Looking for a certain application/program

I am most definitly in the wrong forum, but the people who use this forum are probably the most knowlidgable about the application i am looking for.
I have a wacom tablet, and am getting very good at drawings and animation. I was wondering if anyone knew of a program where i can draw on my tablet , and it would record it like a film, so that i could import it in fcp. If anyone knows of this program, a similar program, or a program that includes this feture i would be very interested in knowing what it is?
Ethan

Another route would be to do it in After Effects.
You wouldn't draw, like what you're describing, but you can create paths that would stroke themselves on. i.e. you'd draw it before hand with the pen tool in After Effects or Illustrator, then stroke your paths, and key frame the end-point to make it look like it 'draws' on.
It's a bit trickier, but then you can make sure there are no mistakes, make is scalable (vector-based), and very smooth.
Just so you have options.
-Mark

Similar Messages

Looking for a lightweight application to stream music

Hey all. Since a recent update, Audacious has stopped working. It can't start and tells me there is a segmentation fault. I've traced the error back to the skinned interface, because when I try to run it with the gtk interface, the player works well.
However, I thought I'd take this opportunity to look at some alternatives. I have a couple of .pls files laying around that have information in them about certain online radio streams. I'm looking for a nice lightweight app that can play these files. I was hoping someone could give me a good tip on what program would be suited for this.

I'm now playing with MOC. It's different than what I'm used to, but so far I really like what I see. Clementine is far from anything I want to have, it is an entire library program. All I am looking for is a simple program that plays my web stream (as stated in the OP)
I've looked at MPD before, I'm planning on using it when I get my local music collection sorted. Right now all I'm listening to is online radio.

Looking for AirTunes reciver application

I'm Looking for AirTunes reciver application. Anyone seen such piece of software?
(an application that can do the same job as Airport Express - pop up in iTunes, and out the streamed music on the sound port. I want a computer instead of my Airport Express to be receiver for all music.)

There's this piece of software called Airfoil which sends audio from any program you choose to the AirPort Express (instead of just iTunes). I know that's not what you're looking for, but they do have some forums on their website where you might want to repost to see if anyone over there is more knowledgeable.
http://www.rogueamoeba.com

How to look for a certain value in a database using sql

Hello everyone. How do you do this in SQL? Or, is there a way to look for a certain value in a database? What I'm trying to do is this:
I want to look for the exact value "abcdefg" in the database so that oracle will return me details on the following that contains the said value:
1. the name of the table(s)
2. the column/field name(s)
Note: "abcdefg" could exist in different tables with different column names with different data types.
Any help is much appreciated. Thanks.
UPDATE: What about if I just want to check those fields/columns with string data types?
Message was edited by:
dongzky
Message was edited by:
dongzky

Just a teeny tweek
DECLARE
   l_dummy   VARCHAR2 (4000);
BEGIN
   FOR rec IN (SELECT table_name
                 FROM all_tables)
   LOOP
      FOR rec2 IN (SELECT column_name
                     FROM user_tab_cols
                    WHERE table_name = rec.table_name)
      LOOP
         BEGIN
            EXECUTE IMMEDIATE    'select 1 from '
                              || rec.table_name
                        || ' where to_char('
|| rec2.column_name
|| ') = ''CAS'' and rownum = 1'
                         INTO l_dummy;
            DBMS_OUTPUT.PUT_LINE (rec.table_name || ' ' || rec2.column_name);
         EXCEPTION
            WHEN NO_DATA_FOUND
            THEN
               NULL;
         END;
      END LOOP;
   END LOOP;
END;

Looking for a good application to use with my printer so i can print my own photo calanders and invitations?, looking for a good application to use with my printer so i can print my own photo calanders and invitations?

looking for a good application so i can print photo calanders and invitations at home?

Hello, i'm using same version of iphoto as you unless you have upgraded. i am looking to do the same with printing my photo cards to sell at an art tour. i have made photo cards by using an 8 1/2 by 11 glossy photo paper or matte photo paper. printing each side separately. then folding it either horizontally or vertically depending on how i have designed the card...i'm looking to do a better job and am looking for it to look more professional. is there special blank card paper to make it look more professional. many thanks for your reply.

Looking for a less expensive program other than Photoshop CS6

Looking for a less expensive program other than Photoshop CS6 and was wondering if Photoshop Elements is the answer. Does Photoshop Elements read PSD files, create layers, can you change the levels and color balance?

drumford65 wrote:
Looking for a less expensive program other than Photoshop CS6 and was wondering if Photoshop Elements is the answer. Does Photoshop Elements read PSD files, create layers, can you change the levels and color balance?
Yes, and much more.
Why not try the 30 days trial version which has all the features of Elements ?

[SOLVED] looking for lightweight free ftp program for KDE

im looking for a free ftp program, or an alternative good suggestion thats not free hehehe (i like cuteFTP for win) so i can download for my arch box? i would like to do some file exchange on my remote server periodically, and like to drag and drop, cut and paste, and navigate via file browser to make things go quicker. i have alot of files to move around.
Last edited by wolfdogg (2011-06-08 08:56:35)

kioslaves are cool. i guess they were working for me and i didnt even know it. i especially like the audiocd one. and thanks for pointing out that asset, i will refer to it more often now that i know about it, and learn how to maximize the use for them.
using dolphin, i was having some problems initially (nothing to do with standard ftp however) because the directory is actually a 'webprotect' directory, so is accessed by as http://user.domain.com/location i had to manipulate the url for a while to get it to load as ftp://domain.com/public_html/users/uname/location, infact i couldnt log in at all using my username, i had to log into the server as root using this method. this is because the webprotect uses .htaccess for permissions, so as accessed from ftp:// i believe the server doesnt use the permissions from the .htaccess. so thats one hitch when using a filebrowser such as dolphin.
COOLEST thing i found so far, using the file browser, it supports RESUME. wow. thats nice! saves teh file as .part, then suggests a resume when transfer senses the file already exists.
im SURE there is a way around this, ill just have to play with it for a while. because i dont want to be logging in as root, i want to utilise the subdomain that i created for users access on the website storage folders.
Last edited by wolfdogg (2011-06-08 22:33:10)

Looking for automated log watching program

I am looking for a log watching program similar to Logwatch on Linux which can then be automated, for my Xserves. Does anyone know of such a product?
Thanks,
Lisa

Just pay attention that you should immediately upgrade Snort as the HenWen website says, "The bundled version of Snort will not run in Leopard due to a change in Leopard's iODBC library (and you shouldn't use it in Tiger, either, since it has a security hole)."

Looking for SAP Netweaver Application server with any version

Hi Friends
I am looking for SAP NetWeaver application server alone with out Portal and collaboration and Trex
Some time back my self downloaded from SDN , but now not available
Due to some urgnt work i need to do some R&D on J2EE engine i need sneak preview version
So friends if your holding application server sneak preview any version kindly let me know
I am from Bangalroe India. So if any one my friends from banglaore city having kindly let
me know if possible i will collect personally
Thanks
Malli
Edited by: mallikarjuna pasupulati on Feb 3, 2009 11:11 AM

https://media.sdn.sap.com/javadocs/NW04/SPS15/index.html
Here is the v1.4 spec, which is the highest the netweaver currently is tested for.
http://java.sun.com/j2ee/1.4/docs/api/index.html
Regards,
Rich Heilman

Error for COM Routine application program (return code 40028)

Hi,
When we loading data in Planning Book ,we are getting below error
Error for COM Routine application program (return code 40028)

Hi,
Did you try checking your COM build? The COM communicates between your database and Livecache and fetches the data requested. The last time we had this, SAP recommended COM upgrade.

Looking for a BB applications

hi to all, i am a new BB user, can anyone help me please, i am looking for a BB applications, where can i find them?, how to install?, and which are the most improtant applications i have to use.
best regards
alobaydee.
Solved!
Go to Solution.

Hi there!
AppWorld is a good place to start:
http://na.blackberry.com/eng/services/appworld/
There are many other portals on the internet...a google search will help you.
It's impossible to answer your final question -- it is 100% dependent upon individual needs...
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Looking for a demo application

Hi Experts,
Now we are looking for a demo application which has possible to create , change , display a order,
do you know if there is such kind of demo application in any demo package? by the way , in webdynpro
how to switch from edit mode to display mode , we have to change the property for every UI elements?
is there any parameter which we can switch to display mode from change mode easily ?
thanks a lot for your help on this!
Best Regards,
Bruce.

Hi Bruce,
Check the package SWDP_DEMO/SWDP_TEST in SE80.
Regarding changing the UI elements, if its an Z-Webdynpro Component you can switch to change<->display mode using shortcut key CTRL+F1 . If it is a standard component, you need to go for enhancement. Check the below link which might help you.
Enhancing the WebDynpro Component and Methods - Web Dynpro ABAP - SCN Wiki
Thanks
KH

I need Internet Explore for a certain application. Can I download Internet Explorer?

I need Internet Explore for a certain application. Can I download Internet Explorer?

The last Mac version of IE is so old it doesn't display web pages correctly. It also doesn't have ActiveX. If that's why the site requires IE, the old Mac PowerPC version of IE still wouldn't help you.
You could use Boot Camp to install Windows to its own bootable partition. Or, use VM software (Parallels, VMware, VirtualBox), and install Windows in a VM. Then you'd have Windows running inside OS X with access to IE.

Looking for a standalone application/system menu

Most (all?) desktop environments features some kind of application menu in the panel. But for the people running more lightweight environments (like just a tiled wm) have no reason to have an extra panel around just for the menu.
I know about application launchers, such as launchy and gmrun, but the thing I'm looking for is something that could give me a list of all "bigger" programs installed, grouped by category. Because, simply, I can never remember all stuff I've installed over the years.
So I'm thinking: there must be someone out there that has developed a standalone application menu?
Either the program could just scan the "/usr/share/applications" direcotry, or one could try to extract the menu part from a panel program, such as lxpanel?

Hey, adeskmenu seem to be exactly what I'm looking for! Thanks a lot! :-)
(now just need to find out why the aur version crashes... no problem, though. seems to be other versions around that works)

Looking For A "Beat Making" Program

I'm looking for a program that makes beats and runs on the Mac os x. I've seen some but none of them have been pretty good. Like iDrum erc. I need professional stuff.

You will like this application:
http://www.apple.com/downloads/macosx/audio/traktordjstudio.html
It is probably the best option for OSX!
Hopefully this is helpfull or solved your problem. Consider rewarding some points!
Please see the "helpfull" and "solved" button's on top off this message! Apple: Why reward points?

Looking for a certain application/program

Similar Messages

Maybe you are looking for