Looking for a report to get all managed system components

Hi,
We are looking for a report to get the support pack level of managed system.
We can get that by going individually on each system entry in SMSY. Is there a standard report or a transaction in solution managed that can list the support pack level of all managed systems ?
Thansk you for your help.
Chak

Hi,
Another option you have -- provided that you are running EarlyWatch Reports on all of your systems -- would be to create a single Service Level Report.
You would create a variant that includes all of your systems under the Select for Reporting column. Then under the Content from Solution Manager tab select the System Configuration --> Select for Reporting box.
This System Configuration report will provide you will the hardware info (OS version, CPU, memory), database version, SAP software components/version, and the SAP kernel.
The SLR allows you to extract and aggregate segments of your EWAs into a single report.
Good luck.
Bill

Similar Messages

Looking for a report in LCM(Landed Cost Management)

Dear All,
We are looking for a report in LCM module to print all the unmatched/ partially matched receipt numbers with outstanding balance in accural account.
Does any one have idea on this? or worked on similar reports before?.
Detailed requirement:
There are PO order receipts for which certain costs are estimated viz. Customs Duty, Clearance Chgs. Etc.
Once the receipt is made, the inventory is valued based on the estimates. Subsequently when the actual invoice for the costs i.e. Customs Duty, Clearance Chg. are booked, there could be a variance. This difference in the estimated and actuals gets transferred to inventory provided stock exists.
However if stocks does not exist then the revaluation does not happen. In such cases we need to monitor such balances.

Hi Melvin,
You can use the User Data Dump tool. Check out the following post: https://supportforums.cisco.com/message/3403809#3403809
HTH,
Chris

Looking for a report as below

Greeting,
newbie in VMWare Chargeback, try coouple times, still can not get what I am looking for I am looking for a report for vCloud Director that just include the following information:
1. Information for ASSIGNED number of vCPUs to VM.
2. Information for ASSIGNED Memory to VM.
3. Information for hours for vm ON vs OFF hours
4. Information for ASSIGNED Storage to VM
5. Information for USED storage to VM.
What I got is 3 of this 5 items are 0
Anyone please give me some hints or direction how to to do that
Thanks
newbie

Dear All,
Good Day,
I have two tables Table_1 and Table_2 in MS Accesss with following structure
Table_1
Attendance_Date     Name      Time_In
12-Dec-2014            Smith        7:30
12-Dec-2014            Mark          8:00
12-Dec-2014            Rani          7:45
13-Dec-2014            Smith        8:30
13-Dec-2014            Mark          7:00
Table_2
Attendance_Date     Name      Time_OUT
12-Dec-2014            Smith        5:30
12-Dec-2014            Mark          5:00
13-Dec-2014            Smith        7:30
I am looking for a report as shown below
Attendance_Date     Name      Time_In      Time_Out
12-Dec-2014            Smith        7:30         5:30
12-Dec-2014            Mark          8:00        5:00
12-Dec-2014            Rani          7:45           -
13-Dec-2014            Smith        8:30         7:30
13-Dec-2014            Mark          7:00         -
13-Dec-2014            Rani          -                -
Anyone's help, really appreciate
Regards
Abdussalam

Looking for a specific data in all the cubes and ods

Hi Gurus
"i am looking for all the cubes/ods that contain a specific Controlling area(lets say 0123) and a specific 0plant (lets say plant 4567), now i can go down to every cube and ods and search for it in its contents but i have like hundereds of cubes it will take days, is there a simple way to look for some particular data in all the cubes/ods, and it tells me which cube/ods contains these plants and controlling area."
<b>now based on this above post i got a reply that abaping can help.</b>
"you could write an ABAP where you call for every InfoProvider function RSDRI_INFOPROV_READ_RFC like
loop at <infoprov-table> assigning <wa>.
call function 'RSDRI_INFOPROV_READ_RFC'
exporting
i_infoprov = <wa>
tables
i_t_sfc = i_t_rsdri_t_sfc
i_t_range = l_t_rsdri_t_range
e_t_rfcdata = l_t_rsdri_t_rfcdata
exceptions
illegal_input = 1
illegal_input_sfc = 2
illegal_input_sfk = 3
illegal_input_range = 4
illegal_input_tablesel = 5
no_authorization = 6
generation_error = 7
illegal_download = 8
illegal_tablename = 9
illegal_resulttype = 10
x_message = 11
data_overflow = 12
others = 13.
endloop.
i_t_sfc should contain 0PLANT and i_t_range the restriction on you plant value.
with a describe table statement on l_t_rsdri_t_rfcdata you can get the hits.
check test program RSDRI_INFOPROV_READ_DEMO for details
best regards clemens "
<b>now my question is how do i use this code to check each and every cube in bw, it seems like it is meant to be for only one cube at a time. and what does he mean by "for every infoprovider function"</b>
thanks

THANKS

I am looking for following report

Dear Expert ,
I am looking for following report , please let me know the T codes for follo reports :
a) Assembly Log book Entry
b) Assembly Log book approval
c) Machine log book entry
d) Machine Log book approval
e) Monthly attendance
f) Monthly progress
g) Monthly opening balance Entry
h) Recalculation of Index
Reports
b) Daily log book Report
c) Incentive Details
d) Incentive Summary
Points will be rewarded .
Neal
Edited by: Neal Gibson on Oct 23, 2008 11:53 AM

Thanks for your reply . I know SAP1 and SAP2 but I am not HR guy . I just wanted to know th T codes from where I can get those reports .

I am looking for Crystal reports arleady designed.

I am looking for Crystal reports already designed. Does anyone know where I could fine them?

Navin,
Thanks for the reply, I have another question you might be able to answer.
I have a picture field (blob field) on the same line as our Product ID field (regular data field) and i want the report to show the picture that goes with that Product ID. 50% of our products dont have pictures, so when I print the report, it currently prints large empty spaces for the Products that dont have pictures and makes the report quite long and unattractive.
I have tried to supress the field and also put the field in its own section and use a formula for supressing if the data is blank, but I get the error message that says "Can not use a BLOB field in a formula".
I need to find a way around this. Can you, or any of your experts help?
I could send you the report with some data in it if that would help.
Thanks again!
JM

Looking for 2 reports

I am looking for 2 reports:
1. A report to tie the AA subledger to the General Ledger. In our company, we have several scenarios in which we post retirements/acquisitions with value dates in the past months and post it in the current period (which is open). This causes the balance on the subledger to change as of that value date, which is fine. However I cannot find a standard report to tie the balance to the sub-ledger. The report date on the standard report seems to pick up transactions in the subledger even if they have a future posting date. e.g. Report date 3/31 would pick up transactions that were posted with a value date of 3/15 but a posting date of 8/31. I need a report where I can pull balances by the Posting Date. The auditors need this to ensure that the sub-ledger and G/L are in sync. I am sure this is not an exceptional requirement. Can any one tell me how they handle this?
2. I need a depreciation comparison report where I can compare depreciations of each period in a year side by side. Something that would have all the 12 periods and the total depreciation for say an asset class.
Thanks

Thanks for the response once again. I already know about ABST2 but the auditors want detailed reports. ABST2 just gives you the differences. Now as for the Asset Balances and the FS10N, thats where the whole issue starts. The auditors come in every 4 months and they look at the sub-ledger and G/L for those months to try and tie it out. Here the reason why we have an issue.
Example: Say the FA balance was 1000000 as of 3/31 and it tied to the G/L as of 3/31. On 9/15 I post an entry to acquire an asset for 30000 with a value date of 3/20. The result is that if you run the asset balances report as of 3/31, it would show a balance of 1030000 and also an increase in the planned accum. However if you run the FS10N and look at the cumulative balance at the end of March, it would be still 1000000 since the 30000 was posted to the G/L in september and not march. When the auditors look at these 2 reports, they think that sub-ledger and G/L does not reconcile. I tried to explain the reason and they understood. However, they need a report to see it.

HT201401 I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to und

I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to under ringtones. Does anyone have any tips on how to do this.

http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
https://discussions.apple.com/message/17777381 - making a ringtone
Getting ringtones folder to show in iTunes - https://discussions.apple.com/thread/2629494 - iTunes > Preferences. Under the General tab below Show, confirm Ringtones is selected

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

Looking for a way to get built in audio to be heard out of AirTunes

Looking for a way to get built in audio to be heard out of AirTunes, not just iTunes.

thanks for the post, i downloaded that app but like i read, its really a worthless piece of junk, the 2 second delay yet alone i did not succeed to send my iChat audio to my airTunes speakers.

I just updated my phone to iOS7 and me and my mom have the same apple ID, so now for some reason I get all the text messages that are sent to her iPhone on mine..? Help please!!

I just updated my phone to iOS7 and me and my mom have the same apple ID, so now for some reason I get all the text messages that are sent to her iPhone on mine..? Help please!!

Stop sharing an Apple ID. That is the cause.
Settings > Messages > Send & Receive > You can be reached for messages at...

Looking for a distributor to get AIR-LMC352 cards

Hi
I'm looking for a distributor to get this end of sale card of Cisco
thanks

Hi Manel,
Here are a few distributors who seem to have this card in stock-Price range $159 - $225 US
http://www.teksavers.com/store/product.php?productid=580249&gclid=CLb6os_qj4oCFQgTWAodkTi2nA
http://www.nextag.com/air-lmc352/search-html
http://www.hulanetworks.com/usedCisco/AIR-LMC352.html
http://www.bizrate.com/nic/cisco-airlmc352--pid11490014/
http://www.mysimon.com/Wireless-Adapters/9000-11609_8-0.html?mlpid=20636477
Hope this helps!
Rob

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Wasn't sure which version you are using, so here are the two i think you might be using:
[CR for VS2005|https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip]
[CR for VS2008|https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip]

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

Report to get all the infotype maintained for pernr.

Hi all Experts,
i wanted to know whether there is any report which gives all the infotype which are maintained for some pernr.
Thx.
Raj.

SE38 HTWLINF0
RPUAUD00 both fo these reports are used for ur requirment and also when an user has modified the infotype
Edited by: Sikindar on Jan 8, 2009 10:27 AM

Looking for a report to get all managed system components

Similar Messages

Maybe you are looking for