Logical System is not defined in table SMOF_ERPSH!

Hi,
When i am replicating a material group to SRM system, in SMQ2, the error message appears as 'Logical System is not defined in table SMOF_ERPSH!'.
can any one please let me know why this comes up, i have checked the SMOEAC settings, its fine and the logical system entries are already present in the tabe

Hi,
Can you verify all your settings as per note 720819?
Also under SMOEAC transaction, site attributes for your site type 'CRM' may not have any value. Please define attributes for your SRM RFC destination. Select the correct RFC destination, then click on button 'Get Values'.After doing this, table SMOF_ERPSH should be populated correctly.
Regards,
Nikhil

Similar Messages

Logical system not defined in table SMOF_ERPSH!

Hello,
In the inbound queue of CRM, the queues are in 'SYSFAIL' status. The error message is ' logical system not defined in table SMOF_ERPSH!' .
the table has an entry for relevant ERP system.
I dont know where else to check.
I have checked the logical destinations on CRM and it is defined correctly.
can anyone help me here.
Regards,
Pratima

Hi Pratima,
I am also facing the same issue. I checked all the entries and Entries are there in the respective tables but still the same issue.
But if I delete the queue, the changes are replicated for that time but after some time again the queues are getting blocked with the same issue.
Pratima, can you please tell you whether your issue got fixed on this.
Thanks,
Sharath.

Logical System is Not Defined in EBP...

Hi SAP GURU's,
Please do Accept My Thanks for Kind Help
Rendered So far ..
My issue is whie working wih Accoutn Assignment is EBP ,I Tried to Maintain Logical System ..But system is throwing Error Massage Logical System is Not Defined in EBP..
Where as it was Defined and Assigned to the Client
in the Configuration ...
The Same thing has been defined in R/3 also ...
what Could be the Reason..? ? ?
Could Any Gentleman through Some light on this
Suitable Points Assigned for the Right Answer
Thansk in Advance
Adarsh

Hi,
Pl define the same logical system names in the Define Back end systems or in the Table
bbp_backend_dest.
Thanks & Regards,
Nagarajan

Error: Local logical system is not defined

Hello
Our scenario is File-XI-IDOC , wherein we connect to SAP R/3 Development server for posting IDOCs
Now , we need to connect to SAP R/3 Quality server for posting the same IDOCs.
However, recently, the Quality system database was refreshed with production data completely Hence all the ALE configuration data in Quality tables got erased, due to which we are not able to send IDOCs to Quality
Now, we proceeded as follows :
1. We set up Logical System in Quality
2. We entered the partner profiles too
However when we goto transaction 'BD64' , it gives error as "Local logical system is not defined"
Hence we had to redistribute the profile from the sender system, and IDOC started being posted correctly
But, we need to know, why cannot we execute 'BD64' in Quality itself and also, will this have any impact on our IDOC posting
Further, if Quality is refreshed every now and then, do we need to repeat the above process each time or some other way is available to restore the ALE configuration data automatically
Regards

Hi Naveed,
i made the following settings:
SCC4: new entries created
100     Sending System
200     Receiving System
SM59: new ABAP type 3 connections:
RFC_DEST_LS_100
RFC_DEST_LS_200
- Tab Logon & Security Logon user: current user (bcuser client 001)
Connection test is successful
- Technical Settings: target host: localhost
SALE: new logical systems created
LS_100
LS_200
SCC4:
double click on 100 Sending System   configured with logical system LS_100
double click on 200 Receiving System configured with logical system LS_200
kind regards
Andreas

Local logical system is not defined when tried to create new maint. trx.

Dear Experts,
I encountered this message "Local logical system is not defined" when I tried to create new maintenance transaction in DWSP (at Maintenance Optimizer of Solution Manager).
This message kept on appeared even though I've created and assigned the logical system at SALE.
Does anyone know what went wrong?
regards,
Abraham

Hi
there are workarround suggested to solve this problem
login to your solman system, go to the table T000 and update the logical system name in the field LOGSYS
this vanish the error message.Please try.
Thanks,
Jansi

Post installation error "Local logical system is not defined"

Hello everyone,
I freshly installed the latest SAP NetWeaver 7.01 ABAP Trial from scratch and like to configure ALE.
I followed thew steps of http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf
(ALE Quick Start) but cannot get through the following step on page 12:
From the R/3 Implementation Guide screen in TA SALE
choose Basis
    Application Link Enabling (ALE)
      Modeling and Implementing Business Processes
        Maintain Distribution Model and Distribute Views
Clicking on Maintain Distribution Model or using TA BD87, I immedeately get the following error:
The initialization of the logical system has failed.
With TA BD64 the error: Local logical system is not defined arises. I also looked at
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi,
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1 and
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide describing the same actions
to find an explanation, but without success
I assume, the error does not occur because the trial version does not support it, but
because of other post installation activities that must be done.
I already created two logical systems and assigned them to newly created clients 100 and 200,
but this did not have any impact on BD87 and BD64 as i was hoping.
Does somebody know what to do here?
Thanks in advance and kind regards,
Andreas

Hi Naveed,
i made the following settings:
SCC4: new entries created
100     Sending System
200     Receiving System
SM59: new ABAP type 3 connections:
RFC_DEST_LS_100
RFC_DEST_LS_200
- Tab Logon & Security Logon user: current user (bcuser client 001)
Connection test is successful
- Technical Settings: target host: localhost
SALE: new logical systems created
LS_100
LS_200
SCC4:
double click on 100 Sending System   configured with logical system LS_100
double click on 200 Receiving System configured with logical system LS_200
kind regards
Andreas

Maintenance Optimizer "local logical system is not defined"

hello, i would like to create a new maintenance transaction to upgrade from SAP ERP 6.0 to SAP ERP 6.0 Enhanced Package 4 i follow the steps in the "maintenance optimizer configuration guide" BUT when i click to create a new maintenance transaction i faced an error told me "local logical system is not defined"!!! so how i can define Local logical system?
thanks in advance
Amr M. Abdelazeez
Mobile: 002 011 40 85 200
Linked In: http://eg.linkedin.com/in/amrabdelazeez/
Alexandria, Egypt

This should be configuration issue, please check the description in the Implementation Guide (tr: SPRO) at following point:
SAP Solution Manager
- Basic Settings
   SAP Solution Manager System
    General Settings
     Maintain Logical Systems
After having maintained the logical systems, the error should not be displayed any longer.

Error : Logical System is not defined

Hi Experts,
I have installed SAP CRM 7.0 IDES . But when i am trying to exectute Transaction Code /nbp ( Business Partner Creation) system is giving an error 'Logical System is not defined ' and i am not able to execute the transaction.
Kindly explain how to define the logical system.
Regards,
Rohit Tripathi

Hello Rohit,
To solve the problem you should proceed as described in the long text of the error message B2 001 and maintain the logical system for the current client via transaction SCC4.
The reason for this error is that the ALE outbound of business partner is activated. If you don't want the ALE messages to be generated when business partner is changed then you can disable the ALE outbound. To do that, go the maintenance view CRMC_BUT_CALL_FU and disable the following function modules if active:
BUPA_OUTBOUND_REL
BUPA_OUTBOUND_ALE_REL
I hope this could be helpful.
Best regards,
Maggie

Local logical system is not defined at BP crwation - How solve it ?

Hello,
when creatin a business partner the following message is showed:
Local logical system is not defined
I add the system by BD54, but the problem is not solved. Any idea ?
Tks a lot,

HI,
Try to attach the logical system to client and see..Use tcode->SCC4 for this.
Regards,
Nagaraj

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

Local logical system is not defined

Hello
We are trying to setup a logical system - created or defined the logical system
when we try the BD64 it gives out the error "Local Logical system not defined"
I am using ECC 6 version
IS there any way to bypass and do the setup ?

HI Anil,
Best Methodology for creating a RFC Destination that also includes setting up Logical System is:
Use Transaction -> SALE /b]
1) Define Logical system :
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Logical System -> Define Logical System

2) Assign Client to Logical system:
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Logical System -> Assign Logical System to Client
3) Create RFC Destination: T-CODE (SM59)
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Communication -> Create Rfc Connection
Follow steps in sequence. Hope it answers every thing.
Cheers,
*RAJ*
*POINTS IF FOUND HELPFULL*

Get message: local logical system is not defined - in trans. vl01n

Hi experts,
i got this message after i saving data in trans. vl01n.
what should i do to not see this message after i save data in this transaction?
thanks,
dana.

Hi,
Check the logical system definitons in transaction
and can assign the logical system to teh client in SCC4 transaction.
Rgds,
Sandeep

B2 001: Local logical system is not defined

Experts,
I am new to SAP Installation.
I have created Purchase Orders in a newly installed IDES 6.0
It does not appear on the system immediately after saving. I had to go to SM13 to repeat updates before it can appear in ME23N.
I have even gone to SCC4 to edit the client settings to allow changes automatically. I still cannot see an improvement.
Is there anything I am doing wrong?
Do I need to reboot the server?
I posted this in NetWeaver Forum but was told it is the wrong forum.

Garapati,
Read SAP online help at
http://help.sap.com/erp2005_ehp_06/helpdata/EN/aa/b4b13b00ae793be10000000a11402f/frameset.htm
I also suggest that you read the notes cited by expert Jürgen.
Best Regards,
DB49

Logical system has not been assigned to any business grp

We have converted R/3 system (4.6c) from EBCDIC to ASCII. R/3 is integrated with SCM 5.0. Everything was fine before conversion. After Conversion, in SCM qRFC Monitor Inbound Queue (TCODE = SMQ2), we are getting the
error "Logical system &##ä<+è### has not been assigned to any business
system gr".
Error Message no. SR053
The problem happens because the logical system has strange value
in the inbound queues.
Preblem still persists even after performing various things:
Re-created and Activated the CIF Integration Models
Checked all settings in both systems
Ran CCR
Checked table CIFLOOKU
Any ideas are highly appreciated? Thanks

thanks。 I have the same issues. like this:
Logical system I11CLNT800 has not been assigned to any business system group
Message no. /SAPAPO/CIF007
System Response
The data cannot be assigned to a logical system.
Procedure
Check if the logical system has been maintained, and assign the logical system to the business system group.
the I11CLNT800 is my ECC logic system. I had assigned it to ECC Client 800,and a BSG I11800 in APO system.
Can u give me any suggestions?
before, someone had suggested me to define partner profile in WE20 and WE21, but they does not work.
waiting on desk
thanks
Edited by: Xinyou Dong on Jun 3, 2011 1:01 PM

Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

Logical System is not defined in table SMOF_ERPSH!

Similar Messages

Maybe you are looking for