Looking for a nice solution for different cases with nearly same operations

Hi everybody:
I'm looking for a nice solution for the following problem:
I'm measuring different data at the same time (with different devices).
I would like to save these data all in one array (or cluster?), but I
don't know exactly the way to do this. All values have corresponding
time values. So for one data type it would result in a 2d array,
wouldn't it? But how can I save different data types with their time
values in one array? Or should I take a cluster? And how can I get only
a certain type of data out of this array or cluster again? E.g. if I
only need data type "3" with its time stamps for evaluation? I would
really appreciate an example, I work with LV 7. Thanks!
Then - for evaluation - I only need one data type of these different
data. Which one I would like to choose via the frontpanel (it changes
from test to test). So, I thought of a case structure (where I can
choose which data type and correspondingly which evaluation way). The
evaluation steps for the different data types are quite the same, but
can vary in order of execution. I could write for every case the
(nearly) same evaluation steps, but this would take a lot of time, plus
if I need to change one step I need to change it in every case.
Does anybody know a better way?
Thank you very much in advance,
Steffi

steffi.kono wrote:
In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
steffi.kono wrote:
And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Where can I buy an ipad2 case with the same design as the case for the original ipad?

    I thought the case for the original ipad was great, but it doesn't quite fit the ipad2.  Is there somewhere I can find a case with that same design, but fitted for the ipad2?

    www.amazon.com
    Search for "iPad 2 Case"

  • Hi Everyone,  I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

    Hi Everyone,  I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

    I have friends all over Europe, does it matter what number they use to call me? Nope! All incoming calls are free for me.
    The only time you ever have to worry about which number is if you get charged for incoming domestic/international calls.
    You can tag their number (work/home/iphone) and that may show on the CallerID accordingly.
    It should show, John Doe
    underneath,    work/home/mobile
    For example:
    http://shawnblanc.net/images/img-0009-1.png

  • I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    Just create a new AppleID for your work.
    As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
    However, you can put items purchased on on account onto the other iPhone.

  • Publish two publications from different customers with the same Adobe DPS ID

    Hello:
    I have a publication made on InDesign and I have uploaded it to the Adobe Server with my Adobe DPS account. For the first publication, I published the publication with the Folio Producer on the digitalpublishing portal, and then I created the app using the Adobe Viewer Builder. Then, I tried it locally on my iPad. It was working fine and I could see my publication.
    Now, I do need to upload a new publication for a different customer with the same Adobe DPS account and I need to create a different app with the new customer look and feel but I don't want to show the first publication in this new app, only the last one.
    In a nushell, I need to keep separated two publications (or more) when they are published if I'm using the same DPS Account... Is that possible?
    Saludos Cordiales,

    Hi Leo,
    Every title should have its own publication AdobeID (a title can contain multiple editions / folios).
    So you have to request for every title you want to work on a provisioned account with Adobe. Make sure that you have setup the corresponding emailaddress / emailalias. For example [email protected] and [email protected]
    After the accounts have been provisioned you can:
    * upload and organize multiple folios for that publication in the corresponding Folio Producer
    * Create a viewer with your Viewer Builder and on the first page supply the AdobeID for the give publication
    You can request new publication accounts any time and these are included with your DPS subscription.
    When you first account got provisioned, you should have received an excel document to request provisioning for the various publications. In this document you can list the accounts you want to use for publications, individual users of the system and viewer builder access.
    With kind regards,
    Klaasjan Tukker
    Adobe Systems Benelux

  • My Ipod classic has started to play mono only through the headphones. I have tried different headphones with the same outcome. Is the device repairable or better to upgrade?

    My Ipod classic has started to play mono only through the headphones. I have tried different headphones with the same outcome. Is the device repairable or better to upgrade?

    Hey Grimeymouse, 
    Thank you for contributing to the Apple Support Communities. 
    It sounds like your iPod classic is only playing sound in mono when using multiple headphones. 
    Since you've likely isolated this behavior to the iPod by trying multiple headphones, see this advice from the "The headphones don't work" section of the iPod troubleshooting basics and service FAQ: 
    If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
    All the best,
    Jeremy 

  • My iPhone is merging different contacts with the same firstname into one contact. How can i resolve this.

    My Bosses iPhone is merging different contacts with the same firstname into one contact. How can i resolve this? He seems very disturbed and thinks i don't know what i'm doing. I've set up all his devices to sync across and now its messed up on his iPad, and two iPhones.
    E.G Contacts with firstname 'Adams' and different numbers are synced into one account.
    Now i have no clue how many contacts are this way cos he has a huge number of contacts (he's the ceo).
    Please i need a suggestion on how to fix this.
    Thanks for the help.

    Janie Mac wrote:
    Cannot find settings to then go to general then about.
    How do I edit the device in iTunes?
    Double-click on the name.
    My screen shot shows both devices because I sync wirelessly.  Right now I can change the iPod name but not the iPad name because the iPod is idle while the iPad is syncing.  In another minute or two, I'll be able to change the iPad name.

  • How to force OSX to connect to a specific Access Point i.e. manually choosing beetween different APs with the same SSID?

    My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
    But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
    (I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
    Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
    Any idea how to force Mac to join a specific AP?
    Thanks,
    adso

    My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
    But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
    (I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
    Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
    Any idea how to force Mac to join a specific AP?
    Thanks,
    adso

  • Looking for a clone solution for Oracle WebCenter Content, Imaging and related products

    Hi,
    We are looking for a manual or automated cloning solution for Oracle WebCenter Content (UCM), Imaging (ICM) and related products. Oracle FMW has T2P cloning option, but we are looking for more specific to just this product to clone and configure (if needed). Any help is appreciated.
    Best Regards

    Hi
    Assuming you have set up Purchasing with accrual method on receipt (and not on period end), you could enter the PO lines with receipt required. The receipt transactions you are uploading will generate the accounting to charge the expense accounts / or inventory valuation account.
    There is no need to interface those also to Payables. In AP enter one invoice with the real monthly amount and match it to the purchase order level or to the receipts level. Approve and pay that invoice.
    Dina

  • Looking for some Nice Pictures for Wallpaper

    Hi I'm looking for a nice web-page to find some real nice Pictures for my iPhone can anyone be of any help? Thanks
    Lisa

    I have found some really nice wallpaper from.....
    http://www.sciphone.net/index.php
    http://www.thememyphone.com/

  • How to copy a files spotlight comments for an entire folder and place them in a different file with that same name

    I have the same question in a different discussion but I already marked it as solved because one of the questions was answered. Here's the linke to the other discussion if your interested https://discussions.apple.com/thread/5970421 
    I have movie covers saved as a jpeg for every movie my family and I own. There is about 700 and they each have a comment of the main actors, release dates, and descriptions. This makes it easy to find what to watch.Is there an applescript, automator, program I can download,  or program code supported in xcode that will do the following set of inscructions?
    Take the name of the picture file and spotlight comment, copy and paste it to a movie file's comments to a file with the same name but obviously has different extention. For an example
    In a Pictures folder
    Name: Dark Knight, The.jpeg       Comment: (2008) Genre: Action...             <- copy comment
    In a Movie Folder
    Name: Dark Knight, The.m4v       Comment:                                               <- paste
    and do this for all 700 files

    Clendenen02 wrote:
    where should I run the code? in the terminal, or an applescript, or should put it in xcode and run it from there or the terminal.
    What MrHoffman said.
    But if it's easier, you can wrap it in Automator and have Automator ask for the Folders: (Test on a sample of your files before running on all 700 files)
    (do you really own 700 movies??)
    The Workflow is:
    Put this in the Run Shell Script Action (and pass input as arguments":
    PicDir=$1
    MovDir=$2
    for f in $PicDir/*
    do
         if [ ! -d "$f" -a "${f##*.}" = "jpeg" ]; then
              comment=$(mdls -raw -name kMDItemFinderComment "$f")
              if [[ $comment != "(null)" ]]; then
                   picname=${f##*/}
                   movname=${picname%.*}.m4v
                   if [[ -e "$MovDir"/$movname ]]; then
    osascript <<-EOF
    tell application "Finder"
    set comment of file (POSIX file "$MovDir/$movname") to  "$comment"
    end tell
    EOF
                   fi
              fi
         fi
    done
    (BTW, I know that this is a bit of sloppy scripting (wraping an osascript in a Bash Script wrapped in Automator, but it does what you need)

  • Is there a way for people to sign into a forum with the same email they used elsewhere on the site?

    Right now, our site has to have a separate login for the forum that was built using the forum module. This poses a problem since users who sign up through other web forms that do not have username or password fields may try to sign in to the forum and then try to reset a password that does not exist. It also poses a problem in that people who are already in the CRM because they signed up using other web forms cannot use the same email address they used to sign up to register for the forum.
    We have also had the same problem with secure zones in that people who have already gone through a web form and have their name and email address in the CRM have issues signing in to the secure zone.
    So, I'm wondering if there is any way to fix this so that people can sign up using the same email address.
    Thank you for your assistance!

    lost mode don't depend of the sim card. If you take your Iphone on Lost mode... anybody can use it with the original card sim or with an other one.
    Did you try to localise it ?
    But hope that thief don't make a restore of the Iphone... Call your Mobile Operator to try to block the IMEI Number.

  • WPC: unable to add different resources with the same name into a WPC page

    Hi,
    I got a WPC problem when adding different KM resources with the same name into a WPC page.  Only one KM resource is able to be added in WPC.
    For example:
    There two "article.html" with different content and RID:
    1. /company_a/article.html
    2. /company_b/article.html
    when adding these two html pages into a WPC page, only one page will be shown.
    This means that a WPC page is not able to contain resources with same file names.  I think the problem might lie on the resource-linking mechanism of WPC. WPC will add a resource link in the page folder, when a new resource is drag&dropped into WPC.
    Anyone has some good ideas to solve my problem? Thanks a lot.
    Regards
    Lei NING
    Edited by: Lei NING on Apr 15, 2008 4:16 PM

    As this is not possible and double entries cause this problem, why not just pu both napes in the contact details on the same number. IE John Smith & Peter Jones all in the first name, by doing this if you search your contacts either by searching for john, peter, smith or jones the number will show up and if either calls the number will show John Smith & Peter Jones, it may not be perfect but will work. As the phone only recognises a number if two seperate entries of the number exist with different names it cannot possibly know who is calling ?
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Drawing images gives 2 different results with the same code.

    Im adding my code on here, and its sort of long but ill try to explain it. Most of it you can ignore.
    Anyway i'm making a tree menu with only 1 level of expansion. So you have a TreeMenu object, and this object has some Branch classes. These Branch classes have Leaf classes. That is all. On the menu there is also a little box where you can click to expand and collapse each branch. if a branch is expanded, all of its leaves are shown. if it is collapsed only the branch name is shown.
    So far what I've described above works, there is a small scale compilable working program, that is alright. Theres just a few bugs to fix.
    A little feature of the tree is if a branch or a leaf is selected (has been clicked on in the past) it has a blue background. This sort of works. The branch names seem to work alright, and some of the leaves. However other if you run the example i provided you can click on Leaf 1, and it will be ok, but if you click on Leaf 2 then there blue background is twice as big as it should be. But for the rest, it works ok.
    This is weird to me because the same code handles any of these same situations. So it seems that i get 2 diferent results with the same code. If anyone would like to help heres some stuff you should know:
    You can ignore Leaf class, i dont think theres any errors in there.
    You can ignore just about all of Branch class except the update() method.
    You can ignore all of TreeMenu class except the inner MouseListener class might be useful.
    You can ignore TreeTester. Just the JFrame tester class.
    to run the code:
    javac TreeMenu.java
    java TreeMenu
    http://cs.ucsb.edu/~jsterling/treemenu.zip
    thanks.

    You make a good point Stefan but unfortunately I already checked that.  I have even copied the mapping (right click copy) and pasted it from the working Mapping to the bad Map (Paste) to make sure the context values were all the same.
    I also opened all the queues and compared the values in each.  All values match exactly except for the result(out) queue.
    In both tests I am using the same IDOC XML file. 
    These are the only differences I see.
    1.  The IDOC is exactly the same as far as I can tell but they come from two different source SWCV.  SAP APPL 4.7 and Steelcase_Procurement (ECC 6.0). 
    2.  The working map uses a local UDF.  The bad map calls the UDF from a Function Group.  Is there a Java version difference between the two?
    A better sample of the result queues look like this:
    Correct Result:
    Thickness of Glass: 20
    Height: 10
    Width: 5
    Length: 18
    Thickness of Glass: 10
    Height: 15
    Width: 8
    Length: 14
    Bad Result:
    Thickness of Glass: 20
    <null>
    <null>
    <null>
    Width: 5
    <null>
    <null>
    <null>
    I took this chance to redesign my Variant Config output to separate the characteristics/values, but I'm still bothered that I was unable to determine what would cause the differing values.
    Any ideas?
    Thanks,
    Matt

  • Itunes match with two different libraries on two different computers with the same apple ID? How?

    I have a work PC that I synch with my itunes library and it works totally fine. I also have a macbook at home with a different library on it. Both compuers share the same apple id. will itunes match synch all the devices with the same library? If so do I only need one itunes match purchase or do I need one for each computer? The apple help desk (phone support) and apple store I recently visited were unable to provide me with answers to my questions.

    Just create a new account. On one iPod go to Settings>iTunes and App stores and sing out and sign in with other account. Same for Settings>iCloud and Settings Messages. Also go to Settings>Face time and add the new iD email addrss as the Caling email address and delete the other one.
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Maybe you are looking for