Logitech wireless solar keyboard K750 for MAC OSX OS 10x8x

is the logitech wireless solar keyboard K750 an acceptable paring choice for the MAC OS X Mountain Lion OS 10x8x

You have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Make a "Genius" appointment at an Apple Store to have the machine tested. The routine hardware diagnostics used by service providers may not detect the fault. There is a specific test for this issue.
Print the first page of the panic report, and the support page linked above, and bring them with you.
Note that the replacement program only applies within three years of purchase. If you wait beyond that date, Apple may refuse the service.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.
You may be able to stop the panics by disabling automatic graphics switching in the Energy Saver preference pane, but that's not a solution. 
Most likely, the logic board will be replaced. Sometimes the replacement part is also defective, so be prepared for that possibility.

Similar Messages

  • Wireless Issues - laserjet pro cp1525nw for mac osx 10.7.3.

    I have just purchsed  a Laserjet pro cp1525nw for mac osx 10.7.3, I downloaded set up info for the new OSX with no problem.
    I come to the wireless set up and eventhough it has found my router and connected with printer I am getting the attached message!
    What can I do to solve this?

    Hello,
    Thanks for the post.  Interesting one.......Since it was was discovered, are they both on the same network?  I've included a link below with some great information on network installation with MAC.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02520151&tmp_task=useCategory&cc=us&dlc=en&lang​...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Wireless usb adapter EW-7711UAn, drivers for Mac OSX 10.9 (Mavericks)

    Hi,
    I have recently got a wifi usb adapter (above indicated) as my airport card is not working anymore and I needed a quick cheap option... After hours and hours trying to make the new device work, it seems the problem is the version of the drivers (there´s not drivers for Mac OSX 10.9) or that´s what I think. Does anyone know something about it? In the meantime I am waiting for an answer from MediaTek (the owner)... I´ll let you know if as soon as I get a reply what happens
    cheers!

    this adapter is using the chip RT2870 of Ralink. You can download its driver for OSX 10.9 frome Ralink website.
    http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=502

  • What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes.  I really need to update my iPhone and CAN'T!!  GRRRR!!!

    What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes.  I really need to update my iPhone and CAN'T!!  GRRRR!!!

    Minimally you need Snow Leopard or greater:
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Cisco connect software for MAC OSX 10.8.2

    Cicso,
    Please hurry up with releasing Cisco Connest software for MAC OSX 10.8.2
    Mine doesn't work anymore with the wireless Linksys router E3000

    I think we just need to wait until they update the software that will be compatible with this router. Who knows Cisco will be able to read this thread.

  • Vmware Fusion Beta for Mac OSX Released Today

    I don't know if this is the correct forum; if it's not, please pardon me.
    VMware Fusion Beta for Mac OSX has been released today. This product, while the developers admit has some bugs in it, promises to make virtual computing a whole lot easier and would eliminate for many (not all) the need to use Boot Camp. The link for this new program is http://www.vmware.com/products/beta/fusion/
    On that page you can find links for support and forums as well.
    If you need a free virtual appliance to use with Fusion, then use this link http://www.vmware.com/vmtn/appliances/
    Currently, there is no charge for using the BETA program. The VMWare folks are asking people to give feedback on their use of the product.
    This is what we've been waiting for to purchase our new MAC. I can say without a doubt that from my own experience with Linux boxes, VMWare is the best virtual solution on the market. It's easy to configure and supports a wide variety of hardware and OSs. I can even move the virtual machines I created under Linux to my new MAC when I receive it.
    The time has finally dawned for me to retire the last remaining pc towerbox in my home. My wife and I recently expunged one of those machines earlier this week and are eagerly looking forward to getting rid of the other one.
    We am really looking forward to purchasing the new Mac Pro. What makes it especially appealing for us is it's scalability and the fact that we can use our current hardware,including our Kensington Track Ball mouse and current monitor with it, although we are taking a serious look at a new Apple Display as well.
    Many thanks to everyone for taking the time to read this post. I am looking forward to joining and my wife is looking forward to rejoining the MAC community.

    You might try the VMWare beta forum:
    http://www.vmware.com/community/forum.jspa?forumID=371
    Susan

  • The Java for Mac OSX 10.5 Update 10 removed the Java plugin from Firefox 5.0. How do I re-install it?

    I've just installed Java for Mac OSX 10.5 Update 10 and can no longer run Java Applets from Firefox 5.0

    Dear Craig,
    Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
    I'm sure that this is 64-bit
    CF 8.0.1 Enterprise Build 3080
    I had moved the Java SE 6 to the top in both Plugin and Applications. The
    correct version is showing in the terminal window. See below.
    Last login: Thu Jun 18 11:27:09 on ttys001
    Beta-4:~ Colin$ java -version
    java version "1.6.0_13"
    Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
    Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
    Beta-4:~ Colin$
    CF will not start. I have the activity monitor open, and when I start CF you
    see it in the activity monitor for a few seconds as it starts up. When the
    message process is completed in the terminal window CF disappears in the
    activity monitor.
    Any suggestions?
    C
    Hi, Colin,
    My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
    (Intel or PowerPC)? (2) What version of CF are you running and what installer
    did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
    To start, try the following:
    1. Normally you'd shut CF down first ... but that's not necessary for you
    2. Open Java Preferences again
    3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
    Plugin and Applications)
    4. Open Terminal
    5. Type java -version (you should see 1.6.0_13 as the new version)
    6. Try to start CF again
    This may not work (I've had issues with it) but it's technically how it's
    supposed to work. With the Java Preferences utility, you're visually setting a
    default JVM (you can do it with commands in Terminal but this is much faster
    and easier).
    If CF still won't start, look for the jvm.config file in your CF application
    folder (try /Applications/ColdFusion8/bin or
    /Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
    is on my machine for a particular version of CF that's installed similar to
    yours). You can override the JVM in this file but, hopefully, that won't be
    necessary!
    Best,
    Craig

  • How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!?????

    How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!????? Please Help!!!

    Sorry, it's for 64 bit IntelMacs only...
    updating Java SE 6 to 1.6.0_26 for 64-bit capable Intel-based Macs. 
    Java for Mac OS X 10.5 Update 10

  • How to install english language adobe Photoshop CS4 for Mac OSX 10.7.5 ?

    Hello,
    I am in Germany and need to switch Photoshop to English.
    The option is not available in the language preferences (attached screenshot)
    I could only find an update for Mac OSX 10.4, but not 10.7?
    Please help!
    Thanks in advance!

    Languages are serial number specific. You cannot change them on the fly. If your serial number supports it, you would have to install it in English. anything beyond that is a hack like stripping the localization files from the app package...
    Mylenium

  • Where can I purchase and download adobe acrobat x standard for Mac OSx?

    Where can I purchase and download adobe acrobat x standard for Mac OSx?

    Acrobat X Standard is not avaialable for MAC OS X. However you can go for Acrobat X Pro.

  • Defect in Acrobat XI for mac osx

    Using Acrobat XI for mac osx
    I opened a bank statement pdf.
    I redacted the account numbers. It gave me option to remove hidden metadata. I removed the hidden metadata.
    I saved the document and it removed character "I" from many places in the document.

    Hey,
    You might try combining the PDF files using 'Create> PDF Portfolio' option and let me know if it works or not.
    Please let me know.
    Regards,
    Anubha

  • Where can I get current info on SysAdmin Certification(s) for Mac OSX SL and Lion?

    Where can I get current info on SysAdmin Certification(s) for Mac OSX SL and Lion? The Apple website for this is "under construction" for weeks now...
    Thanks,
    [email protected]

    Certification test for OS X 10.7 Lion are not available yet. I assume they will be nearly identical to the test of 10.5 and 10.6. Hopefully, the reason the certification website has been down for a while is that they are updating it with the new information. Though I really wouldn't expect any 10.7 certification test to be available for 2-4 months. Peachpit Press didn't publish their training material for 10.6 until October even though 10.6 was released in August.
    As far as the 10.6 Certifications:
    Certified Support Professional, 10.6 requires the 9L0-403 exam.
    Certified Technical Coordinator, 10.6 requires the 9L0-403 as well as the 9L0-510 (Server Essentials) exams.
    The information for the Certified System Administrator, 10.6 is "hidden" on the integral7 website but according to this Wikipedia entry, you need to pass the 9L0-510 Server Essentials exam as well as these three:
    Directory Services
    Deployment
    Security and Mobility

  • Where can I download  Xcode for mac osx 10.7.5?

    Where can I download  Xcode for mac osx 10.7.5?

    Xcode 4.6.3 can be downloaded from the Developer Downloads (you will need to be registered for access).

  • Replacement Keyboard keys for Mac Book Pro 17in 2007

    I have just broken the tabs off the back of my f10 key of my macbook Pro 17 inch which I got in 2007, and was wondering is there anyway of getting a replacement key as i use f10 quite a lot in my work

    Just google your topic: "Replacement Keyboard keys for Mac Book Pro 17"

  • Reinstall Flash CS3 for Mac OSX

    Recently had to replace the hard drive on my Mac Book Pro. Data transfer to the new hard drive went well EXCEPT for my attempts to reinstall Flash CS3 and Flash Player (I'm forgetting the name of the latest and greatest version of the media player--forgive my temporary ignorance). I followed all of the procedures outlined in the ReadMe file. Have tried it several times to no avail. I keep getting an error message at the end of the reinstall process and the program will not open. All of the application files appear to be on my hard rive. Something is missing or needs to be repaired. I just don't know where to start to find out what needs to be repaired or replaced or updated. I suspect that because there have been numerous updates to Flash player, something related is interfering with the reinstall process. Any advice help would be appreciated.
    Cheers.

    Mike, thank you very much for your help. Luckily I have found the 
    right Flash version: 10.1.102.64
    Am 05.02.2014 um 20:55 schrieb Mike M:
    Re: flash player for MAC OSX 10.5.8
    created by Mike M in Installing Flash Player - View the full 
    discussion
    Flash Player 10.3.183.90
    >
    That's a zip file containing BOTH Windows and Mac versions.
    You'll find a debug folder and a 10.3.183.90 folder. It's in the 
    latter. It'll be a DMG named 10_3_183_90.dmg.
    >
    Is your Mac Intel or PowerPC?
    Please note that the Adobe Forums do not accept email attachments. 
    If you want to embed a screen image in your message please visit the 
    thread in the forum to embed the image at http://forums.adobe.com/message/6089591#6089591
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/6089591#6089591
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/6089591#6089591
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Installing Flash Player at Adobe Community
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/thread/416458?tstart=0

Maybe you are looking for

  • CF9 install on Windows server 2008 error

    I am getting the following error message when attempting to run the installer for CF9: Microsoft VC++ 2008 Runtime Installer has determined that Microsoft Visual C++ 2008 Redistributable Package is not installed. Select OK to install now. To perform

  • Use of EJB in a package application.

    Has anyone come across a packaged application/product (Like and ERP system, CRM product etc.) that was created using EJB as the "back-end" and then deployed as a "shrink-wrapped" application? I would like to hear some views on this from everyone.

  • ORA-32162: Read/Write SQL method not registered

    Hi, I am using OTT generated objects to pass them to my PL/SQL procedures as OUT parameters. When I call the registerOutParam() function, I get this error ORA-32162: Read/Write SQL method not registered. I am calling my mapping function after creatin

  • Does Flex HttpService support https with client authentication

    Hi, We have a set of backend services available over https with client auth (cert based). We need to use mxml HttpService to access these backend services. Does HttpService support ssl with client auth? Another question is, for Https does flex share

  • Updated to 10.5.8, Safari 4.0.3 now has problems?

    Certain (most) websites I visit now load oddly. Some get a horizontal white bar across them in various places that disappears when content around it is selected. Also, most websites that I visit load completely, but the progress spinner in the right