Looking for a LabVIEW developer / Test Engineer in Atlanta

Averna at a glance
Averna delivers industry-leading test solutions and services for communications and electronics device makers worldwide, accelerating product development, quality and innovation:
Dynamic: The Averna team thrives on challenges and change, consistently making the prestigious Deloitte Technology Fast 50 list and winning Best in Test and other awards.
Young: The majority of our 300 employees are under 35 years old, and our high-achieving CEO was named to Canada’s Top 40 Under 40.
International: We have offices in Canada, the United States, Mexico, Japan and Hungary, with headquarters in Montreal.
Innovative: We were recently recognized as a Canadian Innovation Leader by the National Research Council Canada (NRC).
Instrumental: Our technology, expertise and drive help our global customers produce market-leading high-tech products in the telecom, transportation, electronics and multimedia sectors.
The challenge of the LabVIEW developer / Test Engineer
As part of the Engineering team, you will be involved in the development and integration of various software programs for validation systems. These systems are renowned for providing fast data throughput and extreme data integrity, while accelerating design cycles and reducing prototyping costs. The Engineering team develops a range of custom data acquisition systems to help our customers obtain accurate measurements and results.
Requirements:
Bachelors degree or college diploma in electrical engineering, software engineering or physics, Masters degree (asset);
3 to 5 years experience in software development with LabVIEW (preferably CLD);
Knowledge of NI TestStand is an asset (Preferably CTD);
Knowledge of video or RF test engineering
Knowledge of FPGA design (either VHDL or LabVIEW FPGA)
Available to travel regularly;
Professionalism, strong communication skills and interpersonal skills;
Team-player, autonomous, self-starter;
Please send your resume to [email protected] and mention the title of the position.

Is this position still opened?

Similar Messages

Need Sr. LabVIEW Development/Controls Engineer in Kyle (Austin), Tx

Xtreme Power Solutions is
currently looking for Sr. LabVIEW Development/Controls Engineer to support the
Battery Energy Storage System Division.
This position will be based in Kyle, TX.
Xtreme Power Solutions delivers
integrated smart power management solutions from 500kW to 100MW. Proprietary
solid-state power management and integrated storage enables efficient and
available power for an environmentally sound 21st century electricity industry.
www.xtremepower.com
Primary Function:
The Sr. LabVIEW Development/Controls Engineer will lead a
small team of LabVIEW developers that is responsible for developing and
maintaining the company’s energy storage SCADA systems. There is Core software that is common to all
customers and customer specific software requirements as well. He designs control systems for XP
products. The position is initially for
a Team Lead, but may develop into a manager role.
Primary Duties:
Lead of
team of four to six LabVIEW or software developers
Work with software
team and project engineers to establish standards and procedures
Writes
LabVIEW Code
Unit Tests
and debugs code
Designs,
validates and maintains control systems.
Mentors
others
Ability to
travel up to 20% in support of
remote sites and/or customer installations
Qualifications
Bachelor of Science in Electrical Engineering or
Computer Science.
National Instruments Certified LabVIEW Architect
(CLA) or equivalent experience
10+ years of experience developing automated
test, measurement, data acquisition, and control systems.
5+ years
of designing, developing, implementing, and debugging LabVIEW and LabVIEW RT
software.
Technical requirements - Hardware
Broad knowledge of instrumentation and data
acquisition technologies including PXI, NI Data Acquisition, LabVIEW Real Time,
NI FPGA, and signal conditioning.
Strong hands-on hardware troubleshooting and
debugging skills.
Technical requirements – Software
Experience using Source Code Control Systems
like Subversion (SVN) and TortoiseSVN.
Familiar with software communication protocols
such at TCP/IP, UDP, and modbus.
Familiar
with all current LabVIEW application architectures.
Experience
connecting LabVIEW to third-party database systems such as MySQL.
Strong
background in architecture design and development.
Good communication
skills, both written and verbal.
Experience creating documentation for large
scale LabVIEW projects spanning VI descriptions to system diagrams.
Experience writing software requirement
specifications.
Excellent people skills, must be a leader.
Previous start-up experience is a plus
Must be a
U.S. Citizen or a Permanent resident.
Please
email resumes to [email protected]. Thank you for your continued interest in
Xtreme Power Solutions, we look forward to being in touch with you.

Sir,
I am an instrumentation and control Engineer with 3+ years
experience.I am worked area is Process and Plant Design,Automobile
testing Machine and test rig Design,Special purpose machine Design.I
have knowledge in program developer of DCS,PLC,HMI,SCADA,LABVIEW as well
as trouble shoot.I am very interested in this job.
Thank you,
Shanmugam.J
+91 984042082

LabVIEW & RF Test Engineer Opportunity - Maryland

Looking for a LabVIEW developer with experience in RF system test and measurement to join an exceptional team in the Columbia, Maryland area. The position is time-critical - if you're contemplating a career change and meet the qualifications, please contact us at:
[email protected]
We're looking for someone to test Radio Frequency antennas, filters, and processors integrated in data communication components. Activities would include:
- Develop and execute technical tests using the LavView software program
- Document and test LabView based test scripts, routines, and processes using provided guidelines and information
- Perform environmental testing of electronic devices
- Document reusable software modules and interfaces
- Document reusable test hardware modules including electrical interfaces, and specifications
- Document all test results in the DIAdem reporting tool format
- Maintain libraries and data files with Tortoise SVN version control, a Subversion client embedded program that automates Configuration Management for the tests.
The ideal candidate will:
- Hold a U.S. Government Top Secret/SCI clearance.
- Be certified by National Instruments as a Labview Associate Developer and have a minimum of two (2) years of experience.
- Have a data communications background including experience with these interfaces: serial, BDI telnet, GPIB, Firebird 6000 LAB
- Be familiar and able to write programs for the National Instruments PXI platform, create reports using National Instruments Diadem, and create and distribute executables using Labview Application Builder
- Have a minimum of one (1) year experience in electronics troubleshooting and solder station rework.

Hi;
I am a cetified lab view Developer have 2.8 years in Labview and 1 year of experience in Telecom as RF Engine
Herin i am attaching my resume.
Regards
Sandeep Soni
[email protected]
+919922958092
Attachments:
Sandeep_Resume.doc ‏82 KB

Looking for a Labview job. Any offers or suggestions?

Hi, everybody!
I wish we had labview.jobs or something. Since we have not yet,
I would appreciate any hints regarding looking for a Labview job,
especially for people with just 1 year of experience,
beside emailing everybody on the NI Alliance list and searching
general purpose job sites.
In case prospective employers read this, my cover letter and resume follow:
Dear Manager:
Thank you for taking time out of your busy schedule.
You will find that my resume which is attached,
outlines why I am an excellent fit for a
position with your company. In addition to my broad
educational background including two Masters degrees
in Electrical Engineering and Physics, numerous
Computer Science courses taken, and ten years of
diverse experience in programming and system
administration and support, I have just finished a
successful control and data acquisition project in
Labview which is also described in my resume.
My experience and background enable me
to master any software development tool and/or
environment very quickly, which makes me a perfect
candidate who can always keep up with the
ever-changing world of computer technologies.
I am looking forward to discussing this opportunity
with you.
Sincerely,
Stanislav Rumega
2000 Goldsworth Valley, Apt. #X-5
Kalamazoo, MI 49008
Telephone: (616) 387-5967
[email protected]
http://free.prohosting.com/~styrum/webresume.shtml
OBJECTIVE:
To obtain a full-time Software Engineer, Developer,
Programmer, or Analyst position after graduation from
Western Michigan University in April 2000. Willing to
consider positions that are usually offered to
candidates with BS degrees too.
SUMMARY:
- Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
HTML, SPARC Assembler;
- Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
- Software: LabVIEW, Maple V, FoxPro, MS Word,
MS Excel, CorelDraw , Internet Explorer, Netscape
Navigator, various utilities and other packages;
- Fluent in English and Russian.
EXPERIENCE:
Teaching/Research Assistant, 1997 - Present
Department of Physics, Western Michigan University,
Kalamazoo, MI
- Taught undergraduate physics labs;
- Graded student papers;
Project:
Developed a control and data acquisition program for
an electron spectrometer system in the WMU accelerator
laboratory. The program was written in LABVIEW.
The project involved controlling and retrieving
data from devices on a CAMAC crate as well as
GPIB (IEEE-488) instruments connected to the system
via a GPIB to CAMAC interface. A computer communicated
with the system via a serial (RS-232) port on the
crate controller.
Engineer/Programmer, 1993-1997
The Association FACTORIAL-SERVICE, Rostov-na-Donu,
Russia
- Supported all the available computer resources and
other equipment (a phone switching system, phones,
faxes, copiers, etc.);
- Selected, purchased, installed, configured all the
hardware and software used at the office;
- Installed and administered a LAN;
- Designed and coded applications;
- Fine-tuned complicated off-the-shelf Accounting and
Sales software which had their own built-in
languages and required programming;
- Trained users;
- Provided translations between English and Russian.
Engineer/Programmer, 1992-1993
Joint Stock Company TRANSINFORM, Moscow, Russia
- Provided some preparatory work and marketing for
the introduction of an X.25 packet-switched
computer network in Rostov-na-Donu, Russia.
Engineer/Programmer, 1991-1992
Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
Moscow, Russia
- Developed a FoxPro application to calculate traffic
accident rates depending on road conditions.
EDUCATION:
Candidate for Master of Arts in Physics,
1997 - Present Western Michigan University,
Kalamazoo, Michigan
Anticipated graduation date: 04/00.
Computer Science GPA: 3.8,
Overall GPA: 3.4 on a 4.0 scale.
Computer Science courses taken:
- Computer Science II (Object-Oriented C++
Programming);
- System Programming Concepts (UNIX, C);
- Computer Organization and Assembly Language
(SPARC);
- Principles of Database Management Systems (SQL,
PL/SQL);
- Data and File Structures (C++);
- Programming in Maple V;
- Programming Languages (Principles of Programming
Languages, Web Programming: HTML, Java).
Awards:
- Dean's List, 1998-1999;
- David Carley Memorial Award, 1998;
- Department Award for Graduate Student Teaching
Effectiveness,1999.
5-yr. Diploma in Radiophysics and Electronics,
an equivalent of an MS in Electrical Engineering,
1991 Rostov State University,
Rostov-na-Donu, Russia
Numerous courses in Mathematics, Physics, and Computer
Science taken.
GPA: 4.7 on a 5.0 scale.
Project: Developed a simulation of a conveyor
multiprocessor system. The program was written
in Pascal.
Awards:
- Received a higher stipend for high academic
achievements every semester, 1984-1987,
1989-1991.
ACTIVITIES:
- Graduate Student Advisory Committee, Member,
1999-2000;
- Association of Information Technology
Professionals, WMU Student Chapter, Member,
1999-2000.
- Volunteer Student Safety Patrol, 1989-1991.
WORK AUTHORIZATION:
Authorized to work in US for 12 months after
graduation, which can be extended for up to
6 years with employer's help through
petitioning for a working visa.
In Canada, an employment authorization (EA) must be
obtained before starting employment.
REFERENCES:
Available upon request.

Forgot to mention - go to any jobs web site and enter LabVIEW as a keyword - for
example, I went to http://www.monster.com/ and found 301 postings.
"John D. Seelbinder" wrote:
> Viewpoint Software Solutions is looking for a software engineer with LabView
> experience:
> http://www.viewpointusa.com/employment.html
>
> FWIW I do not work for, or have a financial interest in Viewpoint Software
> Solutions.
>
> Stanislav Rumega wrote:
>
> > Hi, everybody!
> >
> > I wish we had labview.jobs or something. Since we have not yet,
> > I would appreciate any hints regarding looking for a Labview job,
> > especially for people with just 1 year of experience,
> > beside emailing everybody on the NI Alliance list and searching
> > general purpose job sites.
> >
> > In case prospective employers read this, my cover letter and resume follow:
> >
> > Dear Manager:
> >
> > Thank you for taking time out of your busy schedule.
> > You will find that my resume which is attached,
> > outlines why I am an excellent fit for a
> > position with your company. In addition to my broad
> > educational background including two Masters degrees
> > in Electrical Engineering and Physics, numerous
> > Computer Science courses taken, and ten years of
> > diverse experience in programming and system
> > administration and support, I have just finished a
> > successful control and data acquisition project in
> > Labview which is also described in my resume.
> > My experience and background enable me
> > to master any software development tool and/or
> > environment very quickly, which makes me a perfect
> > candidate who can always keep up with the
> > ever-changing world of computer technologies.
> >
> > I am looking forward to discussing this opportunity
> > with you.
> >
> > Sincerely,
> >
> > Stanislav Rumega
> > 2000 Goldsworth Valley, Apt. #X-5
> > Kalamazoo, MI 49008
> > Telephone: (616) 387-5967
> > [email protected]
> > http://free.prohosting.com/~styrum/webresume.shtml
> >
> > OBJECTIVE:
> > To obtain a full-time Software Engineer, Developer,
> > Programmer, or Analyst position after graduation from
> > Western Michigan University in April 2000. Willing to
> > consider positions that are usually offered to
> > candidates with BS degrees too.
> >
> > SUMMARY:
> > - Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
> > HTML, SPARC Assembler;
> > - Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
> > - Software: LabVIEW, Maple V, FoxPro, MS Word,
> > MS Excel, CorelDraw , Internet Explorer, Netscape
> > Navigator, various utilities and other packages;
> > - Fluent in English and Russian.
> >
> > EXPERIENCE:
> >
> > Teaching/Research Assistant, 1997 - Present
> > Department of Physics, Western Michigan University,
> > Kalamazoo, MI
> > - Taught undergraduate physics labs;
> > - Graded student papers;
> >
> > Project:
> > Developed a control and data acquisition program for
> > an electron spectrometer system in the WMU accelerator
> > laboratory. The program was written in LABVIEW.
> > The project involved controlling and retrieving
> > data from devices on a CAMAC crate as well as
> > GPIB (IEEE-488) instruments connected to the system
> > via a GPIB to CAMAC interface. A computer communicated
> > with the system via a serial (RS-232) port on the
> > crate controller.
> >
> > Engineer/Programmer, 1993-1997
> > The Association FACTORIAL-SERVICE, Rostov-na-Donu,
> > Russia
> >
> > - Supported all the available computer resources and
> > other equipment (a phone switching system, phones,
> > faxes, copiers, etc.);
> > - Selected, purchased, installed, configured all the
> > hardware and software used at the office;
> > - Installed and administered a LAN;
> > - Designed and coded applications;
> > - Fine-tuned complicated off-the-shelf Accounting and
> > Sales software which had their own built-in
> > languages and required programming;
> > - Trained users;
> > - Provided translations between English and Russian.
> >
> > Engineer/Programmer, 1992-1993
> > Joint Stock Company TRANSINFORM, Moscow, Russia
> >
> > - Provided some preparatory work and marketing for
> > the introduction of an X.25 packet-switched
> > computer network in Rostov-na-Donu, Russia.
> >
> > Engineer/Programmer, 1991-1992
> > Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
> > Moscow, Russia
> >
> > - Developed a FoxPro application to calculate traffic
> > accident rates depending on road conditions.
> >
> > EDUCATION:
> >
> > Candidate for Master of Arts in Physics,
> > 1997 - Present Western Michigan University,
> > Kalamazoo, Michigan
> >
> > Anticipated graduation date: 04/00.
> > Computer Science GPA: 3.8,
> > Overall GPA: 3.4 on a 4.0 scale.
> >
> > Computer Science courses taken:
> > - Computer Science II (Object-Oriented C++
> > Programming);
> > - System Programming Concepts (UNIX, C);
> > - Computer Organization and Assembly Language
> > (SPARC);
> > - Principles of Database Management Systems (SQL,
> > PL/SQL);
> > - Data and File Structures (C++);
> > - Programming in Maple V;
> > - Programming Languages (Principles of Programming
> > Languages, Web Programming: HTML, Java).
> >
> > Awards:
> > - Dean's List, 1998-1999;
> > - David Carley Memorial Award, 1998;
> > - Department Award for Graduate Student Teaching
> > Effectiveness,1999.
> >
> > 5-yr. Diploma in Radiophysics and Electronics,
> > an equivalent of an MS in Electrical Engineering,
> > 1991 Rostov State University,
> > Rostov-na-Donu, Russia
> >
> > Numerous courses in Mathematics, Physics, and Computer
> > Science taken.
> > GPA: 4.7 on a 5.0 scale.
> >
> > Project: Developed a simulation of a conveyor
> > multiprocessor system. The program was written
> > in Pascal.
> >
> > Awards:
> > - Received a higher stipend for high academic
> > achievements every semester, 1984-1987,
> > 1989-1991.
> >
> > ACTIVITIES:
> > - Graduate Student Advisory Committee, Member,
> > 1999-2000;
> > - Association of Information Technology
> > Professionals, WMU Student Chapter, Member,
> > 1999-2000.
> > - Volunteer Student Safety Patrol, 1989-1991.
> >
> > WORK AUTHORIZATION:
> > Authorized to work in US for 12 months after
> > graduation, which can be extended for up to
> > 6 years with employer's help through
> > petitioning for a working visa.
> > In Canada, an employment authorization (EA) must be
> > obtained before starting employment.
> >
> > REFERENCES:
> > Available upon request.

How to look for kMAT material in Testing client?

Hi PP members:
How to look for KMAT material in Test client,
Note: I went to mm60 and entered material type: KMAT it did not populate any
materials
Is there any way where I can find the materials, If yes please let me know
thanks
Suren

Hi Saritha:
When I went to SE16, and entered MTART as KMAT it giving the following
It is replying me back "No table entries found for specified key"
Also want to bring to your kind attention I left MATNR field blank as I donot know
the VC materials
thanks

Looking for a Apple developer to help me create an application

Looking for a Apple developer to help me create an application

Sure, but I meant he/she could sign up, and then see who is asking questions in the right sort of market area and potentially make contact that way ?

I am looking for a good development application for IOS. Please help me.Thanks.

I am looking for a good development application for IOS. Please help me.Thanks.

Xcode is required to submit your app to the App Store. So at some point (even if it is just to submit) you will need to use it.

Small Company looking for a LabVIEW consultant (remote consultant welcome)

Hello,
We are a small company looking for a LabVIEW consultant. This is about a 3-6 month project. The consultant must be familiar with NI hardware product as well. Please send me your resume/CV. In your email please state the following: years of experience, educational background, your hourly requirements, your location, and the amount of time you will be able to provide.
Please removes spaces on the email below.
int e g r at e d devi c e s @ yah oo. c o m

I'm not sure if this is frequent on the NI forums, since I believe NI validates user information prior to issuing an account that allows them to post to the forum. But usernames (like mine) don't provide immediate identifications; you have to ask for it.
Apparently Job Scams have become more frequent. See the list of tips on the following site, (I have no relationship with this site. It just came up in a google search).
http://www.identityhawk.com/IdentityProtectionTips-inHonorof-LaborDay
5 Steps to Take Before Applying for a Job
1. Email - the company to get information about the job. Do not provide any personal information to them upfront.
2. Phone - speak to an official at the company and ask about the job. Be assured that it is legitimate.
3. Meet - at the company site to assure it is a real company. If you cannot meet, and the company is in your town, drive by to see the facility, (possibly using google maps to view the site).
4. Verify - see if you can find a person who has worked at the company or call a Chamber of Commerce of Better Business Bureau to assure the legitimacy of the company. Search online for legitimate information about the company, search online for any complaints of non-legitimacy. State Entity sites typically have the name of the company and how long they have been in business.
5. Apply - once you are assured the company is legitimate, it is safe to apply; but you should still not supply highly personal information like bank accounts until you are officially hired.

Looking for a LabVIEW Test Engineer for Crane Aerospace and Electronics

Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.

Is this position still opened?

Looking for a LabVIEW Rest Engineer ofr an Aerospace company.

Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.

Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.

Electromechanical Engineer Looking for Interesting LabView telecomute work.

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

Looking for a labview virtual instrument program we can modify

Hi, I’m looking for a canned labview virtual instrument program we can modify for the OMB DAQ 55 from Omega to measure three temps and control three DO. I have the driver at:ftp://ftp.omega.com/public/DASGroup/products/OMB-DAQ5455&56/ The driver is labviewpdaq5xsetup.exe. I have the OMB DAQ 55 from http://www.omega.com/pptst/OMB-Daq55.html with a USB interface. I am trying to set it up to control a 24V electric valve. I’d like it to measure temperatures (5 separate temps), allow a set point to be programmed for three of them and turn on and off a DO based on the temperature. PID is not required yet. Maybe in the future… We have labview 7.1 and 8.0 but my colleague prefers 7.1 Do you have an labview VI programs that you can share that will do this with the DAQ 55? If you have something that will be close, we can modify it. But starting from scratch will likely mean we can not get this done in time for a project test. Simple set point and control is all I’m looking for… I’m new (my colleague knows it better than me, but has less time) to labview and do not have the resources to learn it from scratch to figure this out. Is there something you have I could modify? Can you help. Or are there canned programs you have that will do this? Labview is the preferred language. Thanks. Attached is what Omega shared with us, it might help…it’s a screen capture from a similar program, but far from the mark.

Hi vestel,
These discussion forums are more geared for questions - not necessarily having everyone else code for you.
You have a few options if you want code.
1) Look at the shipping examples that come with LabVIEW. This will give you a starting point from which to ask questions.
2) Look at the Instrument Driver Network that exits on National Instrument's Web site. Here are all the Omega instrument drivers listed.
3) Look at the list of Alliance members who you can pay to develop your code for you. Look here.
I hope this helps,
Kevin S.
Applications Engineer
National Instruments

BD Biosciences Seeking a Labview Programmer/Test Engineer

BD Biosciences located in San Jose, CA is currently seeking a Sr. Test Engineer to join our exciting and growing team.
About BD: BD Biosciences, a segment of BD, is one of the world’s leading businesses focused on bringing innovative research and clinical tools to life scientists and clinicians. Principal product lines include fluorescence activated cell sorters and analyzers; cell imaging systems; monoclonal antibodies and kits; research reagent systems; tools to aid in drug discovery and growing tissue and cells; and diagnostic assays. Its customers are involved in basic research, the discovery and development of drugs and vaccines, clinical trials, diagnostic testing and disease management. This diverse customer base includes academic and government institutions, pharmaceutical and biotech companies, and clinical laboratories.
The successful candidate will have hands on experience in the development of automated test solutions for PCBs and system level testing. The ideal candidate will be proficient in Labview programming. This engineer will be an integral part of the new product design teams and will be responsible for creating test that can deployed into the manufacturing environment.
The incumbent will be responsible for creating automated custom test fixtures utilizing custom or off the shelf hardware and the Labview software application as well as the testing of fixture development to include PCBs and system level testing for a complex medical analysis instrument. Responsibilities will also include planning, developing, and supporting introductions, generating and maintaining test plans, test software, and hardware fixtures for both onsite and offsite locations. The selected individual will provide timely and concise status updates as they pertain to metrics and issue resolution to the technical lead and/or project manager.
Requirements:
Experience with Labview within Windows OS. Labview TestStand a plus.
Knowledge of advanced hardware test engineering methods such as Boundary Scan a plus.
Ability to design and document interface test adapters and cabling to connect to UUT.
Knowledge of software development process and methodology.
Experience in automating tests for manufacturing environments
Experience in custom hardware.
Knowledge of C, C++, or Visual basic a plus.
5 years experience in Software Development or a related field and a Bachelors degree in Computer Science, Electrical Engineering, Computer Engineering, orsimilar field
Interested individuals please send resume to [email protected]:
Troy Roessler
Recruiter
BD Biosciences
2350 Qume Drive
San Jose, CA 95131
(408) 954-2299
[email protected]
BD BIOSCIENCES IS AN EQUAL OPPORTUNITY & AFFIRMATIVE ACTION EMPLOYER.

Eon Nurse
514-333-1622

Appcelerator has 2 positions - looking for IDE Sr. Developer and Sr. QE

Here are the details of open positions. Send me your profile (to pinnamur at gmail dot com) if you are interested to work on the IDE tools in a fast growing and most visionary mobile company.
- Sr. Software Engineer (Titanium Studio)
Immediate opening for a talented engineer to work on our Titanium Studio team designing and building developer-focused applications created to make coding on the Titanium platform as simple and enjoyable as possible. Ideal candidates not only have experience as a software engineer writing code, but also have been involved in leading the architecture, design and implementation of best-of-class tools targeting the developer market.
RESPONSIBILITIES:
Define, design and implement exciting new product features in Studio
Work closely with platform and cloud teams to expose new functionality to developers
Review code and write unit tests
- Lead/Sr. Software Quality Engineer - IDE
We are looking for someone who loves to break code and work closely with engineering to make sure it gets fixed and released as a first-class product. You'll be owning the Appcelerator's Titanium IDE.
RESPONSIBILITIES:
• Create test plans and test cases for the Titanium platform
• Evaluate existing test suites and identify improvements/tests that need to be written
• Ability to clearly communicate expected behavior and steps to reproduce defects, including screenshots and supporting evidence
• Work with software development team to help them identify source of and correct bugs and defects
• Report and follow up on all defects found. Track and verify their resolution
• Posses a willingness to learn new technologies, applications and techniques
• Troubleshoot issues in our entire ecosystem (be they cloud, IDE, SDK or other)

You pay for relocation or are you interested in telecommuters.
Jelqing results

Looking for a Great Flex/Flash Engineer

Hi All,
Apologies if this isn't an appropriate place for posting such a request, but I'm a long-time user of Adobe Flash and Flex. Despite the uncertainty surrounding the future of Flash and Flex we feel it's still the best platform for delivering rich Internet applications. We're on the hunt for a couple great engineers to join our team, and we're thinking some of you might be on the looking for positions that allow you to leverage your Flash and Flex development talents.
Information about the UI position is included below. Please check out http://coincident.com for more information about us and to see our other posting(s).
Thanks!
-jmh
President & Founder
Coincident, Inc.
User Interface Engineer
Coincident. We’d like to make it a household name but we’re going to need your help! We’re a small clean energy company in Boston, Massachusetts and we’re developing an automated energy management platform for residential and small commercial energy consumers.
We think it’s a potential game-changer amongst a sea of competing interests and apparently so does the U.S. Department of Energy. They’ve backed our engineering efforts with innovation research grants to help us commercialize our technology.
We’re on the hunt for a talented programmer with the ability to fuse design and technology like no other. You’ll help craft the user interface components that make our energy management system the most attractive and easy-to-use on the market. Ease-of-use, visual appeal, and intuitive behavior will be your raison d’être. Bring a passion for energy efficiency, rich internet applications, consumer electronics, and mobile development platforms.
This is a paid full-time position offering compensation and equity options commensurate with your experience and ability to make significant contributions to the development of our product.
If this sounds like a job you’d love, keep reading to see what we’re looking for.
Does this sound like you?
Talent for developing dynamic and rich Internet applications
Experience with Adobe Flash, Flex, HTML 5, and JavaScript
Versed in UI development best-practices and supporting technology frameworks
Knack for implementing elegant user interface controls and components
Unparalleled ability to anticipate user behavior and response to designs
Ability to work and collaborate effectively with creative and technical teams
Experience integrating web services and Java server-side technologies
Aptitude for mastering new technologies in short periods of time
Ability to work autonomously on new product features with minimal instruction
Proficiency with vector and bitmap graphics libraries, applications, and tools
Extra credit for mobile development skills for iOS and Android platforms
Coincident is located near South Station in Boston’s Innovation District and is a member company of Greentown Labs, Boston’s first and only clean technology incubator. Resumes and cover letters should be addressed to [email protected].
United States Citizens and Residents only, please.

Another option: I bought a nice one at REI for PWB in March, and now use it for MBP. Has space for my wacom tabet and also small 3x5 or so firewire HD, and of course power adapter and misc stuff. notebook compartment can be removed and carried separately. Very happy with it.
George

Looking for a LabVIEW developer / Test Engineer in Atlanta

Similar Messages

Maybe you are looking for