Looking for a better solution that tunnel interface

Hi
acctualy I have a Vsat connection between my remote site and central office
on both site we have router and sat modem
I have now a tunnel interface between my two routers,I am looking for a better idea,,

hi...
so you have tunnel interface between your two router so now what are you looking for...?
secure IPsec connection or what???
please explaine in details
regards
Devang

Similar Messages

  • Looking for a better solution to the "Save for web" color shift issue

    Ok, everyone who has fussed much with photoshop and "Save For Web" knows about the color shift issue. If you want your colors to look right after you "save for web", you have to work in the sRGB colorspace, and have Proof Colors checked (soft proofing on) and the proof color setup set to Monitor RGB, otherwise what you get looks terrible when displayed in a browser.
    But of course if you are editing for print, this is exactly what you DON'T want to do. Well, I work in both. In fact, often the same images, and I want them to appear as close as reasonably possible in both print and web formats, and without a lot of fussing on my part. And I'm pickiest about the print mode, since I have the most control there, so that's the way I want to edit by default.
    Nothing new here.
    Now comes the interesting part (in my mind, anyway). Obviously there is a known remapping -- because PhotoShop DOES it when you select Proof Colors. So the inverse mapping must also be known (with some gamut issues, but I'm not concerned with those, because, after all, I'm VIEWING it on a monitor anyway!). What I want is a plug-in that automatically applies that inverse mapping so that, when I do a Save For Web, I end up with the colors I've been viewing all the time when setting the shot up in print mode. Then, too, I don't have to worry about what mode I'm in when I'm editing -- it just fixes it when doing a save-for-web.
    Again, I want to edit in my normal print mode (typically ProPhoto colorspace, and with soft-proofing off or set to the printer/medium combination I expect to use), then do a single operation (might be a multi-step action) to "screw up" my colors so that when I then do a "Save-For-Web", the resulting image, when viewed on the average color-stupid browser, looks like the image I've been seeing in Photoshop.
    Anyone know of such a beast?   I would gladly pay for a plug-in that really works and fixes the problem.
    And if you have other solutions, I'm interested, but the absolute requirement is that it I do one single edit pass for my colors for both print and web use, and I get what I see on the screen in PS on both the prints and on the web display (i.e., working in sRGB/Monitor RGB mode all the time won't cut it). And PREFERABLY, let me do all my editing work in the ProPhoto (or at least AdobeRGB) colorspace so I have a gamut closer to what the printer can do.
    Anyone got a decent solution for this?

    Chris
    I spent all day Googling and doing side by side comparisons of my old and new systems.
    My display is a Dell U2410. It has several presets, including sRGB and Adobe RGB. I've been using sRGB.
    On my OLD system, (Win XP, PsCS2, DwCS4) there seems to be no distinction between color managed and non color managed apps, even on this wide gamut display. I could capture (digital camera) in Adobe RGB, open and edit in PsCS2, save as .psd, convert to CMYK for print, or convert to sRGB for SFW. All images looked identical and they printed and displayed perfectly. I thought this was normal, and seemed logical. This also seems to be the source of my incorrect assumptions. I was trying to get my new machine to behave like my old one.
    So I get this new machine (Windows 7, PsCS5, DwCS5) and now (still in sRGB display mode) all color managed apps appear de-saturated. Non color managed apps are OK. If I switch the display to Adobe RGB, color managed apps are OK, but non color managed apps are way too saturated. From my investigation, I believe this is normal behavior on a wide gamut display. I've tried changing the Control Panel > Display > Screen Resolution > Advanced settings > Color Management options, but to no avail. Either I'm missing something, or Windows 7 is doing color management differently.
    It seems my only option now is to use Adobe RGB display setting for Ps, etc. and switch to sRGB for Dw and non color managed apps. Or, have 2 separate files for print and web. I've Googled 'til my eyes are numb and still not sure I'm getting this. Any enlightenment would be greatly appreciated.
    Finally, I don't see an edit function here, so I can't remove my previous incorrect reply. Moderator, please feel free to do so.
    Thanks

  • Looking for a nice solution for different cases with nearly same operations

    Hi everybody:
    I'm looking for a nice solution for the following problem:
    I'm measuring different data at the same time (with different devices).
    I would like to save these data all in one array (or cluster?), but I
    don't know exactly the way to do this. All values have corresponding
    time values. So for one data type it would result in a 2d array,
    wouldn't it? But how can I save different data types with their time
    values in one array? Or should I take a cluster? And how can I get only
    a certain type of data out of this array or cluster again? E.g. if I
    only need data type "3" with its time stamps for evaluation? I would
    really appreciate an example, I work with LV 7. Thanks!
    Then - for evaluation - I only need one data type of these different
    data. Which one I would like to choose via the frontpanel (it changes
    from test to test). So, I thought of a case structure (where I can
    choose which data type and correspondingly which evaluation way). The
    evaluation steps for the different data types are quite the same, but
    can vary in order of execution. I could write for every case the
    (nearly) same evaluation steps, but this would take a lot of time, plus
    if I need to change one step I need to change it in every case.
    Does anybody know a better way?
    Thank you very much in advance,
    Steffi

    steffi.kono wrote:
    In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
    Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
    steffi.kono wrote:
    And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
    There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
    To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
    LabVIEW Champion . Do more with less code and in less time .

  • Looking for form filling app that can do this

    I am looking for an iPad app that can do this. I know it would need some type of cloud/web based backend to setup and manage but I'm looking for the following:
    We are a fire and security company. Many jobs require multiple documents to be created such as a service ticket, alarm activity log and maybe another form. The problem is if the tech needs to fill out the service ticket and activity log, those forms require in many ways the same information such as description of problem and end results and then each form has it's own separate info required. Right now the tech either has to retype all the similar data or try to copy and paste between the different fillable PDF files.
    I'm looking for a solution that will allow me to select which forms are needed and then it will populate the required fields to fill in and when complete it will export it to PDF on the appropriate company document templates and allow signatures to be placed before printing via AirPrint and emailing it to customer and our office.
    Does anyone know of a solution like this? It is not an easy thing to look for on Google.

    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • Looking for a headphone solution editing surround

    Looking for a headphone solution when editing suround environment in Soundtrack Pro 2. I have a Mac Pro. Is there any phones that would connect (direct or indirect) to the optical audio output, or do I need to buy a 5:1 speaker sound system with headphone jack?

    Hey sorry for the late reply, I was busy to figure out alternatives as harman kardon was a difficult affair to find and acquire, but the good news is I managed to get hold of alternative.
    Sony I assume recently launched a Bluetooth headphone DR-BTN200 which is compatible to my MacBook Air , iPad mini and android phone galaxy s2 with ease, the sound quality is pretty good as compared to other brands of Bluetooth headphones I checked compatible or incompatible to apple devices alike, this is definitely what I was looking for, costed me 7990 INR, this is highly recommended for ppl who are confused, I carried my devices to the store and checked before I bought a pair and pretty much happy,
    The best part of this is its battery backup, I have used this hours for 3-5 days but this has not drain even then, but I do keep this charging once in 2-3 days just to keep this ready otherwise it does not even ask for it neither the quality of sound drops after 2-3 days of use.
    This is over the ear headphone which is very soft but it's get sweaty around the ear I guess that's bound to happen.
    Do get back to me for any other details, would be glad to share with all :)

  • Delivery analysis / Looking for a BEx solution

    Hello everybody,
    I'm looking for an easy solution within the BEx. I would like (if possible) to avoid touching the data model.
    Here what I would like to achieve:
    Description of my desired report: delivery analysis ( number (quantity) ofdeliveries with X positions ).
    Output should look like this:
                                number (quantity) ofdeliveries with X positions        
    Country              X=1        X=2      X=3    X=4    X=5   X=6   X=7   X=8   X=9    X= more than 10 
    FR                        1451   407   377 and so on
    ES                        177     40    24   and so on
    IT                          173     66    44   and so on
    For me its quite tricky. In my Cube (Multiprovider) there should be all information included.
    I have country, delivery (itself) , number of deliveries, number of delivery positions )
    How can I do that. Maybe with new calculated figure and a condition. Any ideas?
    Hope to hear from you.
    Best regards Harry

    steffi.kono wrote:
    In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
    Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
    steffi.kono wrote:
    And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
    There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
    To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
    LabVIEW Champion . Do more with less code and in less time .

  • Looking for a better heatsink help....K8N NEO2

    Im looking for a better heatsink....any suggestions? I may oc it but for now I wont....it idles at 40-41 and stays at 60 when im gaming 58 if i turn off cool n quiet.....and thats with some ocz ultra5 Thermal compund....ThX

    Yes, agree with SAB, zalman 7000 is a good one, however I´ve got 2 very simular K8N Neo2-systems but with 2 different cpu coolers.
    One with zalman 7000alcu and one with Thermalright XP-90 and a zalman 92mm fan ( you can use what ever 80/92mm fan you like high speed, low speed, led colored, etc).
    Both are equal regarding cooling to my experience, but I prefered the XP-90 because I did not have to remove the backplate ( I think zalman recommends mounting it´s own backplate to get the right distance/pressure between the cooler and cpu ).
    With the XP-90 you just switch the retension mechanism which is easy ( even with the MoBo in the case ).

  • My printer is a Samsung ML-2010R.  Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro.  Previously, I was running Mac Os X version 10.5.8 through this printer  on a 4 yr old Macbook. Any further help is most appreciated:-)

    My printer is a Samsung ML-2010R.  Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro.  Previously, I was running Mac Os X version 10.5.8 through this printer  on a 4 yr old Macbook. Any further help is most appreciated:-)  Humbly, bowiej

    Apple seems to be naming their operating sytems usability based on the respective turd size of the feline in question. Lions are big, very, very, very big.
    I had a system that served me well for 2 years until I mistaking bought a new machine which runs mega-turd (Lion). Foolish me, now nothing works properly, its a daily struggle to get anything working smoothly using my NEW mac mini. All my other machines work fine, even the windows machines and my Android tablet see all the network components and can talk to each other.
    My Internet service is over 3g which I share to the house using internet sharing via my brand new €800 mac mini running POS Lion, everytime the service is interrupted, Kaboom, the mini resets the DHCP server, but doesn't seem to refresh any of the components so connections drop everywhere.
    Its amateur hour at Apple folks.
    There are several posts alone relating to internet sharing, I have submitted a bug report relating to the non user controllable DHCP server (which may be at fault), but the response / solution from Apple was lacklustre and ultimately didn't work.
    See this, there are some work around's in there;
    https://discussions.apple.com/thread/3771614?start=0&tstart=0

  • Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
    Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
    There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
    ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
    http://www.stratospherix.com/products/filebrowser/
    Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
    A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
    You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

  • I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

    I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

    As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
    Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

  • I am looking for an iPad App that will play a specific iTunes song, at a specific time, on a specific day?  Thank you all!

    i am looking for an iPad App that will play a specific iTunes song, at a specific time, on a specific day?  Thank you all!

    Sorry, i did not say that i need to go out further than 1 week.  This is for a church Bell Tower Music System.  So we don't want to have to re program the music every week.  We are looking for more of a Calender App that will play iTunes Songs for alarms...different songs, on different days.  IDEAS ANYONE ???

  • Looking for a stopwatch app that can run on iPod Touch 2nd Gen (using ios 4.2.1), do any exist?

    Looking for a stopwatch app that can run on iPod Touch 2nd Gen (using ios 4.2.1), do any exist?

    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • Looking for a reading App.  iPad (iOS 7.1.2) - Kindle.  I am looking for a good app that can help a college student with reading books that cannot be found on audio book. Voice over works, but monotone!

    Looking for a reading App.
    iPad (iOS 7.1.2) - Kindle.
    I am looking for a good app that can help a college student with reading books that cannot be found on audio book.  I have tried voice over and it works but it's very monotone and it really strings things together. 
    - I'm willing to pay for a good app but I can't seem to sort though the many that are out there. Any suggestions.

    Ah. I'm surprised, but there we go.
    Have a look here ...
    http://jam.hitsquad.com/vocal/about2136.html
    (courtesy of googling 'OSX free multitrack recording software')
    Didn't have time to do more than skim, but 'Ardour' looked promising. Protools is the only one I've used, the full product is one of the industry standards, but the free 'lite' version listed here seems to be limited to 2 in/out as well.
    Referring to your original post, I'd think trying to write or 'script' something would be a nightmare ... synchronisation of streams within something like Applescript would be a major issue, quite apart from anything else.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

  • Looking for a virtual app that will allow me to take a photo then be able to add details

    Looking for a virtual app that I can use in my event planning and designing that I can take a pic on my iPad and then design the pic to my personal needs?

    "Motion 5" is your friend.
    Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
    This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
    While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
    Motion 5: cheap at $49.99 (just got my download two days ago)
    Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
    If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
    Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

  • I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

    I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

    Hi,
    I could resolve the issue since there were lot of issues after system copy.
    1. During distribued to Cenrtal system - system copy.
    You need to combine both DB and CI export copies in one folder during which one thing can happen.
    SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
    DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
    Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
    I eliminated this issue also.
    After JAVA started I faced an issue with XI related navigations.
    ecchangeProfile url still had an entry of Production System. This may be a bug.
    After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
    Now I can access all the XI related navigations.
    I need to also perfrom SGEN and Profiles import.
    Do I need to change any additional settings after this so that my production and DR can work without any issue?
    Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
    Regards,
    Rajkumar

Maybe you are looking for