Logitech Marble Mouse scrollwheel emulation
Before I open a Wiki account*, can anyone else confirm that it only works over USB?
I can't remember how long I've had this thing, and I even have a vague feeling I came up against this problem before I installed Arch, but I always assumed I must have a defective trackball. Or an early model that doesn't support it. Or something. Such as I was doing it wrong, which was by far the most likely, and in fact turned out to be the case.
Probably. Because it's just possible that I do have a defective PS/2 adaptor, so I'd like some corroboration.
*I know; eight years and I never got around to it.
Have you installed the latest Logitech Control Center .
The support page says posted 4/11/06. Maybe try that.
iMac G5-2.1-1.5G/miniStackV2-320GB FW-USB Ex.HD/Netgear WGR 614 Mac OS X (10.4.7) iPod 60GB Photo/Epson Stylus Photo RX620/Kodak P880/Fuji S7000
Similar Messages
-
i am already on my second mighty mouse. the first had to be replaced under warranty. my second mouse has had issues that cleaning wont help so i am going to buy something completely different. i am considering the logitech marble mouse. i like the fact it has a huge ball. (not that size counts!) has anyone here tried this mouse and would mind leaving a quick review. THANKS!!!
i received it already and i am never going back to the unmighty mouse. i stupidly took awhile before i realized i had to go to logitech and download the ability to customize it. sometimes i am not too swift but now it works fine. i am already noticing less strain on my wrist. bigger IS better!
-
Logitech Marble Mouse - Control Center
Hi,
I recently updated my OS to 10.4.7, and while I've had some recent activity with different mice, I went back to the Logitech Marble Mouse and Control Center, and found the Control Center stopped recognizing the unit. I've tried to remove it via the un-installer and no dice. I also installed SteerMouse, but that will end up costing me $20... I also tried USB Overdrive, and it doesn't seem to work.
Can Anyone recommend any steps to get Control Center back working? The Logitech form seems hard to find any relevant info.
Thanks!
Adam
G5 Dual 1.8/2G Ram Mac OS X (10.4.7) Logic Pro 7.2,1, 828MkII, UAD-1, Radikal SAC 2KHave you installed the latest Logitech Control Center .
The support page says posted 4/11/06. Maybe try that.
iMac G5-2.1-1.5G/miniStackV2-320GB FW-USB Ex.HD/Netgear WGR 614 Mac OS X (10.4.7) iPod 60GB Photo/Epson Stylus Photo RX620/Kodak P880/Fuji S7000 -
[SOLVED] Logitech Marble Mouse: can't enable custom mapping
I followed the wiki page:
Logitech_Marble_Mouse
My mouse works, but I can't get custom mappings to work.
Here's my /etc/X11/xorg.conf.d/10-evdev.conf,
to me it looks like it does ignore the Marble settings.
What am I missing?
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "latam"
EndSection
Section "InputClass"
Identifier "Marble Mouse"
MatchProduct "Logitech USB Trackball"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
# Physical button #s: A b D - - - - B C b = A & D simultaneously; - = no button
Option "ButtonMapping" "1 8 3 4 5 6 7 2 2" # For right-hand placement
# Option "ButtonMapping" "3 8 1 4 5 6 7 2 2" # For left-hand placement
# EmulateWheel refers to emulating a mouse wheel using Marble Mouse trackball.
Option "EmulateWheel" "true"
# Option "EmulateWheelButton" "8" # Factory default; use "9" for left-side placement.
Option "EmulateWheelButton" "8"
# EmulateWheelInertia specifies how far (in pixels) the pointer must move to
# generate button press/release events in wheel emulation mode.
Option "EmulateWheelInertia" "10" # Factory default: 50
Option "ZAxisMapping" "4 5"
Option "XAxisMapping" "6 7" # Disable this for vertical-only scrolling.
# Emulate3Buttons refers to the act of pressing buttons A and D
# simultaneously to emulate a middle-click or wheel click.
Option "Emulate3Buttons" "true"
# Option "Emulate3Buttons" "true" # Factory default.
EndSection
Last edited by phonky (2014-04-29 17:05:21)Found the solution:
I had to comment out the MatchProduct line;
I assume the wiki page had been done with a different product. -
Logitech Marble Mouse and Xorg 1.8
With the update to xorg 1.8, fdi files in /etc/hal/fdi/policy are no longer being used.
I created a workaround for my Marble Mouse by creating a file named /etc/X11/xorg.conf.d/10-marblemouse.conf
Then I added the following cote to it:
Section "InputClass"
Identifier "Marble Mouse"
MatchProduct "Logitech USB Trackball"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "ButtonMapping" "1 9 3 4 5 6 7 8 2"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "8"
Option "ZAxisMapping" "4 5"
Option "XAxisMapping" "6 7"
Option "Emulate3Buttons" "false"
EndSection
I know the xorg.conf.d directory should be left for .conf snippets from the distro maintainers. I hope the above helps someone get their Marble Mouse working.
Now that I have it working as a snippet I'm going to try making the change to xorg.conf and see if that works.Perhaps a bit off-topic though on the topic of trackballs... My Kensington Expert Mouse worked nicely in Xorg 1.8 without configuration. The only problem was that I prefer the two upper buttons reversed. Here is the xorg.conf section for configuring it:
Section "InputClass"
Identifier "Kensington Expert Mouse"
Driver "evdev"
MatchIsPointer "on"
MatchProduct "Kensington Expert Mouse"
MatchVendor "Kensington"
MatchDevicePath "/dev/input/event*"
Option "CorePointer"
# Upper buttons: left=browser back, right=middle click
Option "ButtonMapping" "1 8 3 4 5 6 7 2"
EndSection
Last edited by wulax (2010-06-22 09:33:17) -
Hello
1st thing are there any Logi Marble mouse owners? If so I could do with some help.
Hey there's some great custom functions on this and it's a MM beater no doubt but one thing I could do with the MM is when on a web page I could just scroll down with the centre button to the top/bottom and back up you get the idea ,anyway how do i do it with the Logi MM as the only way I can find is by grabbing the blue bar on the left and then scroll up/down .,anyway any other methods or is that it?\
All the bestHave you installed the latest Logitech Control Center .
The support page says posted 4/11/06. Maybe try that.
iMac G5-2.1-1.5G/miniStackV2-320GB FW-USB Ex.HD/Netgear WGR 614 Mac OS X (10.4.7) iPod 60GB Photo/Epson Stylus Photo RX620/Kodak P880/Fuji S7000 -
HOWTO: Get a logitech marble mouse to work w/scroll and more
This bit of information was taken from a post at the ubuntu forums. It worked for me, enjoy!
Modify your Xorg.conf/XF86Config file to have this in the mouse section:
Section "InputDevice"
Identifier "MarbleMouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ButtonMapping" "1 8 3 6 7"
Option "EmulateWheel" "true"
Option "EmulateWheelTimeout" "300" # msec
Option "EmulateWheelButton" "6"
Option "YAxisMapping" "4 5"
EndSection
here is the exact post on the ubuntu forums.
http://ubuntuforums.org/showpost.php?p= … stcount=21Hotplugging now automatically sets up the small buttons as forward/back. Put an fdi in /etc/hal/fdi/policy as the wiki states, but after restarting hal and xorg only the left and right mouse buttons work. Tried replacing "Logitech USB Trackball" with "ImExPS/2 Logitech Explorer Mouse" for the hell of it, no change. Any ideas?
<deviceinfo version="0.2">
<device>
<match key="info.product" string="Logitech USB Trackball">
<merge key="input.x11_options.EmulateWheel" type="string">true</merge>
<merge key="input.x11_options.EmulateWheelTimeout" type="string">200</merge>
<merge key="input.x11_options.EmulateWheelButton" type="string">9</merge>
<merge key="input.x11_options.XAxisMapping" type="string">6 7</merge>
<merge key="input.x11_options.YAxisMapping" type="string">4 5</merge>
<merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
</match>
</device>
</deviceinfo> -
Ubuntu Natty Narwhal 11.04
Logitech Marble Trackball MouseThere actually is a wiki entry that points to Delightfully's posts on his blog. Honestly, I've never edited a wiki and I wasn't sure if I'd be stepping on someone else's wiki-toes (so to speak). If there is interest in that, though, I'll learn to edit a wiki and add it.
Last edited by MoonSwan (2014-06-22 21:21:10) -
Trackpad and Logitech Marble Mouse
I have to deactivate "ignore trackpad when mouse is present" to use my trackpad because even though I unplug my mouse, the computer seems to think my mouse i still plugged in... anybody have the same problem or knows how to fix this?
thanks a lot!!!turns out it was a one-day glitch. works fine now.
-
Oct 25, 26 or 27 both Adobe Acrobat and Mozilla Firefox alerted me they had updates to install. Since I trust them both I installed them. However, since then my optical marble mouse from Logitech acted strangely different. The cursor did not move as usual. It didn't respond right. I thought it might have needed the dust wiped out, so I did that. It still acted sluggish when I tried to move it, it was as though it was "spinning its wheels" not going anywhere. I went to the Control Panel clicked on Mouse, and proceeded to look at the settings and set them to default. I then tried to use the universal scroll by clicking the two big buttons which showed a circle with cross hair arrows as usual. When the marble was moved forward or backward, the scroll had always been smooth allowing one to read the screen evenly and without holding any button down. Now it was jerky. Is this a problem from the last update? My version of Firefox is 3.6.12
Thank youI am happy to see another person is having this jerky scroll situation with the latest update to Firefox on October 27. I did check my I.E browser and '''THAT BROWSER''' still does the nice smooth scroll....let's get 'er fixed Mozilla! I know you can!
-
Problem with using mouse scrollwheel within CS5?
Hey all. Just upgraded my PS from CS3 to CS5, and I seem to be running into issues with the scrollwheel on my mouse.
When trying to use it from inside CS5 (say, inside a long 'Open...' window), it seems to lock up the entirety of Photoshop for a moment or two every few seconds. Checking the net out there, it looks like there appeared to be a problem with mouse wheels, but that was supposedly fixed nearly a year ago.
I checked for any updates or patches, but the most recent update I can see on the Adobe site is to 12.0.4, which has me doubly confused, as my copy of CS5 say that it is version 12.1, which, theoretically, is a more recent copy...?
I can provide system info, etc. if needed, but since I have not found anything along these lines since a year ago, I'm guessing there's probably some simple thing I'm missing somewhere.
Thanks in advance,
Steve MYou mean Photoshop plugins? No, the version of CS5 I'm having issues with is fresh as a daisy, just digitally downloaded and run for the first time earlier today. I think my old copy of CS3 has some, however, although since they are not being loaded into CS5 (presumably) I'm guessing those wouldn't be the culprit. If this helps any:
Model Name: Mac Pro
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
L2 Cache (per processor): 12 MB
Memory: 4 GB
System Version: Mac OS X 10.5.8 (9L30)
I'm using a Logitech Performance Mouse MX.
Thanks,
Steve M -
Touchpad detected as PS/2 Logitech Wheel Mouse
Hi,
The touchpad on my Asus U46SV laptop is being detected as a PS/2 Logitech Wheel Mouse. Therefore no touchpad driver is loaded and all fancy features (two-finger scrolling, disable while typing, etc) are unavailable. How can I fix this?
$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ PS/2 Logitech Wheel Mouse id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ ASUS USB2.0 WebCam id=10 [slave keyboard (3)]
↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
[ 0.000000] Command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000aabcc000 (usable)
[ 0.000000] BIOS-e820: 00000000aabcc000 - 00000000aacdf000 (reserved)
[ 0.000000] BIOS-e820: 00000000aacdf000 - 00000000aace1000 (usable)
[ 0.000000] BIOS-e820: 00000000aace1000 - 00000000aacf4000 (reserved)
[ 0.000000] BIOS-e820: 00000000aacf4000 - 00000000aacf5000 (usable)
[ 0.000000] BIOS-e820: 00000000aacf5000 - 00000000aade8000 (reserved)
[ 0.000000] BIOS-e820: 00000000aade8000 - 00000000aaf19000 (usable)
[ 0.000000] BIOS-e820: 00000000aaf19000 - 00000000aafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aafe8000 - 00000000aaffd000 (usable)
[ 0.000000] BIOS-e820: 00000000aaffd000 - 00000000ab000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ab000000 - 00000000afa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000014fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. U46SV/U46SV, BIOS U46SV.203 06/09/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0A8000000 mask FFC000000 write-back
[ 0.000000] 4 base 0AB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 140000000 mask FF0000000 write-back
[ 0.000000] 7 base 14FE00000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000ab000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xaaffd max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcc70] fcc70
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000aaffd000
[ 0.000000] 0000000000 - 00aae00000 page 2M
[ 0.000000] 00aae00000 - 00aaffd000 page 4k
[ 0.000000] kernel direct mapping tables up to aaffd000 @ aaff8000-aaffd000
[ 0.000000] init_memory_mapping: 0000000100000000-000000014fe00000
[ 0.000000] 0100000000 - 014fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 14fe00000 @ 14fdf9000-14fe00000
[ 0.000000] RAMDISK: 1fda0000 - 1fff0000
[ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000aaffee18 00074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000aaf9bd98 000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xAAFE5E40/0x00000000AAFE5D40, using 32 (20110413/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000aaf7c018 0DC69 (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000aafe5e40 00040
[ 0.000000] ACPI: APIC 00000000aaffdf18 000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000aafe6d18 00038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
[ 0.000000] ACPI: ECDT 00000000aafe5b18 000C1 (v01 _ASUS_ NoteBook 06222004 AMI 00000000)
[ 0.000000] ACPI: MCFG 00000000aafe6c98 0003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000aaf7b818 00799 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000aaf7a018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000aaf9cc18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
[ 0.000000] ACPI: SSDT 00000000aaf5ea98 002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: ASF! 00000000aafe5a18 000A0 (v32 INTEL HCG568D 00000001 MSFT 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000014fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000014fe00000
[ 0.000000] NODE_DATA [000000014fdfb000 - 000000014fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014b400000-ffff88014edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0014fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000aabcc
[ 0.000000] 0: 0x000aacdf -> 0x000aace1
[ 0.000000] 0: 0x000aacf4 -> 0x000aacf5
[ 0.000000] 0: 0x000aade8 -> 0x000aaf19
[ 0.000000] 0: 0x000aafe8 -> 0x000aaffd
[ 0.000000] 0: 0x00100000 -> 0x0014fe00
[ 0.000000] On node 0 totalpages: 1025699
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 680269 pages, LIFO batch:31
[ 0.000000] Normal zone: 4473 pages used for memmap
[ 0.000000] Normal zone: 322695 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000aabcc000 - 00000000aacdf000
[ 0.000000] PM: Registered nosave memory: 00000000aace1000 - 00000000aacf4000
[ 0.000000] PM: Registered nosave memory: 00000000aacf5000 - 00000000aade8000
[ 0.000000] PM: Registered nosave memory: 00000000aaf19000 - 00000000aafe8000
[ 0.000000] PM: Registered nosave memory: 00000000aaffd000 - 00000000ab000000
[ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
[ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
[ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:30600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014fa00000 s78464 r8192 d23936 u131072
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006885
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3963540k/5502976k available (4064k kernel code, 1400180k absent, 139256k reserved, 3304k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2294.473 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.15 BogoMIPS (lpj=7648243)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000118] Security Framework initialized
[ 0.000122] AppArmor: AppArmor disabled by boot time parameter
[ 0.000492] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001691] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002141] Mount-cache hash table entries: 256
[ 0.002461] Initializing cgroup subsys cpuacct
[ 0.002487] Initializing cgroup subsys memory
[ 0.002502] Initializing cgroup subsys devices
[ 0.002504] Initializing cgroup subsys freezer
[ 0.002505] Initializing cgroup subsys net_cls
[ 0.002507] Initializing cgroup subsys blkio
[ 0.002553] CPU: Physical Processor ID: 0
[ 0.002555] CPU: Processor Core ID: 0
[ 0.002560] mce: CPU supports 7 MCE banks
[ 0.002572] CPU0: Thermal monitoring enabled (TM1)
[ 0.002578] using mwait in idle threads.
[ 0.003714] ACPI: Core revision 20110413
[ 0.160380] ftrace: allocating 16144 entries in 64 pages
[ 0.167075] Switched APIC routing to physical flat.
[ 0.167426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.200410] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
[ 0.304675] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.304681] ... version: 3
[ 0.304682] ... bit width: 48
[ 0.304683] ... generic registers: 4
[ 0.304685] ... value mask: 0000ffffffffffff
[ 0.304686] ... max period: 000000007fffffff
[ 0.304687] ... fixed-purpose events: 3
[ 0.304688] ... event mask: 000000070000000f
[ 0.324897] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.351341] Booting Node 0, Processors #1
[ 0.351348] smpboot cpu 1: start_ip = 99000
[ 0.464652] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.484623] #2
[ 0.484627] smpboot cpu 2: start_ip = 99000
[ 0.597913] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.617876] #3
[ 0.617880] smpboot cpu 3: start_ip = 99000
[ 0.741252] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.747769] Brought up 4 CPUs
[ 0.747775] Total of 4 processors activated (18364.91 BogoMIPS).
[ 0.750911] devtmpfs: initialized
[ 0.751676] PM: Registering ACPI NVS region at aaf19000 (847872 bytes)
[ 0.752391] print_constraints: dummy:
[ 0.752459] NET: Registered protocol family 16
[ 0.752545] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.752547] ACPI: bus type pci registered
[ 0.752684] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.752687] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.768153] PCI: Using configuration type 1 for base access
[ 0.768569] bio: create slab <bio-0> at 0
[ 0.770460] ACPI: EC: EC description table is found, configuring boot EC
[ 0.770465] ACPI: EC: Look up EC in DSDT
[ 0.772328] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.784480] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.854764] ACPI: SSDT 00000000aadbc718 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.855208] ACPI: Dynamic OEM Table Load:
[ 0.855210] ACPI: SSDT (null) 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.864674] ACPI: SSDT 00000000aadbda98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.865144] ACPI: Dynamic OEM Table Load:
[ 0.865146] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.874544] ACPI: SSDT 00000000aadbbd98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.874985] ACPI: Dynamic OEM Table Load:
[ 0.874987] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.894586] ACPI: Interpreter enabled
[ 0.894589] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.894611] ACPI: Using IOAPIC for interrupt routing
[ 0.999159] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.999351] ACPI: No dock devices found.
[ 0.999352] HEST: Table not found.
[ 0.999355] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.999558] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.999930] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.999932] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.999934] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.999936] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.999938] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.999940] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.999942] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.999944] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.999946] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.999948] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
[ 0.999950] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.999961] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.999994] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 1.000018] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.000021] pci 0000:00:01.0: PME# disabled
[ 1.000038] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[ 1.000048] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit]
[ 1.000055] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.000059] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f]
[ 1.000109] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.000132] pci 0000:00:16.0: reg 10: [mem 0xdf00b000-0xdf00b00f 64bit]
[ 1.000195] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.000200] pci 0000:00:16.0: PME# disabled
[ 1.000231] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.000253] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff]
[ 1.000326] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.000331] pci 0000:00:1a.0: PME# disabled
[ 1.000355] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 1.000371] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
[ 1.000426] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.000430] pci 0000:00:1b.0: PME# disabled
[ 1.000450] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.000513] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.000517] pci 0000:00:1c.0: PME# disabled
[ 1.000540] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 1.000603] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.000607] pci 0000:00:1c.1: PME# disabled
[ 1.000632] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 1.000695] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.000699] pci 0000:00:1c.3: PME# disabled
[ 1.000723] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 1.000785] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.000789] pci 0000:00:1c.5: PME# disabled
[ 1.000819] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.000841] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff]
[ 1.000914] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.000919] pci 0000:00:1d.0: PME# disabled
[ 1.000944] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[ 1.001066] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 1.001085] pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7]
[ 1.001094] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3]
[ 1.001102] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097]
[ 1.001111] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083]
[ 1.001119] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f]
[ 1.001128] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff]
[ 1.001161] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.001165] pci 0000:00:1f.2: PME# disabled
[ 1.001183] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.001199] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
[ 1.001220] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f]
[ 1.001276] pci 0000:01:00.0: [10de:0df4] type 0 class 0x000300
[ 1.001284] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff]
[ 1.001292] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.001301] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 1.001308] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
[ 1.001314] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
[ 1.001346] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.001348] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.001351] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 1.001354] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.001399] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.001403] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.001407] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
[ 1.001414] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
[ 1.001480] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[ 1.001508] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit]
[ 1.001612] pci 0000:03:00.0: supports D1
[ 1.001614] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 1.001619] pci 0000:03:00.0: PME# disabled
[ 1.001657] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.001662] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.001666] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
[ 1.001672] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
[ 1.001743] pci 0000:04:00.0: [1b73:1000] type 0 class 0x000c03
[ 1.001766] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff]
[ 1.001908] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 1.001914] pci 0000:04:00.0: PME# disabled
[ 1.001944] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.001948] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
[ 1.001952] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
[ 1.001959] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
[ 1.002025] pci 0000:05:00.0: [1969:1083] type 0 class 0x000200
[ 1.002053] pci 0000:05:00.0: reg 10: [mem 0xdc800000-0xdc83ffff 64bit]
[ 1.002068] pci 0000:05:00.0: reg 18: [io 0x9000-0x907f]
[ 1.002166] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.002171] pci 0000:05:00.0: PME# disabled
[ 1.002210] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 1.002214] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.002219] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
[ 1.002225] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[ 1.002249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.002373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.002402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.002435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.002467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.002510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGR._PRT]
[ 1.002545] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.002548] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.002549] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.700980] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.701022] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[ 1.701063] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.701104] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.701146] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.701186] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.701226] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 1.701264] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[ 1.701338] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.701345] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.701347] vgaarb: loaded
[ 1.701348] vgaarb: bridge control possible 0000:01:00.0
[ 1.701349] vgaarb: bridge control possible 0000:00:02.0
[ 1.701410] PCI: Using ACPI for IRQ routing
[ 1.702943] PCI: pci_cache_line_size set to 64 bytes
[ 1.703021] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 1.703024] reserve RAM buffer: 00000000aabcc000 - 00000000abffffff
[ 1.703027] reserve RAM buffer: 00000000aace1000 - 00000000abffffff
[ 1.703029] reserve RAM buffer: 00000000aacf5000 - 00000000abffffff
[ 1.703031] reserve RAM buffer: 00000000aaf19000 - 00000000abffffff
[ 1.703033] reserve RAM buffer: 00000000aaffd000 - 00000000abffffff
[ 1.703035] reserve RAM buffer: 000000014fe00000 - 000000014fffffff
[ 1.703130] NetLabel: Initializing
[ 1.703131] NetLabel: domain hash size = 128
[ 1.703132] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.703144] NetLabel: unlabeled traffic allowed by default
[ 1.703158] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.703163] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.705180] Switching to clocksource hpet
[ 1.707228] Switched to NOHz mode on CPU #0
[ 1.707282] Switched to NOHz mode on CPU #1
[ 1.707289] Switched to NOHz mode on CPU #2
[ 1.707371] Switched to NOHz mode on CPU #3
[ 1.709995] pnp: PnP ACPI init
[ 1.710009] ACPI: bus type pnp registered
[ 1.710231] pnp 00:00: [bus 00-3e]
[ 1.710233] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.710235] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.710236] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.710238] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.710240] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.710242] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.710243] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.710245] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.710247] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.710248] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.710250] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.710252] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.710253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.710255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.710257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.710258] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.710260] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.710262] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[ 1.710264] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.710335] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.710347] pnp 00:01: [io 0x0000-0x001f]
[ 1.710349] pnp 00:01: [io 0x0081-0x0091]
[ 1.710350] pnp 00:01: [io 0x0093-0x009f]
[ 1.710351] pnp 00:01: [io 0x00c0-0x00df]
[ 1.710353] pnp 00:01: [dma 4]
[ 1.710371] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.710378] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.710395] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.710466] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.710484] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.710493] pnp 00:04: [io 0x00f0]
[ 1.710501] pnp 00:04: [irq 13]
[ 1.710519] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.710528] pnp 00:05: [io 0x002e-0x002f]
[ 1.710530] pnp 00:05: [io 0x004e-0x004f]
[ 1.710531] pnp 00:05: [io 0x0061]
[ 1.710533] pnp 00:05: [io 0x0063]
[ 1.710534] pnp 00:05: [io 0x0065]
[ 1.710535] pnp 00:05: [io 0x0067]
[ 1.710536] pnp 00:05: [io 0x0070]
[ 1.710538] pnp 00:05: [io 0x0080]
[ 1.710539] pnp 00:05: [io 0x0092]
[ 1.710542] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.710544] pnp 00:05: [io 0x0680-0x069f]
[ 1.710545] pnp 00:05: [io 0x1000-0x100f]
[ 1.710546] pnp 00:05: [io 0xffff]
[ 1.710548] pnp 00:05: [io 0xffff]
[ 1.710549] pnp 00:05: [io 0x0400-0x0453]
[ 1.710550] pnp 00:05: [io 0x0458-0x047f]
[ 1.710552] pnp 00:05: [io 0x0500-0x057f]
[ 1.710553] pnp 00:05: [io 0x164e-0x164f]
[ 1.710595] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.710598] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.710600] system 00:05: [io 0xffff] has been reserved
[ 1.710601] system 00:05: [io 0xffff] has been reserved
[ 1.710603] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.710605] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.710607] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.710609] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.710612] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.710619] pnp 00:06: [io 0x0070-0x0077]
[ 1.710624] pnp 00:06: [irq 8]
[ 1.710642] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.710658] pnp 00:07: [io 0x0454-0x0457]
[ 1.710686] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.710689] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.710714] pnp 00:08: [io 0x0060]
[ 1.710716] pnp 00:08: [io 0x0064]
[ 1.710721] pnp 00:08: [irq 1]
[ 1.710741] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.710775] pnp 00:09: [irq 12]
[ 1.710798] pnp 00:09: Plug and Play ACPI device, IDs ETD0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 1.758811] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.758813] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 1.758814] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.758816] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.758817] pnp 00:0a: [mem 0xe0000000-0xe3ffffff]
[ 1.758819] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.758820] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 1.758822] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 1.758824] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.758825] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.758827] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
[ 1.758884] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.758887] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 1.758889] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.758891] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.758893] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 1.758895] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.758897] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.758900] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.758902] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.758904] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.758906] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
[ 1.758909] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.758934] pnp 00:0b: [mem 0xafa00000-0xafa00fff]
[ 1.758981] system 00:0b: [mem 0xafa00000-0xafa00fff] has been reserved
[ 1.758984] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.759078] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 1.759080] pnp 00:0c: [mem 0x40000000-0x401fffff]
[ 1.759131] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[ 1.759133] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[ 1.759136] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.759147] pnp: PnP ACPI: found 13 devices
[ 1.759148] ACPI: ACPI bus type pnp unregistered
[ 1.764848] PCI: max bus depth: 1 pci_try_num: 2
[ 1.764884] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.764886] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.764889] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 1.764892] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.764896] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.764899] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.764905] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
[ 1.764909] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
[ 1.764916] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.764919] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.764925] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
[ 1.764929] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
[ 1.764936] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.764939] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
[ 1.764944] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
[ 1.764949] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
[ 1.764956] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 1.764959] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.764964] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
[ 1.764969] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[ 1.764983] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.764986] pci 0000:00:01.0: setting latency timer to 64
[ 1.764993] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.764997] pci 0000:00:1c.0: setting latency timer to 64
[ 1.765005] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.765010] pci 0000:00:1c.1: setting latency timer to 64
[ 1.765018] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.765022] pci 0000:00:1c.3: setting latency timer to 64
[ 1.765028] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.765033] pci 0000:00:1c.5: setting latency timer to 64
[ 1.765037] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.765039] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.765041] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.765042] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.765044] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.765046] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.765048] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.765050] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.765051] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.765053] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
[ 1.765055] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.765057] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.765059] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
[ 1.765061] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.765063] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.765064] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
[ 1.765066] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
[ 1.765068] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.765070] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
[ 1.765072] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
[ 1.765074] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 1.765076] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
[ 1.765078] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
[ 1.765080] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 1.765081] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
[ 1.765083] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
[ 1.765138] NET: Registered protocol family 2
[ 1.765319] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.766220] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.767965] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.768183] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.768185] TCP reno registered
[ 1.768194] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.768216] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.768449] NET: Registered protocol family 1
[ 1.768464] pci 0000:00:02.0: Boot video device
[ 2.015314] PCI: CLS 64 bytes, default 64
[ 2.015352] Unpacking initramfs...
[ 2.047361] Freeing initrd memory: 2368k freed
[ 2.047653] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.047657] Placing 64MB software IO TLB between ffff8800a6bcc000 - ffff8800aabcc000
[ 2.047658] software IO TLB at phys 0xa6bcc000 - 0xaabcc000
[ 2.048060] audit: initializing netlink socket (disabled)
[ 2.048068] type=2000 audit(1313603670.739:1): initialized
[ 2.054235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.067195] VFS: Disk quotas dquot_6.5.2
[ 2.067311] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.067454] msgmni has been set to 7745
[ 2.067640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.067672] io scheduler noop registered
[ 2.067674] io scheduler deadline registered
[ 2.067711] io scheduler cfq registered (default)
[ 2.067791] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.067814] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.068084] intel_idle: MWAIT substates: 0x21120
[ 2.068086] intel_idle: v0.4 model 0x2A
[ 2.068087] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.068117] ERST: Table is not found!
[ 2.068163] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.268759] Linux agpgart interface v0.103
[ 2.268839] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.270529] i8042: Detected active multiplexing controller, rev 1.1
[ 2.271297] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.271322] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.271339] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.271357] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.271374] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.271436] mousedev: PS/2 mouse device common for all mice
[ 2.271488] rtc_cmos 00:06: RTC can wake from S4
[ 2.271585] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.271612] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.271729] cpuidle: using governor ladder
[ 2.271883] cpuidle: using governor menu
[ 2.272040] TCP cubic registered
[ 2.272042] NET: Registered protocol family 17
[ 2.272048] Registering the dns_resolver key type
[ 2.272116] PM: Hibernation image not present or could not be loaded.
[ 2.272120] registered taskstats version 1
[ 2.278319] rtc_cmos 00:06: setting system clock to 2011-08-17 17:54:31 UTC (1313603671)
[ 2.278398] Initializing network drop monitor service
[ 2.279674] Freeing unused kernel memory: 712k freed
[ 2.279759] Write protecting the kernel read-only data: 6144k
[ 2.279988] Freeing unused kernel memory: 12k freed
[ 2.282266] Freeing unused kernel memory: 776k freed
[ 2.291723] udevd[55]: starting version 173
[ 2.304579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.339771] usbcore: registered new interface driver usbfs
[ 2.339795] usbcore: registered new interface driver hub
[ 2.341676] usbcore: registered new device driver usb
[ 2.342076] SCSI subsystem initialized
[ 2.346410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.346435] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.346439] libata version 3.00 loaded.
[ 2.346468] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.346474] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.346533] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.346567] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.350464] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.350482] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
[ 2.361641] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.361880] hub 1-0:1.0: USB hub found
[ 2.361885] hub 1-0:1.0: 2 ports detected
[ 2.361969] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.362000] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.362005] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.362014] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.362042] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.363294] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.363343] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 2.363348] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.363358] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 2.365933] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.365956] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
[ 2.378294] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.378444] hub 2-0:1.0: USB hub found
[ 2.378448] hub 2-0:1.0: 2 ports detected
[ 2.378553] ahci 0000:00:1f.2: version 3.0
[ 2.378566] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.378706] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.378982] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 2.378987] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 2.378993] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.385587] scsi0 : ahci
[ 2.385700] scsi1 : ahci
[ 2.385786] scsi2 : ahci
[ 2.385871] scsi3 : ahci
[ 2.385959] scsi4 : ahci
[ 2.386043] scsi5 : ahci
[ 2.386296] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 41
[ 2.386298] ata2: DUMMY
[ 2.386302] ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 41
[ 2.386303] ata4: DUMMY
[ 2.386304] ata5: DUMMY
[ 2.386305] ata6: DUMMY
[ 2.499498] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
[ 2.499623] xHCI xhci_add_endpoint called for root hub
[ 2.499625] xHCI xhci_check_bandwidth called for root hub
[ 2.499650] hub 3-0:1.0: USB hub found
[ 2.499655] hub 3-0:1.0: 1 port detected
[ 2.499701] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.499707] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 2.499773] xHCI xhci_add_endpoint called for root hub
[ 2.499775] xHCI xhci_check_bandwidth called for root hub
[ 2.499793] hub 4-0:1.0: USB hub found
[ 2.499799] hub 4-0:1.0: 1 port detected
[ 2.668242] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.704896] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.704948] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.706090] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.706102] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.706110] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.706942] ata1.00: ATA-8: ST9500423AS, 0002SDM1, max UDMA/133
[ 2.706951] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.708085] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.708096] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.708128] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.708250] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.708253] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.708256] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.708955] ata1.00: configured for UDMA/133
[ 2.709184] scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
[ 2.710001] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2ASW, 1.00, max UDMA/100
[ 2.713629] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.713640] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.713648] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.715460] ata3.00: configured for UDMA/100
[ 2.721215] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A2ASW 1.00 PQ: 0 ANSI: 5
[ 2.726730] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.726735] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.726769] sd 0:0:0:0: [sda] Write Protect is off
[ 2.726772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.726796] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.730604] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.730613] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.730825] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.744374] sda: sda1 sda2 sda3 sda4
[ 2.744800] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.792361] hub 1-1:1.0: USB hub found
[ 2.792438] hub 1-1:1.0: 6 ports detected
[ 2.898039] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 3.022001] hub 2-1:1.0: USB hub found
[ 3.022058] hub 2-1:1.0: 6 ports detected
[ 3.047955] Refined TSC clocksource calibration: 2294.788 MHz.
[ 3.047965] Switching to clocksource tsc
[ 3.088035] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
[ 3.154812] usb 1-1.1: device descriptor read/64, error -32
[ 3.236960] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 3.236965] PM: Marking nosave pages: 0000000020000000 - 0000000020200000
[ 3.236973] PM: Marking nosave pages: 0000000040000000 - 0000000040200000
[ 3.236982] PM: Marking nosave pages: 00000000aabcc000 - 00000000aacdf000
[ 3.236987] PM: Marking nosave pages: 00000000aace1000 - 00000000aacf4000
[ 3.236989] PM: Marking nosave pages: 00000000aacf5000 - 00000000aade8000
[ 3.236994] PM: Marking nosave pages: 00000000aaf19000 - 00000000aafe8000
[ 3.236998] PM: Marking nosave pages: 00000000aaffd000 - 0000000100000000
[ 3.238148] PM: Basic memory bitmaps created
[ 3.256065] PM: Basic memory bitmaps freed
[ 3.281008] EXT3-fs: barriers not enabled
[ 3.293754] kjournald starting. Commit interval 5 seconds
[ 3.293785] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 3.408060] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[ 4.495259] udevd[256]: starting version 173
[ 4.578020] ACPI: acpi_idle yielding to intel_idle
[ 4.627803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 4.627906] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.628446] ACPI: AC Adapter [AC0] (on-line)
[ 4.629029] ACPI: Lid Switch [LID]
[ 4.629597] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 4.629603] ACPI: Sleep Button [SLPB]
[ 4.629654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.629658] ACPI: Power Button [PWRF]
[ 4.662098] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.662105] ACPI: Battery Slot [BAT0] (battery present)
[ 4.670264] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.670270] ACPI: Thermal Zone [TZ00] (58 C)
[ 4.699183] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.699224] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 4.735002] wmi: Mapper loaded
[ 4.816453] cfg80211: Calling CRDA to update world regulatory domain
[ 4.837422] Linux media interface: v0.10
[ 4.865736] Linux video capture interface: v2.00
[ 4.900747] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
[ 4.903658] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[ 4.903716] usbcore: registered new interface driver uvcvideo
[ 4.903718] USB Video Class driver (v1.1.0)
[ 4.911301] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.911316] ath9k 0000:03:00.0: setting latency timer to 64
[ 4.919790] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.919846] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 4.919869] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.927271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.935157] asus_wmi: ASUS WMI generic driver loaded
[ 4.941164] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.943980] asus_wmi: Initialization: 0x1
[ 4.944133] asus_wmi: SFUN value: 0x1a0af7
[ 4.945199] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
[ 4.956683] asus_wmi: Backlight controlled by ACPI video driver
[ 4.956752] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.960798] ath: EEPROM regdomain: 0x60
[ 4.960800] ath: EEPROM indicates we should expect a direct regpair map
[ 4.960802] ath: Country alpha2 being used: 00
[ 4.960803] ath: Regpair used: 0x60
[ 4.974078] Bluetooth: Core ver 2.16
[ 4.974096] NET: Registered protocol family 31
[ 4.974097] Bluetooth: HCI device and connection manager initialized
[ 4.974098] Bluetooth: HCI socket layer initialized
[ 4.974099] Bluetooth: L2CAP socket layer initialized
[ 4.974302] Bluetooth: SCO socket layer initialized
[ 4.984561] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 4.984762] Registered led device: ath9k-phy0
[ 4.984768] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005360000, irq=17
[ 4.999019] iTCO_vendor_support: vendor-support=0
[ 5.000922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 5.000993] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 5.001120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.013874] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.014040] usbcore: registered new interface driver btusb
[ 5.026354] atl1c 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.026365] atl1c 0000:05:00.0: setting latency timer to 64
[ 5.140660] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
[ 5.493359] hda_codec: ALC269VB: BIOS auto-probing.
[ 5.525717] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
[ 5.528101] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.528163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.528222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.528376] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.528381] mei 0000:00:16.0: setting latency timer to 64
[ 5.535903] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.536243] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 5.536438] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.537725] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 5.537829] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 5.566314] [drm] Initialized drm 1.1.0 20060810
[ 5.578198] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.578202] i915 0000:00:02.0: setting latency timer to 64
[ 5.616676] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input10
[ 5.640873] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 5.640878] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.640879] [drm] Driver supports precise vblank timestamp query.
[ 5.640934] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 5.641035] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 5.641105] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.641106] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 5.817467] fbcon: inteldrmfb (fb0) is primary device
[ 5.981060] Console: switching to colour frame buffer device 170x48
[ 5.982871] fb0: inteldrmfb frame buffer device
[ 5.982872] drm: registered panic notifier
[ 6.010757] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[ 6.011024] acpi device:4e: registered as cooling_device4
[ 6.011185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 6.011212] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.011736] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[ 6.011930] acpi device:59: registered as cooling_device5
[ 6.012005] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12
[ 6.012073] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 6.012134] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.806806] EXT3-fs (sda3): using internal journal
[ 7.032629] EXT3-fs: barriers not enabled
[ 7.033131] kjournald starting. Commit interval 5 seconds
[ 7.033638] EXT3-fs (sda4): using internal journal
[ 7.033650] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 7.136750] Adding 2097140k swap on /dev/sda2. Priority:-1 extents:1 across:2097140k
[ 8.830153] NET: Registered protocol family 10
[ 9.400174] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 9.400249] ehci_hcd 0000:00:1d.0: PME# enabled
[ 9.413816] xhci_hcd 0000:04:00.0: PCI INT A disabled
[ 9.413916] xhci_hcd 0000:04:00.0: PME# enabled
[ 9.644602] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xdf007000-0xdf0073ff] (PCI address [0xdf007000-0xdf0073ff])
[ 9.644638] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 9.644679] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 9.644796] ehci_hcd 0000:00:1d.0: PME# disabled
[ 9.644816] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.644828] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9.754551] xhci_hcd 0000:04:00.0: BAR 0: set to [mem 0xdd200000-0xdd20ffff] (PCI address [0xdd200000-0xdd20ffff])
[ 9.754699] xhci_hcd 0000:04:00.0: PME# disabled
[ 9.754721] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 9.754736] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 9.754760] usb usb3: root hub lost power or was reset
[ 9.754764] usb usb4: root hub lost power or was reset
[ 167.112308] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[ 167.112437] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 177.751730] eth0: no IPv6 routers present
$ dmesg | grep -i input
[ 2.304579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.627803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 4.629597] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 4.629654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.903658] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[ 4.945199] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
[ 4.956752] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.528101] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.528163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.528222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.616676] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input10
[ 6.011185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 6.012005] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12
$ cat /sys/class/input/mouse0/device/uevent
PRODUCT=11/2/1/63
NAME="PS/2 Logitech Wheel Mouse"
PHYS="isa0060/serio4/input0"
PROP=0
EV=7
KEY=70000 0 0 0 0
REL=103
MODALIAS=input:b0011v0002p0001e0063-e0,1,2,k110,111,112,r0,1,8,amlsfw
$ cat /var/log/Xorg.0.log
[ 232.348]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 232.349]
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 232.349] X Protocol Version 11, Revision 0
[ 232.349] Build Operating System: Linux 3.0.0-ARCH x86_64
[ 232.349] Current Operating System: Linux asdfg 3.0-ARCH #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011 x86_64
[ 232.350] Kernel command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
[ 232.350] Build Date: 08 August 2011 08:24:13AM
[ 232.350]
[ 232.350] Current version of pixman: 0.22.2
[ 232.350] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 232.350] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 232.351] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 17 19:58:21 2011
[ 232.397] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 232.406] (==) No Layout section. Using the first Screen section.
[ 232.406] (==) No screen section available. Using defaults.
[ 232.406] (**) |-->Screen "Default Screen Section" (0)
[ 232.406] (**) | |-->Monitor "<default monitor>"
[ 232.406] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 232.407] (==) Automatically adding devices
[ 232.407] (==) Automatically enabling devices
[ 232.464] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 232.464] Entry deleted from font path.
[ 232.464] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 232.464] Entry deleted from font path.
[ 232.464] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 232.465] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 232.465] Entry deleted from font path.
[ 232.465] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 232.465] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 232.465] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 232.465] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 232.465] (II) Loader magic: 0x7d3620
[ 232.465] (II) Module ABI versions:
[ 232.465] X.Org ANSI C Emulation: 0.4
[ 232.465] X.Org Video Driver: 10.0
[ 232.465] X.Org XInput driver : 12.2
[ 232.465] X.Org Server Extension : 5.0
[ 232.466] (--) PCI:*(0:0:2:0) 8086:0116:1043:1662 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[ 232.466] (--) PCI: (0:1:0:0) 10de:0df4:1043:1662 rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 232.466] (II) Open ACPI successful (/var/run/acpid.socket)
[ 232.466] (II) LoadModule: "extmod"
[ 232.498] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 232.500] (II) Module extmod: vendor="X.Org Foundation"
[ 232.500] compiled for 1.10.3.901, module version = 1.0.0
[ 232.500] Module class: X.Org Server Extension
[ 232.500] ABI class: X.Org Server Extension, version 5.0
[ 232.500] (II) Loading extension MIT-SCREEN-SAVER
[ 232.500] (II) Loading extension XFree86-VidModeExtension
[ 232.500] (II) Loading extension XFree86-DGA
[ 232.500] (II) Loading extension DPMS
[ 232.500] (II) Loading extension XVideo
[ 232.500] (II) Loading extension XVideo-MotionCompensation
[ 232.500] (II) Loading extension X-Resource
[ 232.500] (II) LoadModule: "dbe"
[ 232.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 232.501] (II) Module dbe: vendor="X.Org Foundation"
[ 232.501] compiled for 1.10.3.901, module version = 1.0.0
[ 232.501] Module class: X.Org Server Extension
[ 232.501] ABI class: X.Org Server Extension, version 5.0
[ 232.501] (II) Loading extension DOUBLE-BUFFER
[ 232.501] (II) LoadModule: "glx"
[ 232.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 232.517] (II) Module glx: vendor="X.Org Foundation"
[ 232.517] compiled for 1.10.3.901, module version = 1.0.0
[ 232.517] ABI class: X.Org Server Extension, version 5.0
[ 232.517] (==) AIGLX enabled
[ 232.517] (II) Loading extension GLX
[ 232.517] (II) LoadModule: "record"
[ 232.517] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 232.518] (II) Module record: vendor="X.Org Foundation"
[ 232.518] compiled for 1.10.3.901, module version = 1.13.0
[ 232.518] Module class: X.Org Server Extension
[ 232.518] ABI class: X.Org Server Extension, version 5.0
[ 232.518] (II) Loading extension RECORD
[ 232.518] (II) LoadModule: "dri"
[ 232.519] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 232.536] (II) Module dri: vendor="X.Org Foundation"
[ 232.536] compiled for 1.10.3.901, module version = 1.0.0
[ 232Interestingly enough, the same thing happens in Windows on my U46E - the Synaptics driver recognizes the touchpad only as a PS/2 mouse and two-finger scroll won't work.
Edit: The elantech module you posted fixes the problem on the U46E, too. Thanks! Now to fix it for Windows...
Last edited by kalinatek (2011-08-29 20:13:07) -
Touchpad detected as ImPS/2 Logitech Wheel Mouse
I have an Asus laptop (not an eee pc), and my touchpad is detected incorrectly. It thinks it is a "ImPS/2 Logitech Wheel Mouse." I have tried to use the synaptics driver by configuring /etc/hal/fdi/policy/11-x11-synaptics.fdi
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.product" contains="ImPS/2 Logitech Wheel Mouse">
<append key="info.capabilities" type="strlist">input.touchpad</append>
</match>
<match key="info.capabilities" contains="input.touchpad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<merge key="input.x11_options.SHMConfig" type="string">true</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<merge key="input.x11_options.TapButton3" type="string">3</merge>
</match>
</device>
</deviceinfo>
but this causes the touchpad to stop working entirely. Here is the relevant section of my Xorg.0.log
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event7"
(**) Option "SHMConfig" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) ImPS/2 Logitech Wheel Mouse: no supported touchpad found
(EE) ImPS/2 Logitech Wheel Mouse Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ImPS/2 Logitech Wheel Mouse"
(II) UnloadModule: "synaptics"
also here is the incorrect entry from /proc/bus/input/devices
I: Bus=0011 Vendor=0002 Product=0005 Version=0063
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input7
U: Uniq=
H: Handlers=mouse1 event7
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=1036
Is there some way I can let my system know that this is indeed a touchpad so I can configure it properly?I can't really gather anything useful from dmesg. Here's the possibly relevant output:
$ dmesg | grep -i input
input: Macintosh mouse button emulation as /devices/virtual/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
input: Asus Laptop extra buttons as /devices/virtual/input/input6
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input8
$ dmesg | grep -i logitech
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
$ dmesg | grep -i -C 3 touchpad
asus-laptop: K40IN model detected
asus-laptop: Brightness ignored, must be controlled by ACPI video driver
input: Asus Laptop extra buttons as /devices/virtual/input/input6
Registered led device: asus::touchpad
usb 1-5: new high speed USB device using ehci_hcd and address 2
ACPI: Battery Slot [BAT0] (battery present)
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00
There's nothing about synaptics anywhere.
Is there anything potentially useful here? -
Ipad 2 can't see logitech bluetooth mouse M557
Hi,
I made sure that this mouse would connect to my ipad 2 before I bought it and other bluetooth equipment. My iPad sees and connects to everything else but not the mouse. I am able to connect the mouse fine to my HP laptop.
I've checked the Apple website ant this logitech bluetooth mouse M557 (http://www.logitech.com/en-ch/product/bluetooth-mouse-m557) should connect to Mac OS and IPad 2. Is that simply not true or am I doing something wrong. I've checked the driver is up-to-date via laptop, I've restarted everything several times and I've tried googling to see if others have had an issue. The only think I've found is a way to "hack" my iPad but i REALLY don't want to do this!!
Can anyone help me please?
Thanks in advance!!Anyone?
-
Logitech Touch Mouse App won't work or display cursor on a iOS device running RD Client App
I was trying to use Logitech Touch Mouse App installed on a iPhone5 as a physical mouse with a RD Client installed on another iPad mini. The host is a NB running Windows 7. The Touch mouse movement is noticeable on the RDC screen on iPad mini, but the cursor
is missing. It appears the cursor image was blocked by the RDC.
It would be very helpfull for the RDC running on a iOS device to support this type of WiFi mouse App to enable a physical mouse (through a smart device). I can see many usage models of RD Client with this type of physical mouse feature.Hi,
The version 8.1.3 is released, please update to the latest version and see how it works,
https://itunes.apple.com/us/app/microsoft-remote-desktop/id714464092
Thanks.
Jeremy Wu
TechNet Community Support
Maybe you are looking for
-
How to creat a Data provider based on different fields in SAP BW ?
Hi, Experts, There are 20 fields of Plant Maintainace like : SWERK BEBER STORT TPLNR EQUNR INGRP QMDAT ---peroid STTXT QMDAT - Date of Notification QMNUM QMTXT QMART AUSVN AUZTV AUSBS AUZTB AUSZT ERNAM QMDAB AUFNR I want to creat a Report b
-
Using Keynote remotely via a WebConference
Does anyone know of a process in which one can create a Keynote that is presented live in front of an audience, along with being filmed during the presentation and allow remote users to view both the video of the presenter and the live Keynote screen
-
What's the meaning of "...(Complied Code)" in the exception messages?
Hi all, I'm monitoring a program running abnormally. In its log, I see many exceptions like "at XXX.YYY.methodFoo(YYY.java (Compiled Code))" which is not sufficient for me to locate where in the code this exception is thrown. At first, I thought beca
-
Size of text is too small for pdf when printed
When I finished filling in the pdf - the text is too small when I printed out the form.
-
Inventory movement takes away delivery note picked qty.
We have a situation that delivery note is created and picking is saved. Inventory movement such as MB1A, MB1B, MB1C or Post Goods Issue, the system will only check available inventory and not worry about confirmed and/or committed quantities. And