Login screen on MacBook Pro Retina (Late 2013) with enabled File Vault is extremely slow (suttering)

Hi
I have a MacBook Pro Retina (Late 2013) with enabled File Vault on OS X Mavericks. When I boot up the mac freshly it takes quite long to get to the initial login screen (which as I understand is a pre-boot login provided by the recovery partition if File Vault is enabled). However, what is even more bothering me is that once I get to this screen, the whole UI is behaving extremely slow. The mouse makes jumps of a few inches on the screen and the animations (e.g. if you click a user and then an animation shows the password entry field) are running in slow motion and only update every few seconds. Typing the password afterwards runs smothly again (altought for example moving the mouse at this point still behaves as described before). After loggin in to the account OS X runs fine without any hicks. Can anyone give me a hit what this could be and how I could resolve this?
This has already been done:
Reset PRAM
Boot into recovery partition and run repaired disk and disk permissions
Run all OS X maintenance operations and cleared caches using OnyX
What I could imagine is that somehow the recovery partition is damaged (which as I understand is used to boot to the login screen if File Vault is enabled).
Any help would be greatly appreciated.
Chris

Just ordered a Retina MacBook Pro11,2 (mid-2014 15", 2.2GHz Intel Core i7, 16GB RAM, 512GB SSD, OSX 10.9.4 Pre-installed - Build 13E28)  and have the exact same issue.  The first thing I did when i booted it for the first time was enable FileValut2 and encrypt the disk.  Though I failed to notice this behavior prior to encrypting the disk, the stuttering/lag happens without fail every time I have logged in from a cold boot, locked screen or sleep. Additionally I have noticed the same stuttering behavior when switching tabs on various built-in OSX applications such as the tabs on the About This Mac > More Info.... (System Information) dialog for example, and similarly other dialogs that experience this behavior of resizing when switching tabs. I was running no other software than About This Mac > More Info ... (System Information) and OSX 10.9.4 itself.  The issue happens without fail with and without a USB mouse plugged in.
I am really glad to have found this thread and with such recent posts.  I'd love to find out that this is just a software bug that will be fixed when OSX 10.10 "Yosemite" is released.  If not, I hope the cause of this bug is determined soon so I can still exchange or have it repaired.
Migflono and Matthew, would you be able to post your hardware specs for comparison? 

Similar Messages

  • How to triple boot (MacOSX / Win7 / Linux) a MacBook Pro (Retina, late 2013) with Refind

    ok it's not a question, it's an howto.
    You do it at your own risk. No failure reported so far, but I'm not responsible for anything.
    If you try to multiboot your MacBook Pro (MBP hereafter) you may face a new complexity. With on partition, Bootcamp does a pretty amazing job installing windows. But when you want to partition your disk in your own way, Bootcamp may fail to install windows and another third OS. You may also want to have a share partition between your OSes, hence have multiple partitions. Most of this tuto should also work for Windows 8 and for other Macbooks.
    Problem 1 : Bootcamp does it with one partition that it divides in two and allow to setup Win7. Not all time though since some user reportidely have problems to get USB 3 support and the keyboard and mouse are non working during the install / setup phase.
    Problem 2 : Windows 7 is not able to install itself to a GPT partition and needs an Hybrid MBR. Bootcamp does this, but just for a Dual OS setup. So to make the magic happen in a multi OS environment, you'll have to do want bootcamp does, manually.
    Step 1 : Download the OS X Recovery Disk Assistant from Apple and flash it to a USB stick. (http://support.apple.com/kb/DL1433)
    Step 2 : Reboot, holding the option key (aka CMD, left of spacebar) down, to trigger the boot menu options. Start the usb drive with OS X recovery and enter the partition tool. Create 3 to 4 partitions, suiting your tastes. Just put windows partition first and I recommend to put the partition sharing data across OSes second, MacOS 3rd and Linux Last for example. MacOS and Linux are fine with pretty much every setup, Windows need the 1° usable partition.
    Step 3 : Migrate your Macos using the same tool (google it for details) or Reinstall MacOS from the recovery partition. (more about migration here, but there are better tuto on this)
    Step 4 : Start your MacOS and create a bootcamp USB stick with the bootcamp tool. You need an ISO from Win7 (or Win 8) and a drive of at least 4 GB. Bootcamp will most likely complain about the fact that it will not be able to install 7 due to the fact that you don't have only one partition, ignore and proceed to the Bootcamp USB stick setup.
    Step 5 : Adding the USB3 support to your Win7 installation. Plug your newly created Win7 USB stick to a computer running Windows. In the sources directory, copy the boot.vim on your disk drive and add the drivers that Bootcamp added to your USB stick, in the $WinPEDriver$ directory and follow these instructions to add them to your boot.vim image. Follow carefully every step, it does works. Add the drivers you feel like, commit and copy back your boot.vim image, patched, to your USB stick, in the sources directory.
    Step 6 : In your MacOSX, install the GPT fdisk partition tool. You just have to unzip the archive. Win7 is unable to install to a GPT disk, so you will have to create a (dirty) Hybrid MBR. From a terminal, launch GPT fdisk. Carefull here, the Win7 is most likely not the 1st but the 2nd or 3rd because there is an UEFI partition before. Just check before adding them if in doubt, by striking p. Then key in r then h then the number of the partitions you want to add to this hybrid MBR (the Win7 & the Shared one). Accept the type 07 for this partition and type y, n & finally w. (more details here for the fans)
    Step 7 : Reboot, keep the CMD key down to trigger the boot option menu. Reboot on the USB stick, install Win7. If it doesn't understand the partition made for it, format it, if needed, from the 7 installer, delete and recreate it.
    Step 8 : Install your favorite Linux distro with a USB stick generator. (see here & here). No complex part, except that Grub will most likely scratch your nice Hybrid MBR, rendering Win7 inaccessible. No problem, reboot in MacOS and redo step 6, this will revive your win7.
    Step 9 : It's cosmetic but keeping CMD key down to boot is not so practical. ReFind does it just great. Setup is super easy, just kick install.sh from a shell in MacOS. Fine tune decoration and some stuffs later on from the config file.
    Step 10 (optionnal) : You want it all, without switching between OSes? Having Windows app running within MacOS is easy, with most native hardware acceleration preserved, using Parallels desktop. It also works with a "simple" Bootcamp Windows setup.
    Enjoy your mighty triple boot MBP.

    Just ordered a Retina MacBook Pro11,2 (mid-2014 15", 2.2GHz Intel Core i7, 16GB RAM, 512GB SSD, OSX 10.9.4 Pre-installed - Build 13E28)  and have the exact same issue.  The first thing I did when i booted it for the first time was enable FileValut2 and encrypt the disk.  Though I failed to notice this behavior prior to encrypting the disk, the stuttering/lag happens without fail every time I have logged in from a cold boot, locked screen or sleep. Additionally I have noticed the same stuttering behavior when switching tabs on various built-in OSX applications such as the tabs on the About This Mac > More Info.... (System Information) dialog for example, and similarly other dialogs that experience this behavior of resizing when switching tabs. I was running no other software than About This Mac > More Info ... (System Information) and OSX 10.9.4 itself.  The issue happens without fail with and without a USB mouse plugged in.
    I am really glad to have found this thread and with such recent posts.  I'd love to find out that this is just a software bug that will be fixed when OSX 10.10 "Yosemite" is released.  If not, I hope the cause of this bug is determined soon so I can still exchange or have it repaired.
    Migflono and Matthew, would you be able to post your hardware specs for comparison? 

  • 15 inch macbook pro retina late 2013 with uneven LED backlighting

    Hi, I have a recently bought a 15 inch rMBP late 2013 model less than a month ago through the apple online store. Since day one, I have noticed a slight grey band of shadow about an inch thick running vertically from top of the screen to the bottom about 2/5 distance from the left. It is obvious when the screen is completely white such as during startup. It is less obvious when the brightness of the screen is turned up. It is not so obvious when viewing picture but I do notice it all the time especially when I do word processing where the background is white.
    Is my macbook pro screen defective? Can Apple replace it for me?
    Kindly englighten. Thank you.

    Make a Genius Bar Appointment at your local Apple store. If it is defective, it sounds as if the display itself (and not the GPU) is faulty. Either way, it would be a hardware issue. Apple will replace the necessary components free of charge under your one year limited warranty which comes with the machine.
    *You can attempt to reset the SMC as a first step: Intel-based Macs: Resetting the System Management ...
    Message was edited by: nbar

  • Photoshop CS6 performance on new Macbook Pro Retina Late 2013

    Hi guys,
    Just bought the new 13" Macbook Pro Retina Late 2013 with 8GB RAM and 256SSD.
    Installed CS6 with all patches and retina update but performance is appaling. Im editing a Nikon D800 file which I know is heavy, but when zoomed in at 100% and using the healing brush it is unusable. There is so much lag on the brush it takes a second after i lift my pen for the stroke to be finishes.
    Happening in Scaled & Best for Retina screen modes.
    My 2005 Core 2 Duo laptop with 4GB of ram and windows 7 did this without hiccups, so I cant believe this brand new laptop cant do it.
    Any ideas? Its really unusable now.
    Cheers

    Here is the email I got from Wacom.
    This is the person that contacted me after I sent them an email
    Dick,
    If you downloaded and installed the latest Mac OS X driver, it will not work with your Intuos2 tablet.  If you OS X is 10.6+, here are driver directions to follow for a clean install and a link to the last driver:
    Open your Applications folder and locate any Tablet or Wacom Tablet folders you have
    Use the Utility in each of these folders and click ‘Remove’ under ‘Tablet Software’
    Once the software is removed, restart the computer
    After restarting, download and install the latest 6.20 driver from:http://cdn.wacom.com/U/drivers/mac/pro/WacomTablet_6.2.0w4.dmg
    As always, make sure your tablet is connected directly to your computer.
    Avoid using USB hubs, keyboard/monitor ports, or docking stations with the tablets, as they can cause inconsistent behavior.
    Linda Evenson
    From:
    Sent: Monday, December 02, 2013 6:22 PM
    To: Support Group Email
    Subject: Support Email - Installation
    <Email Edited by Host>

  • MST Support for MacBook Pro Retina Late 2013 - DisplayPort 1.2 - Will it ever happen? (with sources)

    So back in October, I purchased a brand new Macbook Pro Retina (MBPr), fully loaded with top of the line specs.  I was soooo excited to have Thunderbolt 2 tech which Intel AND Apple describes as having DisplayPort 1.2a compatibility - which up to this point is unfortunately NOT the case.  The point of the information/questions and requests in this article is to engage a conversation about the issues of not having MST support after Apple falsely mislead their consumers to think otherwise - especially when it is clear the MBPr is capable.  Please read on...
    Apple advertises that the Thunderbolt 2 ports on BOTH the MBPr and the new Mac Pro (NMP) will have 4K Display support with the famed 20gb/sec Ports (DisplayPort 1.2 only requires a little above 17gb/sec).  Now that the 10.9.1 update has been released, we have failed to see MST or Multi-Stream Transport enabled on the MBPr Late 2013.  Now, as for the New Mac Pro- it DOES have MST enabled in 10.9.1 with the AMD GPUs.  For all of you out there that's questioning what this means, short answer is basically the Mac Pro will be able to power a 4K Monitor at 60Hz through the Thunderbolt 2 Port but the New MBPr is stuck with only HDMI 1.4 support which tops out at 4K 30Hz. 30Hz is unacceptable for anything but movies or a photo slideshow.  At 30Hz the cursor will jump across the screen, eliminating any of the benefits of 4K.
    BUT it gets worse...
    Apple can be seen advertising that the new MBPr 15" model can power a 4K monitor THROUGH the Thunderbolt 2 Port here: http://www.apple.com/thunderbolt - This article quotes the following:
    "Now with Thunderbolt 2 built into the new Mac Pro and MacBook Pro with Retina display, you can connect the latest 4K desktop displays and get double the bandwidth for your peripherals. And the two generations of Thunderbolt technology are compatible with each other."
    Does this not let the consumer assume that the newest MBPr will be able to drive a 4K display through the Thunderbolt 2 Port?  I would say yes it does, but at the time I wrote this, the TB2 Ports can't power a 4K display because, as previously stated, MST is disabled in Mavericks for the 15" MBPr Late 2013.
    NOW, later on Apple posted the following article on 4K support here: http://support.apple.com/kb/HT6008
    4K support on the MacBook Pro (Retina, Late 2013)
    MacBook Pro supports 4K displays and Ultra HD TVs at the following resolutions and refresh rates with the built-in HDMI port:
    3840 x 2160 at 30 Hz refresh rate
    4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
    In the article above the New Mac Pro is listed as having support for a 4K Display with the Thunderbolt 2 Port (or MST DisplayPort 1.2a Technology) at 60Hz with no problem.  This leads myself and many others to believe that MST will NEVER be enabled on the newest MacBook Pro Retina with Nvidia GPUs. Yes, 4K IS supported but ONLY through the HDMI 1.4 port, which has the limitation of only 30hz.  This two-faced advertising is extremely upsetting to a LOT of people, including myself.
    Interestingly enough, THIS IS NOT a hardware issue.  If one ventures into Windows 8.1 via Bootcamp and connects a 4K Display via the Thunderbolt 2 (or through DP1.2) Port, the Display registers at 60Hz, thus proving that the Thundberbolt 2 Hub Controller is completely capable of MST DisplayPort functionality.  Clearly this a driver issue with Apple, Nvidia or Intel or any combination.  What Apple has done here is forcing any professional that desires stable and clear 4K technology through their MacBook Pro Retina to do so only using Windows 8.1 on their own machines!  Definitely an oxymoron if you ask me...
    Later on when the Mac Pro was ready for ordering, Apple placed the Sharp PN-K321 as a compatible option for a 4K Display.  On the Store page featuring the (over three thousand dollar) Sharp 4K display, located here http://store.apple.com/us/product/HD971LL/A/sharp-32-pn-k321-4k-ultra-hd-led-mon itor?fnode=53 Apple states the following:
    "Note that 4K DisplayPort operation is only compatible with the new Mac Pro (Late 2013)."
    All of that being said, and I'm terribly sorry for my wordy ranting...
    This brings me to a final two requests to ANYONE reading this post:
    a) Has anyone working with the new 10.9.2 Beta Update seen evidence that DisplayPort 1.2 capabilities will be enabled for the new MacBook Pro Retina (Nvidia 750M) with the promised "Graphics Driver Updates" within the next Mavericks update?
    and
    b) To others that purchased or were/are thinking of purchasing a new MacBook Pro Retina with TB2 Ports: If you are just as upset as me about this crushing blow to consumers that just purchased a $3,000 laptop that were promised something that wasn't delivered - I urge you please, write to Apple and let them know they are making a mistake.  You can do this though the support page or through http://www.apple.com/feedback
    Thank you for your precious time, and if anyone has anything to contribute to this issue, please jump in....

    GOOD NEWS!
    The Mavericks 10.9.3 update adds official support for Thunderbolt 2, 4K!
    I'm not sure if you will be able to daisy chain anything to the 4K display.  I've read that the design of Thunderbolt 2 includes support for DisplayPort 1.2 multi-stream (MST), which allows this type of daisy chaining with 4K, but we don't know if Apple has this supported on it's machines.  Apparently it's been buggy in development because the graphics driver needs to work correctly with the Thunderbolt 2 host controller.  I'm sure they will work it out if they haven't already.
    The above is all via found information on this topic, but you can follow some more discussion here:
    http://forums.macrumors.com/showthread.php?t=1713876
    One more note on Thunderbolt worth sharing: always keep your fastest peripherals closer to the computer in the chain. If you have a TB1 device directly connected to the computer, anything further down the chain will be limited to TB1 speed/capability regardless of it's native speed.  Always connect TB2 devices first, and save anything TB1 for the end of the chain.

  • I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error

    I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error. Is this an issue with the bootcamp driver not compatible with Windows 8.1? or is there something I can do to fix this.
    I also keep getting WHEA-Logger Event-ID 19 warning events in the Windows Event Logs with the following details.
    A corrected hardware error has occurred.
    Reported by component: Processor Core
    Error Source: Corrected Machine Check
    Error Type: Cache Hierarchy Error
    Processor APIC ID: 3
    The details view of this entry contains further information.

    likely win8.1 dont have official bootcamp support yet
    1/3 of my logins into win8.1 result in a fatal bluescreen
    was the same deal when I installed win8 before official support
    and when the drivers with official support was released the issue went away

  • HT204289 Apple tv a1469 7.1 to macbook pro retina late 2013 yosemite 10.10.2 peer to peer airplay connection probem..?

    Macbook pro retina late 2013 yosemite 10.10.2 wifi bluetooth both turned on same thing for apple tv a1469 and there isn't any network or internet connection. Macbook pro can see apple tv as a mirroring device but cannot connect to apple tv a1469. There is a connection failed or the screen code is wrong message appears but no peer to peer airplay between macbook pro retina and apple tv a1469. On the ios side everything just works except sometimes there is no audio problem (when switching between different apps) between ios and apple tv but on the screen mirroring side everything looks ok. Please help me to connect apple tv a1469 to macbook pro, thanks.
    Airplay peer-to-peer

    Macbook pro retina late 2013 yosemite 10.10.2 wifi bluetooth both turned on same thing for apple tv a1469 and there isn't any network or internet connection. Macbook pro can see apple tv as a mirroring device but cannot connect to apple tv a1469. There is a connection failed or the screen code is wrong message appears but no peer to peer airplay between macbook pro retina and apple tv a1469. On the ios side everything just works except sometimes there is no audio problem (when switching between different apps) between ios and apple tv but on the screen mirroring side everything looks ok. Please help me to connect apple tv a1469 to macbook pro, thanks.
    Airplay peer-to-peer

  • 15" MacBook Pro (Retina, late-2013) and Microsoft Office 2011

    Is there a known issue with Microsoft Office 2011 and the 15" MacBook Pro (Retina, late-2013)?  Specifically, is there an issue with how MS Office (e.g., MS Word) displays one the Retina screen?
    Thank you.

    If you used VMware Fusion to install Windows, first make sure you have installed VMware Tools in Windows. Read > http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=display KC&externalId=1003417
    Then, you will be able to change the Windows resolution as usual. In Windows, right-click in the desktop and select "Screen resolution". There are other ways to do this > http://windows.microsoft.com/en-us/windows-8/get-best-display-monitor.
    There are not best recommended settings because it depends on the hardware of your computer: for example, if you have got 8 GB of RAM, you can assign 4 GB of RAM to the virtual machine (depending on the applications you use), or if you have got a Quad-Core processor with Hyper-Threading, you can assign more processor threads to the virtual machine so you can improve performance.

  • How to get new Macbook Pro Retina (late 2013) to detect external monitor via HDMI?

    Hi everyone, this is my first Mac and for the most part it's been really, really wonderful.
    This is my first major glitch:  I cannot get it to detect my external display:  It is an ASUS PA248Q, manufactured Aug 2012.
    The HDMI cable according to my Amazon history is at least 1.3c from 2010,  "Fanatic Digital Imperial Series Gold-Plated HDMI Cable (6 feet)".
    It works with perfectly connecting an AmazonTV box to an old Samsung TV, with vivid clarity, unlike our cableTV signal.
    Just in case, I have a new HDMI cable on order, which claims to be of newest standards.
    The Macbook Pro Retina (late 2013) has the standard Intel Iris from the Haswell chips, as well as Nvidia GT 750M, the latter which I don't think has been used yet.
    The ASUS display says:  HDMI NO SIGNAL.
    I have tried shutting them down and replugging the cable.  I don't know what the ideal order is.  The Macbook Pro is plugged into AC power, as suggested.
    In System Preferences>Display, I press the Option key to select "Detect Displays" option (seriously unintuitive).
    I have also tried resetting the NVRAM:
    I shut the machine down.  Pressed the power button, then quickly held the quadruplet:  Option-Command-P-R  (a double handful) and waited for the machine to chime a 2nd time.  Tried to detect external display no luck.
    Next, I reset the SMC:
    I shut the machine down.  Then I pressed Shift-Control-Option-Power   for about 5 to 10s.  Then I turned on the machine normally.
    NVRAM & SMC steps were from an old youtube video, as the instructions I had did not explain how to do so clearly.
    Please let me know if I"m doing something wrong.
    Seems so exorbitant to pay $350 for Apple Care;  that's a the cost for a whole new cheap laptop.
    I will search the forums again.  If anyone answers this,  thank so much!

    Hello there, willr314.
    It sounds like you've covered most of the practical steps found in this Knowledge Base article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573#1
    No video or no signal, image distortion, "snow," or flickering
    Check connections
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    The article does offer some additional links and recommendations as well:
    These articles may offer additional assistance and information about displays and video adapters:
    Apple Portables: How to use your computer in closed lid mode with an external display
    Apple Cinema Display (30-inch DVI) has 1280 x 800 as the maximum available resolution
    Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
    For assistance with Retina displays, please see Frequently asked questions about using a Retina display.
    If you tried all of these steps for your display and the video issues persist, contact Apple technical support or take your Apple computer to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Despite EFI update, Trackpad unresponsive on MacBook Pro Retina (Late 2013)

    Tonight (Nov 11), my trackpad stopped working completely on my MacBook Pro Retina (Late 2013 - OS X 10.9). It does not seem to notice anything (clicks, movement, scrolling, etc.). Also my keyboard has stopped working once.
    I have the Macbook Pro EFI Firmware Update (Version 1.3), which was apparently installed as of November 8th. I've read that it is supposed to fix the problem, which is odd because the issue did not start for me until after I had the update. Would be grateful for some help. Thank you.
    (Currently, I'm using my Logitech Cordless Click Optical Mouse as a replacement.)

    I also have experienced the same problem even though I have installed the update.
    I have asked Apple to ring me for a discussion today, however, not sure what can be done if the fix doesn't do what its supposed to do.
    Happy days (my first Macbook pro) not so happy!!!
    I would be grateful for any thoughts as to how I can prevent the lockups
    Regards
    Berniejd

  • OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013

    OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013
    OS X Mavericks 10.9.1 installer is available in the App Store but it can't be downloaded because "OS X Mavericks can't be installed on this computer".
    If the installer of version 10.9 is already in the application folder it can't be updated for the same reason.
    I've seen that they are two versions of the updater that are downloadable from apple's website and one is specific for the MacBook Pro retina late 2013.
    I suspect that the installer in the App Store is not an universal installer. It is stupid because you can't reinstall that Mac is needed.
    I phoned to Apple (AppleCare) and they don't know why this happens.

    Hello,
    Try to boot the 15" MBPr as target when connected to your MBA (if you have the right cables and adapters).
    From the MBA, install on the 15" MBPr's disk, in that order :
    The 10.9.1 update for Mavericks except MBPr
    Download
    and then the 10.9.1 update for Mavericks specific for MBPr
    Download
    The MBPr should be bootable again. I did it for an external HD.
    Hope this helps.
    Best,
    ÉrIC Miclo

  • HT1379 Help! can´t get 2560 resolution in dell 2711 on macbook pro retina late 2013, only 1920...

    can´t get 2560 resolution in dell 2711 on macbook pro retina late 2013, only 1920...i have the apple thunderbolt to dvi adapter and the dual dvi cable...
    thanks for any help

    http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.3- 15-dual-graphics-late-2013-retina-display-specs.html
    says:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600 (x2*)
    Details:
    *This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single 1080p display at up to 60 Hz, 3840x2160 at 30 Hz, or 4096x2160 at 24 Hz via HDMI. Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?

  • MacBook Pro Retina Late 2013 Compatibility issue with Bose Companion 5 USB Speakers on Mavericks

    Hi, I wonder if somebody has compatibility issues of new MacBook Pro Retina (late 2013) and Bose Companion 5 USB speakers? They work fine on a left USB port on my MacBook Pro, but doesn't work at all on a right one: USB speakers are not recognised or if recognised as "Uknown Audio Device", they doesn't work any way and iTunes stops playing till I take USB cable out.
    I tested them already on two identical machines - the same issue: left USB port works fine, right one - not.
    While comparing, I tested this audio device also with other MacBooks:
    MacBook Pro 15" 2008 (Mavericks) - both USB ports work fine
    MacBook 13" 2010 (Mountain Lion) - both USB ports work fine
    MacBook Pro 13" Retina early 2013 (Mavericks) - both USB ports work fine
    So it is somehow related exactly to the MacBook Pro Retina 15" Retina late 2013 with Maverics. I guess some sound card and USB port communication issue. Does any body exeriences such problems as well?

    Hi,
    Im having USB problems with storage devices and android phone connections
    Thanks

  • L'affichage tremble lorsque je fais défiler une page. Macbook Pro retina late 2013.

    pour les textes et les images. Ce n'est pas un lag, je pense, c'est comme si l'écran tremblait comme de la jelly anglaise. A vrai dire c'est assez insupportable, surtout pour un MacBook Pro retina late 2013 à 2700 €. Autant sur safari que sur firefox, apercu, iphoto, tout. L'écran TREMBLE. Il ne lague pas.  A part ça l'ordinateur fonctionne très bien, hyper rapide. Malgrès tout ce qu'il y a dedans, l'écran TREMBLE. C'est affreux.
    intel core i7 2.6GHz
    16 Go de memoire
    Intel Iris Pro 1Gb + NVidia GeForce GT750M 2Gb
    écran rétina 15"
    Si quelqu'un a une solution, si apple peut m'expliquer, ça me ferai plaisir. Merci, salut !

    Bonjour,
    je suis tombé par hasard sur ton post à propos du problème de trackpad qui se mettrait comme en veille au bout de 5 secondes. J'ai moi-même constaté le problème sur mon macbook pro 13" 2014 Retina que je viens d'acheter. Je suis retourné à la Fnac où je l'ai acheté et les 2 deux mac en démo ont également le même soucis, le 1er est un macbook 13 de 2013 non Retina et le 2ème est le même que le mien. J'en suis arrivé à la conclusion que se n'est finalement pas un problème mais plutôt comme une mise en veille du trackpad pour économiser de la batterie lorsque l'on ne touche plus la souris.
    J'ai essayé de brancher un appareil sur le port usb comme tu l'avais dit pour faire disparaitre la chose et ça marche aussi chez moi.
    est-ce que tu as du nouveau à ce sujet ? vu que ton post date du mois d'Aout.
    A bientot
    Laurent

  • High CPU utilization on MacBook Pro Retina (Late 2013)

    Changed from an iMac (high end - mid 2011) to a MacBook Pro retina (late 2013).
    2,3ghz, 16GB Ram, 500gb ssd
    using LR 5.5 CC with 55.000 pictures.
    Now when using LR, CPU runs with 200-280% and the fans are very noisy (activity app - LR uses 200-280%)
    Lr  Database on SSD - Pictures on external HDD (USB 3).
    All Smartprevies are rendered.
    Only browsing the pictures let let the Fan Run.
    Any ideas ?
    thank You all
    boris

    with a quad core prozessor unit (i7 intell) - there a maximum 800% available.
    4 cores - each virtual double used (or so).
    I only brows thru a file ... scroll down ... at thumbnail view ... and seconds later ... cpu is very busy.
    When i'll render new previews .. i think it's okay ... but not at simple picture viewing.
    On my iMac ( 16GB, 256 SSD, i7 ) there was no problem such this.
    i transferred the catalog from my imac to the macbook ...

Maybe you are looking for

  • VGA cable no longer working with IOS8

    VGA cable that I have (that used to always work), no longer works with ANY projector.  Either get zero recognition or popup saying it "doesn't support that application".  It is an Apple VGA cable.  Thoughts?  Thank you....

  • How to drill down from summary report to detail report using RRI?

    Dear all:   A problem about RRI. Please help me!   1.I create a BEx query 'Q1' to show summary data.   2.I create a BEx query 'Q2' to show detail data.   3.In Q1, all the products are shown each row.        The 1st coulmn is 'Balance in the begin', i

  • Why can't I connect to my home secured wifi after updating to iOS 6?

    After upgrading to iOS 6 it will not let me connect to my secured home network. A "Log In" window pops with a message that says "Hmm that page doesn't exist" what's going on?

  • License Probelm  Fail over node.

    Dear Gurus, I am reciving an error while applying the liscense to the fail over server. SAPLICENSE (Release 700) ERROR *** ERROR: Can not set DbSl trace function DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20 RC-INFO: error lo

  • While installing OBIEE on linux box

    Hi, while installing OBIEE on linux box i am getting below error ./setup.sh Unable to load the launcher file index. Cannot open launcher file. can any one let me know how to reslove this issue... Regards Venkata