Login fails for laptops connecting via AirPort

Good afternoon.
We have a problem with Macbooks. When users try logging on to our server via our AirPort network, the login screen 'shakes' and rejects them. however, connected via Ethernet there is no problem.
I have a one-time fix. If I logon as the administrator, and log straight out, the user can logon just once. Subsequent logons fail.
The MacBooks have 10.4.8 and our server 10.4.8 server. Our collection of G3 and G4 iBooks are unaffected.
I'd appreciate any suggestions please.
Brian Bowell.
ICT Support Berkley Normal Middle School.

Hi. Thanks for your reply.
No, network accounts were not available via AirPort. However, I was sure it was a consequence of applying Security Update 2006-007. On Apple Suppport's Macbook Discussion I found a thread relating to the problems this update has caused, including 'hosing' AirPort. suggestions such as zapping the PRAM and resetting the PMU didn't work.
However, I'd missed an Intel update 'AirPortExtremeUpdate2007-001'. Once applied, the problem was solved.
Thanks again.
Brian Bowell
Berkley Normal Middle School.

Similar Messages

  • Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

    "[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
    After patches applied on patch Tuesday the database reports the above error. 
    All accounts are domain accounts and SQLServer uses Windows auth.
    DCDIAG show no errors
    All servers and DC have been restarted,
    Message in db log confirms the connection is being denied due to trust.
    Event log shows same rejection
    Protocols enabled: named pipes, tcpip, memory
    TESTS:
    PortQry: "
    TCP port 1433 (ms-sql-s service): LISTENING"
    Connect with domain admin accounts works from multiple clients systems to DB.
    Cannot connect with newly created domain admin account
    Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
    New standard user also fails to connect.
    NOTES:
    I removed the SSL patch and the IE security update to see if that was an issue.
    ¯\_(ツ)_/¯

    Has someone left the company or has an account of some nature been dropped/replaced?
    Please click "Mark As Answer" if my post helped. Tony C.
    Hi Tony,
    Srry but No.  We just installed the monthly updates.
    I went back and found I had missed removing a patch.  I missed the rollup for Windows Server 2003:
    Event Type: Information
    Event Source: NtServicePack
    Event Category: None
    Event ID: 4382
    Date:  3/12/2015
    Time:  12:26:04 PM
    User:  NETTEST\admin
    Computer: DATA1
    Description:
    Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
    After I removed that is still didn't work but after about five minutes it started working.
    I guess I ned to report that to MS after I research what might be changed to make the patch work.
    Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
    Thanks for replying.
    Well - maybe this will help someone else.
    Thanks again for replying Tony
    ¯\_(ツ)_/¯

  • Cannot connect to SERVER. Login failed for user 'DOMAIN\user'. (Microsoft SQL Server, Error 18456) - SQL Server 2012 on Windows Server 2008 R2

    I've seen multiple blogs and forums with similar problems and SQL 2012 or 2008. But no solutions that work for me.
    I have installed SQL Server in mixed mode (SQL and Windows authentication). I can create new Login accounts in either mode. However, I cannot get an AD security group Login account to work. I am trying to add group 'DOMAIN\Domain Admins' or 'SERVER\Administrators'
    as a Login so that any of the domain's administrator accounts can open SQL Server Management Studio and act as an 'sa' account on this server.
    I have deleted the SQL account 'DOMAIN\Domain Admins'.
    I have restarted SQL.
    I have restarted the Win2K8r2 server.
    I have launched SSMS as Administrator from the desktop of SERVER.
    I have launched SSMS as another user (and used 'DOMAIN\user' to lauch it) from the desktop of SERVER.
    I can create a login account named 'DOMAIN\user' (who happens to be a member of the 'DOMAIN\Domain Admins' group) and give this account 'sa' security, and when I do that, this account works as expected...
    How do I add a security group as a Login account and give all members of that group the ability to be an 'sa' account?

    Hi geoperkins,
    Are you getting the following error message?
    Error: 18456, Severity: 14, State: 11
    Login failed for user <Domain\user>. Reason: Token-based server access validation failed with an infrastructure error.
    If that is the case, the issue could be due to that the Windows login has no profile or that permissions could not be checked due to UAC. Please disable UAC firstly and check if it is successful to log in SQL Server.
    Another reason could be that the domain controller could not be reached. You may need to resort to re-creating the login. Create a new group in AD, add users to the new group, then add the group to the local admin group and create login for the group in SQL
    Server.
    There is a connect item describing similar issue for your reference.
    https://connect.microsoft.com/SQLServer/feedback/details/680705/cant-login-to-sql-using-windows-authentication-when-user-is-in-a-domain-security-group
    For more details about above error, please review the following blog.
    http://sqlblogcasts.com/blogs/simons/archive/2011/02/01/solution-login-failed-for-user-x-reason-token-based-server-access-validation-failed-and-error-18456.aspx
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Cannot connect to newly created SQL 2008 R2 instance. Login failed for user...

    I'm not a SQL guy, just figuring my way around here...
    I just created a new instance on an existing SQL server. The original instance works fine. On
    Database Engine Configuration > Account Provisioning
    I selected Windows authentication mode and added several users, myself among them.
    Tried to log in with one my account and getting:
    TITLE: Connect to Server
    Cannot connect to SERVERNAME\INSTANCE.
    ADDITIONAL INFORMATION:
    Login failed for user 'domain\myusername'. (Microsoft SQL Server, Error: 18456)
    Guidance/suggestions?
    Thanks,
    Scott

    http://sqlserver-help.com/2014/07/08/help-how-to-find-cause-of-login-failed-for-user-error/
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • SCCM Console issue, SQL connectivity login failed for SCCM machine account

    Hi ,
    As part of resolving the corrupt SCCM 2012 R2 environment, we have uninstalled the site from the Standalone primary site and restored it from the last backup. The database is on remote server on SQL 2012 SP1. Only Site recovery is run.
    Post the restoration on unable to launch the SCCM console, Error Could not connect to the site.
    When I checked the logs in the log file SmsProv.log in the program filles\Microsoft Configuration manager\logs, the error is as below
    *~*~e:\nts_sccm_release\sms\siteserver\sdk_provider\smsprov\sspobjectquery.cpp(6260) : SQL Connection attempt timed out~ SQL Error: [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
    *~*~SQL Connection attempt timed out [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
    <*><*> CANT CONNECT TO SQL, RETURNING ERROR <*><*>
    Regards
    Leela

    Duplicate post.
    https://social.technet.microsoft.com/Forums/en-US/6b26502b-ac07-426c-abe4-6cfdaa45b33b/sccm-console-launch-fails-sql-connectivity-issue-with-sccm-machine-account?forum=configmanagergeneral
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
    You do not have permissions to access a database that contains data required for this form to function correctly.
    An entry has been added to the Windows event log of the server.
    Log ID:5566
    When I go to the log files on the SharePoint server. I see the following error.
    Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
    I am guessing this has something to do with the UDCX connection and the database.
    Can anyone help me get this fixed?

    Hi Jim,
    Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
    in the UDC file explicitly.
    Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
    http://support.microsoft.com/kb/981684
    Thanks
    Daniel Yang
    TechNet Community Support

  • SQLException thrown by the physical connection: Login failed for user

    Hi Experts,
    I am creating a custom data source on Visual Administrator (2004s 7.01 SP3) for SQL 2008 with a named instance. Using Logon, System databases are getting connected. But Visual Administrator throws the below exception trace while attempting to connect to any custom created databases.
    Please help me to resolve this.
    Thanks in Advance,
    Nikhil

    java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: Error during runtime changes of application "sap.com/JDBCConnector_QIDB.xml". [id = ConfigError]
         at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.updateDataSourceApplication(DataSourceManagerImpl.java:705)
         at sun.reflect.GeneratedMethodAccessor647.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
         at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
         at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
         at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
         at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
         at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
         at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
         at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
         at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
         at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
         at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
         at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
         at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
         at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
         at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: java.rmi.RemoteException: Error occurred while making runtime changes with application sap.com/JDBCConnector_QIDB.xml; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3640850:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "QIDB".
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1825)
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.prepareStart(ContainerImpl.java:489)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
         at com.sap.engine.services.deploy.server.application.RuntimeTransaction.finalActions(RuntimeTransaction.java:286)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:339)
         at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.makeRuntimeChanges(DeployCommunicatorImpl.java:344)
         at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.updateDataSourceApplication(DataSourceManagerImpl.java:685)
         at sun.reflect.GeneratedMethodAccessor647.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
         at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user 'xxxx'.
         at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:193)
         at com.sap.engine.services.connector.jca.ConnectionHashSet.init(ConnectionHashSet.java:168)
         at com.sap.engine.services.connector.jca.ConnectionHashSet.<init>(ConnectionHashSet.java:134)
         at com.sap.engine.services.connector.jca.AdapterCache.open(AdapterCache.java:294)
         at com.sap.engine.services.connector.ResourceObjectFactory.startConnectionFactory(ResourceObjectFactory.java:316)
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1540)
         ... 40 more
    Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user 'xxxx'.
         at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
         at com.microsoft.sqlserver.jdbc.TDSTokenHandler.onEOF(Unknown Source)
         at com.microsoft.sqlserver.jdbc.TDSParser.parse(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection$LogonCommand.doExecute(Unknown Source)
         at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
         at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:163)
         ... 45 more
         at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.makeRuntimeChanges(DeployCommunicatorImpl.java:346)
         at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.updateDataSourceApplication(DataSourceManagerImpl.java:685)
         ... 28 more
    Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3640850:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "QIDB".
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1825)
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.prepareStart(ContainerImpl.java:489)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
         at com.sap.engine.services.deploy.server.application.RuntimeTransaction.finalActions(RuntimeTransaction.java:286)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:339)
         at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.makeRuntimeChanges(DeployCommunicatorImpl.java:344)
         at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.updateDataSourceApplication(DataSourceManagerImpl.java:685)
    com.sap.engine.services.connector.ResourceObjectFactory.startConnectionFactory(ResourceObjectFactory.java:316)
         at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1540)
         ... 40 more

  • Unable to connect to XL Reporter.  Login failed for user 'xlruser'

    Hi,
    I have one user getting the following error when starting XLR in 2005:
    Unable to connect to XL Reporter.  Login failed for user 'xlruser'
    I have done a clean uninstall of XLR on the client but the message still appears on starting the add-on
    Greig

    Check this SAP Note: 847981 Unable to connect to XLR after installation
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=847981]

  • Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'

    I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
    and Server, except the host name.
    connectionString
    ="Data
    Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
    However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
    Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
    of 3 databases. NTA\NS is not listed as a login specific to my target dB.
    My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
    to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
    How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
    add
    name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
    etc.
    Thanks for your time and patience on this Deployment 101 type issue.
    Kurt

    hi,
    You receive either of these error messages specifically when you use integrated security.
    To resolve you can use one of below.
    Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
    Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
    Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
    Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
    Thanx, Mark as answered if you are ok ..

  • Login failed for user 'IIS APPPOOL\DefaultAppPool' on SQL Express 2012

    I am new to both ASP.NET and SQL Server.
    I have IIS8 installed on my Windows 8 PC, together with SQL Server Express 2012. Given my ignorance, I have just set everything up using default values.
    I have a very small web site set up in its own folder and set up in IIS 8 as a virtual folder under the default web site. I have also set up a very simple database called 'StockControl' via SSMS, which contains one table called 'Colours' which has two columns.
    One page in the website is a simple ASP.NET form which runs on localhost without any problems.
    On the second page in the website I added a GridView ASP.NET control, letting Expression Web 4 generate the connection string and place it in a web.config file. I tested the SQL query and the connection as I went along and both came back as successful. So
    far, so good.However, when I try to run the page in the browser I get the error message:
    Server Error in '/' Application.
    Cannot open user default database. Login failed.
    Login failed for user 'IIS APPPOOL\DefaultAppPool'.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
    Login failed for user 'IIS APPPOOL\DefaultAppPool'.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SqlException (0x80131904): Cannot open user default database. Login failed.
    Login failed for user 'IIS APPPOOL\DefaultAppPool'.]
    I have spent two days trying to find out what I have done wrong and even uninstalled and re-installed SQL Server just in case i'd totally messed up and corrupted the database.
    I would really appreciate some help please.

    I changed the IIS default identity to NetworkService and got this error instead
    Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\StockControl.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".
    An attempt to attach an auto-named database for file C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\StockControl.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
    There is nothing running that is using the database.
     I have also set a login up for the Apppool and set the user mapping to the database but the problem persists,
    What is so infuriating is that a week ago I had several pages in this website that displayed, inserted, updated and deleted records on this database using ADO as well as ASP.NET running just fine. Then this problem came out of nowhere.

  • Printing problems with HP 1012 connected via Airport Extreme - resolved?

    I originally posted on this issue in a long-running discussion on HP printer issues.
    http://discussions.apple.com/message.jspa?messageID=10109788#10109788
    Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
    Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
    Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
    a. I turned off AP on the iMac.
    b. I unplugged the AE base station for one minute+, then re-powered it.
    c. I opened my MBP with 10.5.7. Started up Airport Utility.
    d. I renamed the base station. Left all other settings alone.
    e. I installed the 7.4.2 firmware upgrade.
    f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
    g. I turned on AP on the iMac.
    Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
    Too early to tell if I will have any further problems if if it permanently fixed.
    Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
    Stan

    I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
    I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
    So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
    How to:
    Turn printer on.
    open System pref/ printer-fax/ add printer
    Select hp desktop 5100
    (name: -- Change name if you want - I kept " hp deskjet 5100"
    Location: Your computer
    Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
    Select OK

  • Com.microsoft.sqlserver.jdbc.SQLServerException Login failed for user '' ..

    Hi All,
    I have the following weird problem when trying to connect to MSSQL 2005 database using JDBC and windows authentication.
    I am using the following command:
    DriverManager.getConnection("jdbc:sqlserver://<<MACHINE IP>>:;database=<<DB NAME>>;integratedSecurity=true;","<<DOMAIN USER NAME>>","<<DOMAIN USER PASSWORD>>")and I get the following exception:
    com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.
    I tried to google this exception but all I can see is similar one but the exception also contain the user name. Please note that in the exception I get, the user name is not listed..
    I also checked it with various connection strings (I also tried to put the user name and password in the connection string, using the parameters 'user' and 'password'), but I always get the same result.
    Also, when I used SQL authentication I am able to connect to the SQL (after I remove the 'integratedSecurity' param).
    The SQL server is configured to work with both SQL and Windows authentication- I am able to log in to the SQL (with Microsoft SQL server management studio express) with the same windows user.
    The sqljdbc_auth.dll is also located in the class path.
    Does anyone have any idea what I am doing wrong?
    Thanks,
    Uri

    jschell wrote:
    TheAvalanche wrote:
    When I log in to the MySQL server, using windows authentication, I see that it use the same domain user I try to use via JDBC. Is there anything else I need to configure?
    You need to load a sqljdbc_auth.dll (or more specifically: point to it with -Djava.library.path or add it to the path), as is explained in the Microsoft SQL Server JDBC documentation on integrated security: [http://msdn.microsoft.com/en-us/library/ms378428.aspx]
    Interesting. One would hope that it would at least provide a different error message if it didn't find that.I don't know, I haven't used integratedSecurity much. With the DLL the JDBC driver will send the credentials of the currently logged in user to the database server, and maybe the parameter integratedSecurity=true is just an instruction to the database server to actually use those credentials for login if they are there, or maybe supplying a user name and password as the OP did will override the integratedSecurity setting and the DLL is never actually used.

  • Internet connection via Airport Extreme/router thats not working, why?

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

  • Get-splogevent Correlation ID, login failed for "Edit My Profile" in My Profile Error An unexpected error has occurred

    Hello Community
        Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
    Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully. 
    I was able to  understand Event Viewer logs, there was supposed to be 4 possibilities
    one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
    I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
    the error still occurred.
        Then I used a Powershell command that displayed output but the Output doesn't make sense
    because it is saying the login failed associated with the database that was created by the Search
    Service application when it was created.
        But  how can that username be related to the Search Service database?  Below is the output:
    Area     : SharePoint Foundation
    Category : Logging Correlation Data
    Level    : Medium
    EventID  : xmnv
    Message  : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
    Area     : SharePoint Foundation
    Category : Logging Correlation Data
    Level    : Medium
    EventID  : xmnv
    Message  : Site=/
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880i
    Message  : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
               equested by the login. The login failed.  Login failed for user Server1\User1.     at System.Data.SqlCli
               ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlCli
               ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser
               .Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
               opyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
               in(Boolean enlistOK)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
               Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)     a
               t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
               directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
                  at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
               onString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient
               .SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
               ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at Sy
               stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
               derInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionF
               actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
               ons)     at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)     at System.
               Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)     at System.Data.ProviderB
               ase.DbConnectionPool.GetConnection(DbConnection owningObject)     at System.Data.ProviderBase.DbConnectionFa
               ctory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenCo
               nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)     at System.Data.SqlClient.S
               qlConnection.Open()     at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880k
    Message  : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
               eryData monitoringData, Boolean retryForDeadLock)     at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
               er(SqlCommand command, Boolean retryForDeadLock)     at Microsoft.Office.Server.Search.Administration.Schema
               Database.GetSchemaHighLevelInfo()     at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
               Time()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
               appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy)     at Microsoft.Office.Server.Admin
               istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName)     a
               t Microsoft.Office.Server.UserProfiles.Co...
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880j
    Message  : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
               e login failed.'    Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
               eNumber: 65536 Server: Server1\Servers
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880j
    Message  : SqlError: 'Login failed for user Server1\User1.'    Source: '.Net SqlClient Data Provider' Number: 18456
                State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : tzku
    Message  : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
               7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15'    ConnectionState: Closed ConnectionTimeout
               : 15
    Area     : SharePoint Foundation
    Category : Runtime
    Level    : Unexpected
    EventID  : tkau
    Message  : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
               equested by the login. The login failed.  Login failed for user Server1\User1.    at System.Data.SqlClie
               nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClie
               nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.
               Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
               pyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
               n(Boolean enlistOK)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
               nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)     at
                System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
               irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
                 at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
               nString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient.
               SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
               ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at Sys
               tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
               erInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionFa
               ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
               ns)     at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)     at System.D
               ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)     at System.Data.ProviderBa
               se.DbConnectionPool.GetConnection(DbConnection owningObject)     at System.Data.ProviderBase.DbConnectionFac
               tory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenCon
               nection(DbConnection outerConnection, DbConnectionFactory connectionFactory)     at System.Data.SqlClient.Sq
               lConnection.Open()     at Microsoft.Office.Server.Data.SqlSession.OpenConnection()     at Microsoft.Office.S
               erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
               a, Boolean retryForDeadLock)     at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
               , Boolean retryForDeadLock)     at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
               hLevelInfo()     at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime()     at Microso
               ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
               nID, SearchServiceApplicationProxy searchAppProxy)     at Microsoft.Office.Server.Administration.UserProfile
               ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName)     at Microsoft.Office.Se
               rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName)     at Microsoft.Office.Server
               .UserProfiles.CoreProperty.get_ManagedPropertyName()     at Microsoft.SharePoint.Portal.WebControls.ProfileP
               ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
               prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch)     at Microsoft.SharePoint.Porta
               l.WebControls.ProfileUI.LoadProfileTable()     at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
               rol(Object sender, EventArgs e)     at System.EventHandler.Invoke(Object sender, EventArgs e)     at System.
               Web.UI.Control.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control
               .LoadRecursive()     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control.LoadRecursive()
                  at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control.LoadRecursive()     at System.Web.U
               I.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
               , Boolean includeStagesAfterAsyncPoint)
    Area     : SharePoint Foundation
    Category : Monitoring
    Level    : Medium
    EventID  : b4ly
    Message  : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
        What does that username have to do with the database created by Search Service Application creation
    and why can't I "Edit my profile" in My Profile?
         Thank you
         Shabeaut

    Use Netmon to analyze the traffic and understand more on same
    Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
    Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
    or mysite
    http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
    add the SQL Server details into the hosts file on the WFE server.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
     Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
    If this helped you resolve your issue, please mark it Answered

  • Reports successfully execute but generate a login failed for user 'sa' err

    I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005,  the following error messages are being generated each time a crystal report is ran:
    - Login failed for user 'sa'.
    - Error: 18456, Severity: 14, State: 8.
    We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
    It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
    I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
    Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?

    What happens if you use Profiler when running the report using Crystal Report Designer?
    If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
    Also, need to know what patch level you are on?
    We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
    No additional patchs have been applied since Crystal Reports Server was installed.
    We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
    The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application.  The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
    Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''. 
    Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation.

Maybe you are looking for