Logic goes nuts when changing between 96k to 44.1k

Hi,
I need to restart my computer a few times until it finally allows me to move between sample rates (some arrangements are 44.1k most are 96k.)
I'm using Logic 8, PT 7.4 HD3 accel.
Any thoughts would be welcome.
Cheers
M
Message was edited by: mblack

I'm pretty sure that an external USB drive won't have the bandwidth to handle real time playback of 40 24/96 audio files.
20 44K files requires a quarter of the throughput compared to 40 96K files, hence why you don't see the problem working with 44K files or smaller track counts.
I presume your disk meter is peaking when playing back the song?
Try putting the audio files on a FW400, FW800 or eSATA drive - you'll get much better disk throughput.

Similar Messages

Video tracks disappear when changing between sequences in premiere CS6

Dear people, can you please help me find out why video tracks disappear when changing between sequences in premiere CS6.
All it shows is the audio track and it is maximized to the first frame of the sequence. Video tracks are there but hidden - although video IS showing up in the program monitor.
When I pull the tracks down in the timeline window using the dividing line between the video and audio tracks and set the sequence work area back it works fine, however it is a great annoyance having to do this every time when i swap between sequences.
Can anybody please suggest a solution to this?
I'd appreciate any help.
MD

This is the audio tracks problem i cannot overcome:
https://forums.adobe.com/thread/1586025
(basically every type of audio i drop/place onto the timeline becomes left channel only, regardless of it being music or camera-recorded audio.
In the source monitor everything plays back just fine, but when placed to the timeline - it becomes LEFT only.
Weird.... (or am I and not it)

My mouse goes nuts when listening to any au

Specs
3200+ AMD 64-bit 939
GB DDR400
6800OC
extreme-music sound card
I recently replaced my aging PCI52 to the extrememusic and now every time I play any audio what so every; my mouse goes nuts. It freezes and then moves across the screen. When all the audio is disabled my pc works fine.
Please help
Note:
Onboard audio is disabled

wow dancing mouse that react to music?? :smileyvery-happy: joking.....hehe
Have you try changing the mouse to other USB port(assuming you are using usb mouse)

N95 screen goes black when in between open and clo...

Just noticed today that the screen goes black when sliding open or closed. Screen comes back on when slider reaches open or closed. Is this like the blank screen fault that affected so many N80s ? I'm very disgusted that I have to pay to fix my 16month old (expensive) N95 for an ongoing issue with Nokia sliders that they HAVE NOT fixed in their design. Very poor support Nokia.
Nokia 808
Nokia CK-200

Scott your grieviences are justified... but there is always a solution to a problem...even if this is a strange problem to be handled in an off the routine way, be it so... once again best of luck! not blame nokia for anything...nokia rules as always and nokia's productions have become very slow now :-( i wish they could make trendy phones like sony, sleek and stylish with new features.in some ways, nokia gets a little boring with no new features.. i dont feel any differnce between the nokia n95 8gb, n96 and n85(which i currently own)!
Scott lets hope for the best :-)
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Ram preview green line goes away when changing zoom level

I did a ram preview of my project, about 12 seconds long. Everything looks good until I want to zoom in or out on the comp, then the green line disappears and I have to render it over again. I don't remember AE doing this before. If I zoom to say 25% and render part of the comp, then zoom to 50%, that part with the green line is gone. I can render a different segment of the comp while in 50% and switch back to 25%, and the green line from when I rendered at 25% is back. I've turned off adaptive resolution in the fast preview options, and I turned off the disk cache. Is this a bug or just the way AE works now? I'm using CS6 version 11.0.2 on Win7.

Actually, I think I am. I didn't notice it before, but when I zoom in, if I have the resolution set to Auto, it changes between quarter, half and full depending on the zoom level. I've never noticed that before, or maybe they only recently made it so it didn't say Auto all the time, but now says what effective resolution it's set to. So is that the answer to my problem? Leave it on full resolution (or whatever I need at the time)?

Logic goes crash when i play El Piano Scarbee R.S.P. '73 on EXS24

Hi!
My problem is - "Logic Pro unexpectedly quit" when i start play Scarbee R.S.P. '73 on EXS24
But there is one thing strange !
All work fine when i just playing on my midi contrllr
Logic go crash when i hold keys for about 6-8 seconds
Exeption:EXCBADACCESS(0x0001)
Codes: KERNINVALIDADDRESS(0x0001) at 0x20a78fff

Oh, I found a bit more information on this. I was able to make it crash even with my POD completely disconnected and recording from the laptop mic. But heres the process.
Create a new empty project (compose for instance). Add a stereo real instrument channel with record on. Block off 4 bars and set them up to loop. Hit 'R'. Wait for 4 loops. Hit Space. Wait a couple seconds. Hit 'R'. Boom it hangs every time.

Since upgrading to 3.6.15 some settings are not saved, and the alerts when changing between encrypted content are totally out of synch to the actually occurence

The settings dialog box cuts off the bottom ofthe box content as it seems to be having problems with font rendering.
Settings such as "Show download window" and "Ask me where to save" apparently revert to defaults rather than saving the settings.
The encrypted content alerts are out of synch. They claim to be going from encrypted to non-encrypted when neither page is encrypted. Or warn of non-encrypted content on an encrypted page when the whole page is unencrypted.
3.6.14 had none of these problems.

Update to 3.6.16 has fixed this problem.

"render.mov" file goes offline when roundtripping between FCP & STP

Hi there
I'm having an issue roundtripping between Final Cut Pro and Soundtrack Pro. I have some clips which need to be de-noised, so I right click and select "Send To > Soundtrack Pro Audio File Project", do the de-noising with no issue, then save the file and return to Final Cut - your standard roundtripping experience.
However, when Final Cut Pro updates the file in the timeline, it brings up a file offline warning, stating that "~/file.stap:render.mov" is missing. I attempt to reconnect the file by opening the .stap package and creating a duplicate of the render.mov file in there, and reconnecting that, however that brings up the error "The file does not have enough audio tracks to reconnect to "file.stap" at time [time] in sequence [sequence]", and the file remains unconnected and silent in the timeline.
I am selecting the "include source audio" option when saving out of STP. It is also worth noting that I have managed to get this to work once this morning, but not since then. It was also not doing it last week, so I'm not sure what I did differently with that first file this morning.
Any help?
Cheers!

Hi there
Sorry to take so long to come back to this but this project had to spend a little bit of time on the backburner whilst I worked on some other projects.
Thanks for your reply Robert, however saving the STP project as a different .stap file and then attempting to reconnect to it brings out the same error.
This is the error window I get:
!http://img35.imageshack.us/img35/4086/picture19r.png!
I've found that exporting the file as an AIFF and reconnecting to that seems to do the trick, however it is a bit of a roundabout way of doing things when you consider the way I'm trying to do it is the way I should be doing it, and a way that used to work. It's also a pain when you consider I have perhaps dozens of audio artifacts that need some form of audio post in Soundtrack Pro for this project alone.

Color changes between library/develop and web module

Hi there,
when changing between modules library/develop and web the color of the pictures changes. That means, pictures become darker and the red/orange colors become more intensive. Back to the library, everything is o.k. Webgaleries also change, but not normal exports.
Until yesterday everything worked wonderful, but then I updated from 3.0 to 3.3 and now there´s no more WISYWYG for the webgaleries!
Somedbody out ther who can help?
Thank´s, Tom

First up, Develop is the most current preview. Library previews depend on the preview settings and if they've been zoomed into recently. Web exports sRGB Jpegs and I believe the webcache files that are generated for preview are also. If you're using a Flash Gallery, then there is no colour management happening.
Is your monitor calibrated?

New outputs generated when changing logical system in output master record

Hi!
We are sending documents from ECC 5 to a legacy system via XI/PI. We are about to move from an old XI installation to a new PI installation. The output record used (for example in a billing document) is set up based on logical system. When moving from the old to the new platform, we need to change the output records from the old logical syste to the new logical system. However this leads to generation of new outputs in all billing docs when opened in change mode. This goes also for billing docs where we already generated outputs via lthe old logical system in the past. Is there any solution to prevent the automatic generation of outputs for documents where the condition type already was successfully processed (as it works when the logical system is not changed)?
Best regards
/Björn

Normally the same output is not supposed to be generated, unless 'Multiple issuing' checkbox is checked in the output type configuration.
Also you can probably add a requirement in the output determination procedure and check if output record already exists. Take a look at the standard 'Reprint' routine, kind of the opposite is needed in this case.

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?
Another thing is that on Skype, whenever i clicked to sharescreen it only show a complete black out window. nothing else.
Tried restore OSX mountain lion, doesn't work. what should i do?

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

DM3.0 EA2: Filter engineering changes between logical and relational model

Hi,
when I am engineering changes between logial and relational model there are some issues at filter handling for me:
- When the filter "Show Modified Objects" is activated, the filter works only on the first level, e.g. on Entity level. On attribute level all attributes are displayed, not only the attributes which have really been modified. It is possible, to show on every level only the really modified objects?
- I think, selecting a Filter condition is circuitous. All filter conditions except "Show All Objects" keeps activated when I choose another condition. So I have to deactivate "Show Deleted Objects" when I want to see only the modified objects. It is possible to choose another control element for filtering, e.g. disjunctive radio buttons?
I am running Data Modeler on Windows XP with german localization and the JDK 1.6.0_11 from Oracle SQL Developer.

I logged bug for that.
Philip

When is the data gobbling glitch going to be fixed between iphones

I have used almost 8 GB of data on a 6 GB plan and that plan was put into effect by Verizon because I blew through 6 GB. Before for 2 years with two computers and one iphone never went over 1 GB. When is the data gobbling glitch going to be fixed between iphones and wifi hot spots like Verizon 4G?

Apple has not said when they are going to fix it. And tech people at Verizon and ATT don't have a clue as to why it is happening. At least they gave me a credit on the usage. Users on other forums think it is a problem with ios 6 making iphones use up wifi data and it looks as if the wifi 4G device is using up all the data.

Can not access email addresses when they are a link. F/F goes nuts and "untitleed " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down thwe computer.

Can not access email addresses when they are a link. F/F goes nuts and "untitled " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down the computer

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Problem when user change between fields in ALV

Hi guys.
The problem is: In ALV reports, EDIT mode, when I change between fields, the new field gets selected (the data get selected in blue or gry color), so I can write over new values. The problem is that some users when try to change to another field, the new field doesnt get selected, so he needs to select all the value and then write the new values. Is it clear?
I checked with the user in another PC using his user in SAP and when she changes to another field, the new field gets selected. Then I checked in her PC doing the same, and when I moved to another field, the new field doesnt get selected, so i need to select myself and then write.
In my PC I can change fields, tabbing, and the new fields get select, but in her PC i can't do that.
Is it a problem of windows? or SAP logon?
Does anybody know about this issue?
Regards
Miguel
Edited by: Miguel Alvear on Oct 5, 2011 10:15 PM

I would have checked her GUI version. Maybe she has another version than you !!

Logic goes nuts when changing between 96k to 44.1k

Similar Messages

Maybe you are looking for