Looking for a good replacement for the Palm PDA - that can sync w/ ical

Anyone have some suggestions? I am with T-Mobile so the iPhone is not an option.

Blackberry, using Missing Sync or something similar. Or you get an unlocked iPhone, which is better.

Similar Messages

A good replacement for music app

Hello there,
I got fed up using music app on ipad, the way they removed usefull stuff (like deleting full albums) remains a mystery for me. So like the title says, I'm looking for a good replacement for it, even ready to pay a few bucks. Any idea?
thx in advance!

This page examines some of the options:
http://www.wilmut.webspace.virginmedia.com/notes/migrate/frommobileme3.html

Looking for a phone replacement, want the Nexus 5 or One Plus One. Why aren't they compatible?

Hi all,
I am currently in the process of shopping for an acceptable replacement for my current phone. I am looking to buy a phone full price off contract and use it on the network. A few different ones I am looking at and prefer to have are the One Plus One and the Nexus 5. Now I understand when looking online people have tried popping a VZ sim card into both of these phones but have had no luck successfully connecting. Why is this? (I understand Verizon is a CDMA network)
When looking on the two websites, both of these phones contain the appropriate LTE radios and have support for the bands that Verizon currently uses. In addition the Nexus 5 also appears to have support for the CDMA radio and can utilize the Band Classes: 0, 1, and 10; (I'm not familiar with the ones that Verizon currently uses, some incite could be helpful?). The actual tech specs found on the two websites can be seen below:
Nexus 5:
Networks
2G/3G/4G LTE
North America:
GSM: 850/900/1800/1900 MHz
CDMA: Band Class: 0/1/10
WCDMA: Bands: 1/2/4/5/6/8/19
LTE: Bands: 1/2/4/5/17/19/25/26/41
One Plus One:
GSM: 850, 900, 1800, 1900MHz
WCDMA Bands: 1/2/4/5/8
LTE Bands: 1/3/4/7/17/38/40
If those are the correct CDMA bands that Verizon uses on their network, then why does the Nexus 5 not work on the network? Is there anything that can be done to make it work? Secondly, I understand that the One Plus One is not equipped with a CDMA radio, but why does it not connect to the LTE network? In addition I understand that Verizon is in the process of rolling out their VoLTE network, if either the Nexus or the One Plus One was able to connect using just LTE then theoretically you would not need the phone to connect using CDMA and everything would work properly, correct?
Looking forward to the responses. Have been a customer for years now and would like to continue that, but am starting to loose faith.

These will never work, and even after VoLTE it probably won't. They're both missing Band 13 which is key to Verizon.
They want you to buy THEIR phones on THEIR network. They don't make money when you buy those phones at cost. Another reason why the terrible Gnex was over $500 when it launched on Verizon. I'm surprised Verizon is getting another Nexus, but then again, it's now $650 so the appeal of Nexus devices is gone. To some, not all. Hope you can find a replacement.

Looking for a good configuration for SoundBlaster X-Fi

This really is painful to find a good setting to enjoy gaming.Anyone that can link a good configuration to start me off that they personally feel takes full advantage in deli'vering a great experience for gaming. I really appreciate any help.

Hello, i'm using same version of iphoto as you unless you have upgraded. i am looking to do the same with printing my photo cards to sell at an art tour. i have made photo cards by using an 8 1/2 by 11 glossy photo paper or matte photo paper. printing each side separately. then folding it either horizontally or vertically depending on how i have designed the card...i'm looking to do a better job and am looking for it to look more professional. is there special blank card paper to make it look more professional. many thanks for your reply.

E900 - a good replacement for an older WRT54G?

I still have one and it's been working for 6 years but I had an issue with it yesterday; AT&T tech support who I have my DSL service with determined one of the ports on the back of the router where my ethernet cable was plugged into was probably no longer good because I had no internet access on my desktop computer yesterday; error message said network cable unplugged so I plugged the cable into one of the other 4 ports on the back of my router and everything is working again. I spoke to someone at your company yesterday and they recommended this model to replace my WRT54G model. Is your E900 N300 router a good replacement for an older WRT54G?

It is a good router since it is running on N technology. To know more about that router try to check on the links below.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=62a624670c244f329169e0837adec576_KB_EN_v1.xml&pid=...
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=f3b4ba42107d4a2a8f84d77c0ee93f14_KB_EN_v1.xml&pid=...
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=e1bb6290d41b4ead817488c288329c3f_Product_Compariso...

How to load a large image for display on the Palm PDA

Hello:
I have a large image I would like to display on LV for Palm PDA. The documentation states there should be a 64K chunk limitation for VIs to compile on the Palm. Therefore, I decided to break this image up into 2D arrays of less than 64K per subVI. My 3.2 Meg image therefore has about 224 2D array subVIs. My motivation is to somehow use the build array function (with concatenate inputs) to reconstruct the image at runtime. I can compile each 2D array subVI as a test, but my attempt to reassemble and compile is futile. When I try to use the build array with only 8 of these subVIs in a top level VI the compiler complains its still too big of a VI. Using get info, memory for this top level states total ~2
3K of memory usage.
So can someone help me with this problem. Is there another way to load this size of an image into memory so I can display it on a picture control?
BTW, this can build on LV for PocketPC.
Thank you
Robert

Hi Robert,
You are correct in that one of the limitations of the Palm OS is that files cannot be larger than 64 KB in size (as stated on page 5-3 of the LabVIEW PDA Module User Manual). The suggested workaround is indeed to have a top-level PDA VI that calls subVIs, and this top-level VI can then have a total file size larger than 64 KB.
My suspicion is that with the picture control on the Palm OS, even if you are breaking up the image into smaller subVIs, the process of building the array to reassemble the picture is still forcing the Palm to allocate memory for each of those 2D array subVIs to place on the top-level VI's picture control
and thus causing the Palm to complain about not having enough memory. The LabVIEW PDA User Manual also states that "There is a total limit of 64 KB on all front panel array data". Thus, when you are trying to use the build array on the top-level VI, the 64 KB limit on front panel array data is still being exceeded -- even with only 8 of these subVIs.
The following KnowledgeBase article KB 38EJRHFQ: How Do I Put a Picture or Image on My LabVIEW PDA for Palm Front Panel? states that as a workaround, you can shrink the size of your image by using 4-bit or 1-bit data instead of the standard 8-bit pixmap representation.
This is really just a limitation of the Palm OS and the fact that there is simply no way of displaying that much front panel information for your picture. Either way, you would need to build up the array of pixels for your bitmap, and for a 3.2 MB image, I don
't believe there is any way for the Palm OS PDA to display the image in its entire at once.
Sorry about that...
Kileen C.
National Instruments

What is Apple's official plan for future battery replacement in the Macbook Pro with Retina Display?

What is Apple's official plan for future battery replacement in the Macbook Pro with Retina display?

No one here works for Apple nor does Apple visit this message board. We are all end users like yourself helping each other out.
"Official" Apple "replacement" announcements will be listed on their website and possibly on their Knowledge Base website.
Check the All Programs website too.

Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office

Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office

How big do you believe an ATV is? They are tiny compared to most devices.
The ATV is the only AirPlay receiver, short of an actual AV receiver with AirPlay support, but those are MUCH larger.

Early Inspection for a Goods Receipt for production order

Dear Experts,
This is with respect Early Inspection for a Goods Receipt for inspction type 04.( 03 is also active in material master)
We made partial confirmation 250 qty for production order using t code co11n ( total qty of production order is 1000).
made the usage decision with an acceptance and posted all open stocks. to unrestricted.
Now in second partial confirmation prodn order of 250 qty was made . This suppose to be rejected . but sytem will add this 250 qty directly to unrestricted stock . how to over come this .
Regards
Sandeep

Don't make the UD until all stock has been receipted?
You basically approved the batch. So why wouldn't the system put the stock to unrestricted?
Why would you make a UD when you still have stock to be posted anyway? You can post stock without without making a UD so why not just post some if you need it, and wait on making the UD?
Craig

How much for a board replacement for iphone 4?

Please Help, how much for a board replacement for iphone 4? thanks.

Apple does not replace just the board, they offer complete Replacement iPhone 4 exactly like yours for $149.

Looking for calendar app that can sync multiple calendar colours in outlook

I Have multiple colour categories in my calendar but need a calendar app that can sync with outlook. Do NOT want to sync with google calendar. Any suggestions? Thanks

Hi ron1098,
Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

csa3, I want to make sure you are able to take advantage of this offer. Have you submitted a Preorder for the iPhone 6? If so, you can submit your appraisal before September 30, 2014 using the following link: http://bit.ly/GGnDDC
AndreaS_VZW
Follow us on Twitter @VZWSupport

TS1702 The update for Pages says it is installing however it has been like this for days. Cannot open the app. What can I o?

The update for Pages says it is installing however it has been like this for days. Cannot open the app. What can I do?

Double tap the Home button to bring up the multi-tasking bar...tap & hold any app until they all start to wiggle...tap the red minus sign to remove every app shown. Tap the Home button when finished. Try to delete the app now.

Looking for a good replacement for the Palm PDA - that can sync w/ ical

Similar Messages

Maybe you are looking for