Logon Error Message - Enterprise Services Builder address not maintained

Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.

Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani

Similar Messages

  • Intigration builder address not maintained error

    Hi All,
      While accessing intigration builder in ECC5, i am getting the following error.
    "Intigration Builder address not maintened"
      Along with this error teh following directory was opened automatically..
    "C:\Documents and Settings\sundaramj\SapWorkDir"
    can any one provide solution for this problem?
    regards,
    sundaramj

    Hi,
    Are you getting this error in the Browser ?
    These blogs will help you on the logon issuses-
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
    Integration Builder Address not maintained
    REgards,
    Moorthy

  • ABAP Proxy Error - Integration Builder address not maintained

    I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
    On configuring the relevant connections, I run SPROXY and get the following error:
    Integration Builder address is not maintained in the Exchange profile (Connections)
    I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
    On running the reports
    SPROX_CHECK_IFR_RESPONSE
    SPROX_CHECK_HTTP_COMMUNICATION
    SPROX_CHECK_IFR_ADDRESS
    SPROX_CHECK_IFR_CONNECTION
    My question is:
    What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
    and SAPSLDAPI_<sys id of XI server>
    Should the XI Integration Builder address be maintained in R/3?
    If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
    If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?

    Just recheck the steps with this and come up with doubts then
    How do you activate ABAP Proxies?
    Regards,
    Prateek

  • Using a wi fi not mine can't send email error message says my email address not recognised

    I am using my IPAD in UK. (friend's wi fi) from Australia
    Can receive email ok
    Have entered his Outgoing address mail.btinternet.com.
    Can't send emails.  Error message says  server does not recognize my address
    What do I do??

    Thanks for the response. Unfortunately, things have gotten progressively worse now in another direction. After I posted this, I shut down my computer to go to work. It had to "rebuild" the filevault sparseimage to recover space.
    Now when I restarted it, I am missing things from my dock, ? marks are in their place, all of my preferences have been set to some default AND this is the biggie - I have no mail accounts whatsoever. When I click on Mail, it asks me if I want to establish a new account. It looks like the FileVault action has totally screwed up my system.
    I tried rebuilding the permissions as recommended above using safe boot. Didn't help. I am now trying to repair the FileVault sparseimage as recommended elsewhere. I think I now see what the problem might be. I have two different sparseimages for the same account with the only difference is that a 1 is appended to the second one. Unfortunately I can't tell which it is. I have a feeling I should repair the 1st one (without the suffix 1). It must not be able to open that and hence that is why it made a second one.
    Any other help anyone?
    Nick

  • Integration Builder address not maintained

    When I go to https://<servername>:port/exchangeProfile
    I don't see any setting, anybody who can help me,
    Thanks
    Jagraj Dhillon

    Hi Peter,
    1) Were you able to open in exchange profile?
    To findout, try the following URL
    http://<hostname>:<port>/exchangeProfile
    2) Make sure to check connection parameters in Exchange Profile and the following values are set
    com.sap.aii.connect.repository.name
    com.sap.aii.connect.repository.httpport
    3)Make sure your J2EE server is running. You can find out by going to the URL http://hostname:50000.
    Also complete all your post installation activities.
    Hope this helps.
    Rgds,
    Sam Raju

  • ESB(Enterprise Services Builder) access error after PI 7.1 install

    We have installed PI 7.1 system. Everything went well with installation.
    We can access all the components such as RWB, Directory, SLD,...
    However when we try to access ESB(Enterprise Services Builder) we are geting the following error:
    "Cannot connect to server using message server: ms://si5host:8106/P4"
    We checked the exchange profile parameters and  com.sap.aii.connect.repository.mshttpport is having 8106 value.
    Did any one face such an issue. Please respond.

    The problem is resolved for us.
    The problem was caused because we did nt have a "FULLY QUALIFIED SERVER NAME" in the exchange profile parameters on the JAVA side.
    Once we had the  FULLY QUALIFIED SERVER NAME the issue was resolved.
    Hope this helps other people who run into the same issue.

  • Design Objects created in Enterprise Services Builder not appearing in Integration Builder

    I am fairly new to PI, so hoping someone can help.  I have created a number of design objects (DataType, MessageType, ServiceInterface, MessageMapping, OperationMapping).  I had also imported an RFC object successfully as well that is used in the creation of the design objects.  All have been saved and activated, and there are no apparent errors listed. 
    After saving and activating the objects, I went into Integration Builder, and created a new Configuration Scenario.  However, when trying to add in the Interface Determination, Receiver Determination, Sender Agreement, and Receiver Agreement, I do not see the the RFC object or design objects that were created in the Enterprise Services Builder.
    Can someone advise as to whether or not I have missed a step somewhere?  Or perhaps there is something else that I need to do before I can get the design objects and imported RFC object to appear in the Integration Builder?.
    Thanks in advance.
    Tuan.

    Hi Tuan,
    Are you using Business System or Business Component.  If your using Business System you need to assign Software Component Version to Business System in SLD.  If your using Business Component you have to add the Interface Name Manually to the Business Component.  Please see the Below screen shot, you have to add Sender or Receiver Interface manually to proceed further step.
    Thanks,
    Satish.

  • Web Service Logon Error Message

    Hi Experts,
                         I have created a web service and trying to consume it in SOAPUI but i am getting error saying that Logon Error Message .  when i see the Tcode  SOAMANAGER (Provider Security tab) i have this position i am not sure which one i need to choose .
    1.SSL over HHTP(Transport Channel Security) .
    2.Asymmetric Message Signature/Encyption.
    3.symmetric Message Signature/Encyption.
    and check box for secure Conversion.
    Your valuable answer will be helpfull
    Thanks,
    Devd

    Hi Murali,
    I guess SOAP UI does not support Symmetric Message Signature/Encryption or Secure Conversation easily. Both are rather complex message security mechanisms. They are seen as alternative to SSL when messages should travel along different SOAP intermediaries to have end 2 end encryption.
    You use case sounds that you just want to test security with SOAP UI. Assuming that SOAP UI supports SSL please choose SSL over HHTP(Transport Channel Security)
    in conjunction with the user id/password in message authencation.
    Then in SOAP UI try to find something like a username token. This is some part of XML SOAP UI adds to the SOAP message to send the username and the passwort.
    Regards,
    Mathias

  • When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build"

    When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?

    I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11  itunes v. 9.0   and I just want it to be restored. I need help.  Oh and its an 8 gb ipod touch.

  • Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue?

    Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
    P.S. I am able to sync postcasts and music though!

    http://support.apple.com/kb/TS3694
    http://support.apple.com/kb/TS3125
    http://support.microsoft.com/kb/299357

  • When dowloading itunes, constantly get error message 'Apple Mobile Device -could not be installed- Verify you have sufficient privileges to install system services.

    When downloading itunes to my pc, get error message 'Apple mobile device could not be installed - verify you have sufficient privileges to install system services'
    i am forced to abort/cancel. Can anyone help please?

    Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
    You're not alone buddy.
    Frustrated.

  • HT1349 itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    Hello cynthialane,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best of luck,
    Mario

  • I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do.

    I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • Error inALE service (Segment type not maintained in Message type) status:29

    Hi all,
    Need your help.
    I have a added the a segment to the message type and which is linked in WE82( Message type:Debmas,basic type:debmas06 and extensionZxxx). And the segment is also set for release.It is an outbound senario. When i process it manually in WE19 using the basic type with the enhancement and via message type (with the message type and the extended type) I can process the idoc and the segment whic i have added with the following fields are displayed. But when i post the customer in BD12 with the message type I am getting the error in BD87 as " error in ale service Segment type ZXXX does not exist in message type DEBMAS".
    PLease do the needful. Its since 2 days I am struck with the same and was trying but I could not get any. Hope you guys might help me.
    Anything else to be refreshed or anything else to be done except we31.we30, we81
    Thanks in advance.
    Edited by: Farhy Farhy on Aug 2, 2010 12:29 PM

    Thanks for your reply Mr. Das.
    I have tried all the things and did not find any solution..
    Posted after checking all the things and the procedure. I did not write any custom program. Earlier I created the extension type and deleted and created the new extension type. But now it is taking the same old extension type and giving the error as the extension type is not maintained in the message type.
    I have deleted the old extension type completely but the old is onle getting reflected. Anything to be done to refresh.
    Waiting for the reply.

  • Problem with models in the enterprise service builder

    Hi all,
    I get this message from the enterprise service builder, when i double click on one of the models on the tree on the left of the builder itself.
    the message says:
    Error Initializing Business Modeling
    Initialization of business modeling cannot be started. You cannot work with business modeling. Check tht all required configutarion objects are available
    i made all the wizards suggested in /people/werner.steyn/blog/2008/03/03/how-to-look-like-a-hero-with-netweaver-ce-esr-sr
    please someone can help me to understand what the massage means?
    what is a configuration object? what can i do to fix the problem?
    thank you very much

    closed

Maybe you are looking for