Logic/Main Stage won't run in Leopard. Repeated installation attempts.

Hopefully I can find some help here. I just upgrades from 10.4.11. Here are my steps -
Upgrade to 10.5.4, repaired permissions, ran all software updates
Main Stage crashes during loading, Logic crashes going through global/audio preferences
Installed 10.5.5 Combo update. No change. Repaired permissions. No change.
Trashed all preferences for all Logic Studio apps. No change.
Trashed everything Logic Studio, reinstalled Logic and Main Stage only. Installation successful. Ran software updates - successful. Still having the same problems. Main Stage crashes during load up. Logic crashes in preferences and settings windows. Repaired permissions. No change.
I have a M-Audio 410 running the old and new drivers didn't change. The problem persists regardless of using the internal audio source or the 410.
BTW, Pro Tools works perfectly. Reason works perfectly. iTunes/Quicktime work perfectly.
What can I do?
Thanks

rhsummers wrote:
Hopefully I can find some help here. I just upgrades from 10.4.11. Here are my steps -
Upgrade to 10.5.4, repaired permissions, ran all software updates
Main Stage crashes during loading, Logic crashes going through global/audio preferences
Installed 10.5.5 Combo update. No change. Repaired permissions. No change.
Trashed all preferences for all Logic Studio apps. No change.
Trashed everything Logic Studio, reinstalled Logic and Main Stage only. Installation successful. Ran software updates - successful. Still having the same problems. Main Stage crashes during load up. Logic crashes in preferences and settings windows. Repaired permissions. No change.
I have a M-Audio 410 running the old and new drivers didn't change. The problem persists regardless of using the internal audio source or the 410.
BTW, Pro Tools works perfectly. Reason works perfectly. iTunes/Quicktime work perfectly.
What can I do?
Thanks
It could be Protools related, especially since in the Global audio preferences, where you say Logic crashes, you can also set DAE. Try disabling DAE in Protools first perhaps? If that doesn't help, try trash DAE prefs.
Btw, how does it crash? "Quit Unexpectedly"? Or freezing and "not responding"? Do you get a crash report?
regards, Erik.
ps. compliments for your summary of the problem, core info all there, including all you've excluded and tried already. We'll sort it out...

Similar Messages

  • Downloaded Logic Pro and won't run

    Downloaded Logic Pro and won't run. Keeps telling me couldn't open due to a problem. It says to update my software or reinstall it but it' won't let update it neither.

    Bought the software in app store, installed it and it just won't run. I have OS X 10.6.8 just donwgraded from lion and safri wouldn't work either since.
    The error window tells me maybe I should re install the program or update my software. I've done both, donwloaded the upgrade (Logic pro 9.1.7) and the install helper keeps telling I can't updrade my software like that. I need to chek for actualization through my computer. But the computer actualization finder "thingy" won't find more softaware to update.
    This are the details shown in the error report: (I don't understand any of it)
    Process:         Logic Pro [372]
    Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
    Identifier:      com.apple.logic.pro
    Version:         ??? (???)
    Build Info:      Logic-17005700~2
    App Item ID:     459578486
    App External ID: 6130764
    Code Type:       X86 (Native)
    Parent Process:  launchd [119]
    Date/Time:       2012-04-17 08:24:13.051 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          25851 sec
    Crashes Since Last Report:           2589
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      EDA52A61-88BE-4D83-8D14-5CB718D2D6EB
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia
      Referenced from: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    Please help!! and thanks

  • Software drops, menus remain but won't run in Leopard

    I have just upgraded to Leopard and am suddenly losing apple apps after they are open for a few minutes. They don't totally crash, the window just disappears and the menu remains as if the window is there but none of the functions can be used. It started with Address book, and now iPhoto, and iTunes I discovered today.
    It seems to be happening on my newer laptop too. I have repaired the permissions on both and that hasn't worked. I have also tried opening on login but the program window just disappears for no apparent reason. I haven't found anyone else with this problem on the support threads. Has anyone had this happen?

    rhsummers wrote:
    Hopefully I can find some help here. I just upgrades from 10.4.11. Here are my steps -
    Upgrade to 10.5.4, repaired permissions, ran all software updates
    Main Stage crashes during loading, Logic crashes going through global/audio preferences
    Installed 10.5.5 Combo update. No change. Repaired permissions. No change.
    Trashed all preferences for all Logic Studio apps. No change.
    Trashed everything Logic Studio, reinstalled Logic and Main Stage only. Installation successful. Ran software updates - successful. Still having the same problems. Main Stage crashes during load up. Logic crashes in preferences and settings windows. Repaired permissions. No change.
    I have a M-Audio 410 running the old and new drivers didn't change. The problem persists regardless of using the internal audio source or the 410.
    BTW, Pro Tools works perfectly. Reason works perfectly. iTunes/Quicktime work perfectly.
    What can I do?
    Thanks
    It could be Protools related, especially since in the Global audio preferences, where you say Logic crashes, you can also set DAE. Try disabling DAE in Protools first perhaps? If that doesn't help, try trash DAE prefs.
    Btw, how does it crash? "Quit Unexpectedly"? Or freezing and "not responding"? Do you get a crash report?
    regards, Erik.
    ps. compliments for your summary of the problem, core info all there, including all you've excluded and tried already. We'll sort it out...

  • Captivate 5.5 - SCORM Project won't run after Captivate 7 installation

    Good afternoon,
    I had completed a Captivate 5.5 project for a few months and as of about a month ago I have had Captivate 7 installed on the machine. Due to some widgets that are implemented in the project that only run in 5.5, I have not used Captivate 7.
    I also have not had cause to reopen the project until recently to make some changes. However, now when I publish the files, package them in the MultiSCO Packager, and put them in CMS  - it won't run.
    I've verified that the CMS is not the issue: if I repost the pre-Captivate 7 version it works just fine and the only changes I made to the original files were cosmetic and minor.
    Now when I republish the files in 5.5 and package them, the files look different, publishing all of the zips into a "Linear" subfolder. I couldn't help but notice that this is the same as Captivate 7 publishes except without any accompanying XML files. Why would Captivate 5.5 be affected by Captivate 7 being updated on the machine?
    Is there any solution to this other than having to open the 5.5 files in 7 and replace every widget? This is a huge expenditure of time when I was under the impression that if 5.5 was still installed it would run completely independent of the Captivate 7 changes.
    Any help would be appreciated,
    Jaimeson

    Don't be too quick to write off the LMS/CMS as the issue.  You need to be aware that with Cp6 Adobe totally revamped their SCORM drivers so there is now little similarity between output of 5.5 to 7 in this area.  It is also no longer possible to use Cp7 SCORMs in the Cp5.5 era Multi-SCORM Packager tool.  They are not compatible.  You must make sure the CP7 SCORMs are matched with the Multi-SCORM Packager that came with Cp7.
    Once you get compatible SCORMs published, try uploading them to SCORM Cloud LMS to test.  If they work fine on SCORM Cloud then they should work on your CMS (if it is truly SCORM compliant).
    Your issue with the widgets not working in Cp7 might be resolvable if you update the widgets.  Have you checked with the original widget developer to see if they have updates available?  If you have several widgets of the same type and version in each project file, then there is a trick to updating all of them in one go (per project file).
    See the heading in the lower part of this page:
    http://www.infosemantics.com.au/adobe-captivate-widgets/widget-updates
    But be warned that this only works if the widget filename is exactly the same, and you are doing this from the same computer that was used to originally insert the same widgets, because the path to the external widget file must be replicated.

  • Logic won't run after leopard upgrade

    I recently upgraded to OS X Leopard and ever since I upgraded, Logic has been giving me this error:
    Logic Express has detected a possible conflict
    between one or more third party MIDI or audio drivers.
    I use the tascam us-224 I/O, and before the upgrade, it worked great.
    any help on how to get logic to work again would be very appreciative.

    Looks like you're tripping over driver issues. You'll need to go to the websites of all the hardware and inserts that are part of your system and get Leopard compatible drivers. I know, I know. They ought to work but they don't. There appears to either be poor backward compatibility or the third parties are crap at coding.
    Others have reported that more recent products than the 224 are not working (despite the Tascam website saying they do). The 224 is now officially a Legacy product. You may be out of luck but, at the least, you need to check what Tascam support says.
    Best of luck - their "customer support" is the stuff of legends...
    Pete

  • Logic 9.0 won't run on osx 10.7.3

    macbook pro, core 2, 2.4 gig
    just installed logic 9.0 on osx 10.7.3, error says that this version of logic wont run on this os.
    any clues?
    scott

    yep, sometimes I'm not to bright. Can't believe I didn't do that.
    thank you
    scott

  • Logic express 8 won't run the update I downloaded

    I have a registered working version of logic express 8. I downloaded the update and when I try to run it it says "An eligible Logic Express Version was not found in the Applications Folder. This Update requires Logic Express version 8.0"
    I have a Macbook Pro running 10.6.8
    Any suggestions?

    For those interested, I reinstalled Logic Express and all the Jam Packs were there. I then installed update 8.01 and all of them were gone from the loop browser except the aforementioned Voices and World Music. I have reinstalled and updated three times. Same result each time. Obviously, something is wrong with the update. I'll sit out the update until 8.02 is released and maybe that will fix this problem.

  • Activity Monitor won't run after leopard install

    The only problem i'm having is that when i try and load Activity Monitor it bounces once and crashes. No amount of relaunches and reset/relaunches fixes the problem.
    Any ideas? I've also tried launching the old tiger version of Activity Monitor that is on one of my SuperDuper backup external drives, but no luck.
    Thanks,
    Conrad

    I apologize for the poor formatting. I did a filter for Activity and found these references to the crash. It looks like i'm missing a framework required for displaying the graphs that activity monitor uses. Any advice on how to go about replacing that?
    Thanks
    10/31/07 9:46:16 PM [0x0-0x20a20a].com.apple.ActivityMonitor[6429] dyld: Library not loaded: /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
    10/31/07 9:46:16 PM [0x0-0x20a20a].com.apple.ActivityMonitor[6429] Referenced from: /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
    10/31/07 9:46:16 PM [0x0-0x20a20a].com.apple.ActivityMonitor[6429] Reason: image not found
    10/31/07 9:46:16 PM ReportCrash[6430] Formulating crash report for process Activity Monitor[6429]
    10/31/07 9:46:16 PM ReportCrash[6430] Saved crashreport to /Users/conradstoll/Library/Logs/CrashReporter/Activity Monitor2007-10-31-214616Conrad-Stoll.crash using uid: 501 gid: 20, euid: 501 egid: 20
    10/31/07 9:46:16 PM com.apple.launchd[142] ([0x0-0x20a20a].com.apple.ActivityMonitor[6429]) Exited abnormally: Trace/BPT trap
    10/31/07 9:46:19 PM [0x0-0x20c20c].com.apple.ActivityMonitor[6433] dyld: Library not loaded: /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
    10/31/07 9:46:19 PM [0x0-0x20c20c].com.apple.ActivityMonitor[6433] Referenced from: /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
    10/31/07 9:46:19 PM [0x0-0x20c20c].com.apple.ActivityMonitor[6433] Reason: image not found
    10/31/07 9:46:19 PM ReportCrash[6430] Formulating crash report for process Activity Monitor[6433]
    10/31/07 9:46:19 PM ReportCrash[6430] Saved crashreport to /Users/conradstoll/Library/Logs/CrashReporter/Activity Monitor2007-10-31-214619Conrad-Stoll.crash using uid: 501 gid: 20, euid: 501 egid: 20
    10/31/07 9:46:19 PM com.apple.launchd[142] ([0x0-0x20c20c].com.apple.ActivityMonitor[6433]) Exited abnormally: Trace/BPT trap
    10/31/07 9:46:21 PM ReportCrash[6430] Formulating crash report for process Activity Monitor[6434]
    10/31/07 9:46:21 PM ReportCrash[6430] Saved crashreport to /Users/conradstoll/Library/Logs/CrashReporter/Activity Monitor2007-10-31-214621Conrad-Stoll.crash using uid: 501 gid: 20, euid: 501 egid: 20
    10/31/07 9:46:21 PM [0x0-0x20d20d].Activity Monitor[6434] dyld: Library not loaded: /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
    10/31/07 9:46:21 PM [0x0-0x20d20d].Activity Monitor[6434] Referenced from: /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
    10/31/07 9:46:21 PM [0x0-0x20d20d].Activity Monitor[6434] Reason: image not found
    10/31/07 9:46:21 PM com.apple.launchd[142] ([0x0-0x20d20d].Activity Monitor[6434]) Exited abnormally: Trace/BPT trap

  • Yahoo Widgets Won't Run

    Hello, I posted this in another group and have had no responses so I thought I'd try here.
    I downloaded the Yahoo Engine and several Yahoo widgets onto my MacBook but they won't run. The Engine installs but none of the widgets appear.
    I downloaded the same Engine and widgets on my Mac Pro and they run just fine.
    Does anyone know why my MacBook would not run them while my Mac Pro does?
    Thanks,
    Lisa

    Answered in another forum. Thanks.

  • Leopard Upgrade Installer Does Not See Hard Drive

    I am trying to run the Leopard Upgrade installer on my G4 1Ghz x 2 PowerMac, but the installer thinks for a couple seconds and then tells me "Mac OS 10.4 or later can not be found on your computer" even though it is running 10.4.10.
    Also, if I go to the Startup Disk or Disk Utility window, my hard drive does not show up.
    Anyone found a solution to this problem?

    Good to know for the future. I agree with the writer. A progress bar would have been nice...
    I had other issues than that, unfortunately. The installation started off fine (meaning, it found my HD right away and started chugging along), then ended up with the "installation failed" error. After that, it couldn't detect the HD, either with Startup Disk or through the installer.
    That's when I ran Disk Utility. Seemed to work.
    Now, I'm tempting fate by trying things again. Glutton for punishment? Maybe.

  • Loading Plug in Sounds To Main Stage & Logic

    I'm pretty new to this whole Audio Units world.
    I just bought Komplete to add to my sounds in Logic. I've gone throw the whole install and the Native Instrument Packs show up under the Audio Units Manager as successfully validated, but nothing shows up in the Channel Settings. Am I missing a a step to this or something? How do I use the sounds from Komplete with Logic and Main Stage?

    A channel strip setting is a Logic thing and third party plug-in content won't show up there. A channel strip setting is a combination of plug-ins that make up a Logic mixer strip. You will need to create the channel strip setting you want, say Kontakt as the software instrument with reverb, compression and EQ then save that combination as a channel strip setting.
    Obviously there's a load of content supplied with the installation of Logic but this is all made from Logic's built-in plug-in. Sounds for Kontakt need to be loaded using Kontakt UI which can then be saved as a channel setting for later use.
    Make sense? cheers!

  • Main Stage and Logic.

    While using Main Stage I'd like to trigger a sequence in Logic, is this possible, and if so how? Thanks.

    Why would you need both?
    You use Mainstage when you want Logic's sounds, but don't want to run the full sequencer engine.
    If you do want the sequencer engine, then just run Logic and use the sounds from within that. Using the two together seems... counter-productive...
    But yes, you could use the MIDI IAC bus to send MIDI from Mainstage to Logic, but you'll also have to block that port in Logic otherwise both applications will receive the MIDI data at once, which is something you don't want.

  • I have a mid 2009 MacBook Pro 5,3 Unibody that won't run anything past Leopard.

    I have a mid 2009 MacBook Pro 5,3 Unibody that suffered a minor liquid spill.  After waiting for it to dry out, we found that it powers up (but the display doesn't work unless connected to an external monitor) just fine.  For several months it worked like a tank running Snow Leopard.  I upgraded to Lion with no problems.  Once the 10.7.1 update came out, it completely flipped out and wouldn't finish the install.  I was forced to take it all the way back to Leopard and now it won't upgrade past Leopard.  I replaced the hard drive completely and tried a fresh install of Lion using the thumb drive and that didn't work either.  I got the set of errors you will find below.  (Sorry, I don't know how to hide them like you can in some forums.)  Any ideas or suggestions on why it won't install Lion would be great.  I'm not so concerned about the display as wondering why it worked for 4 months and then another month on Lion and then suddenly flipped out on me.  I'm not knowledgeable enough to decipher the message below. 
    Jun 26 10:16:11 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
    Jun 26 10:16:14: --- last message repeated 5 times ---
    Jun 26 10:16:14 christine-cowens-macbook-pro authexec[158]: executing /Volumes/Mac OS X Install DVD/Install Mac OS X.app/Contents/Resources/InstallAssistantTool_10_5
    Jun 26 10:16:17 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
    Jun 26 10:16:18: --- last message repeated 1 time ---
    Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xa00a].com.apple.systemuiserver[98]: Unexpected reply from backup server - ignored
    Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xb00b].com.apple.finder[99]: Unexpected reply from backup server - ignored
    Jun 26 10:16:25 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
    Jun 26 10:16:55: --- last message repeated 11 times ---
    Jun 26 10:17:53 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
    Jun 26 10:18:23: --- last message repeated 9 times ---
    Jun 26 10:21:50 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
    Jun 26 10:22:20: --- last message repeated 7 times ---
    Jun 26 10:22:21 christine-cowens-macbook-pro com.apple.launchd[72] ([0x0-0x14014].com.apple.installassistant[150]): Stray process with PGID equal to this dead job: PID 158 PPID 1 InstallAssistant
    Jun 26 10:22:22 christine-cowens-macbook-pro loginwindow[23]: DEAD_PROCESS: 0 console
    Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: reboot by christinecowen:
    Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: SHUTDOWN_TIME: 1340731342 279916
    Jun 26 10:22:22 christine-cowens-macbook-pro mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: stopping
    Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: Shutdown NOW!
    Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: System shutdown time has arrived^G^G
    Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled.  No checking performed.
    Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
    Jun 26 10:31:07 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy): Unknown key for boolean: EnableTransactions
    Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.usbmuxd): Unknown key for boolean: EnableTransactions
    Jun 26 10:31:07 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    Jun 26 10:31:07 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    Jun 26 10:31:07 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
    Jun 26 10:31:07 localhost kernel[0]: npvhash=4095
    Jun 26 10:31:07 localhost kextd[10]: 417 cached, 0 uncached personalities to catalog
    Jun 26 10:31:07 localhost kernel[0]: hi mem tramps at 0xffe00000
    Jun 26 10:31:07 localhost kernel[0]: PAE enabled
    Jun 26 10:31:07 localhost kernel[0]: 64 bit mode enabled
    Jun 26 10:31:07 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
    Jun 26 10:31:07 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Jun 26 10:31:07 localhost kernel[0]: vm_page_bootstrap: 905993 free pages and 77047 wired pages
    Jun 26 10:31:07 localhost kernel[0]: mig_table_max_displ = 79
    Jun 26 10:31:07 localhost kernel[0]: 104 prelinked modules
    Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for mb
    Jun 26 10:31:07 localhost kernel[0]: Seatbelt MACF policy initialized
    Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    Jun 26 10:31:07 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Jun 26 10:31:07 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Jun 26 10:31:07 localhost kernel[0]: MAC Framework successfully initialized
    Jun 26 10:31:07 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
    Jun 26 10:31:07 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    Jun 26 10:31:07 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Jun 26 10:31:07 localhost kernel[0]: mbinit: done
    Jun 26 10:31:07 localhost kernel[0]: Security auditing service present
    Jun 26 10:31:07 localhost kernel[0]: BSM auditing present
    Jun 26 10:31:07 localhost kernel[0]: rooting via boot-uuid from /chosen: CFA77CDA-F33D-3F25-97CF-9E5EE113C739
    Jun 26 10:31:07 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Jun 26 10:31:07 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
    Jun 26 10:31:07 localhost kernel[0]: 5.10.91.21
    Jun 26 10:31:07 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 0025bcfffee5710e; max speed s800.
    Jun 26 10:31:07 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9500420AS Media/IOGUIDPartitionScheme/Untitled@3
    Jun 26 10:31:07 localhost kernel[0]: BSD root: disk0s3, major 14, minor 3
    Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 2878464 to: 2969088 (joffset 0x4b7000)
    Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: journal replay done.
    Jun 26 10:31:07 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
    Jun 26 10:31:07 localhost kernel[0]: Jettisoning kernel linker.
    Jun 26 10:31:07 localhost kernel[0]: Resetting IOCatalogue.
    Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
    Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
    Jun 26 10:31:07 localhost kernel[0]: Matching service count = 2
    Jun 26 10:31:07 localhost kernel[0]: Matching service count = 4
    Jun 26 10:31:07: --- last message repeated 4 times ---
    Jun 26 10:31:07 localhost kernel[0]: Matching service count = 5
    Jun 26 10:31:07 localhost kernel[0]: NVDANV50HAL loaded and registered.
    Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
    Jun 26 10:31:07 localhost kernel[0]: Previous Shutdown Cause: 3
    Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe(MacBookPro5,3)
    Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe fails
    Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
    Jun 26 10:31:07 localhost kernel[0]: AGC: 2.8.15, HW version=1.8.8, flags:0, features:1
    Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
    Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
    Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
    Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
    Jun 26 10:31:07 localhost kernel[0]: Matching service count = 0
    Jun 26 10:31:09 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
    Jun 26 10:31:11 localhost bootlog[36]: BOOT_TIME: 1340731864 0
    Jun 26 10:31:11 localhost rpc.statd[18]: statd.notify - no notifications needed
    Jun 26 10:31:11 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
    Jun 26 10:31:11 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
    Jun 26 10:31:12 localhost fseventsd[27]: bumping event counter to: 0x25d156 (current 0x0) from log file '000000000025c40a'
    Jun 26 10:31:13 localhost kernel[0]: NVEthernet: Ethernet address 00:25:bc:e5:71:0e
    Jun 26 10:31:13 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:26:08:e3:43:79
    Jun 26 10:31:13 localhost blued[45]: Apple Bluetooth daemon started.
    Jun 26 10:31:14 localhost mDNSResponder mDNSResponder-176.3 (Nov  3 2008 16:52:57)[22]: starting
    Jun 26 10:31:14 localhost com.apple.usbmuxd[15]: usbmuxd-268.5 on Apr  5 2012 at 15:33:48, running 32 bit
    Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
    Jun 26 10:31:15 localhost kernel[0]: NVEthernet::mediaChanged - Link is down
    Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
    Jun 26 10:31:15 localhost kernel[0]: AirPort: Link Down on en1
    Jun 26 10:31:15 localhost kernel[0]: jnl: disk0s2: replay_journal: from: 9485824 to: 9519104 (joffset 0x9d9000)
    Jun 26 10:31:15 localhost /usr/sbin/ocspd[68]: starting
    Jun 26 10:31:15 christine-cowens-macbook-pro configd[34]: setting hostname to "christine-cowens-macbook-pro.local"
    Jun 26 10:31:16 christine-cowens-macbook-pro kernel[0]: jnl: disk0s2: journal replay done.
    Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: 802.11d country code set to 'CN'.
    Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 149 153 157 161 165 153 161 149 157
    Jun 26 10:31:19 christine-cowens-macbook-pro org.ntp.ntpd[14]: Error : nodename nor servname provided, or not known
    Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: can't find host time.apple.com
    Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: no servers can be used, exiting
    Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: Auth result for: c8:3a:35:56:9b:80 MAC AUTH succeeded
    Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: AirPort: Link Up on en1
    Jun 26 10:31:21 christine-cowens-macbook-pro kextd[10]: writing kernel link data to /var/run/mach.sym
    Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window Started Security Agent
    Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismInvoke 0x129e00 retainCount 2
    Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismInvoke 0x1015f0 retainCount 1
    Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window - Returned from Security Agent
    Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismDestroy 0x1015f0 retainCount 1
    Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismDestroy 0x129e00 retainCount 2
    Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: USER_PROCESS: 23 console
    Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[82]): Exited: Terminated
    Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
    Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (org.x.startx): Unknown key for boolean: EnableTransactions
    Jun 26 10:31:26 christine-cowens-macbook-pro /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christine Cowen's Public Folder) returned -14135

    Might have a hardware issue that was caused by the minor liquid spill.
    Take it to Apple to have them look at it.  I think they do a free diagnostics.  That way you can find out what's wrong with your MB.
    Good luck....Hope you get it sorted out.

  • Cloned HD running Snow Leopard won't boot in new MBP running Lion., cloned HD running Snow Leopard won't boot in new MBP running Lion.

    Hi, I've seen a lot of discussion on this topic but nothing specific to my situation.  I have two macs, a personal mac (macbook running Snow Leopard vers. 10.6) and a newer work macbook pro (late 2011 running Lion vers. 10.7.5).  I want to use some of the applications at work (that is on the Macbook Pro) that are on my home macbook with Snow Leopard.  I cloned the entire HD of my Macbook onto an external drive.  The clone seems to have worked as I can use it as a boot disk for the macbook (from which it was cloned).  However, if I try to boot the MacBook Pro running Lion, with this same clone on the external drive it won't work.  I get a bit of text in the background and an overlay in dark grey saying (in several languages) restart the Mac by holding down the start key etc.  I don't know if this has to do with the kernel panic problem or the Lion restore disk business.  I don't see the point in trying to do an internal partition of the MacBook Pro hard drive and then add the cloned Snow Leopard, if I can't get the thing to boot externally as it is. 
    Does anyone have any fixes for what really should be a simple proceedure but is not?

    Make sure the mac you are cloning from has the combo 10.6.8 update applied to it. The late 2011 models need at least 10.6.7 and better with 10.6.8. So if your older mac is running anything lower than 10.6.7 it will not boot on the 2011 model.

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

Maybe you are looking for

  • Performance While Gaming On Macbook Pro 15" (mid 2012)

    Hi I have asked this question a few times now but I think I may be able to better describe it now after analysing cause and effect. Now I don't know exactly what Mac OS X does to optimize perfromance in fullscreen, but I think in my case it is workin

  • How can i get my bookmarks back, after mozilla crashed and got stuck in safe mode?

    I was using mozilla as usual when suddenly it crashed and then my computer turned off. i restarted it and said it had gone into safe mode. i tried to restart the computer again but it was stuck on safe mode. The bad part is that all my bookmarks are

  • Validations in GL Master Records

    Hi Gurus, My client wishes to have checks in creations of GL Master Records e.g. for creation of an account on putting the account group the system will check if the radio button "P and L Account or Balance Sheet Account", is correct or not, etc. The

  • Another Function Question

    I have created the following Function: CREATE FUNCTION f_defer_future_payments (Vendor_id varchar2, User_id varchar2, Start_date date, End_date date, Defer_to_date date RETURN NUMBER IS original_start_date date; original_end_date date; original_defer

  • Accessibility zoom crashes since ios 8.2 update

    I'm visually impaired and so I use the zoom feature for most of my experiences with ios devices. it is the main reason I converted to Aplple products. No other company that I've seen, has a zoom feature that allows me to zoom in on apps that don't su