LOGO Printing.... REVERSE :-(

Hi Frnds,
here i am printing the logo using smartforms. in some printers it is coming correctly and in some printers logo is coming on REVERSE. i am not able to identify that problem. when i go thru print preview it is coming correct. but when i gave print... logo is coming on REVERSE.
This is coming on some printers only. i have tested using all user ids.
both printers are LASER JET only.
Regards,
Balu

hi,
It is becos of printer setttings , not the problem of abaper.
Contact your basis persons and they to rectify it.
Regards,
guru
*reward if helpful

Similar Messages

Sapscript logo printing reverse

In a sapscript, I am using a logo. In print preview, its coming fine but when it is printed, it is coming reverse.
What could be the problem and possible solutions? I have seen some threads here related to that but I would like to know if those solutions solved their problems.
I appreciate your time and input in advance.
Thanks a lot.

hi Krishen,
Check out these threads
logo printing reverse
Sapscript logo is printing topside down
Regards,
santosh

Smartform LOGO Printing -reverse for a User???

Hi Guy,
This is typicial issue which I never got.
He says what ever he is printing like PO,STO every logo is printing up in Reverse direction.
He is using a Network printer and funny thing is all others are also using the same printer and they are able to print it in right direction.
What could be the reasons?
Regards
Vara
Message was edited by: Vara K

Hi
i have also faced some issues like instead of the logo there is a black patch appearing but when i print its fine
but when i Reinstalled the front end it fixed the issue because there isnt any thing with the print control because others are getting it fine
there could be some update patches for front end also u should look for
Harish

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page i.e the reverse side of the page, in the correct direction?in the

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.

Image printing reverse in Smartforms

Hi Experts,
For some of the countries, the images are printing reversed. Is this printer dependent ? or some thing else. Your help is appreciated.
Thank you,
Surya

Hi,
If the code is wrong then the IMAGE should be print reverse for all the Countries, but in your case it is printing reverse for only some of the countries, then ask your basis people to check the printer settings in SPAD transaction code
Regards
Sudheer

Logo printing issue in Smartform

Hi,
I have uploaded company logo and i am using this logo in my Z*PO smart form, during printpreview it is showing correctly (the alignment and resolution), if i print that, the logo alignment is not proper, it is coming down than what i am aligned, the placement is perfect in printpreview.
Let me know, is there any other setting that i need to make.
Thanks,
Prasad S.

Hi friend,
I think there are lot of related post in SDN for this problem. Just search the forum before posting questions.
One of the similar post i have attached below.
Link : [Problem with printing logo in smartforms|Problem with printing logo in smartforms;
I think this will help you. If you still did not get the answer just search in Google by giving the key word "SAP + SDN + Smartforms + Logo printing problem". There are large of solutions to help you.
Thanks,
Sri Hari

When i print a pdf the imige print reversed like a negative. How can i correct this?

when i print a pdf the image print reversed like a negative. How can i correct this?

Sometimes if a .pdf is smaller than actual 8 1/2 x 11 or bigger, you'll either get way too much of the image and it's cut off, or the image is too small. You should also try to do this in the print driver window: Properties -> Advanced -> Image Options -> Disable "PostScript pass-through"

HP L7780 Prints Reversed Images

I have a one year old Sony Vaio computer with Windows Vista. Recently, Windows updated my operating system with Service Pack 3. Since then, my printer (HP L7780 All-in-One) sometimes prints reversed images. I do not know if this is caused by Service Pack 3 or not. My printer operates wirelessly. Does anyone have any suggestions as to how I might fixthis? Thanks.

I am having the same problem that you're describing with an HP L7590. I am using a Dell XPS 1330 with Windows 7 -- and it just cropped up last week. The L7590 still works fine with my Dell Latitude 430 using XP. Ideas, anyone?

Print reverse order: never works

on the print menu.. when i select print reverse order... it's suppose to print the last page first... this never works. and it seems acrobat/reader is the only one that disregards this... any way of modifying this? currently use version 9 on snow leopard

Colleen:
Welcome to the Apple Discussions. You can reach Apple regarding the print order at this site: http://www.apple.com/support/iphoto/customerservice/orderprints/. Give them all the particulars and see what response you get. That's also the site to request a refund if the prints still do not show up.
Do you Twango?

Logo Print

Hi all,
I am having one problem with Logo print .
In one smartform i have changed one logo
In preview it is showing perfectly
But in print out it is showing it is showing
dots ..,
regards,
Mohd.

Hi,
If you have uploaded the logo from the desktop means it will come like that if you want to remove the dots before saving the logo first the image as 256 bit format image and then upload.
Or else if you are using an already existing image then change the resolution of the image in the smartform and then if the problem persists try to take the print out by changing the printer there if it is coming fine means then the problem will be with the printer.
Hope this will help you.
Regards,
Venkat.

PROBLEM WITH LOGO PRINTING IN REVERSE DIRECTION

HI,
When Ever I take the print out of the checks, The company logo is getting printed in reverse direction, but if i look at the print preview , it is showing up correctly. even if i take the print out of just the logo from SE78, the logo is getting printed out in reverse direction...I think it is the problem with the printer settings, but i m not sure. Can any one please help me out with this issue,
Regards,
Raghu

Hi,
Are you trying to get this print directly from the backend or some frondend application triggers your form? As I also faced same problem many a times but then observed that when smartform was triggered from frontend, logo was always in its right position.
Regards,
Shikha

Logo printed in a reversed manner

Hi,
I'm facing a problem while printing a smartform. I have a logo in my smartform which is printed in an inverse manner while printing it in a laser printer. However, in some m/c's this logo is printed properly. Is any setting required somewhere to print this properly.
Please suggest.
Regards,
Anindita

Hi Kumar,
I had faced same kind of problem,
Then I refreshed the printer specifications and it started working properly. But the thing is it is Basis or System admin problem.
Contact them and resolve ur issue,
if problem still persists, revert back
reward points if u find this as useful answer
regards
Shailendra

HP 8620 printer two sided printing reverses pages

Is there a way to change the order that this printer prints double sided prints? It prints last page first, so if it is 3 pages pages 2 & 3 are one page and page 1 is just one-sided. Need this to be reversed. Can you do this in the Mac driver?
Lisa

Hello @thekoaman,
Welcome to the HP Support Forums!
I understand that you're experiencing issues when duplex printing from your Mac OS X 10.10 Computer to your HP Officejet Pro 8620 e-All-in-One Printer. I want to thank you for including all of the detail regarding the troubleshooting steps you have already completed in your posts. At this time I do believe that there is either a driver corruption on your computer with the HP Officejet, or an issue with the file that you're attempting to duplex. If multiple documents are experiencing the duplexing page order issue than that will rule out a corrupted document. Can I please have you follow the steps below.
Step 1: Reset the Print System:
To start, I am going to have you Reset the Print System on your Mac as it is important that we have a nice clean slate to work with for troubleshooting. Please click here for instructions on how to perform the Reset. When the website opens follow the steps under'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. This Reset will remove every printer from your Mac. However, it does not uninstall the printers. Therefore, should you use other printers on this Mac, once the Reset is complete simply ensure that the printers are connected via a USB Cable or Network connected and (+) Add them back in. Do not add your HP Officejet back in at this time.
Once the reset is complete, please proceed to the next step.
Step 2: Uninstall Drivers and Software:
Next, please click here for steps on how to properly uninstall your printer. Once the site opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as they are the same for Mac OS X 10.10 and follow the steps to complete the uninstall process.
Once the uninstall is complete, please continue on.
Step 3: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 4: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 5: Add the Printer:
1. Please click here to download the correct drivers for your printer.
2. Once the website opens select the Download button on the top left
3. Once the download is complete, please follow the onscreen instructions to install your printer
4. Once the installation is complete, I would like you to check your driver to ensure that the HP Officejet driver is being used and not the AirPrint driver.
5. Click the Apple menu, and then click System Preferences.
6. Click Print & Scan, and then check if the name of your printer displays in the Printers list.
7. If your printer is already listed, remove and re-add the printer to confirm communication with the Mac. Click the name of your printer, click the minus sign (), and then delete the printer
8. Click the plus sign (), click Add Printer or Scanner, click the name of your printer
9. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that you have the HP Officejet driver selected and not the AirPrint.
10. Click Add to add the printer to the list.
- Source
Now that the driver is added back in successfully, please try duplex printing again.
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

When I print in Adobe Acrobat Pro 9, it prints reversed..

Only recently when I try to print in Acrobat Pro 9, it prints backwards/reversed.. like a mirror. It shows correct on the page, but when it's printed it's reversed. I must have changed a setting by accident but can't find the issue. Possibly in Adobe Illustrator when I tried to change the direction of an image. It only prints like this in Acrobat.. no other application.

Hi hollym23446293,
What are you printing to? Have you checked for a "Flip Horizontally" option (or similar) option in the Print dialog box? Its location will vary by printer, but it's often in the Layout settings.
Please let us know how it goes.
Best,
Sara

Same logo printing different colors for different file formats?

I created a logo for a client who will be using it for some printed materials. I provided the logo in 3 different file formats: EPS, JPEG and Tiff.
In INDesign and MS Word, the logo is printing a different color for the EPS vs the Jpeg/Tiff file types. Is there something I'm missing?
I've even tried changing the color to something completely different and we are getting the same result. There is STiLL a considerable difference between the Eps file and the other two files.

No the logo was created for print and I originally had used a pantone color but converted to CMYK. The actual value is C69 M7 Y0 K0. When my client inserts the eps file into her InDesign layout, it prints a bright aqua color and if she uses either the jpeg or tiff, it is a much different blue. We've tried other colors because I was thinking it might just be the fact that it's a blue color... but the same thing happens to other colors. I am wondering if there is some sort of color management setting that is causing the eps to be different?

LOGO Printing.... REVERSE :-(

Similar Messages

Maybe you are looking for