Long Error Message when I burn to a DVD

I created a video in iMovie. Open the Packaged Contents and sent the .mov to compressor.
I set compressor to one of its preset DVD format: Best Quality 150 minutes.
Since the video is 2 hours and 45 mins - it took compressor 6 hours to convert to a MPEG2.M2V file along with an .AC3 file.
I then imported those 2 assests into DVDSP - green light since they are already rendered.
I checked the DVD Simulator and everything is perfect.
The final size of my video project says 4.3GB on the right corner of DVDSP.
If I use a standard 4.7GB Blank DVD - it tells me that it wont fit.
So I put in a Dual Layer Blank DVD. When it finishes I get the following message:
Formating Failed
Formatting was not successful. A suitable marker could not be found in the required layer break range.
Please help me! What am I doing wrong?

Did you remember to set the option to allow DVDSP to automatically insert the layer break point marker? If not, go and do so. Otherwise, create a chapter marker just over the halfway point on your project and set it as the layer break point.
You might also want to check your preferences... in the track section, check 'fix invalid markers on build'. It shouldn't be an issue at the moment, but it won't hurt to do it.
You also ought to see how big those assets really are - calculate the combined file size using your finder (and not in DVDSP). If it is over 4.3Gb then either compress the footage again to a smaller file size (lower the data rate) or go ahead with your DL disc.

Similar Messages

Error message when attempting burn

When I click on the burn button, it says this:
One of the volumes on the media is still in use.
As far as I can tell, there is not anything open...can someone tell me a solution?
Many thanks!

When you burn a disc DVDSP creates an image of the disc when encoding and building and uses whatever location you specify in the preferences to do so. Go into the preferences, click the 'Destinations' and make sure that you have got the right location set up. It needs to be a hard drive that has enough free space on it to create the temporary image and also hold the final image... generally, for an SD project, you'll need at least 12 - 15Gb free.

Error message when trying to copy a DVD with Roxio Toast v6.1.1

I'm trying to duplicate a DVD I made via Final Cut Pro and DVD Studio Pro by using Toast Titanium ver. 6.1.1.
About 3/4 of the way through the record process, I keep getting the following error message:
"Couldn't complete the last command because there was an I/O error.
Result code = -36"
Since I made this DVD myself, I don't believe there is any copy protection or region codes embedded.
The DVD has 2.72 GB of material on it.
Please advise, thanks.

Here are some things to try: Select the DVD in the Toast Copy window and choose Save as Disc Image from the File menu. When that is complete eject the DVD and insert your blank disc, choose the saved disc image with the Image File setting in the Copy window and burn your DVD.
Alternatively, drag the VIDEO_TS folder from the source DVD to your hard drive. Choose DVD-Rom (UDF) as the format in the Toast Data window. Click New Disc. Add your VIDEO_TS folder. Click New Folder and name it AUDIO_TS. Now burn your DVD.

Error message when using "Share...DVD"

I'm trying to make a DVD of a project in FCP X (Trial version) and I have been able to share to Youtube etc, but when I try to make a DVD I get the following error message:
"The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
What does this mean? Any way around it?
Thanks,
Alan.
MacBook Pro 2.8 Ghz, Intel Core i7, with OS 10.9.3

Tom,
No, I don't seem to have Compressor software installed...is that part of FCP, or a separate application?
Is that used to burn DVD's from FCP?
Thanks,
Alan.

Error message when burning Home Folder backup disk

I got this error message when trying to burn a backup disk (cd-rw) of my Home Folder. Could somebody please help me figure out what this means? -
The operation cannot be completed because one or more required items cannot be found.
(Error code -43)
Could not open the data fork of "<unable to get file path>" (-43).
Any help would be greatly appreciated.
iMac Intel Core Duo Mac OS X (10.4.4)
iMac Intel Core Duo Mac OS X (10.4.4)

There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

I get an error message when I try to burn to disc

I get an error message when I try to burn Playlists. It says no burning software found. I have deleted ITunes and reinstalled it but I still get that message.

Hello butch139,
I'd recommend looking through the following article, as it provides troubleshooting steps that can help get iTunes burning discs.
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
Cheers,
Allen

Getting error message when trying to burn cd's

hi i am getting a error message when trying to put certain cd's on i-tunes :
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
VIA Technologies, Inc. VT8366A-8233
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2007-12-01 13:35:51.
Video Display Information:
NVIDIA GeForce4 MX 440 (Microsoft Corporation)
** CD/DVD Drive Tests **
UpperFilters: GEARAspiWDM (2.0.6.1),
D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
Audio CD in drive.
Found 4 songs on CD, playing time 20:08 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 04:00:35
Track 3, start time 09:01:05
Track 4, start time 14:49:05
Audio CD reading failed. Error Code: 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
Audio CD in drive.
Found 4 songs on CD, playing time 20:08 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 04:00:35
Track 3, start time 09:01:05
Track 4, start time 14:49:05
Audio CD reading failed. Error Code: 1117 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
please could you help

Thanks for replying. I went to the store and bought CD's and DVD's of different brands, many of which I have used in the past. All but a couple of them worked. Maxell, Memorex, Verbatim and Sony did not work.
After several long discussions with AppleCare and some tests, they finally determined that the Superdrive needs to be replaced. So, I'm off to the Apple Store.
Thanks again!

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

Since I installed Nero 2104 I get an error message when I try to start iTunes: registry settings changed probably due to other cd/dvd burning program please reinstall iTunes, which I've done using repair option but the problem persists...?

Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

Getting error message when burning DVD

I keep getting an error message when I try to burn my DVD in iDVD 08. I have imported the movie in quicktime format from iMovie HD and everything works fine until I go to burn the project. I renders everything else but when it get to the movie it has an error and cancels the burn.

Suggestion: Not a bad idea to test the disc image with apple's dvd player app prior to burning.
Click Here
I prefer to use Toast for burning an image to Dvd-R (verbatim at 4x or slower for best results).
Click Here
Not my personal favorite choice ... however it is possible to burn thru apple's disc utility like this:
Click Here:
Hope these help but if not just come on back.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Getting Error message when trying to burn disk

I keep getting an error message when I try to burn
my IDVD theme project t disk. I checked the path
and all the videos appear to be there. Can you help me?

Hello, cinemann,
Welcome to the discussions.
+Can you help me?+ Maybe....probably....but you need to give more information about your project.
What are you trying to burn? Movies, photos? From where? iMovie, iPhoto? What versions are you using?
What exactly is the error message? At what point do you get the error message?
What is the 'path' that you checked?
What OS are you using? How much free drive space?
Once you provide more specific information, we can address your problems.

I bought a mac companion for my desktop mac running os x but received the following error message when I tried to install the quikprotect software download: "power pc no longer supported." I did not read that anywhere when investigating. What gives?

I bought a mac companion for my desktop mac running os x but received the following error message when I tried to install the quikprotect software download: "power pc no longer supported." I did not read that anywhere when investigating. What gives?

PPC, also known as PowerPC has not existed on Macs since the beginning of 2006. Apple made a bridge software and included it with Mac OSes until 10.6.8 known as Rosetta that would allow you to run software written for the PowerPC Macs. 10.7 and later can't run that bridge software. You have one of several options:
Install 10.6 retail on a USB Flash drive, and run that application while booted from there.
Find an update designed for 10.7 or later of the software.
Find a combination of Virtualbox or Paralllels that can legally run a version of 10.6 side by side with your 10.7 software.
Run Windows on your Mac with Virtualbox or use CrossOver that requires no Windows to run a Windows version of your application.
Your Mac is an iMac Intel. I will ask a moderator redirect your thread to the 10.7 forum, and no action is needed on your part.

HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)? It has been working fine, until today...what does this mean??

When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?

I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP

Long Error Message when I burn to a DVD

Similar Messages

Maybe you are looking for