Logic and Superior 2.0!?

Hello everyone! Trying to find out if anyone here uses Superior 2.0 or EzDrummer for recording with Logic or GB09?! Want to find other user's on here to share,give,ask advice learn how to use any of this software any better!

Yes, I use Superior 2, EZD and all expansion packs with Logic, but I don't use GB09. If you have any support queries, or even pre-sales questions, you might also try the Toontrack forum here.

Similar Messages

  • Hi need help! 2.2 or 2.4? Logic and maybe some video, I like GLOSSY!

    First off, I like the glossy and for video, crucial stuff, I could always get a 30" or whatever MATTE display for that down the road, but right now I can not seem to find any BENCHMARKS on 2.2 vs 2.4 for say LOGIC and how many more plug-ins you would get or not get.
    Right now on a Mac Pro (work) and was wondering if anyone knew where I could find such an article that compared the two for audio and or video use and how much of a gain would you get with the extra 200 which is really equal in old school to about 350 more megahertz and the extra 128MB of VIDEO.
    If someone could please explain as I plan on ordering one sometime next week.
    Thanks.
    P.S. Is it really a desk top replacement? Can it do the job with or without the added 7200 RPM drive? Is the USB or FIREWIRE 800 HD's fast enough to stream say orchestral samples without choking?
    In order of priority:
    a) Rock and Roll (Analog, Vocals, guitar (but plug in), bass, then plug ins for drum machines, still not sure on whether to go LOGIC or LE (I know, its a huge rip off (LE from Digi), but I like their Digi Strike - am hoping that Logic 8 and Groove Agent 3 will solve some of this.
    Lastly, how many displays can you drive from a MBP? Can you drive two? Do you think that will be a feature to come, or should I just get a Mac Pro and say the heck with it at home!
    Thanks!

    You will likely not find benchmarks for Logic as the HD and other internal components will play a huge roll in the performance you get from the applications and various plug-ins. Plug-ins put different strains on your processor, depending on the level of processing each plug-in requires.
    No, the MacBook Pro isn't a desktop replacement when it's being used for audio recording and mixing, especially when you compare it to a Mac Pro. No way will it beat out a maxed out eight-core Mac Pro. You'll get night and day performance differences in these two machines.
    It sounds like you'll be working with 4 tracks of stereo .. or possibly 10 mono tracks? If you state specifics about your method of recording and play-back and what audio interface you intend to use, we'll have a better idea of exactly how many tracks and plug-ins you actually intend/need to use simultaneously. Also, which plug-ins are you intending on using per channel? Are you going to utilize sends for global FX or rather, assigning fx to each and every channel separately?
    As to the external displays you intend on using, will one not be enough? You can attach up to a 30" cinema display if you buy the 256mb upgrade option (NVidia 8600m GT) using dual display mode to assign separate windows to each display.
    As to the difference you'll see by utilizing that upgrade, check this link out: http://www.apple.com/macbookpro/graphics.html
    My purchase advice is this if you MUST purchase a MacBook:
    2.4 MacBook Pro
    2GB of RAM
    7200rpm Internal 160GB HD Option
    Logic Express 7 (if you haven't used logic, there is a big, not huge learning curve - be warned) It's incredibly powerful.
    You said LE is a rip off? Of what? Pro Tools HD - yes, Logic 7? No. These two applications couldn't be more different. Logic is a sequencer/audio recorder and mixer/midi recorder with a fully customizable mixing environment and Pro Tools is the industry standard for audio editing, recording and mixing digital audio. Logic allows you to use stereo tracks and Pro Tools uses mono (split-stereo) tracks like you'll see in every professional recording studio.
    Go with Pro Tools LE if you think you'll be using mostly audio recordings versus utilizing midi-styled sequencing of audio units instruments. The MIDI and virtual instrument implementation within Logic is far superior to Pro Tools in my opinion.
    If you're looking for a great virtual rock-n-roll drummer plug-in, you'd be doing yourself a disservice by overlooking Quantum Leap Ministry of Rock. This plug-in also features guitar and bass instruments sure to please any rocker. For orchestral samples, try Quantum Leap Symphonic Orchestra plug-ins.
    What's your budget for this recording rig you're planning on putting together? Also, what are you planning on monitoring your output with? ADAM S2.5A studio monitors? Genelec 8050A monitors? Mackie HR824 mk2s?
    What are you using for a DAC? The Benchmark DAC-1?
    More details please...

  • Logical AND in MDX Reporting Services Parameter

    Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
    (http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
    But I'm not sure how to apply this to a parameter's MDX dataset.
    Here is an example of the automatically generated MDX which uses logical OR:
    This is the drop down parameter:
    WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
    [Measures].[ParameterValue] AS
    [Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
    [Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
    SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
    [Measures].[ParameterLevel]} ON COLUMNS
    , [Department].[Department].ALLMEMBERS ON ROWS
    FROM [MyCube]
    And the demo report dataset is:
    SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
    NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
    DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
    ( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
    ON COLUMNS FROM [MyCube]) WHERE
    ( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
    STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
    CELL PROPERTIES VALUE,
    BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
    FONT_NAME, FONT_SIZE, FONT_FLAGS

    Hi,
    I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
    Example 1
    SELECT
    {x} ON COLUMNS,
    {ROWS_SET} ON ROWS
    FROM
    (SELECT StrToSet(@Param1) ON COLUMNS FROM
    (SELECT StrToSet(@Param2) ON COLUMNS FROM
    [CUBE_NAME]
    Or crossjoin between 2 parameters
    SELECT
    {x} ON COLUMNS,
    {ROWS_SET} ON ROWS
    FROM
    (SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
    [CUBE_NAME]
    Jiri
    Jiri Neoral

  • What is a  Logical and Physical file path in sap?

    what is a  Logical and Physical file path in sap?

    Hi,
    Physical file is what you see from the OS level.
    Logical file is what ABAP code can call certain functions to read/write.
    Transaction FILE would link them together. Typically the logical path ends with "<FILENAME>", and the logical file refers to the logical path.
    To extract the physical path from the logical path name
    DATA: lf_mandt TYPE sy-mandt,
            lf_opsys TYPE sy-opsys.
      lf_mandt = sy-mandt.
      lf_opsys = sy-opsys.
    To extract the physical path from the logical path name
      CALL FUNCTION 'FILE_GET_NAME'
        EXPORTING
          client           = lf_mandt
          logical_filename = p_unix
          operating_system = lf_opsys
        IMPORTING
          file_name        = gwa_input
        EXCEPTIONS
          file_not_found   = 1
          OTHERS           = 2.
      IF sy-subrc EQ 0.
      Concatenating the physical path and the input unix file name
        CONCATENATE gwa_input p_file INTO gf_file .
      ENDIF.
    Reward if helpful.
    Regards,
    Ramya

  • Logical AND not working in the forum search box

    Logical AND of search terms does not seem to be working in the MSDN forum search box. Example: I go to the Project Customization and Program forum and type the word
    subproject
    in the search box. I get a lot of hits. So now I try to reduce the number of hits by typing
    subproject AND read
    Surprisingly, I now get MORE hits than before.   The same thing happens if I enter
    subproject & read
    Do the MSDN forums not support the standard logical AND combinations of search terms?  If they do support these combinations, what is the syntax?
    Jim
    ...Jim Black

    Cheers, you're welcome.
    There's a thread going in the Suggestions forum with plenty more requests for updates to the search tool. You may want to add your voice there too:
    http://social.technet.microsoft.com/Forums/en-US/9cf8ad4b-5111-4f84-9809-99cd8f1b7152/make-the-forum-search-tool-useful?forum=suggest
    Don't retire TechNet! -
    (Don't give up yet - 12,950+ strong and growing)

  • Logical and physical clear in ASO

    Hi There,
    I found one statement for Logical and physical clear in essbase dbag
    The process for logically clearing data completes in a length of time that is proportional to
    the size of the data being cleared.
    The process for physically clearing data completes in a length of time proportional to the
    size of the input data, not to the size of the data being cleared
    What does size of the input data actually means? How it is different from data being cleared.
    Thanks.

    What is interesting with these statements is based on them, you would think a logical clear would be slower than a physical clear. In reality, it is vastly faster. I took a 30 minute physical clear down to about 40 seconds with a logical clear. Logical clers create offsetting entries from the main cube in a slice to produce a result whila a physical clear deletes the actual data. The one thing about logical clears is rather than have #missing for cleared intersections you get zeros

  • Logical and physical file paths

    Hi,
    can anyone elobrate me  on what are logical and physical file
    paths ?

    hi,
    Follow this link
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3deb358411d1829f0000e829fbfe/frameset.htm
    File format determination (Required / optional fields and field checks).
    Logical File Path configuration through transaction 'FILE'. A new physical file path should be created on operating system level or an existing one can be used if agreed. The Basis team member should create a new file path at operating system level, if required.
    Hope this helps, Do reward.

  • Logical AND in Java Regular Expressions

    I'm trying to implement logical AND using Java Regular Expressions.
    I couldn't figure out how to do it after reading Java docs and textbooks. I can do something like "abc.*def", which means that I'm looking for strings which have "abc", then anything, then "def", but it is not "pure" logical AND - I will not find "def.*abc" this way.
    Any ideas, how to do it ?
    Baken

    First off, looks like you're really talking about an "OR", not an "AND" - you want it to match abc.*def OR def.*abc right? If you tried to match abc.*def AND def.*abc nothing would ever match that, as no string can begin with both "abc" and "def", just like no numeric value can be both 2 and 5.
    Anyway, maybe regex isn't the right tool for this job. Can you not simply programmatically match it yourself using String methods? You want it to match if the string "starts with" abc and "ends with" def, or vice-versa. Just write some simple code.

  • BEx Formula Use of 'Logical And' and Calculation for Gross Margin

    HI Bex gurus.
    Having an odd time with what should be a simple formula to handle the display of gross margin (GM). The goal here is to display GM% properly and the requirement is as follows
    If GM <= 0 then 0.0
      Else
    If GM > 0 and Sell > 0 then ( ( sell - cost /sell ) * 100 )
      Else
    If GM >0 and Sell = 0 then 100
    I am familiar with bex formulas and have referenced the help docs on booleans here -
    Boolean Operators - SAP Business Explorer - SAP Library
    But what is odd is that if I use a calculation or a CFK in the IF, THEN with a LOGICAL AND, the formula does not report correctly
    If I put in a static value, like 77, the expected logic is followed.  I have tried making sure have extra parentheses and changing the order of the statement, to no avail!  I could use some extra brains on this puzzling matter, so you help is greatly appreciated and will award points!
    Thanks
    lee lewis
    Here are the formulas in text and below screen shots.  Wish could copy and past formulas to and from editor!
    GM%77
    ( ( ( 'Order GM' >0 ) AND ( Order Sell  >  0 ) ) == 1) * 77 + ( ( ( 'Order GM'> 0 ) AND ( Order Sell == 0 ) ) == 1) * 100 + ('Order GM' <= 0) *0.0
    GM%
    ( ( ( 'Order GM' >0 ) AND ( Order Sell  >  0 ) ) == 1) * 'REF GM%' + ( ( ( 'Order GM' > 0 ) AND ( Order Sell == 0 ) ) == 1) * 100 + ('Order GM' <= 0) *0.0
    'REF GM%
    (order  sell - order cost /order sell ) * 100 )
    GM%77
    GM%

    Shouldn't you change on of the brackets in your REF GM% ?
    'REF GM%
    (order  sell - order cost /order sell ) * 100 )
    I would put that as
    'REF GM%
    (order  sell - order cost) /order sell  * 100 )
    Not sure what you mean with those red arrows... but in both cases you would be dividing by 0 (order sell = 0).

  • Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

    Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

    You can install it on 2 Apple computers

  • Noob needs help with Logic and Motu live setup.

    Hello everyone,
    I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
    Here's the scenario:
    I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
    Here's the confusion:
    There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
    Here's the goal:
    All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
    I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
    I want to be able to EQ and balance the ensemble via Logic.
    Here's another question:
    How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
    Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
    Thanks in advance,
    Chris

    You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
    1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
    2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
    3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

  • Difference between logical and virtual terms

    Hello,
    This is not purely oracle question; but in documentation so many times we find 2 terms:
    A. Logical
    B.Virtual.
    So what is the principle difference between logical and virtual? As I know physical is that which I can see and touch; while logical/virtual is that is imaginary. We say tablespace is logical not virtual; while Java Virtual Machine; not Java Logical Machine. So I want to know; what is the principle difference; why two words for an imaginary thing. Before posting question; I searched in google as “Difference between virtual and logical” but I couldn’t found the answer.
    Please quote your comments.
    Thanks & Kind Regards
    Girish Sharma

    Girish,
    I wont say that I am correcting you as this is like that half glass full/empty thing.May be what I see is half empty , you would see the same as half full.
    Well now coming to the explanation.I am saying honestly , I got more confused after reading your definitions.What do you mean by saing that tablespace is not virtual.I see it as purely virtual.We don't say it as virtual tablespace or logical tablespace but it is actualy logical/virtual, having no existance but just the definition right?
    How can you say that the size of virtual is larger than logcial?The size of tablespace is actualy the sum total of size of datafiles.So it actualy becomes very larger right?Much larger than JVM which is of few megs only.
    The point 3 totally knocked me out.I have no idea what you said.
    Ok I tell you this.Just remember the definition that Hans gave already.If you ask me than its the best definition that we can have. Just remember this and if some one asks you more further than give them your point 3 definition and tell them understand this ;-).Please don'tmind I am just kidding. Its just semantics.Don't get lost into it.You will find many people using both the terms interchangibly. So its ok.I shall stick with Hans's defintion,simple and concise.There are lot more other topics to dig upon in oracle.I can mail you lots of them.Spend time on those.Don't think that I am demotivating you.I understand you asked only because you have a doubt.But we got a good resolution of it and beyond that, its not of much use to dig it atleast not in the technial terms.
    Cheers
    Aman....
    PS:Are you on oraclecommunity.net?

  • I am trying to stop encryption in fire vault, but I keep getting the message, The target disk isn't eligible for reversion because it wasn't created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨

    I am trying to cease encryption in fire vault, Mac os x lion 10.7 4
    I keep getting the message,
    ¨The target disk isn’t eligible for reversion because it wasn’t created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨
    Please can someone advise the way to disable?
    Thank you.

    Are you using Boot Camp? See this discussion at MacRumors.
    Clinton

  • Diff between logical and physical file path

    Hi ,
    Could you please explain difference between logical and physical file path's and their importance in ABAP.
    Thanks and regards,
    shyla

    Hi
    The function module FILE_GET_NAME convert a logical path into its corresponding physical path.
    The advantage of using logical pathes within your applications is obivous:
    If you need to change the physical path you just adjust it within transaction FILE yet no changes are required to your application.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/ab3a57df3b11d189fc0000e829fbbd/frameset.htm
    The file names that you use in ABAP statements for processing files are physical names. This means that they must be syntactically correct filenames for the operating system under which your R/3 System is running. Once you have created a file from an ABAP program with a particular name and path, you can find the same file using the same name and path at operating system level.
    Since the naming conventions for files and paths differ from operating system to operating system, ABAP programs are only portable from one operating system to another if you use the tools described below.
    To make programs portable, the R/3 System has a concept of logical filenames and paths. These are linked to physical files and paths. The links are created in special tables, which you can maintain according to your own requirements. In an ABAP program, you can then use the function module FILE_GET_NAME to generate a physical filename from a logical one.
    Maintaining platform-independent filenames is part of Customizing. For a full description, choose Tools ® Business Engineer ® Customizing, followed by
    Implement. projects ® SAP Reference IMG. On the next screen, choose Basis Components System Administration ® Platform-independent File Names.
    For a more detailed description of the function module FILE_GET_NAME, enter its name on the initial screen of the Function Builder and choose Goto Documentation. On the next screen, choose Function module doc.
    Another way of maintaining platform-independent filenames is to use the Transaction FILE. The following sections provide an overview of the transaction.
    To create a logical filename, choose Logical filename definition, client-independent from the Navigation group box in Transaction FILE, then choose New entries. You define logical filenames
    You can either define a logical filename and link it to a logical path (as displayed here), or you can enter the full physical filename in the Physical file field. In the latter case, the logical filename is only valid for one operating system. The rules for entering the complete physical filename are the same as for the definition of the physical path for the logical file. To display further information and a list of reserved words, choose Help.
    If you link a logical path to a logical file, the logical file is valid for all syntax groups that have been maintained for that logical path. The filename specified under Physical file replaces the reserved word  in the physical paths that are assigned to the logical path. To make the name independent of the operating system, use names that begin with a letter, contain up to 8 letters, and do not contain special characters.
    Save your changes.

  • Diff  between logical and physical page ?

    hi
    what exactly difference between logical and physical pages?
    where to set page size in report designer?
    after seting paper size in report designer can i readjust in print dialogue box?
    which is will be effected?
    please explain

    A logical page can contain several physical pages. Assume you want to create a format which is larger then your printer is able to print, then you can define a logical size, which contains n pages horizontally and m pages vertically.
    To set the page size for your report have a look at the properties in the main section of your paper layout.
    Regards
    Rainer

Maybe you are looking for

  • Can't install hp solution centerin Windows 7 starter

    In order to save money on color ink, which we rarely use, in my officejet 4500 g510n,  I wanted to set all computers on the network to print with black ink only. To do this I have found that I must go thru the Hp Solution Center which  I have accompl

  • Exchange Server 2013 SP1 Standard: Installation failing can't progress

    I'm trying to install Exchange Server 2013 and I keep getting this error and I am unable to progress, I can't find any support on the issue and frankly I don't want to/can't afford to spend $500 to ask Microsoft for technical support (what kind of ra

  • Another semi dead G4 imac

    I recently purchased this machine second hand (private sale) It had a fresh install of 10.4.9 and everything seemed good for the first day or so. Then I started to get Kernel Panics. I have done all the usual stuff, except for the hardware disk check

  • Web Dynpro Configuration language

    Hi expert, When i createing the configuration for one web dynpro component, the language of the web page is German. But i log on the systmen in EN. Could anyone tell me how to change the language of  the configruantion page from GERMAN to EN? Best Re

  • Question for ipod in itunes

    i downloaded the new itunes and ipod updates and i usually just plug my ipod into the computer and listen to my ipod in itunes and i dont keep any songs in itunes to save space but i cannot figure out how to listen to my ipod in itunes now if anyone