Looking for a LabVIEW Test Engineer for Crane Aerospace and Electronics
Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.
Is this position still opened?
Similar Messages
-
Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Looking for a LabVIEW Rest Engineer ofr an Aerospace company.
Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible. -
Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc 25 KB -
Immediate need for LabVIEW Test Engineer in San Diego, CA
Greenlight Technical Consulting has an immediate for a LabVIEW Test Engineer to work on site at our client facility in San Diego, CA. For this position we are seeking people that have experience with LabVIEW 8.5 or 8.0. In this role you will be required to assist in the design and evaluation of new systems and the building of test fixtures. You will also be running tests with LabVIEW 8.5. On a limited basis you may be responsible for programming circuits and test fixtures.
The duration of this assignment is for at least 3 months.
Please email your resume to [email protected]
Laird B. Goolsby
Greenlight Technical Consulting, Inc.
225 Broadway Suite 302Hi
I would like to know the working hour. Can it be flexible + weekend?
Thank you -
Looking for a Software/Test Engineer position
Hello, I am looking for a Software/Test Engineer position in London or abroad.
I worked on several projects with Labview and National Instruments hardware (Acquisition and Generator cards).
Please refer to my CV and my LinkedIn profile for additional information.
uk.linkedin.com/pub/jean-félix-majurel/5a/223/a14/
Don't hesitate to contact me for an opportunity.
Best regards,
Jean-Félix Majurel
Attachments:
CV.pdf 316 KBHello DocJ,
We are located far north of Chicago in Gurnee, IL and are accepting resumes for a LabVIEW position. Please send your resume to [email protected]
Thanks -
I am looking for a load testing tool for my flex application
I am looking for a load testing tool for my flex application having a limited budghet of 1000-1500$. I have gone through NEOLoad,WebUiLoad all are very expensive.
Do you have iPad 1 or 2?
You can connect iPad 1 via a VGA adapter to any projector with a VGA input (all projectors have this).
You can connect iPad 2 via VGA or HDMI.
I like Epson or Sony for projectors. -
WANTED: Test Engineer for CCD/CMOS image sensors and cameras...
TEST ENGINEER
Education: BSEE or equivalent
Experience: 5+ years experience in Test Engineering. Preferred experience with Imaging and CCD cameras. Must have programming experience with labview, and experience with other languages is a plus. Must be familiar with standard test equipment such as an oscilloscope, parameter analyzer, etc. Working knowledge of electronic circuits, and familiar with camera parameters. Experience as a technical lead is a plus.
Duties: Characterize and test CCD/CMOS image sensors and cameras. Develop test plans, and create automated test systems. Provide documentation, training and support for systems engineering efforts. Develop quick solutions for engineering camera development efforts to aid in root cause analysis.
Located in Milpitas, California, in the heart of the Silicon Valley, Fairchild Imaging is a pioneer in the CCD industry. We recognize our products are only as good as our people who develop them. We are therefore looking for passionate, innovative people who enjoy the challenges of technology. We offer competitive salaries, outstanding benefits, a 9/80 work schedule and a fun and creative working environment.
U.S. Citizenship or permanent residency required. Fairchild Imaging is an equal opportunity employer.Visit the Fairchild Imaging Website for details on the company and the products. Fairchild Imaging makes a wide spectrum of cameras including Aerospace, scientific and medical and Fairchild Imaging has been producing CCDs since 1975. Our cameras range in pixels size from below 1meg to over 81 meg with pixels down to 8.75u. One of our CCDs was used in the Deep Impact project where a camera was fired into a comet which is one of many interesting projects.
You will be working on a team of 10 dealing with testing of camera systems with responsiblity for test at the wafer level to finished camera. This is a great opportunity to work with a talented staff with a interesting mix of products. -
LabVIEW test engineer opening in Penang, Malaysia
Specific Skills Required:
Experience in developing, deploying, and supporting test processes for telecommunications systems.
Detailed understanding of networking systems and protocols including TCP/IP, DHCP. SNMP, ATM, and Frame Relay.
Experience in developing automated scripts using TLC/Perl and in developing and testing client devices in a Windows environment.
Extensive Unix experience is essential.
Experience in developing test automation applications for telecommunications products utilizing National Instruments LabView and TestStand.
Strong communications skills, both written and oral, to enable clear and concise communication with internal and external personnel at all levels of management.
Excellent organizational skills to simultaneously and independently manage multiple tasks with both internal customers and external suppliers.I guess this answers my question.
-
Looking for Federal Financials Test Scripts for R12 or 11i
Hello, we are under the gun to finish test scripts by 30 April 09. I have created several standard test scripts, but need scripts on the Federal Financials side (i.e. appropriations, apportionments, re-apportionments, allotments, transfers, IPAC, SF224, FACTS I & II, SF 133)
Please send any scripts you might have to [email protected]
Thank you!
LisaMariePlease clarify that you are looking to test Oracle Forms.
-
Laptop configuration for using VM test environment for ORALCE
Guys,
I would like to setup an VM environment for learning ORACLE on laptop. What sort of configuration of laptop will be good for making use of it?
Regards,
sakthivelHi Sakthi,
That depends on the requirement of your testing.I would recommend you Min 4GB RAM (If it includes RAC testing) too. -
Looking for a labview virtual instrument program we can modify
Hi, I’m looking for a canned labview virtual instrument program we can modify for the OMB DAQ 55 from Omega to measure three temps and control three DO. I have the driver at:ftp://ftp.omega.com/public/DASGroup/products/OMB-DAQ5455&56/ The driver is labviewpdaq5xsetup.exe. I have the OMB DAQ 55 from http://www.omega.com/pptst/OMB-Daq55.html with a USB interface. I am trying to set it up to control a 24V electric valve. I’d like it to measure temperatures (5 separate temps), allow a set point to be programmed for three of them and turn on and off a DO based on the temperature. PID is not required yet. Maybe in the future… We have labview 7.1 and 8.0 but my colleague prefers 7.1 Do you have an labview VI programs that you can share that will do this with the DAQ 55? If you have something that will be close, we can modify it. But starting from scratch will likely mean we can not get this done in time for a project test. Simple set point and control is all I’m looking for… I’m new (my colleague knows it better than me, but has less time) to labview and do not have the resources to learn it from scratch to figure this out. Is there something you have I could modify? Can you help. Or are there canned programs you have that will do this? Labview is the preferred language. Thanks. Attached is what Omega shared with us, it might help…it’s a screen capture from a similar program, but far from the mark.
Hi vestel,
These discussion forums are more geared for questions - not necessarily having everyone else code for you.
You have a few options if you want code.
1) Look at the shipping examples that come with LabVIEW. This will give you a starting point from which to ask questions.
2) Look at the Instrument Driver Network that exits on National Instrument's Web site. Here are all the Omega instrument drivers listed.
3) Look at the list of Alliance members who you can pay to develop your code for you. Look here.
I hope this helps,
Kevin S.
Applications Engineer
National Instruments -
Looking for a Labview job. Any offers or suggestion​s?
Hi, everybody!
I wish we had labview.jobs or something. Since we have not yet,
I would appreciate any hints regarding looking for a Labview job,
especially for people with just 1 year of experience,
beside emailing everybody on the NI Alliance list and searching
general purpose job sites.
In case prospective employers read this, my cover letter and resume follow:
Dear Manager:
Thank you for taking time out of your busy schedule.
You will find that my resume which is attached,
outlines why I am an excellent fit for a
position with your company. In addition to my broad
educational background including two Masters degrees
in Electrical Engineering and Physics, numerous
Computer Science courses taken, and ten years of
diverse experience in programming and system
administration and support, I have just finished a
successful control and data acquisition project in
Labview which is also described in my resume.
My experience and background enable me
to master any software development tool and/or
environment very quickly, which makes me a perfect
candidate who can always keep up with the
ever-changing world of computer technologies.
I am looking forward to discussing this opportunity
with you.
Sincerely,
Stanislav Rumega
2000 Goldsworth Valley, Apt. #X-5
Kalamazoo, MI 49008
Telephone: (616) 387-5967
[email protected]
http://free.prohosting.com/~styrum/webresume.shtml
OBJECTIVE:
To obtain a full-time Software Engineer, Developer,
Programmer, or Analyst position after graduation from
Western Michigan University in April 2000. Willing to
consider positions that are usually offered to
candidates with BS degrees too.
SUMMARY:
- Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
HTML, SPARC Assembler;
- Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
- Software: LabVIEW, Maple V, FoxPro, MS Word,
MS Excel, CorelDraw , Internet Explorer, Netscape
Navigator, various utilities and other packages;
- Fluent in English and Russian.
EXPERIENCE:
Teaching/Research Assistant, 1997 - Present
Department of Physics, Western Michigan University,
Kalamazoo, MI
- Taught undergraduate physics labs;
- Graded student papers;
Project:
Developed a control and data acquisition program for
an electron spectrometer system in the WMU accelerator
laboratory. The program was written in LABVIEW.
The project involved controlling and retrieving
data from devices on a CAMAC crate as well as
GPIB (IEEE-488) instruments connected to the system
via a GPIB to CAMAC interface. A computer communicated
with the system via a serial (RS-232) port on the
crate controller.
Engineer/Programmer, 1993-1997
The Association FACTORIAL-SERVICE, Rostov-na-Donu,
Russia
- Supported all the available computer resources and
other equipment (a phone switching system, phones,
faxes, copiers, etc.);
- Selected, purchased, installed, configured all the
hardware and software used at the office;
- Installed and administered a LAN;
- Designed and coded applications;
- Fine-tuned complicated off-the-shelf Accounting and
Sales software which had their own built-in
languages and required programming;
- Trained users;
- Provided translations between English and Russian.
Engineer/Programmer, 1992-1993
Joint Stock Company TRANSINFORM, Moscow, Russia
- Provided some preparatory work and marketing for
the introduction of an X.25 packet-switched
computer network in Rostov-na-Donu, Russia.
Engineer/Programmer, 1991-1992
Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
Moscow, Russia
- Developed a FoxPro application to calculate traffic
accident rates depending on road conditions.
EDUCATION:
Candidate for Master of Arts in Physics,
1997 - Present Western Michigan University,
Kalamazoo, Michigan
Anticipated graduation date: 04/00.
Computer Science GPA: 3.8,
Overall GPA: 3.4 on a 4.0 scale.
Computer Science courses taken:
- Computer Science II (Object-Oriented C++
Programming);
- System Programming Concepts (UNIX, C);
- Computer Organization and Assembly Language
(SPARC);
- Principles of Database Management Systems (SQL,
PL/SQL);
- Data and File Structures (C++);
- Programming in Maple V;
- Programming Languages (Principles of Programming
Languages, Web Programming: HTML, Java).
Awards:
- Dean's List, 1998-1999;
- David Carley Memorial Award, 1998;
- Department Award for Graduate Student Teaching
Effectiveness,1999.
5-yr. Diploma in Radiophysics and Electronics,
an equivalent of an MS in Electrical Engineering,
1991 Rostov State University,
Rostov-na-Donu, Russia
Numerous courses in Mathematics, Physics, and Computer
Science taken.
GPA: 4.7 on a 5.0 scale.
Project: Developed a simulation of a conveyor
multiprocessor system. The program was written
in Pascal.
Awards:
- Received a higher stipend for high academic
achievements every semester, 1984-1987,
1989-1991.
ACTIVITIES:
- Graduate Student Advisory Committee, Member,
1999-2000;
- Association of Information Technology
Professionals, WMU Student Chapter, Member,
1999-2000.
- Volunteer Student Safety Patrol, 1989-1991.
WORK AUTHORIZATION:
Authorized to work in US for 12 months after
graduation, which can be extended for up to
6 years with employer's help through
petitioning for a working visa.
In Canada, an employment authorization (EA) must be
obtained before starting employment.
REFERENCES:
Available upon request.Forgot to mention - go to any jobs web site and enter LabVIEW as a keyword - for
example, I went to http://www.monster.com/ and found 301 postings.
"John D. Seelbinder" wrote:
> Viewpoint Software Solutions is looking for a software engineer with LabView
> experience:
> http://www.viewpointusa.com/employment.html
>
> FWIW I do not work for, or have a financial interest in Viewpoint Software
> Solutions.
>
> Stanislav Rumega wrote:
>
> > Hi, everybody!
> >
> > I wish we had labview.jobs or something. Since we have not yet,
> > I would appreciate any hints regarding looking for a Labview job,
> > especially for people with just 1 year of experience,
> > beside emailing everybody on the NI Alliance list and searching
> > general purpose job sites.
> >
> > In case prospective employers read this, my cover letter and resume follow:
> >
> > Dear Manager:
> >
> > Thank you for taking time out of your busy schedule.
> > You will find that my resume which is attached,
> > outlines why I am an excellent fit for a
> > position with your company. In addition to my broad
> > educational background including two Masters degrees
> > in Electrical Engineering and Physics, numerous
> > Computer Science courses taken, and ten years of
> > diverse experience in programming and system
> > administration and support, I have just finished a
> > successful control and data acquisition project in
> > Labview which is also described in my resume.
> > My experience and background enable me
> > to master any software development tool and/or
> > environment very quickly, which makes me a perfect
> > candidate who can always keep up with the
> > ever-changing world of computer technologies.
> >
> > I am looking forward to discussing this opportunity
> > with you.
> >
> > Sincerely,
> >
> > Stanislav Rumega
> > 2000 Goldsworth Valley, Apt. #X-5
> > Kalamazoo, MI 49008
> > Telephone: (616) 387-5967
> > [email protected]
> > http://free.prohosting.com/~styrum/webresume.shtml
> >
> > OBJECTIVE:
> > To obtain a full-time Software Engineer, Developer,
> > Programmer, or Analyst position after graduation from
> > Western Michigan University in April 2000. Willing to
> > consider positions that are usually offered to
> > candidates with BS degrees too.
> >
> > SUMMARY:
> > - Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
> > HTML, SPARC Assembler;
> > - Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
> > - Software: LabVIEW, Maple V, FoxPro, MS Word,
> > MS Excel, CorelDraw , Internet Explorer, Netscape
> > Navigator, various utilities and other packages;
> > - Fluent in English and Russian.
> >
> > EXPERIENCE:
> >
> > Teaching/Research Assistant, 1997 - Present
> > Department of Physics, Western Michigan University,
> > Kalamazoo, MI
> > - Taught undergraduate physics labs;
> > - Graded student papers;
> >
> > Project:
> > Developed a control and data acquisition program for
> > an electron spectrometer system in the WMU accelerator
> > laboratory. The program was written in LABVIEW.
> > The project involved controlling and retrieving
> > data from devices on a CAMAC crate as well as
> > GPIB (IEEE-488) instruments connected to the system
> > via a GPIB to CAMAC interface. A computer communicated
> > with the system via a serial (RS-232) port on the
> > crate controller.
> >
> > Engineer/Programmer, 1993-1997
> > The Association FACTORIAL-SERVICE, Rostov-na-Donu,
> > Russia
> >
> > - Supported all the available computer resources and
> > other equipment (a phone switching system, phones,
> > faxes, copiers, etc.);
> > - Selected, purchased, installed, configured all the
> > hardware and software used at the office;
> > - Installed and administered a LAN;
> > - Designed and coded applications;
> > - Fine-tuned complicated off-the-shelf Accounting and
> > Sales software which had their own built-in
> > languages and required programming;
> > - Trained users;
> > - Provided translations between English and Russian.
> >
> > Engineer/Programmer, 1992-1993
> > Joint Stock Company TRANSINFORM, Moscow, Russia
> >
> > - Provided some preparatory work and marketing for
> > the introduction of an X.25 packet-switched
> > computer network in Rostov-na-Donu, Russia.
> >
> > Engineer/Programmer, 1991-1992
> > Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
> > Moscow, Russia
> >
> > - Developed a FoxPro application to calculate traffic
> > accident rates depending on road conditions.
> >
> > EDUCATION:
> >
> > Candidate for Master of Arts in Physics,
> > 1997 - Present Western Michigan University,
> > Kalamazoo, Michigan
> >
> > Anticipated graduation date: 04/00.
> > Computer Science GPA: 3.8,
> > Overall GPA: 3.4 on a 4.0 scale.
> >
> > Computer Science courses taken:
> > - Computer Science II (Object-Oriented C++
> > Programming);
> > - System Programming Concepts (UNIX, C);
> > - Computer Organization and Assembly Language
> > (SPARC);
> > - Principles of Database Management Systems (SQL,
> > PL/SQL);
> > - Data and File Structures (C++);
> > - Programming in Maple V;
> > - Programming Languages (Principles of Programming
> > Languages, Web Programming: HTML, Java).
> >
> > Awards:
> > - Dean's List, 1998-1999;
> > - David Carley Memorial Award, 1998;
> > - Department Award for Graduate Student Teaching
> > Effectiveness,1999.
> >
> > 5-yr. Diploma in Radiophysics and Electronics,
> > an equivalent of an MS in Electrical Engineering,
> > 1991 Rostov State University,
> > Rostov-na-Donu, Russia
> >
> > Numerous courses in Mathematics, Physics, and Computer
> > Science taken.
> > GPA: 4.7 on a 5.0 scale.
> >
> > Project: Developed a simulation of a conveyor
> > multiprocessor system. The program was written
> > in Pascal.
> >
> > Awards:
> > - Received a higher stipend for high academic
> > achievements every semester, 1984-1987,
> > 1989-1991.
> >
> > ACTIVITIES:
> > - Graduate Student Advisory Committee, Member,
> > 1999-2000;
> > - Association of Information Technology
> > Professionals, WMU Student Chapter, Member,
> > 1999-2000.
> > - Volunteer Student Safety Patrol, 1989-1991.
> >
> > WORK AUTHORIZATION:
> > Authorized to work in US for 12 months after
> > graduation, which can be extended for up to
> > 6 years with employer's help through
> > petitioning for a working visa.
> > In Canada, an employment authorization (EA) must be
> > obtained before starting employment.
> >
> > REFERENCES:
> > Available upon request. -
Sr. Test Engineer w/ Labview experience position immediately available, Wisconsin
Our client, a leading provider for electronic components for automotive engines is looking for a Sr Test Engineer. This is a 1-2yr contract position. Phone to hire.
Must be degreed
2-7yrs experience w/ Labview
Understands analog and digital circuitry
Experience w/ electronic functional test systems
If interested in hearing more please send your resume to [email protected] or call 888-431-6300 x1020. I look forward to hearing from you.
Respectfully,
Mark Murphy
Sr. Technical RecruiterFirst attempt failed download resume
Attachments:
John_Freeman1.doc 52 KB -
Labview Programmer needed for project work in Milwaukee Area or over the internet
We have a project I need to get done before summers end and we have majotiy of the code. My company builds robotic systems which we use for industrial inspections mainly in the petrochemical industry. These robotic systems work with a ultrasonic systems which we use to take thickness measurements of piping and pressure vessels using ultrasound. We have the ultrasound equipment and most of the software as said previously, we just need it polished up and some additions made. Here is a link from NI which is simular to what we do and you can even download the code and have a look at there code: http://zone.ni.com/devzone/cda/epd/p/id/3618 . Our code is a bit more complex but you get the picture.
This position is not a full time position as of yet. We are looking for someone to work with us on a contract basis for now. We need someone experienced with the following; Data aquisition, Data analysis, Experience with RF, USB comunication. We perfer to hire somebody local but if we cant we can can do this over the internet. If you are interested, give us a reply with contact info. Thanks.
Regards,
BillBill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim
Maybe you are looking for
-
'DYNP_VALUES_UPDATE'
Hello experts, i m developing one screen , in that i put one F4 help, there are two fields doc & doc Date. i want when user select that doc no. corresponding date will appear in date field.I m using FM 'DYNP_VALUES_UPDATE' to update. call function
-
RowValException on Applicaiton module commit
Hi Experts, I am have overwritten the Entity validation method as follows try { super.validateEntity(); } catch (Exception ex) { ex.printStackTrace(); and i got an exception when i commit the application module and the exception was - RowVa
-
How to read a mail from sap inbox thru abap code?
how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi. Message was edited by: shahid mohammed syed
-
New hard drive - how to import iTunes and Mail only from Time Machine backup
Hi I am installing a new boot drive into my MacPro. When I do this, I only want to copy over initially Mail and iTunes as previously backed up in Time Machine. Is there an simple way to do this without a complete copy of my last Lion install going
-
Urgent File receiver adapter fcc
hi all, <?xml version="1.0" encoding="UTF-8"?> <ns0:MT_ORDERS xmlns:ns0="urn:abb-com:kwe:purchaseorderdelivery:th"> <E2EDK01005> <SEGMENT>1</SEGMENT> <CURCY>1</CURCY> <BELNR/> <RECIPNT_NO>23</RECIPNT_NO> </E2EDK01005>