Logical component cannot be used in project

HI
after i add logical component in solar_project_admin
i try to check system landscape
and i get error "Logical component SAP_ERP_EHP_ABAP_EHP4 is not used in project (the name of the project)"
i used in 2 different logical component in this project
you now whay?
best regards
Naor

I am receiving this message right now, while conducting prototype testing.
Message no. SOLAR_SPROJECT055 - Logical component Z_CHARM_PT is not used in project CHARM_PT01
I used this logical component in a previous solman project and it worked. Now I have closed that project and am trying to create a new one using the same logical component.
Any help or suggestions are appreciated. Thanks.

Similar Messages

Job Mgmt : error "This component cannot be used" when sending job request

Hi,
When i try to create a job request (basic job request link from the Job Management Workcenter), I am having an error : "This component cannot be used".
It seems the component is the number read from the ibase corresponding to the client and the sid. There seems to be ne problem on this side.
But everything is correctly setup regarding Ibases and components.
What's more when trying to create a ZLFJ (duplicated from SLFJ) in CRMD_ORDER, there is no problem.
Any suggestion where it could come from ?

Hello Hervé ,
could you please provide me with some more information?
When exactly do you get the message? When trying to submit the job request? Or when clicking on the link "Create Job Request" in the workcenter?
If you get the message when submitting, please provide more information on the entered System (IBase). Maybe a screenshot could help.
Best regards,
Jonny

Logical component in SolMan using SMSY

Hi,
What is a logical component and why is it necessary. Why do we create that in our solman system for the landscape.
Also i was going through one tutor in rkt-solman link for creating logical component. It shows for a r/3 system. Is the same selection valid for the Netweaver component also.
Help required and shall be appreciated as well.

Hi,
First of all thanks for the reply.
One thing is while i create a new system with assistant, and select the product as netweaver and proceed it asks me to select the main instance. What is this main instance. Say for me the system i am adding is the one having J2ee engine and portal plus trex on it. It doesnot have the ABAP instance. So what should be my selection. Should it be only WebAS Java or java + portal + trex.
Secondly what i did was i selected java and EP and Trex and proceeded. It didn't give me the option of entering the System Number and Message Server. In the next screen the only option i had was to assign logical component. If i select the box then it asks for client but the box for client is disabled.
Don't know what to do. Also RFC anyway is required. In such a case what should be the case. How should i create those RFC's and what RFC's are required for the same.
Lot of questions. Hope to get the detailed reply.
Answers will be rewarded nicely.
Thanks

Replace logical component in solar01

Hi,
We have an issue with Logical component maintained in "transaction" tab for business process under Project in solar01.
Logical components for ERP systems have been changed from SAP ECC to SAP ERP. All ERP systems are now maintained in SAP ERP and corresponding Logical component. But the business processes mainatained refer logical component SAP ECC.
We tried to replace and delete the logical components in solar_project_admin -> System Landscape but it does not allow to delete neither replace with new SAP ERP logical components.
Get message "Logical component SAP ECC is still being used"
Please help on solution.
Thanks & Regards,
Anthony.

Thanks for reply.
actually we tried to add new SAP ERP logical component and updated in the project.
When we try to use Logical Component replace function we get below message :
"The logical components SAP ECC and Z_ERP have different products"
So the logical component in "transaction" tab still cannot be replaced.
Moreover in few business process it does not list Z_ERP logical component to manually replace same in Logical component dropdown.
we found one SAP note :
SAP Note 1429697 - SMSY: Converting product versions
this SAP note refers to a report SMSY_SWITCH_PRODUCT which can be used to switch logical componment SAP ECC to SAP ERP.
But SAP ECC is used in atleast 15 more projects so need to know impact of running this report.,
Thanks & Regards,
Anthony

Which SAP Product version to assign to a Logical Component in SMSY (SOLMAN)

Dear SAP Colleagues,
In our SAP environment, we do have 2 versions of ERP systems :
1. CON - SIF - CDP systems are 'SAP ERP Central Component 5.0' product version.
2. CDD - CDT - CDP systems are 'SAP ECC 6.0' product version.
Question :
When I want to assign these systems to a Z_LOGICAL_COMPONENTS, which product version do I have to choose ?
Example for CON - SIF - CDP systems :
1. They are 'SAP ERP Central Component 5.0' product version.
2. In SMSY in our SOLMAN system, logical component are created using
'SAP ECC 5.0' product version.
Example for CDD - CDT - CDP systems :
1. They are 'SAP ECC 6.0' product version.
2. In SMSY in our SOLMAN system, logical component are created using
'SAP ECC 6.0' product version.
Question :
What about 'SAP ERP 2004' and 'SAP ERP 6.0' product version ?
In which case must I use this product version to assign CON-SIF-CPS
or CDD-CDT-CDP to new Logical components ?
Are they OSS Note or any matrix which give me the right product version to choose ?
I have heard that 'SAP ECC x.x' product version should not used any longer ?
Thanks
Best regards
P.C

Hi,
Read the following document, the mapping for systems and component versions is described in here:
https://websmp202.sap-ag.de/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf
For ECC 6.0 you should select ERP 6.0
regards,
Jaap

Logical Component after upgrade

Hi,
I have slight confusion.
We upgraded our SCM system from SCM 7.0 to SCM 7.01 (Ehp1). now our product version is "EHP1 FOR SAP SCM 7.0"
and Product instance is "SAP SCM ENHANCE PACKAGE"
in logical component which is used in Charm and monitoring.
following are the current details
logical componenet: Z_SCM
Product/Prod. Instance SAP SCM [SCM Server]
product version: SAP SCM 7.0
Now i want the correct assignment of logical component which includes product version and product instance.
How do I get same logical component name with new product instance, so that my charm and monitoring is not affected.
Its same case for PI. from SAP netweaver PI(7.11) to SAP Netweaver (7.3)
BR,
Shyam

Hello Shyam,
Sorry, you are correct, the logical template needs to be copied from a system group and SAP SCM 7.0 and SAP SCM 7.0 EHP
are in different system groups, and you won't be able to pick up your SCM 7.0 systems in the SCM 7.0 EHP logical.
What might be possible, and I don't know if it would be practical is to retire Logical Z_SCM that was based on SCM 7.0, and by retire I mean remove, and then create the same nameed Logical Z_SCM but copied from the template of SCM 7.0 EHP, then you could see your SCM 7.0 EHP systems and pull them into the new logical Z_SCM and add that back to the solution.
I have not tried this, but if you have a test environment you could try this to see. Logically it should work. Its certainly something you could prove or disprove on a test system.
Regards,
Paul

Error: The logical component X is still being used

Hi,
In Transaction SMSY, i want to delete a Logical Component. So, pre-condition is to check whether it is mapped to any Projects/Solutions. By right-clicking - Where used list , i have seen that it is mapped to a Project. So, in transaction SOLAR_PROJECT_ADMIN under tab System Landscape, i tried to delete the Logical Component but receiving the error message - The logical component X is still being used.
Please help.
Many Thanks,
Mohan.

Hello Mohan,
You can also solve this by using the "Replace Logical Component" button in the system landscape within SOLAR_PROJECT_ADMIN.
Thus you can replace all the occurances of the Z_ logical component by e.g. an existing standard SAP logical component.
Afterwards you will be able to delete your Z_ logical component in SMSY (or in LMDB from 7.1 SP9 on).
Best regards,
Peter

Remote control using DCOM: Error: "ActiveX component cannot be created."

Hello,
I want to address a OMICRON CPC100 device via remote control. I have a dll ("TESTCONTROL.dll"), which provides methods to control the CPC100. In order to encapsulate this functionality, I've written a VB.NET-dll ("CLC_CL_for_Net.dll") (it's a class-dll) which calls methods of TESTCONTROL.dll. Now I want to use CLC_CL_for_Net.dll in LabVIEW.
Here's the code of CLC_CL_for_Net.dll:
Imports TESTCONTROLLib
Namespace MyCPCNamespace
    Public Class CPCClass
        Public Sub New()
        End Sub
        Public Sub testfunction(ByVal ipaddress As String)
            Dim tc As TestProcedure
            Dim atm As IATMTest
            tc = CreateObject("TestControl.TestProcedure", ipaddress)   '<-- here the error occurs!
            atm = CreateObject("TestControl.ATMTest", ipaddress)
            atm.Activate(300, 10, 1)
            atm.Deactivate()
        End Sub
    End Class
End Namespace
In order to enable DCOM on my computer, I did the following:
- I switched the firewall off.
- I started "dcomcnfg.exe", chose "Component Services/Computers/My Computer -> Properties" and checked the checkbox "Enable Distributed COM on this computer".
- I also chose the tab "My Computer Properties/COM Security" and allowed everyone full access and launch
permissions.
- I created an exe-file from my LabVIEW VI, which uses the dll, with the help of the LabVIEW Application Builder.
For this exe-file and also for the TESTCONTROL, I set the authentication level to "None".
For test purposes, I used my dll in a C++ project. There everything works fine. However, when I try to use the dll
in LabVIEW (using LabVIEW's .NET constructor node and method node, which you can find under Connectivity -> .NET), the program fails at the line "tc = CreateObject("TestControl.TestProcedure", ipAddress)".
Here the error message displayed by LabVIEW (I translated it from German into English):
"Error 1172 has occurred at Error calling method CLC_CL_for_Net.MyCPCNamespace.CPCClass.testfunction of ObjectId
handle: 0x2BB117C for obj 0x3F19E1D[CLC_CL_for_Net.MyCPCNamespace.CPCClass] in domain [LabVIEW Domain for Run] and
thread 3792, (System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.Exception: The ActiveX component cannot be created.
) in CPC100_RemoteControlVI.vi"
As the dll works when I use it in the C++ project, I don't understand why this error occurs when I use the dll in
LabVIEW. Do I have to give LabVIEW any special permissions?
Can anyone help me to solve this problem? Thanks a lot for your efforts!
Regards,
Matthias

Hi Matthias,
I am not really familiar with .NET assemblies but I found couple informations on your error :
First of all, about the Error 1172 in LabVIEW, there is two things to proof:
Ensure that the .NET assemblies that you are using are saved in the root directory of the top-level VI.
Add the .NET assembly as a reference in LabVIEW by selecting Tools»Advanced»NET Assembly References. Click the Add button and navigate to the location of all the assemblies that you want to call.
Those two steps sometimes solve Error 1172 related problems. I also found some information about the "ActiveX component cannot be created" error. A .Net Class library needs to be in a COM wrapper in order for it to be called through COM methods, such as ActiveX. The way to do so is:
1. Create a new .NET Class Library project.
2. Remove the Class1.vb that is created.
3. Click Add Class on your project.
4. Choose "COM Class", and add it.
5. Add at least 1 function or sub in it.
6. Compile it, and Visual Studio should registrer it automaticly.
If you whish to manuall reg it, or create a registry entry file, use "RegAsm.exe" in the .NET Framework folder.
I hope this could be any helpful to you
Regards
Florian Abry
Application Engineer Group Leader
NI Germany

How To create a maintenance project - logical component missing?

Hi experts,
we plan to activate ChaRM in our Landscape.
We don't have created a maintenance project in solution_manager cause there is a logical component missing.
I followed the instructions of the tutorial on https://websmp206.sap-ag.de/~sapidb/011000358700006932702005E.sim (Creation of a maintenance project).
I recognized there is the logical component "ZCHANGE REQUEST MANAGEMENT" missing.
This seems to be a modified origin SAP Component.
Does anyone know where to find these component?
Maybe with informations what has to be changed for the Z*copy or is this only a 1:1 copy?
Does anyone have a detailed document for configuring ChaRM on SolMan 7.0 (Mailadress is visible on my business card)
thanks in advance
kind regards
Thomas
Helpful answers/documents will be rewarded, surely!

You need to set up your solution and therefor define a logical component in SMSY. For instance the logical component might consist of your ERP E, Q and P systems.
This logical component is added to an SMI Project. It basically tells the SMI project which systems are involved in the process. After that you will have to create an IMG project, CTS project, release the SMI project to the Change Request Management and generate Maintenance Cycle and Task List (this is all being done in SOLAR_PROJECT_ADMIN).
/cheers

Z logical component not visible in project administration

Hi All,
I have created new product in SMSY named ZLegacy and assigned logical component.
But when I try to assign this logical component to my project, I dont see the Zproduct. Is there any table which I need to change manually ?
BR,
Shyam

This forum is for the Flex SDK. The Flash Builder (formerly Flex Builder) IDE has its own dedicated forum. Questions specific to the IDE should be directed there.

Logical Component Assignment : Use '_' as a separator

Hi experts,
I can not assign a system to a logical component in SMSY.
I tried to assign an SRM 7 system to logical component : "SAP SRM EBP-SRM SERVER" and then I get error message : "Use '_' as a separator".
Any idea to sort this out?
Where could I manage logical component name?
Many thanks in advance.

Hello there,
Does the logical component you mention have any systems already assigned? I would guess that it doesn't and that it is one of the logical components already present when Solution Manager is installed.
Have you tried creating a new logical component?
Best regards,
Miguel Ariñ

I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture. I cannot get it to project my school work that I need to teach my students.

I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture. I cannot get it to project my school work that I need to teach my students. Help!

Hi Becki514,
Welcome to the Support Communities!
The following articles may help you with your projector issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
I hope this information helps ....
Have a great day!
- Judy

Replace logical component in Solution_directory

Hi
We have imported a project to Solution that used the logical component "ERP".
The second proect was imported with its logical component "ERP2".
This has turned out to be a wrong approach, and we want to replace the ERP2 component with "ERP".
Does anyone know if this can be done without checking our productive solution out to the maintenance project and doing it here?
I have tried, in the Solution to say "replace logical component", but apparently I cannot replace it with a component that is already in the Solution.
Anyone???
Kind regards
Anja

Hi Anja,
if you have activated "Check-out/Check-in", it is not possible to replace the logical component in the solution, because it is only available in display mode. If it is possible for you to switch Check-out/Check-in" temporarily off, you can do the replacement via the menu "Edit --> Replace log. Comp...".
Best regards,
Michael

How to delete logical component

How to delete logical component in solution manger 4.0
Am deleting one system eatery in landscape components that time giving one warning?
Is there any option for deleting logical components?
Please give any solution for deleting system& logical components
Warning is
(Delete a system despite use
   You want to delete the system PRD, but it is still being used.
   You cannot delete the system as long as it is still used in logical
   Components. The where-used list tells you the logical components which
   Use the system. To delete the system, remove it from all logical
   Components first.
   You can only delete the system if it is used in system groups. The
   Where-used list tells you which system groups use the system.
   Warning
   If you delete the system despite use in system groups, you can no longer
   Access it in applications (e.g. in the Project Administration, if it is
   Used in a system group of type Project Landscape).

Dear Kiran,
Firstly find out where the system PRD has been added as an Logical System in an Logical Component. Remove the assignment and you should be able to delete the System.
Similarly for deleting an Logical component find out which solutions are referring to the logical component and deassign the Logical Component from the Solutions. You can then safely delete the Logical Components.
You can use the Where Used List button which looks like 3 arrow starting from an single point to different directions to find out the assignments.
Hope that this helps .
Regards
Amit

Monitoring "check aborted jobs" not possible - Logical component issue?

Hy Experts,
we are facing a problem setting up system monitoring in our Solution Manger system.
We want to check if a specified job is finished sucessfully - if it is aborted we want to receive a mail.
In another system the monitoring as described is fully functional.
In this scenario we are facing a problem:
Error Text:
The logical components SAP NW REDWOOD CRONACLE and Z_SYS_MONI have different products
Message no. SOLAR170
Diagnosis
This component change can prevent the processes and scenarios which you have copied from the BPR into the "Structure" tab, in transaction SOLAR01, from running in the assigned system, or assigned transactions, IMG activities, etc. may not exist in these systems. For example, transactions or IMG assignments copied into the previous product context do not yet exist in the project.
If the same systems are assigned to the new and old logical components, the change is not critical.
System Response
The system sends a warning and accepts the change, but no data is automatically converted or adjusted.
Procedure
If you are unsure whether your assignments will still be in the component systems after the component change, perform the function "Environment - Refresh Buffer" in the transaction SOLAR01. Errors in this program are objects which do not exist in the system.
Actual product of the logical component "Z_SYS_MONI" is ECC5.0.
The other (working) is using the logical component "SAP NETWEAVER APPLICATION SERV" instead of the above used "SAP NW REDWOOD CRONACLE "
How can this error be fixed OR
How to monitor jobs with logical component ecc5.0?
Any help will be rewarded!!!
Thanks in advance
Tom

Detailed Info:
The working solution is assigned to ECC 6.0 AND to SAP Netweaver 7.0 (2004s).
The selection in business process repository - it-platform - monitoring is assigned to SAP Netweaver 7.0. - but we have ECC5.0 - even if I create the system/logical component new under Netweaver 2004 (6.40) it won't work
It seems not to be possible.
But how to monitor a job in ECC5.0 - think it is possible.
Any ideas?
Please help!
OK
Seems not to be possible!
Set to solved - but this is not the way to solve problems dear SAP
Edited by: Tom on Dec 5, 2008 9:59 AM

Logical component cannot be used in project

Similar Messages

Maybe you are looking for