Looking for a java-based SDK that handles file conversion to PDF and TIF...

Hi all,
First off, this is my first posting so I'm not 100% sure where to post this topic. So please forgive me if I'm accidentally posting in the wrong location.
My question deals with a project I am currently working on.
I am looking for a java-based SDK that can meet the following requirements...
1) convert all printable file-formats (i.e. JPEG, DOC, TXT, PPT, etc.) into PDF
2) merge multiple PDFs into one PDF
3) convert PDF to TIF or at least do some sort of conversion to TIF
4) works in Java or some sort of web-based language
5) free or relatively cheap
Any advice/suggestions would be greatly appreciated.
Thank you very much.

I don't think you will get one API to do them all.
Some helpful hints:
[http://schmidt.devlib.org/java/libraries-pdf.html]
[http://xmlgraphics.apache.org/fop/] (with the pdf-image extension, that I can't find now :shakefist)
JAI

Similar Messages

I am looking for a way to convert Microsoft Office files to my apple and back again

I am looking for a way to convert Microsoft Office files to my apple and vise vera.
<Re-Titled By Host>

you are asking about Microsoft products and using a laptop, not a workstation Mac Pro.
The Numbers and Pages Apple Communities. or MS Community if you want those.
Importing and Exporting, but Numbers and Pages will not do a SAVE into other formats by default, and therefore have to keep using Export which is messy.
Changing your own thread midstream may not be ['thread hijack'] but it is like having the rug pulled out by changing the subject on us.

I'm looking for a multiple charging station that will charge both iPhone 4S and iPhone 5. Any suggestions?

Our household now has 2 iPhone 4S's, an iPhone 5, a first generation iPad, and a new iPad mini. The wires are driving me nuts. Is there anything out there that will allow me to charge all of these devices in one place?

I have your solution....custom built charging stations for whatever devices you have. I build these one at a time and can sell through Etsy or direct person-to-person using PayPal. My design is unique because the device can remain upright while the cord remains plugged in at the bottom. Best way to contact me is through my website at www.hidemycharger.com. The site is really nothing more than a photo gallery of my work...(this is just a simple mans way of doing business). If you think this is not legitimate, go to Etsy.com and search for my shop JustHoller or search for phone charging stations on Etsy. Here is an example of my work.
Thanks a lot for looking!
RC

I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

That's a very broad question and difficult to answer without knowing more about you requirements.
Try starting on this page Category review: library management software for the Mac |Part I and part II to get a starting point.
regards

I have 300 stores and I'm looking for a global QOS config that would shape/policy the bandwith based on a % of the detected ISP link speed

Hi,
We have 300 stores with mostly the same router config.
The router in each store is a cisco 891 router capable of doing QOS.
Each of our store is connected to internet through a local Internet Service Provider (ISP). They all have different ISP.
Each store has different Internet plan with different speed, some are DSL, other are using cable modem.
The connection between the router and the modem is 100Mbps. But the real speed after the modem will be different depending of the Internet plan the store is using. Exemple : 20Mbps download / 2Mbps upload.
I'm looking for a standard QOS config that would be put in each routeur and that would shape/policy the bandwith based on a % of the detected ISP link speed. The goal here is to prevent a single desktop computer of the store to take all available bandwith of the ISP link because of youtube , cloud photo upload, etc.
Because the wan of the router is in the modem at 100Mbps, I cannot use this bandwith indication for the % calculation. The ISP link speed (after the modem) is much lower than that.
In other words, I dont want to set specific qos value or bandwith manual value in each of my 300 router. Especially because the ISP speed is not the same in each site, it's a big job and it's changing all the time. Stores owner boost their link, etc.
So, Is there a way within the router to detect the Wan real max speed and to assign dynamically % of the deduced value and assign it to different policy-map rules, etc.
regards
Jonathan D

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I'm unaware of any (one) "built-in" feature that will do what you're desire. (BTW, I don't believe PfR, as mentioned by Matt, will do what you desire either, but I've haven't used it in several years.)
I was looking to address a somewhat similar problem several months ago, and believe I could construct dynamic QoS shaping using an embedded device script working with IP SLA monitoring. However, the "problem" site (using a cable modem) closed, so I didn't pursue it further.
An alternative approach would be to use as few policy models as possible. For example if there are sites with 2, 3 or even 5 Mbps uploads, you might use a 2 Mbps shaper for each. Of course, sites with more available bandwidth won't obtain the full advantage of it, but your maintenance support will be easier. Conversely, especially for cable modems, running under their nominal speed might provide much more predictable performance, as HFCs are generally much more variable in their actual available bandwidth, moment to moment.

Ideas for a Java based Thesis

Hi,
does anybody have any good ideas for a Java based Thesis project, something that could be completed in no more than 6 months. I have been working with Servlets & J2ME for over a year, but I'm having trouble coming up with a good/challenging project....
Any help appreciated,
Shane

You can find a ton of potential student projects here:
http://mindprod.com/projects.html
Dunno if any of them fit your criteria - but it's a start...
Good luck!
Grant

Message split on adapter engine for the java based IDoc adapter

Hi Guys,
Do you know if message split on adapter engine is available for the java based IDoc adapter on the single stack (PI 7.31)?
I'm getting such exception when I try to post 3 IDocs
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: Invalid XML 1.0 character encountered within IDocXML for type <ns0:Messages>:
state=EXPECTING_IMMEDIATE_TAG_END, charPosition=68, lineNumber=1, columnNumber=69, invalidChar=U+0078,
sourceSnippet=...UTF-8" standalone="no"?><ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1><...
^
Mapping is one to many.
Each IDoc content has been compared manually against the xsd schema and it was fine.
I know that old way of modifying xsd is still possible.
Best regards,
Wojciech

Did you find a solution to this? Having a similar error right now.
Thanks and kind regards
Jens

I have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced.

Looking for pure Java API to read metadata from an MP4 file.

Hi, I am looking for a pure Java api that can read MP4 metadata. I have been trying to look online for one but have not found anything
suitable. If there are no good api's, can someone point me to resources on how to parse metadata from an MP4, tutorials would be great
as well. I have looked online for that as well but have not found much. Any help would be greatly appreciated.

Cross posted
http://www.java-forums.org/new-java/59652-looking-pure-java-api-read-metadata-mp4-file.html
http://www.coderanch.com/t/580833/Streams/java/Looking-pure-Java-API-read
http://stackoverflow.com/questions/10568588/looking-for-pure-java-api-to-read-metadata-from-an-mp4-file
db

Looking for recommend Java Training

I have just spent a better part of a week trying to work on a java issue. We are running Netweaver 7.01 as our Java server to our BW systems. These NW boxes are Java (stack) only servers. I would like to get more up to speed on managing, debugging, monitoring, etc on the Java side of things. I am not even sure I have the terminolgoy right! What courses have you taken that you feel were effective? Right now my role is DBA (Oracle) and backup R3 Admin. As we move to a more Java rich environment I'd like to help fix things (vs bouncing the server all the time). I feel lost in Visual Administrator. I see to many courses that say "The course does not introduce Netweaver fundamentals and administrations." which is exactly what I feel I need.
Thanks!
Vince

I was meant to go on a combination TEP10 course recently which covers the same contents as ADM200 and EP200, but that's hard to find (and was cancelled where I did find it). If you're just looking for the Java admin basics look at this course tree: https://training.sap.com/za/en/curriculum/adm_java-sap-system-administration-as-java-general-g/.
ADM200 is almost certainly the one you want if you want the shortest (i.e. cheapest!) course focusing on just Java admin, though unfortunately I cannot yet speak from direct experience. Check out the curricula listed for yourself and don't forget to shop around the various SAP Education centres (that link is for South Africa but the curricula for the courses will be the same elsewhere as long as the version is the same). For example see this course tree from the US SAP Centre: https://training.sap.com/us/en/curriculum/ep_adm_us-portal-administration-us/. And don't forget that there are other combination courses like the TEP10 course (e.g. TADM10/TADM12) that might cover even more of what you're looking for - do some digging around to be sure of what you want.

Looking for an Appointment Calendar that does THIS...

I'm a stylist who owns a 700wx with Verizon. I am looking for an appointment calendar app that does ALL of the following?
1. Books 15 minute appointments.
2. Jumps weeks at a time (For example, a client wants to rebook for 6 weeks... I don't want to count the weeks, I want to tap them)
3. Appointments can be booked with contact names. (For example, March 27th at 6pm... book this Contact... >?)
4. Notepad or other type popup for notes (What services, what price, special situations...etc)
Or does anyone know of any Salon Appointment software available for the 700wx?
Post relates to: Treo 700wx (Verizon)

Ok. I didn't see "Attendees" as being the same as Contacts.
I don't want recurring appointments... although I will use it, just more rarely. I want it to jump weeks. (Some salon software has links that actually say "Jump 4 weeks" or 4 weeks, 6 weeks, 8 weeks" etc.
Can it remember appointmnt TYPES? Like, meeting is always 15 minutes, or hilight is always an hour? Or will I always have to specify how long to block? I'm not sure if I'm explaining this correctly. Is there a way to set up preset appointment TYPES and their duration???
Post relates to: Treo 700wx (Verizon)

Looking for a drum loop app that will run in the background. What are you using?

Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.

That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

HT4400 I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

This should be able to help ya out -> Support for wireless braille displays in iOS 6

Looking for a good usb hub that will allow my mouse and external hard to work together

I'm looking for some ideas for a good usb hub that will allow me to use a wireless mouse and an external hard drive at the same time, without shorting out the mouse. The one i currently have, when I plug in just the mouse, it's fine, but as soon as i put the external hard drive into the hub port, the mouse no longer works and i have to reinstall the drivers for the mouse.

Hubs and computers vary in their power needs, but it seems that your setup is lacking in the power department. This isn't a big deal with desktop computers, but since you use a MBP, you're going to do best with a powered USB hub.
If you're looking for a USB hub with power supply, Belkin is generally reliable (and above average in price). But the D-Link is compact, reliable, and has a good price. Aim for a USB 3.0 hub if possible, though 2.0 will work fine with just about anything. Insist on a refund if the hub doesn't work in your system. Make sure it's compact, since you'll be carrrying it around.

When trying to send a link off firefox via email the system looks for a g mail account that I do not have nor want to have. I've told the settings to use my outlook account but it keeps looking for g mail. how do i correct?

when trying to send a link off firefox via email the system looks for a g mail account that I do not have nor want to have. I've told the settings to use my outlook account but it keeps looking for g mail. how do i correct?

http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

Looking for a java-based SDK that handles file conversion to PDF and TIF...

Similar Messages

Maybe you are looking for