Logic 9.17, Mountain Lion, and Alesis MultiMix 16 Firewire compatibility?
Does anybody know if the Alesis MultiMix 16 fire wire audio interface/mixer works with Mountain Lion and Logic 9.17 ? Any info would be helpful.
Thank You
Andyh56,
I am trying to set up my multimix 8 firewire in logic express 8 right now.
Could you email me and help me out please!!
Thanks,
-Brock
[email protected]
Similar Messages
-
Downloaded Mountain Lion and can't open Logic Express,How do you fix?
Wouldn't let me open 9.1.7 upgrade before because I didn't have Mountain Lion, and now I can't open Logic 9.0.0 to put the upgrade on.
Check this site:
http://roaringapps.com/apps:table/tags/_l/index_tags/_l
Shows some problems with Logic Pro 9 in ML (Logic express appears fine).
Just a wild guess: Is the installer of your version a PowerPC App? I have Final Cut Express - it is universal, but the installer is PPC and I can't use it to install. As a workaround, I have a working Snow Leopard partition and copied every file from there onto the same location on ML - it works fine. That assumes you know where all the files are located. -
I have just upgraded from Snow Leopard to Mountain Lion and now I can not open my copy of Logic 9.1 but Logic 8 and 7 are ok. What do I do?
Upgrade to Logic X
-
MBP mid 2009, Mountain Lion and PRESONUS FP10
Hello!
I have an opportunity to buy used Presonus FP10, but I am not sure is it completely compatible with my MBP - mid 2009, CORE 2 DUO and Mountain Lion and Logic Pro 9???
It is very good interface but a bit outdated, so I am worried! I don't want to spend my money if it won't work on my MAChine!
Thank you!Hi, Damon
I gave up from buying it. As I didn't get any valid information about FP, I stopped thinking about it. I've been looking all over the Internet and came up with Focusrite Saffire Pro 40. Somehow, I find it even better choice, so we will see it tomorrow! I hope it is boxed with Firewire Adapter (400-800), too. It is 777 KM which is about 500 $.
Is it worth the money?
If it is compatible with Lion, I assume it should work with ML, too! -
I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP
Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office. -
Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.
Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X. -
I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?
Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test. -
I just have just downloaded Mountain lion and I wanted to listen to music on my computer screen with my HDMI cable plug into my back of my screen and I wanted to talk to dictation on my regular standard iPhone headphone and I was wondering if it's all possible change your settings Mac Mini to set it so you can listen to those both like your headphones and use the mic in your headphones and there's no settings that would change in the Mac Mini so do there is a flaw in this system or I am just really really really really dumb.
You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
I think I finished installing Mountain Lion, and am at the "log in" page with the Mountain Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro, which is said to have the capabilities of running Mountain Lion.
BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP. -
I upgraded to Mountain Lion and now I can't use any of my software!
What a disaster and huge mistake. Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs. I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work! I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me. I never used Time Machine. Is there any way on earth I can revert back to my old operating software??? Please help. And if you haven't upgraded yet and are thinking about it. BEWARE - and don't do it. I've been reading that Mountain Lion isn't working with Microsoft applications either. Omy...I haven't even checked that.
and of course no one at Apple support can or will help melunaulu wrote:
It's not my Microsoft that I use much or am worried about. I can't run AutoCAD. and I can't update AutoCAD either. When I try to mount an update just to get it working, it says it can't run the DMG file. Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads. ***? and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***?
So basically I can't use ANY of the programs I ran before. And yes I have googled desperately all day. Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did. And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it! It's a complete disaster and I don't have the money or time to purchase and or reinstall everything. I am just screwed.
No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
And please .... Start Backing Things Up, you could lose it all without one, work included. -
I just upgraded to mountain lion and I can't figure out how to use messages... it wants me to use AIM or something like it, but I can't change the user... How do I do this??
See this Thread
-
I purchased Apple TV yesterday strictly to mirror my desktop to my TV. Now I find out my desktop is not supported? How can I mirror my iMac to my Apple TV? I am running Mountain Lion and the iMac is a 2.8 GHz with intel core 2 duo from early 2008.
Thanks for your help!You cannot officially do this Apple's way as they do not support your computer for Airplay.
There is a software solution called Airparrot that you may want to demo:
http://airparrot.com
Some people are pleased with it othes not so much.
AC -
I have both Mac OS Mountain Lion and Windows 8.1 32-bit installed....The machine is Macbook Mid 2009...Whatever i do i can't install and use bootcamp on the Windows side.........Apple Support says it only supports Windows 64-bit which my machine cannot install.......and when i tried to install Bootcamp 4 it says it only supports Windows 7 .........Is there no way to install and use Bootcamp without buying another computer?
Boot Camp - Apple Support
Boot Camp- System requirements for Microsoft Windows operating systems -
I don't know how to do this. I typed the question in the bar above, but apparently need to type it again here. I lost my entire address book when I installed Mountain Lion and have been unable to recover it. I know the information is in there as when I type in someone's name in an email the address always shows up right away. How can I find the information for my contacts and restore my address book? Do I need to go to the Apple Store that is 2 hours away and have an expert help me or can I find out how to do it online for free myself?
The auto-complete in Mail addresses comes from two sources: (1) The "Previous Recipients" list, which can be viewed via Mail > Window > Previous Recipients. (2) Your Address Book (now called "Contacts").
If you did in fact lose your Address Book - are you sure you don't have "Contacts" in your Applications Folder? - It sounds like you are getting addresses from source (1). If you did in fact lose your Address Book (now called "Contacts" !!), you will have to restore it from a backup.
charlie
Maybe you are looking for
-
Paging Problem in Converted PLD2CR General Ledger Report
dear expert, Now I'm trying to change the design of Converted PLD2CR General Ledger Report. At the time, I found some problem related paging. In my opinion, General Ledger report should be group with BP Code. In converted CR, I didn't see Group Idea.
-
I have an original iPad and an Ipad 2 right next to each other running the same app and showing the same streaming video and the original iPad seems to have better quality. Why would this be? It is quite a bit clearer on the old iPad than the new one
-
Hi All, While refreshing webi report in Bi 4.0, I am getting the following error: BW System PBP returned state DATA ACCESS PROBLEMS. Message= WARNING Error while retrieving data: JCO_ERROR_SYSTEM_FAILURE: Time limit exceeded. com.sap.ip.bi.bics.dataa
-
ITunes not working :( ... All info included.
Recently iTunes stopped working, and I got this error: Problem signature: Problem Event Name: BEX Application Name: iTunes.exe Application Version: 10.5.1.42 Application Timestamp: 4ebf7d7c Fault Module Name: MSVCR80.dll Fa
-
Load Runner - stress test for BI java report(WAD 7.0) error
Dear all: Our project implement the SAP Portal 7.0(NW2004s, BW/EP SP14) and before we go-live, we use the Load Runner 8.0 to test the performance of SAP BW Java reports. 1