Looking for a broken iMac G4 Display with arm

Hi, im looking for a broken iMac G4 Display with arm included, i need it for a school project, so if anyone knows where i could get/buy one please tell me. Thanks!

Hi, there should be lots of iMac parts machines in fact I just looked at one auction a second ago.
http://cgi.ebay.com/Apple-iMac-G4-1GHz-17-for-PartsW0QQitemZ200364020743QQcmdZViewItemQQptZApple_Desktops?hash=item2ea6a05407&_trks id=p3286.c0.m14&trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1234%7C293%3A1%7C294%3A50
You must be searching with the wrong keywords....
Kevin

Similar Messages

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

    I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
    502 - Web server received an invalid response while acting as a gateway or proxy server.
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
    ARR version installed is 3.0
    To throw more light on the configuration:
    Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
    All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
    Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
    Edge : Windows 2012 with Lync 2012 Std - 1 No 
    (192.168.11.101 DMZ) in workgroup
    ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
    Certificate : Internal Domain root CA for internal and External (Digicert).
    Internal Network : 192.168.10.x /24
    External Network (DMZ) : 192.168.11.x /24
    Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
    Edge has : sip.domain.com, webconf.domain.com, av.domain.com
    IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
    Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
    Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
    Internal AD Integrated DNS pointing Front-end
    Type of Record FQDN
    IP Description 
    A sip.domain.com
    192.168.10.100 Address internal Front End  or Director for internal network clients 
    A admin.domain.com
    192.168.10.100 URL Administration pool
    A DialIn.domain.com
    192.168.10.100 URL Access to Dial In 
    A meet.domain.com
    192.168.10.100 URL of Web services meeting
    A lyncdiscoverinternal.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to internal users
    A lyncdiscover.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to external users  
    SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
    sip.domain.com Record pointer services to internal customer connections using TLS 
    External DNS pointing Edge & Proxy
    Type of Record FQDN
    IP Endpoint
    A sip.domain.com
    x.x.x.100 Edge
    A webconf.domain.com
    x.x.x.100 Edge
    A av.domain.com
    x.x.x.100 Edge
    SRV _sip._tls.domain.com
    sip.domain.com: 443 Edge
    SRV _sipfederationtls._tcp.domain.com
    sip.domain.com:5061 Edge
    A Meet.domain.com
    x.x.x.110 Reverse Proxy
    A Dialin.domain.com
    x.x.x.110 Reverse Proxy
    A lyncdiscover.domain.com
    x.x.x.110 Reverse Proxy
    A lyncweb.domain.com
    x.x.x.110 Reverse Proxy
    In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
    In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
    The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
    a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
    Certificate was installed properly.
    b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
    HTTP Response Headers:
    Content-Length: 1477
    Content-Type: text/html
    Date: Wed, 14 May 2014 10:03:40 GMT
    Server: Microsoft-IIS/8.0
    Elapsed Time: 1300 ms.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • Looking for a (broken?) G5 or a G5-Case

    Hi,
    as the subject already says, am I looking for a broken Power Mac G5 tower.
    I used to work with one 2 years ago (during my military service) and learned to love its high-quality appearance!

    I did (and are still doing) this the last week.
    There are a lot of Cases sold in the USA - for less than 70$...!
    Unfortunately the shipping is about 200$
    But there are not many sold in Germany - so I hoped to find one this way.
    2 weeks ago I asked at an Apple-store support-counter. But they told me that they are not allowed to sell these privately.

  • Looking for a site that shows problems with windows patches or updates.

    Looking for a site that shows problems with windows patches or updates...so I know what not to install.
    Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
    that does it with expertise.
    Which forums would be best to look for such problems.
    Thanks in and advance for suggestions

    Hi,
    I agreed with Cyber and Rick.
    Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
    Although there might be some problems when installing it, Windows update is not the one to blame.
    For troubleshooting Windows updates, if needed:
    Fix Microsoft Windows Update Issues
    http://support2.microsoft.com/gp/windows-update-issues
    Best regards
    Michael Shao
    TechNet Community Support

  • I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

    I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

    Hi,
    I could resolve the issue since there were lot of issues after system copy.
    1. During distribued to Cenrtal system - system copy.
    You need to combine both DB and CI export copies in one folder during which one thing can happen.
    SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
    DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
    Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
    I eliminated this issue also.
    After JAVA started I faced an issue with XI related navigations.
    ecchangeProfile url still had an entry of Production System. This may be a bug.
    After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
    Now I can access all the XI related navigations.
    I need to also perfrom SGEN and Profiles import.
    Do I need to change any additional settings after this so that my production and DR can work without any issue?
    Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
    Regards,
    Rajkumar

  • Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

    Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

    I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
    I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
    http://www.switcheasy.com/products/CoverBuddy/
    I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

  • Is there any way I can have a box sent to my house for my broken iPhone...with out calling?

    Is there any way I can have a box sent to my house for my broken iPhone...with out calling? Preferably online.

    You could try your nearest Genius Bar; in order to decide whether or not a repair/replacement is necessary, a human being would have to troubleshoot and assess the situation by talking to you.

  • I'm looking for examples of CAN control code with LabWindows CVI

    I'm looking for examples of CAN control code with LabWindows CVI.

    Hi,
    The NI-CAN driver installs some examples for both the frame API and Channel API (NI-CAN 2.0).
    The typical installation directory is:
    C:\Program Files\National Instruments\MeasurementStudio\CVI\samples\nican.
    It might change depending on where you installed CVI.
    DiegoF

  • Looking for a notetaking app that syncs with PC

    I use playbook for mobility but PC for work.  I am looking for a (simple) note taking app that will allow me to sync with PC - preferably via dropbox. I used to use cintanotes on PC but that doesn't sync to PB.  Looked at Evernote but seems bloated and some adverse reviews.  Some others exist by seem to have issues also - eg Simplenotes.  Anyone out there found a good working solution?
    Solved!
    Go to Solution.

    One named NotePad is free, saves as .txt files.
    Another, WriterRoom, costs $1.99USD, and saves as .txt and .doc files.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Using broken iMac as display

    Hey guys,
    I have a broken iMac (27-inch, Mid 2010), it has an extensive history. First time, about last year, my Hard Drive Failed due to overheating - i took it to a local service and they fixed it however I lost all of my data. Some time after, my graphics card got broken and needed replacement as well, so i took care of that, in the meantime I got a 13" Retina MB Pro, as I needed a laptop. Finally earlier this year, the motherboard broke and i got a 16,000 Czech Crowns ($725) bill to fix it. So i just stopped using it and fully switched to my MB Pro.
    Now the issue: The display is in perfect condition, no scratches and its 27 inches, i want to make use of it for video editing. The computer does not properly boot up, however it does in safe mode. everything is very slow but it works, now my question - is there a way i can get it to work?
    It has a mini-display port input so i guess i'll try that first, but if that does not work, is there any other solution? I know that the display port is probably the only way as the LCD data cables go into the motherboard ect. however is there a way i could re-wire something? I'm willing to get my hands dirty just to bring that display back to life!
    Any feedback is greatly appreciated!

    I thought so too, but it is still functional when i boot it up in safe mode - everything works, just slowly. Do you think the signal will be delayed or not carried at all in that case, since its transmitting it even if in safe mode?

  • Imac extended display with win 7

    Hi,
    I currently own an imac 27" and i'm looking for an option to have both mac os and win 7 running simultaneously. Is this possible? Instead of using bootcamp, i was thinking of using a virtualized copy of win 7 and have it extended onto a second 27" display.
    If anyone has a similar setup, could you pls share your experience?

    That's pretty simple, you only need to get either Parallels or Fusion, both are virtualization apps designed to allow you to run Windows (or other OS's) from within OS X. Both applications do the same thing, one isn't better than the other. Some people prefer Parallel's some prefer Fusion. You can find information on both at:
    Parallels
    Fusion
    Roger

  • Stuck in "Looking for Backup Disk" in Time Machine with Time Capsule

    I too am having a "Looking for Backup Disk" message going on forever . . . .
    I have the following showing in my log (which is for a backup that started almost 6 hours ago . . .)
    Starting automatic backup
    Attempting to mount network destination URL: afp://Toni%20Way;AUTH=[email protected]/Data
    Mounted network destination at mount point: /Volumes/Data using URL: afp://Toni%20Way;AUTH=[email protected]/Data
    Disk image /Volumes/Data/Toni’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    I am not getting successful backups.  I first thought it was a problem with the WD hard drive I had so I invested in a Time Capsule thinking maybe it would work better with the Mac (i.e. Apple to Apple).  I got a few successful backups when I got the Time Machine on June 12th but none since.  I only just noticed that I wasn't having successful backups as there was no notification.  I have tried a Full Reset as per these instructions with no success: 
    http://pondini.org/TM/A4.html
    Help!

    I've successfully changed the name of the Time Capsule to "Toni TC" but still no success.  It is still sticking at Looking for Backup Disk.
    Still have a space in the name.. No spaces. No non-alphanumeric.
    Not that I think that is your problem.
    From the log the actual unit is mounted and you have everything working but not actually able to copy packets across the network.
    I have an ethernet cable running from my cable provider's router to the Time Capsule and then an ethernet cable running from the Time Capsule to the iMac.
    This is good... also turn off wireless in the computer to force connection by ethernet only.
    But when I go into Disk Utility, it isn't listed in the left hand side.
    Only the sparsebundle will list and only when it is mounted.. TC is a network drive not a local drive. It will not show up in disk utility.
    Let me suggest you erase the TC and start over.. sometimes it is the only way to get things going again.
    A4 reset of TM. http://pondini.org/TM/Troubleshooting.html
    And do a verify of the local disk.. A5.
    I would also like you to test copying a single large file to the TC.. create a new directory in the TC from finder.. and copy a single large file.. 1GB sort of size and get actual speed measurement from Activity Monitor.

  • Looking for note taking software to use with a graphics tablet

    Hello folks,
    I am trying to find a software that would allow me to interchangably use typing and writing/drawing on a graphics tablet smoothly.
    I'm looking for something that would essentially provide a 'blank sheet of lined-paper' where i can quickly type what my professors are saying, as well as easily draw whatever they are drawing. Also, since I am studying engineering, I would need something that I can easily write math symbols and equations so I can use it as scratch paper.
    At the same time, I am looking to save trees and money, as well as keep organized and simplicity when it comes to archiving.
    I have tried Microsoft Word 2008's notebook view, and this is currently the closest thing to what I want, but it favors mostly the text side of what I want (of course), and isn't very good in the drawing part. It also isn't very smooth when I try to do practice math/physics/engineering problems on it, nor is it very good at drawing molecular structures (O-Chem)... but for the most part, it gets the job done. It is also a headache because when you zoom in a lot to make it easier to write (mind you, I am using a tiny macbook screen..), the title bar also zooms in, and ends up taking half of the screen, making zooming in practically useless. (the title bar is also locked, so even as you scroll down, it stays in the top half.)
    I have also tried Adobe Acrobat Professional 7, where I simply made a blank notebook from some image online, and I use it as scratch paper. When it comes to drawing, it is very smooth, but it's a headache sometimes, because after writing something and pausing for a second or two, the pen tool automatically becomes a 'selector' tool, and so if i want to draw over what I previously wrote, it changes to selector and instead of writing over, it drags and drops the object around a bit. The tolerance for that is really high too, and i'd have to bring the pointer about half an inch or so before I can start writing something again. I also haven't given the text a try yet, but it lets me make collapseable text boxes, so that is good for further annotating my equations and drawings, but isn't very useful for a full-lecture class (i.e. biology)
    I also don't even want to consider photoshop, because it's basically too powerful, and I don't want my laptop fans going off in-class (its SUPER loud when it happens...) and I need it to last the day.
    So just a sum up:
    I'm looking for a good note-taking software (for mac) that will allow me to smoothly use my graphics tablet AND be able to type.
    MS Word '08 and Adobe Acrobat are close... but aren't quite to what I want exactly...
    I have a Wacom Bamboo tablet and an '09 Intel-based MacBook.
    Thank you in advance!

    I have had this same issue and found this program called NoteBook that allows you to type, and draw (write) notes on a variety of paper types, (lined, graphing, engineering,etc.) and it uses the .nb file type that allows you to save multiple "pages" inside one file in a sort-of "notebook" if you will. It works great, but has several minor disadvantages. I can't change the ink color, I can't change the tip thickness (other than the pressure sensitive option with my wacom graphics tablet), and it doesn't allow you to open pdfs or other documents to inscribe upon. All around though it has been wonderful. There are really no good note taking apps out there...

  • Looking for assistance in developing a magazine with 117 pages - iPad App with Adobe digital Publishing suite for the iStore

    We are looking for some help in developing and App, so that we can publish our current hard-copy magazine with 117 pages onto the iStore any suggestions?

    as bob said, it depends what kind of assistance.
    which language is needed, are you able to spend money on it, when is the deadline.
    do you need technic support, design help? do you have a license for dps, which one?
    ect.
    if you need a professional, experienced team our company could help you. but we will not work for free

Maybe you are looking for