Looking for a particular extension cable to connect an iPod to Roadtrip

Wondering if this exists...
I've been using a Griffin Roadtrip for months, but I no longer want my iPod mounted on it as I drive. First off, it just rattles too much (I'm nervous about damaging the bottom pieces inside). But most importantly, I've found that I keep removing the iPod from the mount too often as I skip through or search for songs.
I was wondering if anyone knew of an extension cord that connects between the Roadtrip's "dock" and to the iPod itself, allowing me to lay the player on the passenger seat next to me. I guess both ends of the cord would have to end in a "dock" piece.
I realize that I can just buy a new car kit that will allow this (such as DLO's TransDock Micro), but I did spend a hefty sum for the Roadtrip gadget and don't want to abandon it altogether.
Dell Inspiron   Windows XP   5G 60gb iPod, 4G 40gb iPod, 4gb iPod Nano

No and No. Sell your original iPad and buy the iPad 2 if you want to do Facetime.
It may be a hassle to you to sync them to the computer, but if your iPod and iPad were both stolen while you were out and about you will be glad the music, pictures, etc. are on your computer. And I hope you are regularly backing up your computer.
You can go here to tell Apple you would like these items: http://www.apple.com/feedback/ipad.html

Similar Messages

  • Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

    Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

    Extension cables for Thunderbolt don't yet exist, but Apple has recently released a Thunderbolt cable that is 2M or 6.5 feet long.  I just connected my 27" Thunderbolt display to my iMac, which sit about 4-feet apart from each other, and it works perfectly.  You just don't use the Thunderbolt connection cable that is attached to the display - plug the display's power cable in, and use the 6.5-foot Thunderbolt cable to connect the display to the computer. 

  • Looking for a particular vlaue in a id array

    i have a program which generates me 1000000 sample values ie a array of 1 million values.in this 0ne million values i need to look for a particular range of values ie allthe values in the array are 4 and then they ia a value like say 10 and some more values. i need to detect the values greeater than four and then take the 20 values from the index where it is detected. i may have hundered of this pattern in the million samples.

    I am attaching a VI which does what you want. The diagram is pretty straight-forward. Let me know if you don't understand anything.
    Regards,
    Khalid
    Attachments:
    chkarray.vi ‏34 KB

  • Looking for a particular email

    I have Mail backed up to TM as well as an external drive. I am looking for a particular email that has been backed up. I moved the particular mailbox from each of these drives to my desktop. They are .imapmbox files and would like to import these messages into Mail as a separate disposable folder.
    On the desktop they are #.emix files which are not easy to search.
    How to do this?
    Thanks

    I'm not sure. I know you can import mail stored locally by opening Mail and selecting Import from the File menu. Select the Apple Mail option then follow directions. A file Open dialog will appear and you must navigate to the /Users/username/Library/Mail/ folder and select the Mailboxes folder. If your mail is there then you can select the mailbox and import it. However, this does not work for IMAP accounts. Make a copy of the .mbox file that should have your mail. Again select Import from Mail's File menu. Select the bottom option to import .mbox mail and follow directions.
    Imported mail will appear in a separate sidebar header called Imported Mail.

  • Scan\Look for a particular character in a file

    I would like to look for a particular character(@) in a file. The character might be in a word. When if find the character I want to read the actual whole word that contains that character.
    What's the best way of going abt this?
    Thx,
    Kapapra.

    Read the file line by line using BufferedReader.
    Tokenize each line on space.
    Loop through the token strings.
    For each token that contains the character that you are looking for (e.g. @) found using indexOf operator of the String class, print or save (or whatever you want to do with that token) that token.
    Continue reading the file line by line till the end of the file.
    Does this make sense? Look the java.io package API for the details on how to read the file and stuff.
    If anyone has more effecient method to do this, please share.

  • Looking for a 3 meter cable for iPad air

    I'm looking for a 3 meter cable for an ipad air.

    the longest Apple makes is 2M, but Griffin Technology sells a 3M lightning USB cable they claim is iPad Air compatible.
    http://store.griffintechnology.com/usb-to-lightning-connector-cables-3-meter-gc3 6633

  • Quick Look for files without extensions.

    I have many files without extensions that quick look does not recognize as text files. Bash shell scripts generally do not use an extension, for example (they are identified by their first line). Similarly I have a lot of text file notes w/o a ".txt" extensions.
    Is there any way to have quick look recognize these as text files? They currently have either text edit or textmate as their default "open with" app. I presume there is a config file of some sort for quick look that will let me default files with no extension to text files, but have not found it yet.

    Can't Quick Look for some text files
    Re: Is it possible to change the viewing format?
    Quick Look for files without extensions.
    Re: Can I view text files without a .txt extension in Quick Look?
    How do I add support to Quick Look

  • Looking for a stopwatch app that can run on iPod Touch 2nd Gen (using ios 4.2.1), do any exist?

    Looking for a stopwatch app that can run on iPod Touch 2nd Gen (using ios 4.2.1), do any exist?

    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • TS1409 What if I don't have the Apple Component AV Cable or Apple Composite AV Cable to connect my iPod to? Do I have to buy one to watch videos on my iPod?

    What if I don't have the Apple Component AV Cable or Apple Composite AV Cable to connect my iPod to? Do I have to buy one to watch videos on my iPod?

    Hi there,
    I am assuming you have an ipod nano 6th gen (the small one with a touch screen)
    unfortunately, the ipod nano 6 gen can not play videos whatsoever unless you hack it so even with a cable it does not work.
    I hope this helps cus im new
    (if other generation ipod nano, just reply and i will help again )

  • Can I get a cable to connect my iPod to my iPad instead of to my laptop?

    Can I get a cable to connect my iPod to my iPad instead of to my laptop?

    No.  Your iPod Shuffle can only be connected to and synced with iTunes on your PC or Mac.
    B-rock

  • For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found).  What gives?

    For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found).  What gives?

    Sounds like the file yo are trying to sync to the iPod is corrupted.
    Try syncing only one item that plays in iTunes on the computer.
    Also see the following since when you downgrade iTunes you have to reset your iTunes library since the older version can't read the updated version of the library.

  • Looking for appropriate TV-Out cable

    Hey guys... I lost my tv-out cables in a recent move.  Looked all over for them, but they're gone.  The card that these fit is an XFX 7900GT.
    I really have two options.  The first, preferred option is to get a new 7-pin tv-out cable.  I have found one that would be perfect.  Unfortunately, it ships out of England.  (http://www.scan.co.uk/Products/ProductI … arProducts)
    I can't find this particular piece on any other website whatsoever.  I've been looking for something similar (Obviously, I don't want to spend a lot of money having this thing shipped only to not have it work), but so far have had little luck.
    The other option is to use a DVI-D converter, but most only go to HDTV component.  Unfortunately, I don't have an HDTV.
    However, I do plan on buying an HDTV at some point in the future, and would like the cable to support both RCA and Component (as the cord above does).
    Has anyone seen anything such as this anywhere available from a US retailer or e-tailer?  Any help would be greatly appreciated.

    Try setting tv out as the default accessory and then try it out.
    As far as I know Nokia has only one tv-out cable and that's the ca-75u which should be the same one you're referring to. Push the cable in firmly and make sure it goes all the way in. I have two cables and with one of them i have to take the cover off my phone for it to go all the way and work
    Show your appreciation. Hit that kudos button real hard

  • Looking for black, extra long cable.

    Any recommendations on an extra long black charging/sync cable for iPads? Found one but it does not actually charge. Desperately looking for a source to buy in quantity. Any recommendations welcome.

    If you're only looking for a longer charging cord, have you considered just buying an extenstion cord? Obviously, that won't work if you're connecting it to a computer but should do fine if you're using the power adapter.

  • Looking for pin outs on cable 198141A-2R​5

    Looking for the pin to pin connections for the 198141A-2R5, which is the connection between the UMI7772 and stepper motor drive.
    tks,
     terry

    Martnlindhe,
    I chose to purchase a MacMini Intel model to hookup to my 36 inch Sony TV.
    I chose this model for several reasons as I also have a Web Camera hooked up to it at the same time via Firewire. I use Front Row and iTunes to distribute music throughout the house wirelessly to other stereos and to view what is playing now via the TV.
    Here are some photos of the MacMini hooked up to the TV and using Front Row.
    http://users.sisqtel.net/jkriz/MacMini/OSX.jpg
    http://users.sisqtel.net/jkriz/MacMini/FrontRow.jpg
    http://users.sisqtel.net/jkriz/MacMini/frontrow_albumcovers.jpg
    The photos aren't that great but you get the idea. The TV screen looks great in person as opposed to the photos with the glare and the darkness.
    Some TV's don't look as good as my TV looks from what I have heard so your TV may or may not look as good. I am about to upgrade to a 42 inch Panasonic HD Plasma TV which should give an even better picture. At this time, my TV is connected to the MacMini via the "S-Video" cable. The HDMI video cable is a better choice if your TV has that capability.
    The new iTV from Apple is rumored to be released sometime this coming Spring.

  • How to look for a particular phrase in a document???

    Hey guys, I'm a little new at this thing... I need to figure out a way to make Java search through a document looking for instances of particular phrases, and replacing them with something else. For example, have it look for "A B C" and replace each such combination of words with "D E F". The search/replace needs to look for a few different phrases at once.

    String.replaceAll is a fine answer, but you are creating Strings left, right & center, tis best to use a StringBuilder/Buffer.
        private static void replaceAll( StringBuilder sb, String search, String replace ) {
         int index = sb.indexOf( search, 0 );
         while( index >= 0 ) {
             sb.replace( index, index+search.length(), replace );
             index = sb.indexOf( search, index );
        }

Maybe you are looking for

  • Unable to use certain sites after upgrading to iOS 8.0.2

    After upgrading (unintentionally) to iOS 8.0.2 I can no longer use certain sites that I regularly used previous to the upgrade.  The bookmarked signon page comes up and is pre-populated with my userid and password.  However the ipad does not respond

  • Java error on 10.6.8

    Hi I am recently having problems with java on my Macbook, using OS X 10.6.8 it keep saying error or failure, tried firefox, safari and chrome non of them working. I cannot get to my bank account can anybody help? (Cannot upgrade to Mavericks anymore

  • Data is overwritting in database

    Dear friends I am saving data in database table through screen.but problem is that it should allow duplicate entry without overwriting,   wa_ordtyp-txt = T003p-AUART.       WA_ORDTYP-AUART = T003P-AUART.       WA_ORDTYP-ZRD_FIELD = ZRD_FIELD.       W

  • Displaying 2 pages on the printpreview(smart forms)

    I would like to see 2 pages (if the size exceeds the main window) on the output screen by clicking on printpreview button. What I have to do for this to acieve? Please let me the detail procedure. Thanking you very much.

  • Adding an attachment to expenses

    Hi all- We are implementing Travel and Expense in ECC 6.0 / EP 7 and have a requirement to attach a scanned image of an expense receipt to the expense report, which will land as an attachment in the ECC system when the expense report is approved thro