information.
The Nexus 7000, by default keeps a local accounting log of all the configuration commands entered on the device; you can view this with the 'show accounting log' command.
In NX-OS, we changed the way logging works. We keep a local accounting log of all the
configuration changes ("show accounting log"), but if you want to send those logs to a
server, it must be done with through a TACACS server. Please see the below documentation:
Configuring AAA on Nexus
TACACS command accounting
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Can the ACE be configured for logging configuration changes to syslog server ?

Hi,
On all our routers, switches and firewalls we've configured syslog so we get logs when configuration changes occur.
Is this possible on the ACE too ?
regards,
Sebastian

Hi Sebastian,
Yes it is possible but depends upong the logging level you have set. So logging trap 5 should be able to get you the configuration changes or command execution logs.
Nov 1 2013 11:20:33 : %ACE-5-111008: User 'admin' executed the 'logging buffered 6' command.
Nov 1 2013 11:20:48 : %ACE-5-111008: User 'admin' executed the 'no rserver testlog' command.
So you should see these level 5 logs on syslog if logging trap 5 is configured.
Let me know if you have any questions.
Regards,
Kanwal

Logging Toolkit Configuration

Similar Messages

Maybe you are looking for