Login failed
Hi,
I just created a user by this :
BEGIN
fnd_user_pkg.CreateUser(
x_user_name => 'MYUSER',
x_owner => 'CUST',
x_unencrypted_password => 'WELLCOM',
x_description => 'new_desc2',
x_email_address => 'new_email2',
x_fax => 'new_fax2');
end;
but when connecting to E-BUSINESS from browser I have :
Login failed. Please verify your login information or contact the system administrator.
What more should I do to enable it to connect ?
Thank you.
No, but sqlplus session is autocommit (I think, how to verify). And querying FND_USER I see my user created. Now it is ok, Ichanged his password in system from browser and he can connect.
Thanks to all.
Similar Messages
-
SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"
Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8 -
Login Failed error while creating a CR using Universe
Hi,
We created an Universe in SAP Business Objects system using SAP BW as source system and we selected sales cube for the universe.
For ex universe name is : xyz
Now i want to use this universe in crystal reports, we are using CR2008.
I logged in to Crystal Reports>Blank Report>Create New Connection>Universes>selected xyz universe and i got the keyfigures and chars in query panel for the selected universe, dragged and dropped some chars and kf's in to result objects.
After this when we click Ok it is giving an error message saying that Login Failed
We are unable to get the solution for this anybody please guide us to solve this.
Regards,
Pradeep.BHave you checked out this article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504a541a-8a1e-2b10-efa6-af8fb3d44e07
It has a section on troubleshooting Universe connections. -
Intermittant (not constant) SQL database ShareWebDb login failed events 3760 and 2424
My Sharepoint 3.0 services that were bundled with SBS 2008 appear to be working fine. Companyweb, etc, all work w/o issue, so I don't want to take violent action, but these errors seem to be accellerating so I would love to know if there is a known
solution.
I typically receive the following (these are in reverse time order, latest at the top, just as they appear in the event log):
Error Event ID: 3760 SQL Database 'ShareWebDb' on SQL Server instance 'np:\\.\pipe\MSSQL$Microsoft##SSEE\sql\query' not found. Additional error information from SQL Server is included below. Cannot open database "ShareWebDb" requested
by the login. The login failed. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
one second earlier:Error Event ID: 2424 The update cannot be started because the content sources cannot be accessed. Fix the errors and try the update again. Context: Application 'Search', Catalog 'index file
on the search server Search'
Information Event ID: 18456 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:06.000Z" />
<EventRecordID>491461</EventRecordID>
<Channel>Application</Channel>
<Computer>myserver.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data>[CLIENT: <named pipe>]</Data>
<Binary>184800000E000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
Two seconds earlier
Information Event ID 17137 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="16384">17137</EventID>
<Level>4</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:04.000Z" />
<EventRecordID>491460</EventRecordID>
<Channel>Application</Channel>
<Computer>mysever.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>ShareWebDb</Data>
<Binary>F14200000A000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I get more 3760 errors than 2424's. However, the
2424's do seem to usually correspond to a 3760 18456 17137 occurance and the
3760 are always preceeded by 18456 17137. I was getting one or two sets a day, lately that has increased to 5 or 10.
I've done a lot of
web research on Sharepoint Errors 3760 and
2424 and I see a number of people are experiencing the the same issue. Most of what I've come across for solutions do not apply, since errors are intermittent, not chronic and my public remote URL has already been added
to BackConnectionHostNames as per:
http://blogs.technet.com/b/sbs/archive/2009/08/05/sharepoint-services-3-search-event-errors-after-an-sbs-2008-update-rollup.aspx
I installed the SQL Server Management Studio Express so I could try to track down the permissions on this database. I see the SQL server instance, MYSERVER\Microsoft##ssee, and it shows as running, but when I try to connect to it I get the following
error: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)" I'm assuming that is because I don't have access permission for that internal database.
I don't see any errors in the event log related to failed logins or any errors at all from the SQL server, but there are the time matching informational entries right before the error events and lots of other 17137's and 2803's from MSSQL$Microsoft##sseeThank you Kevin, that does seem to match my symptoms and I have made the change suggested. Just incase that page becomes unreachable by others, here is the part of the page that applies to this:
Issue:
=========
Receive event error 3760 and 6398 on SBS 2008
Cause:
==========
Issue was caused by incorrect Auto Close option for ShareWebDb database
Solution:
==========
1. On the SBS 2008 server, click Start -> All Programs -> Microsoft SQL Server 2005, right click SQL Server Management Studio Express and choose run as administrator.
NOTE: You must run it as administrator to perform steps below.
2. In the Server Name box, type \\.\pipe\MSSQL$Microsoft##SSEE\sql\query, click connect.
3. Expand Database node and right click the ShareWebDb then choose properties.
4. Click Options in the left pane, in the right pane, please check whether the Auto Close option is set to True, if so, please change it to False. -
In Portal Anonymous mode - Change password option not coming- login fails
Hi Experts,
We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
Appreciate your help in solving this issue. I hope many would have faced similar situation.
Thanks
YusufHi Yusuf.
Do you use a standard or custom login module for your application?
More likely the used login module does not have a logic that handles such scenario as a change of user's password.
In this case you need to implement a custom module with a required functionality.
Best regards,
Aliaksandr Zhukau -
I am running these versions of CUCM 8.6.2.10000-30, CUP 8.6.4.12900-2 and using CUPC 8.6.3.20802.
Fully AD integration and AD authentication. All userids and passwords are operational.
I keep getting login failed when I try to loginto Cisco Unified Personal Communicator in VOICE LAB ENVIRONMENTHi,
The following troubleshooting doc for CUPC should help
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html#topic1
Please check the following sections:
Understanding the CUPC Boot-up Process
Cannot Log In to the CUPC When Troubleshooter Shows All Green
HTH
Manish -
I created second email account ([email protected]) with a Password but when I try to get mail and enter password, it says "Sending of Password did not succeed. Mail server mail.comcast.net responded: login failed". What am I doing wrong?
Have you logged on to the webmail account using a browser and enabled either Pop or Imap forwarding for that email address?
Have you created a mail account in Thunderbird that uses the chosen webmail forwarding option?
Password - make sure caps lock is not switched - it must be the same password you use to access the webmail account.
check:
Tools > account Settings > Server Settings
username = full email address
Please post info:
In Thunderbird
Help > Troubleshooting information
click on 'copy text to clipboard'
paste info in this question
edit /remove all info on fonts and printers. -
When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.
Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox -
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection
"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date: 3/12/2015
Time: 12:26:04 PM
User: NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯ -
Hi Everyone!
I am configuring an asa 5520 (Software Version 8.2(5)) serveral clientless connection profiles and ACS 5.3 as an authentication server, this works well users on AD or local can establish a vpn connection without problem, but now i need to show just one profile (common for everybody) on the ASA portal and behind scene allocate to right connection profile depending on the authorization profile of the user, i followed the following document
"VPN group lock using ACS 5.x.pdf", but it does not work as expected, it keeps showing "login failed"
So i took a look on the ACS on radius authentication and the user is authenticated, i did a debug aaa common 255, debug radius all
everything seem to be ok, but when i use debug webvpn 255
it shows me the following message
asa# webvpn_allocate_auth_struct: net_handle = D0200040
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name = SSLClientProfile
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from group list
webvpn_login_resolve_tunnel_group: TG_BUFFER = SSLClientProfile
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 1
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2447]
WebVPN: calling AAA with ewsContext (-780823792) and nh (-803209152)!
webvpn_add_auth_handle: auth_handle = 529
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5320]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name = SSLClientProfile
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 1
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1611]
WebVPN: user: (john) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[3066]
User came in on group he wasn't supposed to come in on!
webvpn_remove_auth_handle: auth_handle = 529
webvpn_free_auth_struct: net_handle = D0200040
Any suggestion would be appreciated
Thanks
JonathanJonathan,
The issue is clear, your users are not connecting to the right profile.
Please check this out:
ASA 8.x: Allow Users to Select a Group at WebVPN Login via Group-Alias and Group-URL Method
The idea of having ACS authorization is to assign a specific group-policy according to probably Radius attribute 25, but if you have it working in conjuction with the "group-lock" feature, then you need to make sure that the users connect to the correct connection profile, otherwise the group-policy will not allow the connection.
For instance:
group-policy test attributes
group-lock testGroup
tunnel-group testGroup general-attributes
default-group-policy test
tunnel-group testGroup webvpn attributes
group-url https://1.1.1.1/testGroup enable
So if a user connects to a different profile which is not the testGroup and gets the group-policy named test, then the connection is going to be rejected.
HTH.
Portu. -
Cisco Anyconnect "Login Failed"
in debug ldap 255, i see this message:
memberOf: value = CN=L-NOUSA-VPN_Access,OU=Security Groups,OU=NOUSA,OU=PROD,DC=wmh-ag,DC=org
[378534] mapped to Group-Policy: value = GroupPolicy_WM-Wisconsin
[378534] mapped to LDAP-Class: value = GroupPolicy_WM-Wisconsin
and
WM-Wisconsin# show run group-policy GroupPolicy_WM-Wisconsin
group-policy GroupPolicy_WM-Wisconsin internal
group-policy GroupPolicy_WM-Wisconsin attributes
wins-server none
dns-server value 10.155.17.246
vpn-tunnel-protocol ssl-client
default-domain value ABC-ag.org
and
WM-Wisconsin# show run tunnel-group WM-Wisconsin
tunnel-group WM-Wisconsin type remote-access
tunnel-group WM-Wisconsin general-attributes
address-pool Anyconnect-pool
authentication-server-group CA-LDAP-WM-AnyC
default-group-policy NO_VPN_ACCESS
tunnel-group WM-Wisconsin webvpn-attributes
group-alias WM-Wisconsin enable
When I try to login, it says "Login Failed"
it is evident from ldap debug that group policy is getting mapped to user, still failed.
When i change default group policy in tunnel group to GroupPolicy_WM-Wisconsin, it works ! but thats not the way i want....this solved he issue:
group-policy GroupPolicy_WM-Wisconsin attributes
vpn-simultaneous-con 10 -
Crystal reports "Database login failed" when using push method
I have a web application (ASP.NET, .NET v3.5), that pushes data to a CR 2008 report. On two servers one of the three reports returns a "Database login failed" error. I am stumped since there is no login, it's push not pull; in addition the problem is hard to debug since it works fine from my developers workstation. I have "updated" the xsd in that report, reinstalled the app, etc., non of which helped. If anyone has a solution or even ideas I'd appreciate the help.
What about following the troubleshooting steps as described in the blog;
Create an XML file off of your dataset. Make sure this is done just before you set the dataset to the report:
rpt.Load(rptPath)
myDataset.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
rpt.SetDataSource(myDataset)
Copy the above created XML to your development system
Open the problem report in the Crystal Reports designer
In the Desigger, go to the Database menu and select u201CSet Datasource Locationu201D
In the u201CReplace with:u201D pane, expand the u201CCreate New Connectionu201D folder.
Double click the u201CADO .NET (XML)u201D icon
Browse to the location of the XML file you created in step (1)
Click on the path to the XML. The <Update> button should enable
Click on the <Update> button
Typically, either of the following will happen:
You will get a u201CMap Fieldsu201D dialog. This indicates that the XML written off of your dataset does not match what the report is expecting. This may be due to incorrect fields name, incorrect field type, etc. You will now need eliminate the difference.
Incorrect data or no data. There is an issue with your dataset and you need to determine why the data is not present in your dataset. Looking at the XML may be a good place to start.
Ludek -
Hello Community
Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully.
I was able to understand Event Viewer logs, there was supposed to be 4 possibilities
one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
the error still occurred.
Then I used a Powershell command that displayed output but the Output doesn't make sense
because it is saying the login failed associated with the database that was created by the Search
Service application when it was created.
But how can that username be related to the Search Service database? Below is the output:
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Site=/
Area : SharePoint Server
Category : Database
Level : High
EventID : 880i
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlCli
ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlCli
ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser
.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
opyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
in(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) a
t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
onString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient
.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sy
stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
derInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionF
actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
ons) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.
Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderB
ase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFa
ctory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCo
nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.S
qlConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
Area : SharePoint Server
Category : Database
Level : High
EventID : 880k
Message : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
eryData monitoringData, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
er(SqlCommand command, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.Schema
Database.GetSchemaHighLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
Time() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Admin
istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) a
t Microsoft.Office.Server.UserProfiles.Co...
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
e login failed.' Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
eNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Login failed for user Server1\User1.' Source: '.Net SqlClient Data Provider' Number: 18456
State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : tzku
Message : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15' ConnectionState: Closed ConnectionTimeout
: 15
Area : SharePoint Foundation
Category : Runtime
Level : Unexpected
EventID : tkau
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlClie
nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClie
nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.
Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
pyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
n(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
nString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.
SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sys
tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
erInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFa
ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
ns) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.D
ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBa
se.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFac
tory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCon
nection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.Sq
lConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection() at Microsoft.Office.S
erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
a, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
hLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime() at Microso
ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
nID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Administration.UserProfile
ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) at Microsoft.Office.Se
rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName) at Microsoft.Office.Server
.UserProfiles.CoreProperty.get_ManagedPropertyName() at Microsoft.SharePoint.Portal.WebControls.ProfileP
ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch) at Microsoft.SharePoint.Porta
l.WebControls.ProfileUI.LoadProfileTable() at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
rol(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.
Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control
.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.U
I.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
, Boolean includeStagesAfterAsyncPoint)
Area : SharePoint Foundation
Category : Monitoring
Level : Medium
EventID : b4ly
Message : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
What does that username have to do with the database created by Search Service Application creation
and why can't I "Edit my profile" in My Profile?
Thank you
ShabeautUse Netmon to analyze the traffic and understand more on same
Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
or mysite
http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
add the SQL Server details into the hosts file on the WFE server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
If this helped you resolve your issue, please mark it Answered -
Reports successfully execute but generate a login failed for user 'sa' err
I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation. -
I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message:
"Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB.
Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
Thanks much! - Rookie DBAHi IWAR,
The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
Expand the database in which to create the new database user.
Right-click the Security folder, point to New, and then click User.
On the General page, enter a name for the new user in the User name box.
In the Login name box, enter the name of a SQL Server login to map to the database user.
Click OK.
Reference:
http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Sql Server 2012 Login Failed for user "NT Authority\System"
I have installed SQL Server on a new server. I have been getting the following error on each of the database in it.
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'ABC'. [CLIENT: xxx.xxx.xxx.xxx]
Here is some information on the instance:
1) Default instance
2) SQL Server, Sql Server Agent, Sql Server Reporting services are running / log on using a domain service account.
3) Sql Server Browser is disabled.
4) SQL Server VSS Writer is running / log on as Local Service.
5) NT AUTHORITY\SYSTEM does exists in Login with just public server roles.
I ran a trace on login failed and I get:
ApplicationName: Microsoft Windows Script Host
and it runs every 15 minutes.
Help please?Hi,
The error was thrown when the SCOM components connected to the backend SCOM databases.
You can specify a domain account, grant it the sysadmin role and the error should be gone.
Also, see the replies in your previous thread:
http://social.technet.microsoft.com/Forums/en-US/23f6b6cb-ec41-4117-8613-26d24c948827/login-failed-for-user-username-reason-failed-to-open-the-explicitly-specified-database
Thanks.
Tracy Cai
TechNet Community Support
Maybe you are looking for
-
Error while trying to publish a site...
Hello, I'm quite new to Muse and I wanted to try to publish my site, (which is at its very beginning) but I got an error message. It says "Error: Error uploading file +.png. Click resume to try again. If this problem persists, try again later". I kno
-
Hello. Our team is currently analyzing the possibility of upgrading from SunOne App. Server 6.5 to 7.0 and from JATO 1.2 to 2.0. We are searching for others who have done the upgrade and conversion. Some of the questions we have follow: If you have u
-
select-options:s_werks for likp-werks. plz tell me how to validate s_werks in this case. with example
-
Business presentation of wat KM is and what it offers
Hi, We (IT) want to implement Knowlegde management. But first we have to convince our business (client) . So we want to give a presentation of wat KM is and what it offers. This presentation will not be done on a real life system but we want to use s
-
GTS Export Declaration document Error
Hi, We have an error message while export declarion is procesed - Error message - "authorised value is 9". For more Info - the document was in monitoring but the wrong message type has been reprocessed : M7100 was reprocessed instead of P770. How ca