Logic Pro 8 midi controller or caps lock won't process midi

OK. I was trying to figure out WHY my arpeggiator will only allow me to use a zone higher than C-2. I need to be able to use C-1 and above (Ultrabeat). So, I read somewhere that it could possibly be something with the control surface. So I go digging over there. At that moment I did nothing but check and close everything out. I didn't change anything. Then, my midi won't work from my controller or caps lock. So I worsened things (probably) by resetting midi in the "midi" setting in preferences AND scanning for surfaces in the control surfaces panel. Now get this...it only applies to this song. It is perfectly fine on any other songs I open. I also notice now that there is a white bar to the left of the tracks. It doesn't appear to be nothing serious though. Please someone help me. I have a serious deadline due and I cannot afford this setback.
Thanks in advance!!!

OK....I got it working again. Pay attention to what you do in the Environment kids!!! But new problem...My arpeggiator won't arpeggiate. Any solutions?

Similar Messages

Ich nutze Logic Pro um Midi-Files zu bearbeiten. Unbearbeitete Midi-Files werden von Qmidi mit deutschen Buchstaben ä, ö, ü, ß wiedergegeben. Sobald ich das midi-file mit logic-Pro bearbeitet habe werden die Buchstaben nicht korrekt wiedergegeben

Ich nutze Logic Pro um Midi-Files zu bearbeiten. Unbearbeitete Midi-Files werden von Qmidi mit deutschen Buchstaben ä, ö, ü, ß wiedergegeben. Sobald ich das midi-file mit logic-Pro bearbeitet habe werden die Buchstaben nicht korrekt wiedergegeben. Dies passiert auch, wenn ich keine Änderungen im Midi-File vorgenommen habe. Bei Qmidi kann ich die Schriftarten / Einstellung " Western ( ISO Latin 1 ) " eingeben und diese Buchstaben werden korrekt erkannt. Es muss daran liegen, was Logic Pro aus dem Midi-File macht.
vielen Dank für Eure Hilfe im voraus
I use Logic Pro to edit midi files. Unprocessed Midi-Files reproduced from the programm "Qmidi" with German letters ä, ö, ü ß. Once I have edited the midi-file with logic-Pro are not correctly play back the letters. This also happens when I have not made any changes in the midi file. In Qmidi I can the font / setting "Western (ISO Latin 1)" and enter these characters are correctly recognized. It must be because what makes Logic Pro from the midi file.
Thank you for your help in advance

That's clearly a bug. Please send this to Apple using their feedback form:
http://www.apple.com/feedback/logic-pro.html
Best,
DaCaptain

Caps lock won't turn off

My updated 3G iPhone keyboard is slower and caps lock won't turn off after turning on with a double tap. If I switch to numerals or special characters when I go back to main keyboard caps lock is off. Anyone having the same issues or any solutions?

Please read teh directions for an SMC reset:
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Logic Pro 9 Midi Problems Multiple Devices

Hello, im having issues with using multiple external devices in Logic Pro 9. I have a virus TI 2 and a prophet hooked up to a Saffire Pro 40 audio card which I am using the Midi Hub.
Basically, If I have an external instrument (prophet) playing on a track I have to turn the virus off or else there is midi problems communicating with the prophet 08.
The Biggest issue i'm having here is that when the midi data in the external instrument track is playing, if I'm selected on the track while its playing, I get an extreme cluster #$)* of midi on the midi input display and it completely and utterly destroys what the prophet is trying to play into logic.
In my Midi setup on Mac Snow Leopard, I have the ins and outs of the prophet going to the saffire pro 40. The virus is connected and playing midi via USB.
Anyone know how I should be setting this up so the midi information is not getting messed up? Yes, I have consulted the user manuals.

Not: My ZED R Mixer connected FireWire 400 800 cable with iMac

Help Logic Pro X deleting controller setup

how do i delete in Logic Pro X a mixer setup?
i chose by mistake a wrong controller out now i cant delete it and when i want to put the right one in it says the controller is already in the list.
Right Click > Delete... Doesnt Work
Please Help

LPX resides after instal in the Application folder and should also be available in the Dock. If this is not the case then something has gone wrong during the download, you'll have to try again or contact Apple if the problem persists!
Have a nice day!

Logic Pro X midi keyboard (EXS24 help)

So im new to logic (December 2013) and have been using it to make some hip hop beats. I use a akai mpk25 keyboard with logic pro x. I have been using the EXS24 sampler a lot in my production. I have saved many sampler instrumentals with different kicks, snares, percussion etc. And for the longest time the left most key on my mpk was C2 inside of logic. And all my exs instruments started with C2 and worked its way down so every key played a different sound. Now randomly, dont know what I did but its saying that leftmost key is C1 and when i hit the keys on the left side of my keyboard no sounds come out until i get to about the middle of the keyboard where the new C2 is..... Probably an easy fix but i dont know Im a rookie lol. Only like half the sounds will play in all my sampler instruments and i would appreciate some help. thanks

While it could be Logic, have you checked your keyboard manual and see if you accidently hi the transpose buttone or octave change button. I would look there first

Logic Pro X additional content will download but won't install

Hi,
I have Logic Pro X (10.0.1) installed on my 2012 Macbook Pro i7 2.6Ghz 8Gb Ram. I am able download the addition content but now just hangs & it has only installed the producer patches, surrond reverbs, garage band 11 sounds & instruments & the jam packs which I believe were there from my Logic Pro 9.
I have read support forum threads where peiople have downloaded it in smaller sections 1 or 2GB at a time with success, I have tried this & in smaller sections with no success.....it just still hangs saying "installing Orchestra" or whatever section I'm trying to install.
Can anyone help?
I went through **** to install the program itself as the initial installion just hung too on the "Essential Sounds and Instruments for Logic Pro & Mainstage", I finally installed after getting the content download link from a support thread.
Apple support is s***, I emailed about them about the download (after spending my £139.99) only to wait 24 hours for them to say delete it & try again (like we wouldn't have though of & done that already). After repling to say that & waiting another 24 hours they said here is an email address to our Tech support or a premium number to call WFT!!!!
Now the additional content won't install, between my Macbook Pro & Logic Pro X the money I've spent - Apple are taking the ****.
Please can some one help?
Thanks

Install on my Core2Duo 17" MacBook Pro went flawlessly, but install on my 8 Core Mac Pro suffered this problem. Many thanks for the solution Don, it worked for me ;-)
I am trying hard to supress an ironic chuckle though, reading other posts in this thread .... suggesting that people should call Apple Tech Support and expressing incredulity that people weren't doing this as their first option.
Well I can say say that after several calls to Apple Tech Support, amounting to several hours on the phone, and well over an hour on the phone with them today, I was informed that this problem is a known bug, and that Apple are working on a solution. They couldn't tell me what the bug is, what machines are affected, or what else might trigger it, or when a bug release might be due.
Their troubleshooting steps basically involved various reboots, repairing disc permissions, reseting the user home directory via terminal, booting up in recovery mode (but not safe mode as per this solution) trashing various preferences files, and, as a final step, uninstalling and reinstalling from scratch.
Only when all that failed was I told that there is a known bug that Apple are working on.
I came here to see what the community was saying, as the Tech Support guy did say there was likely to be some info on the forums. Lo and behold, a solution is posted and it works.
Why are Apple's Tech Support (in the UK at least) not aware of this?
Oh well, at least I'm up and running on my Mac Pro now.
Thanks again Don,
Cheers,
Nigel

Cap Lock won't work

Hello,
I try double clicking on the upper case button as shown in the iPhone introduction video to lock caps, but it doesn't work.
Any ideas?
Thanks

Go to Settings > General > Keyboard.
Turn Enable Caps Lock 'On'

Wired keyboard issues-caps lock won't turn off and other keys do not type

I sat down today to use my May, 2010 iMac. Fully up to date with Lion.
I am using a WIRED keyboard.
The caps lock key is permanently on and the remaining keys when pressed do nothing. They do not work. You can press the keys down but they don't type any letters or symbols of any kind.
I cannot log in because I can't type my password as the keys don't work.
I can't do a PRAM reset because the P and R keys and others don't work.
I don't know what an SMC reset is but I can't do that either because the keys don't work.
Why would a keyboard stop functioning? Yesterday, it was just fine. Now it doesn't work.
What causes the caps lock key to stay on?
I have unplugged the keyboard etc, but nothing changed.
Doesn't anyone know how to correct this problem? Do I just need to buy a new keyboard?
I called Apple but they were closed.

Please read teh directions for an SMC reset:
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Caps Lock Won't Disengage - Cannot Enter Admin Password

I was using email when my Caps lock key would not longer disengage. Believing that I had hit a combination of keys that had somehow bypassed the caps lock key and locked caps, I restarted.
Restart was slow and included a grey bar scale on the bottom of the boot screen that I have not seen before.
After restart, the log on screen came up in 'Safe Boot' mode.
My password is an all lower case sequence and my caps key is still locked on restart (reboot now?)
I can't enter my password.
What can I do?
What happened?

The 'shift' key was physically stuck. I was unprepared for this as I never eat or drink at the computer. But, it seems to have something in there regardless.

Caps lock won't work!

Does anyone experience the same?
My caps-lock function does not work.
It is correctly enabled in Settings. Everytime I double-click the Shift button, the key becomes blue-filled but still after the first letter it goes back to white (and no more capital letter).
I have to manually hold down the shift button for all the time I need it.
This as been the same also before the iOs update.
Any idea or advice?
Thanks,
F

Have you tried a hard reset as Jonathan suggested: hold both the sleep/power and home buttons until the logo appears and the system resets?
This sounds like a unit problem and not iOS 4.2 problem since you said it existed prior to the iOS update. If it persists after hard reset, it would be good to take the iPad to an Apple Retail store and have the genius bar staff check it out.

Logic Pro 8 mutes newly recorded tracks and won't play back until reload...

Seems like this has happened within the last couple of months. When I record audio in Logic and try to play it back, it won't play the audio. The arrange window shows it is there and the regions do NOT show that they are muted (nor does the channel strip). In essence, it acts as if it is muted, but there are no signs that it is. (I even select the regions and mute then unmute them, and mute and unmute the channel strip, but nothing changes. Still no audio.)
So I have to close the project and reopen it. When I reopen it, every region in the previous recording session (audio) is greyed out (muted) in the arrange window. Once I select them and unmute them, they play back perfectly.
This is a very weird situation. Anybody have any ideas about what the issue is?
Thank you!

A lot of people have reported this, and it happens to me pretty frequently. Gotta be a known bug, but of course since Apple is always mum about this stuff with absolutely no communication to its customers, we won't know until the next version of Logic is released.

Logic Pro X: Midi takes do not play

When I record a few midi takes with looping on and set to "create tracks and mute when cycling", I can only play back the first take. Subsequent takes are greyed out, silent, and nothing I do seems to make any difference. You can see in the screen cap, the top track (green) plays, but even if I click on the other tracks or the clips themselves below, I can't get them to play. Can anyone help please? Thanks - TJ

Thanks CCT: New to Logic I'd forgotten that there are two ways to mute (other than the mute button). There reason I chose the mute option is so I can make a bunch of attempts to record a section and not hear each loop while I record (I guess that's the best way?). I usually build up midi note by note on the piano roll, so this is something new for me. I thought mute would be a temporary thing that Logic did only while recording. Anyway, thanks! this solved my problem.

When I am using Logic Pro my midi keyboard is touch sensitive.

How do i get it to play the same pressure throughout?
As in, no matter how hard i touch the midi keyboard note i wish logic to record the same note pressure all the time.
Thanks

OK, you've actually not clarified it. It is still unclear if you mean velocity or aftertouch (aka pressure)
Velocity is how quick/forceful you play a key. You seem to mean this, judging from your second sentence.
Aftertouch (aka Channel Pressure, or, rarer, Polyphonic Pressure)* is the force with which you HOLD the keys down (that's why it is called after-touch). If you mean velocity, then my guide will do what you ask. Have you tried it?
* Most cheaper MIDI controllers and synths don't have aftertouch, and only some top enders have polyphonic aftertouch (=every key with individual AT-sensor)
http://www.harmonycentral.com/t5/Keys-Synths-amp-Samplers/keyboards-with-Poly-Af tertouch/td-p/310574

Why doesn't Logic Pro X remember controller assignments when I switch patches?

I'm trying to work with setting up External Controller Assignments with my Akai MPK25. I'd like to have Knob 1 map to the 1st Automatic Smart Control knob I can see (like Timbre or Cutoff or whichever is leftmost) OR have Knob 1 always map to the same paramater (Timbre, Cutoff, etc).
I'm able to successfully set them up on a single patch but the moment I switch to a different patch, Logic completely forgets the assignments. And if then I switch back to the original patch, the assignments are also ost. If I toggle "Compare" in the Automatic Smart Controls window back and forth, Logic loses the assignments. But oddly, it remembers one or two (out of eight potential paramater assignments).
How do I get Logic to remember these assignments?
Here's a screenshot of my window: https://www.dropbox.com/s/uqzqen6etkh0uxf/Screen%20Shot%202013-11-24%20at%205.02 .43%20PM.png
Thanks so much in advance.

No, no need to chase any pur.
You can clickhold that No Output slot and assign an output.
...but for that to work you need to have chosen your audio hardware in the preferences, of course. And while you're at it, make sure you also have all Advanced Tools enabled.

Logic Pro 8 midi controller or caps lock won't process midi

Similar Messages

Maybe you are looking for