Looking for a labview virtual instrument program we can modify

Hi, I’m looking for a canned labview virtual instrument program we can modify for the OMB DAQ 55 from Omega to measure three temps and control three DO. I have the driver at:ftp://ftp.omega.com/public/DASGroup/products/OMB-DAQ5455&56/ The driver is labviewpdaq5xsetup.exe. I have the OMB DAQ 55 from http://www.omega.com/pptst/OMB-Daq55.html with a USB interface. I am trying to set it up to control a 24V electric valve. I’d like it to measure temperatures (5 separate temps), allow a set point to be programmed for three of them and turn on and off a DO based on the temperature. PID is not required yet. Maybe in the future… We have labview 7.1 and 8.0 but my colleague prefers 7.1 Do you have an labview VI programs that you can share that will do this with the DAQ 55? If you have something that will be close, we can modify it. But starting from scratch will likely mean we can not get this done in time for a project test. Simple set point and control is all I’m looking for… I’m new (my colleague knows it better than me, but has less time) to labview and do not have the resources to learn it from scratch to figure this out. Is there something you have I could modify? Can you help. Or are there canned programs you have that will do this? Labview is the preferred language. Thanks. Attached is what Omega shared with us, it might help…it’s a screen capture from a similar program, but far from the mark.

Hi vestel,
These discussion forums are more geared for questions - not necessarily having everyone else code for you.
You have a few options if you want code.
1) Look at the shipping examples that come with LabVIEW. This will give you a starting point from which to ask questions.
2) Look at the Instrument Driver Network that exits on National Instrument's Web site. Here are all the Omega instrument drivers listed.
3) Look at the list of Alliance members who you can pay to develop your code for you. Look here.
I hope this helps,
Kevin S.
Applications Engineer
National Instruments

Similar Messages

Looking for a Labview job. Any offers or suggestions?

Hi, everybody!
I wish we had labview.jobs or something. Since we have not yet,
I would appreciate any hints regarding looking for a Labview job,
especially for people with just 1 year of experience,
beside emailing everybody on the NI Alliance list and searching
general purpose job sites.
In case prospective employers read this, my cover letter and resume follow:
Dear Manager:
Thank you for taking time out of your busy schedule.
You will find that my resume which is attached,
outlines why I am an excellent fit for a
position with your company. In addition to my broad
educational background including two Masters degrees
in Electrical Engineering and Physics, numerous
Computer Science courses taken, and ten years of
diverse experience in programming and system
administration and support, I have just finished a
successful control and data acquisition project in
Labview which is also described in my resume.
My experience and background enable me
to master any software development tool and/or
environment very quickly, which makes me a perfect
candidate who can always keep up with the
ever-changing world of computer technologies.
I am looking forward to discussing this opportunity
with you.
Sincerely,
Stanislav Rumega
2000 Goldsworth Valley, Apt. #X-5
Kalamazoo, MI 49008
Telephone: (616) 387-5967
[email protected]
http://free.prohosting.com/~styrum/webresume.shtml
OBJECTIVE:
To obtain a full-time Software Engineer, Developer,
Programmer, or Analyst position after graduation from
Western Michigan University in April 2000. Willing to
consider positions that are usually offered to
candidates with BS degrees too.
SUMMARY:
- Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
HTML, SPARC Assembler;
- Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
- Software: LabVIEW, Maple V, FoxPro, MS Word,
MS Excel, CorelDraw , Internet Explorer, Netscape
Navigator, various utilities and other packages;
- Fluent in English and Russian.
EXPERIENCE:
Teaching/Research Assistant, 1997 - Present
Department of Physics, Western Michigan University,
Kalamazoo, MI
- Taught undergraduate physics labs;
- Graded student papers;
Project:
Developed a control and data acquisition program for
an electron spectrometer system in the WMU accelerator
laboratory. The program was written in LABVIEW.
The project involved controlling and retrieving
data from devices on a CAMAC crate as well as
GPIB (IEEE-488) instruments connected to the system
via a GPIB to CAMAC interface. A computer communicated
with the system via a serial (RS-232) port on the
crate controller.
Engineer/Programmer, 1993-1997
The Association FACTORIAL-SERVICE, Rostov-na-Donu,
Russia
- Supported all the available computer resources and
other equipment (a phone switching system, phones,
faxes, copiers, etc.);
- Selected, purchased, installed, configured all the
hardware and software used at the office;
- Installed and administered a LAN;
- Designed and coded applications;
- Fine-tuned complicated off-the-shelf Accounting and
Sales software which had their own built-in
languages and required programming;
- Trained users;
- Provided translations between English and Russian.
Engineer/Programmer, 1992-1993
Joint Stock Company TRANSINFORM, Moscow, Russia
- Provided some preparatory work and marketing for
the introduction of an X.25 packet-switched
computer network in Rostov-na-Donu, Russia.
Engineer/Programmer, 1991-1992
Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
Moscow, Russia
- Developed a FoxPro application to calculate traffic
accident rates depending on road conditions.
EDUCATION:
Candidate for Master of Arts in Physics,
1997 - Present Western Michigan University,
Kalamazoo, Michigan
Anticipated graduation date: 04/00.
Computer Science GPA: 3.8,
Overall GPA: 3.4 on a 4.0 scale.
Computer Science courses taken:
- Computer Science II (Object-Oriented C++
Programming);
- System Programming Concepts (UNIX, C);
- Computer Organization and Assembly Language
(SPARC);
- Principles of Database Management Systems (SQL,
PL/SQL);
- Data and File Structures (C++);
- Programming in Maple V;
- Programming Languages (Principles of Programming
Languages, Web Programming: HTML, Java).
Awards:
- Dean's List, 1998-1999;
- David Carley Memorial Award, 1998;
- Department Award for Graduate Student Teaching
Effectiveness,1999.
5-yr. Diploma in Radiophysics and Electronics,
an equivalent of an MS in Electrical Engineering,
1991 Rostov State University,
Rostov-na-Donu, Russia
Numerous courses in Mathematics, Physics, and Computer
Science taken.
GPA: 4.7 on a 5.0 scale.
Project: Developed a simulation of a conveyor
multiprocessor system. The program was written
in Pascal.
Awards:
- Received a higher stipend for high academic
achievements every semester, 1984-1987,
1989-1991.
ACTIVITIES:
- Graduate Student Advisory Committee, Member,
1999-2000;
- Association of Information Technology
Professionals, WMU Student Chapter, Member,
1999-2000.
- Volunteer Student Safety Patrol, 1989-1991.
WORK AUTHORIZATION:
Authorized to work in US for 12 months after
graduation, which can be extended for up to
6 years with employer's help through
petitioning for a working visa.
In Canada, an employment authorization (EA) must be
obtained before starting employment.
REFERENCES:
Available upon request.

Forgot to mention - go to any jobs web site and enter LabVIEW as a keyword - for
example, I went to http://www.monster.com/ and found 301 postings.
"John D. Seelbinder" wrote:
> Viewpoint Software Solutions is looking for a software engineer with LabView
> experience:
> http://www.viewpointusa.com/employment.html
>
> FWIW I do not work for, or have a financial interest in Viewpoint Software
> Solutions.
>
> Stanislav Rumega wrote:
>
> > Hi, everybody!
> >
> > I wish we had labview.jobs or something. Since we have not yet,
> > I would appreciate any hints regarding looking for a Labview job,
> > especially for people with just 1 year of experience,
> > beside emailing everybody on the NI Alliance list and searching
> > general purpose job sites.
> >
> > In case prospective employers read this, my cover letter and resume follow:
> >
> > Dear Manager:
> >
> > Thank you for taking time out of your busy schedule.
> > You will find that my resume which is attached,
> > outlines why I am an excellent fit for a
> > position with your company. In addition to my broad
> > educational background including two Masters degrees
> > in Electrical Engineering and Physics, numerous
> > Computer Science courses taken, and ten years of
> > diverse experience in programming and system
> > administration and support, I have just finished a
> > successful control and data acquisition project in
> > Labview which is also described in my resume.
> > My experience and background enable me
> > to master any software development tool and/or
> > environment very quickly, which makes me a perfect
> > candidate who can always keep up with the
> > ever-changing world of computer technologies.
> >
> > I am looking forward to discussing this opportunity
> > with you.
> >
> > Sincerely,
> >
> > Stanislav Rumega
> > 2000 Goldsworth Valley, Apt. #X-5
> > Kalamazoo, MI 49008
> > Telephone: (616) 387-5967
> > [email protected]
> > http://free.prohosting.com/~styrum/webresume.shtml
> >
> > OBJECTIVE:
> > To obtain a full-time Software Engineer, Developer,
> > Programmer, or Analyst position after graduation from
> > Western Michigan University in April 2000. Willing to
> > consider positions that are usually offered to
> > candidates with BS degrees too.
> >
> > SUMMARY:
> > - Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
> > HTML, SPARC Assembler;
> > - Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
> > - Software: LabVIEW, Maple V, FoxPro, MS Word,
> > MS Excel, CorelDraw , Internet Explorer, Netscape
> > Navigator, various utilities and other packages;
> > - Fluent in English and Russian.
> >
> > EXPERIENCE:
> >
> > Teaching/Research Assistant, 1997 - Present
> > Department of Physics, Western Michigan University,
> > Kalamazoo, MI
> > - Taught undergraduate physics labs;
> > - Graded student papers;
> >
> > Project:
> > Developed a control and data acquisition program for
> > an electron spectrometer system in the WMU accelerator
> > laboratory. The program was written in LABVIEW.
> > The project involved controlling and retrieving
> > data from devices on a CAMAC crate as well as
> > GPIB (IEEE-488) instruments connected to the system
> > via a GPIB to CAMAC interface. A computer communicated
> > with the system via a serial (RS-232) port on the
> > crate controller.
> >
> > Engineer/Programmer, 1993-1997
> > The Association FACTORIAL-SERVICE, Rostov-na-Donu,
> > Russia
> >
> > - Supported all the available computer resources and
> > other equipment (a phone switching system, phones,
> > faxes, copiers, etc.);
> > - Selected, purchased, installed, configured all the
> > hardware and software used at the office;
> > - Installed and administered a LAN;
> > - Designed and coded applications;
> > - Fine-tuned complicated off-the-shelf Accounting and
> > Sales software which had their own built-in
> > languages and required programming;
> > - Trained users;
> > - Provided translations between English and Russian.
> >
> > Engineer/Programmer, 1992-1993
> > Joint Stock Company TRANSINFORM, Moscow, Russia
> >
> > - Provided some preparatory work and marketing for
> > the introduction of an X.25 packet-switched
> > computer network in Rostov-na-Donu, Russia.
> >
> > Engineer/Programmer, 1991-1992
> > Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
> > Moscow, Russia
> >
> > - Developed a FoxPro application to calculate traffic
> > accident rates depending on road conditions.
> >
> > EDUCATION:
> >
> > Candidate for Master of Arts in Physics,
> > 1997 - Present Western Michigan University,
> > Kalamazoo, Michigan
> >
> > Anticipated graduation date: 04/00.
> > Computer Science GPA: 3.8,
> > Overall GPA: 3.4 on a 4.0 scale.
> >
> > Computer Science courses taken:
> > - Computer Science II (Object-Oriented C++
> > Programming);
> > - System Programming Concepts (UNIX, C);
> > - Computer Organization and Assembly Language
> > (SPARC);
> > - Principles of Database Management Systems (SQL,
> > PL/SQL);
> > - Data and File Structures (C++);
> > - Programming in Maple V;
> > - Programming Languages (Principles of Programming
> > Languages, Web Programming: HTML, Java).
> >
> > Awards:
> > - Dean's List, 1998-1999;
> > - David Carley Memorial Award, 1998;
> > - Department Award for Graduate Student Teaching
> > Effectiveness,1999.
> >
> > 5-yr. Diploma in Radiophysics and Electronics,
> > an equivalent of an MS in Electrical Engineering,
> > 1991 Rostov State University,
> > Rostov-na-Donu, Russia
> >
> > Numerous courses in Mathematics, Physics, and Computer
> > Science taken.
> > GPA: 4.7 on a 5.0 scale.
> >
> > Project: Developed a simulation of a conveyor
> > multiprocessor system. The program was written
> > in Pascal.
> >
> > Awards:
> > - Received a higher stipend for high academic
> > achievements every semester, 1984-1987,
> > 1989-1991.
> >
> > ACTIVITIES:
> > - Graduate Student Advisory Committee, Member,
> > 1999-2000;
> > - Association of Information Technology
> > Professionals, WMU Student Chapter, Member,
> > 1999-2000.
> > - Volunteer Student Safety Patrol, 1989-1991.
> >
> > WORK AUTHORIZATION:
> > Authorized to work in US for 12 months after
> > graduation, which can be extended for up to
> > 6 years with employer's help through
> > petitioning for a working visa.
> > In Canada, an employment authorization (EA) must be
> > obtained before starting employment.
> >
> > REFERENCES:
> > Available upon request.

Electromechanical Engineer Looking for Interesting LabView telecomute work.

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

Looking for a third-party affiliate program that will integrate well with Adobe Business Catalyst.

Dear Adobe Community,
I am looking for a third-party Affiliate Program that will integrate well with the Adobe Business Catalyst platform.
The requirement is fairly basic, i.e., to track multiple affiliates and down-stream affiliate-to-affiliate referrals. Also looking to report and display these referrals an affiliate’s dashboard.
We have looked into Affiliate Program Software, Affiliate Tracking Software Marketing and would like to entertain other options before making a decision.
Any assistance would be greatly appreciated! —Thank You!
Kind Regards,
Doug McClure

For what it is worth, I am a fan of NuGen, I have both SEQ 1 and 2 and two stereo enhancing tools (stereoizer and stereoplacer I think they're called). Since I have the SEQ 1 it replaces all Channel EQ's. And the stereotools sound great and very lush, in stead of the more usual cheezy combfilterthingies that pass for stereo enhancing tools.
And I actually like the interfaces. Simple, but stylish, functional and ergonomic (in this case meaning you can see all parameters in a quick glance, no guessing at settings).

Small Company looking for a LabVIEW consultant (remote consultant welcome)

Hello,
We are a small company looking for a LabVIEW consultant. This is about a 3-6 month project. The consultant must be familiar with NI hardware product as well. Please send me your resume/CV. In your email please state the following: years of experience, educational background, your hourly requirements, your location, and the amount of time you will be able to provide.
Please removes spaces on the email below.
int e g r at e d devi c e s @ yah oo. c o m

I'm not sure if this is frequent on the NI forums, since I believe NI validates user information prior to issuing an account that allows them to post to the forum. But usernames (like mine) don't provide immediate identifications; you have to ask for it.
Apparently Job Scams have become more frequent. See the list of tips on the following site, (I have no relationship with this site. It just came up in a google search).
http://www.identityhawk.com/IdentityProtectionTips-inHonorof-LaborDay
5 Steps to Take Before Applying for a Job
1. Email - the company to get information about the job. Do not provide any personal information to them upfront.
2. Phone - speak to an official at the company and ask about the job. Be assured that it is legitimate.
3. Meet - at the company site to assure it is a real company. If you cannot meet, and the company is in your town, drive by to see the facility, (possibly using google maps to view the site).
4. Verify - see if you can find a person who has worked at the company or call a Chamber of Commerce of Better Business Bureau to assure the legitimacy of the company. Search online for legitimate information about the company, search online for any complaints of non-legitimacy. State Entity sites typically have the name of the company and how long they have been in business.
5. Apply - once you are assured the company is legitimate, it is safe to apply; but you should still not supply highly personal information like bank accounts until you are officially hired.

Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it

Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.

Without proper system information and the application logs nobody can tell you much.
Troubleshoot Creative Cloud download and install issues
Mylenium

Looking for a free iOS 4 app that can search through .pdf files or spreadsheets

Looking for a free iOS 4 app that can search through .pdf files or spreadsheet
Thanks

Hey there
"pdf creator" for iPad works flawlessly for me working with pdf files
It takes care of all my needs
I'm not sure about sending via Wifi or Bluetooth but I send them via e- mail all the time
Possibly it could handle your needs as well
Just type it into the App Store search field and the first one that comes up is the one I use
Jump on over there and read up on it before buying and see if it will help you
Hope this helps
Regards

I am looking for a real time CRM consultant who can teach me in Bangalore ?

I am looking for a real time CRM consultant who can teach me in Bangalore ?
Call me on 7204246238

If you are looking for a Creative player only The Zen V and Zen V plus are good options. I think they will satisfy most of your requirements.
Strike that, I don't think this will act as an "external hard dri've" as described in bMessage Edited by fdreinthea on 2-2-200605:37 AM

Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

Extension cables for Thunderbolt don't yet exist, but Apple has recently released a Thunderbolt cable that is 2M or 6.5 feet long. I just connected my 27" Thunderbolt display to my iMac, which sit about 4-feet apart from each other, and it works perfectly. You just don't use the Thunderbolt connection cable that is attached to the display - plug the display's power cable in, and use the 6.5-foot Thunderbolt cable to connect the display to the computer.

Call LabVIEW Virtual Instrument through ActiveX Server from C/C++

I am trying to access a VI by C/C++ almost identical to the reference example that can be found on this site for Visual Basic. However, somehow, I am unable to succeed to use the ActiveX Call() function. The program always crashes, whatever I try. Because the Visual Basic version works without any problems, I hope someone can point me the error in the code.
Thanks!
#include "stdafx.h"
#import "LabVIEW.tlb"
#define VIPATH "D:\\Program Files\\National Instruments\\LabVIEW 7.0\\examples\\apps\\freqresp.llb\\Frequency Response.vi"
using namespace LabVIEW;
int _tmain(int argc, _TCHAR* argv[])
// Initialization
HRESULT he = NULL;
he = CoInitialize(NULL);
// Create instance of
labview application engine
_ApplicationPtr pLV;
he = pLV.CreateInstance("LabVIEW.Application");
// Create instance of virtual instrument
VirtualInstrumentPtr pVI;
he = pVI.CreateInstance("LabVIEW.VirtualInstrument"); /* ?not? mandatory */
// Get reference to a VI at location VIPATH
_bstr_t viPath(VIPATH);
_bstr_t password("");
VARIANT_BOOL resvForCall = FALSE;
long options = 0;
pVI = pLV->GetVIReference(viPath,password,resvForCall,options);
// Show front panel
pVI->FPWinOpen = TRUE;
// Call the referenced VI as subVI
_variant_t paramNames[5] = {"Amplitude", "Number of Steps", "Low Frequency", "High Frequency", "Response Graph"};
_variant_t paramVals[5] = {}; /* VT_EMPTY */
/* Fill ParamVals with values from VI */
for (int i = 0; i < 5; ++i) paramVals[i] = pVI->GetControlValue(paramNames[i].bstrVal);
/* Call VI -> !!! CRASH !!! :-( */
pVI->Call(paramNames,paramVals);
// Release references and close application
pLV->AutomaticC
lose = TRUE;
pVI.Release();
pLV.Release();
CoUninitialize();
return 0;

This may not be the easiest way. Although i have not used _variant_t. But it seems like your VARIANT type is VT_EMPTY for everything. You need to build up an array of variants with correct type, that matches the type of control you are assigning data to like VT_INT for int numeric, VT_BSTR for string control etc
VARIANT paramNamesVarArg, paramValuesVarArg;
SAFEARRAY *paramNames, *paramValues;
::VariantInit(&paramNamesVarArg);
paramNamesVarArg.vt = VT_ARRAY | VT_BYREF | VT_BSTR;
// create safearray of strings
SAFEARRAYBOUND rgsabound[1];
rgsabound[0].lLbound = 0;
rgsabound[0].cElements = 1;
paramNames = SafeArrayCreate(VT_BSTR, 1, rgsabound);
paramNamesVarArg.pparray = &paramNames;
long index = 0;
_bstr_t paramName = "Numeric";
BSTR *bstrVal;
retVal = SafeArrayPtrOfIndex(paramNames, &index, (void **)&bstrVal);
*bstrVal = paramName.copy();
//do the same method for paramValuesVarArg
::VariantInit(&paramValuesVarArg);
paramValuesVarArg.vt = VT_ARRAY | VT_BYREF | VT_I4;
rgsabound[0].lLbound = 0;
rgsabound[0].cElements = 1;
paramValues = SafeArrayCreate(VT_VARIANT, 1, rgsabound);
paramValuesVarArg.pparray = &paramValues;
VARIANT *dispVarVal;
VARIANT tempVar;
tempVar.vt = VT_I4;
retVal = SafeArrayPtrOfIndex(paramValues, &index, (void **)&dispVarVal);
*dispVarVal = tempVar;
viPtr->Call(&paramNamesVarArg, &paramValuesVarArg);
Hope it helps.
A Rafiq

Looking for intern (Labview)

Hello!
I'm looking for a company somewhere in Europe that is offering an internship or a job. I have a Msc in Electrical Engineering (Automatics-Robotics), CLAD, and i'm looking for a work with Labview. I will be very thankful for any information...

Hi
Perhaps we can also help with your LabVIEW recruitment.
Austin Resources is a division of Austin Consultants who are one of the UK's premier NI LabVIEW consultancies, they are an NI silver alliance partner and employ amongst others three NI Certified LabVIEW architects.
Austin Resources has been set up to provide the Alliance network together with other companies and research organisations with qualified and well matched permanent and contract LabVIEW engineers. Austin Resources works closely with Austin Consultants to ensure all candidates and expertly screened and highly suitable for any proposed role. Our administration and candidate systems are tailored to match key National Instruments skills and qualifications as well as other key industry experience.
Austin Resources has been endorsed by NI's UK senior management team and we believe it is the UK's only dedicated specialist National Instruments LabVIEW recruitment agency manned by dedicated NI knowledgable staff.
Austin Resources has an extensive candidate base of experienced and qualified LabVIEW developers and Architects seeking immediate employment.
I am confident I have quality candidates waiting and thus await your approval to be able to submit details.
Provide me with the relevent contact information and I will call to discuss.
Regards
Ivor
Ivor

Looking for a graphical text popup program

I'm looking for a really specific type of program, and I don't really know where to start since I don't really know of a simple way to describe it and put into a search engine...
I want a program that will display a graphical popup on the screen with large text - something where I can type:
popup "test"
in the command line and a window or overlay will pop up showing "test" with a large font. The only thing I've seen that does this is Quicksilver for OS X: <http://www.oakinnovations.co.uk/blog/wp … arning.png>.
For clarification: I don't mean a fully automated desktop notification program, but if one of them can provide this feature, that would work.

skanky wrote:Also dunst and cat_osx I think it's called. I'll check it's package etc when I'm at my computer.
Right, it's called osd_cat, and it's available through xosd.
An image search will throw up a few screenshots.

I'm looking for the best IDE to program in C#

I am an entry level programmer and I am looking for the best IDE to practice programming in C#. What are the best and easier IDEs to work with that work on a MacBook?
Also, any suggestions on sites, books, etc that could help me learn the language better?

"If you plan on writing apps for Windows, get a Windows-based computer."
A MacBook Pro running ML is the best lapstop computer for running Windows according to
this: http://www.eweek.com/apple/apple-makes-the-best-windows-laptop-soluto/
The OP already has the best hardware for developing Windows applications.

Looking for someone to make a program for my mobile phone

OK, I am looking for a programmer, who could make me a program for my mobile.
I have a sony ericsson w300i
The program needs to, when opened, change all bluetooth devices on the list, to always allow connections. So all the devices on that list are set to always allow and not always ask.
If this is not possible to do, please tell me, or if you could make this program for me, tell me too.
The program must be fast and silent. I need it to just work when opened, without a message coming up or anything, this will allow me to quickly and easily proceed with my business
The reason I need this program, is because I have I REALLY long list of devices, and it really does take a long time to change the settings to allow connection on all of them. (I need to allow connections for the specific programs I test and use, on my PC)
You can access the list (on sony ericsson) by going to: menu -> settings -> connectivity -> bluetooth -> my devices.
I might be willing to pay, if the program works well!

{color:#000080}@DrClap
j2me can't mess around with the security that is built into the bluetooth protocol.
@OP
Bluetooth pairing cannot be overridden nor done programmatically. Ability to connect to another device would always depend on the owner of that device having maintained the BT address of your device in the list of known devices.
Bluetooth connection can be done through a program, but there is nothing to be gained from that unless the program needs the BT connection to transfer data between devices, as the connection is in use as long as the program holds on to it, and disconnected when the program exits (if not before).
db{color}

Looking for Java Based Graphics & Animation Program

I'm having a bit of trouble finding a Java based program for graphics such as in games, pictures, etc. I already have Sun Java Studio Creator 2 which seems to be all about website graphics, and not what I'm looking for. Can anyone help me out?
Edited by: Daniel517 on Nov 18, 2007 11:59 AM

search for Multimedia, Java2D, Java3D, JAI topics
http://forum.java.sun.com/category.jspa?categoryID=9
http://forum.java.sun.com/forum.jspa?forumID=406
http://jalbum.net/
Edited by: RyanRM on Nov 18, 2007 8:16 PM

Looking for a labview virtual instrument program we can modify

Similar Messages

Maybe you are looking for