Looking for a specific photoshop font

I'm looking for this font here: http://i89.photobucket.com/albums/k229/ohgoddammit/photoshopfontcopy.jpg
Thanks in advance!

Wow. I was gonna say go to http://www.myfonts.com/WhatTheFont/ too, but that's probably too small a source file for it. As John said, some of the users there may be able to help. Try Robert's suggestion as well.

Similar Messages

Looking for a specific transition

I'm looking for a specific transition - I have an image layer of a credit card, that starts out only showing the thin edge, then flips out to reveal the flat surface of the card. Closest I could find in FC was 3D Spinback.
Can you recommend a good source of FC transitions, free or paid? One that shows previews would be especially good.

I thought you might have this issue, and I had meant to point out a problem with your workflow, but it slipped my mind.
The file you're working with is a .psd, and it contains 1 layer, rather than being a flattened image. So what's happening is that when you drop the file into the Sequence it becomes a Nested Item.
That's why when you double click it, it opens in its own sequence, constrained to its own dimensions. When you add the basic 3d filter, you are then animating it in that sequence, rather than the main sequence.
Without going back to Photoshop, the easiest fix is to
1. Cut the effect from the clip.
2. Go back to the main sequence and Option Double Click the clip. You are now accessing the master clip, rather than its subclip which is the single .psd layer.
3. Paste the filter. I believe your keyframed motion will be retained, and the clip will now rotate in the main sequence without cropping.
4. Remember from here on that to access the filter again you have to Option Double Click the layer.

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

Looking for a specific title...

Hi,
I have been scouring the usual plug-in sources for iMovie looking for a specific kind of title. Since I have not found it, I thought I would describe it here to see if anyone knows if it exists or where I can get it.
I am looking for a title which scrolls multiple lines of text one at a time to a paused position. i.e.
Line #1: Scrolls to top of screen and pauses. Remains.
Line #2: Scrolls to just below line one and pauses. Remains
Line # 3: Scrolls to just below line two and pauses. etc.
I am looking for a way to tell a story on one title screen in a sort of dramatic way. I want my viewer to digest the first part of the information and then have the remaining info scroll up. Does that make sense?
If anyone out there has any clue as to what I am talking about, I'd love to hear from you!
Thanks,
Shannon

I guess I should had stated that I need a laptop no questions asked, I need it to be portable. If an external monitor was an option I may as well get a desktop... I'm aware of laptop's short comings but what I was hoping to gain from this post was information on current models that fulfill decent photo editing specs, in regards to laptops.. not desktop solutions..
So those expensive models you mentioned would be a good start. Would you mind sharing them with me? I've linked a model I'm pretty interested in, and would like the opinion of the community on it's potential and maybe any other models they know of that can match it.
Thanks again.
http://www.engadget.com/2014/06/02/asus-zenbook-nx500-hands-on/#comments

Looking for a specific QuickTime player

Hi,
I'm looking for a specific QuickTime player. The one that has the interface with round buttons like tear drops and not the flat buttons the we have today. I think it is in version 6 of QuickTime but I'm not sure. If someone could send me only the player. If you need a picture of the buttons, I can send you one...
Regards,
Harmonium
iMac G5 Mac OS X (10.4.4)

Well, is controlling Audacious from the tray all that... needed?
I use Global Hotkeys and have quite a few bindings set up. They work surprisingly well.
The list as it appears in the hotkey editor window:
Previous Track: Control + Alt + Prior (PgUp)
Play: Control + Alt + Return
Pause/Resume: Pause
Stop: Control + Alt + End
Next Tracks: Control + Alt + Next (PgDn)
Forward 5 seconds: Control + Alt + Right
Rewind 5 seconds: Control + Alt + Left
Volume Up: Control + Alt + Up
Volume Down: Control + Alt + Down
Pause/Resume: Control + Alt + Insert
Stop: Control + Shift + F11
Pause/Resume: Control + Shift + F12
Next Track: Control + Shift + F10
Forward 5 seconds: Control + Shift + F6
Rewind 5 seconds: Control + Shift + F5
Previous Track: Control + Shift + F9
Toggle Player Windows: Super + e
-dav7

Looking for a Specific product

Hello,
I am looking for a specific Desktop PC. Similar to M73 ThinkCenter in size, but needs to have 3-4x HDMI inputs. This computer will run digital menus for restaurants/coffeeshops 24/7. The M73 has display ports but we are looking to move away from having to buy display ports to just plugging directly into the computer through HDMI.
Thanks in advance for the info.

..... a computer.
In all seriousness, an HTPC would be the easiest, but there's also Rokus, here's the first one I grabbed.
http://www.bestbuy.com/site/Roku+-+2+XS+Wireless+Digital+Media+Player/2825032.p?id=1218355858277&sku...
Now, personally I have no experience with them, but do know they're quite popular.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

Error R32762: # Error: Error looking for resource specification. Need 'resource' or 'type'

I have succesfully ported some of my developments to CS5. I have used the following procedure:
- create new project by using dollyX
- add source code
- fix the errors
But now I have encountered an error I can't figure out.
Error 1 error R32762: # Error: Error looking for resource specification. Need 'resource' or 'type'. C:\Program Files\Adobe\CS5\InDesign Product SDK\source\public\interfaces\architecture\IPMUnknown.h 47
Any suggestions?
Im running a windows7 machine, visual studio 2008

Pectora:
   First of all, I'm assuming that you are receiving this error on a Win box. If on a Mac, then your problems may stem from something else altogether.
   It's a bit complex to cover in an email. My recommendation is that you open up a couple of the sample plugins and look at them. Pay close attention to the Properties page of the project. Look at the Resources field and command line, and also pay attention to the Pre-Link and Post-build fields. Once they are looking right, highlight your .FR file and click the Properties icon. Be sure that all four lines have something in them. Model their input after what you see in the sample plugins.
   Finally, are you getting this error when the ODFRC compiler is running, or when the project is getting linked? The former could indicate a problem with your .FR file, the latter is more likely to be solved by my first suggestion.
R,
John

I'm looking for the old Mac font called Techno. Does anyone have it to send to me? Thanks!

I'm looking for the old Mac font called Techno. Does anyone have it to send to me? Thanks!

So you googled, "techno font" and came up with nothing? Hard to believe.
http://www.google.com/search?client=safari&rls=en&q=techno+font+download&ie=UTF- 8&oe=UTF-8

Looking for old-school "VT100" font ...

I'm just wondering if anyone has the old VT100 / VT102 system fonts that were used for coding back in the day. Everywhere I look says they were OS9 fonts, but I'd like to load it on my MacPro.
I'm doing a video project where I need that old, aliased font. Specifically, I'm trying to find an exact match for this font and I think VT100 would get me awfully close ...

Everywhere I look says they were OS9 fonts, but I'd like to load it on my MacPro.
That is correct. OS 9 supplied a legacy Mac TrueType font named VT102Font . These still do work in all versions of OS X. So if you have a copy of OS 9 around, or an older Mac running OS 9, you can copy the font to your new Mac.

Looking for help on good fonts to use in Illustrator

Hi,
I am new to Adobe illustrator, sort of making a migration from Fireworks. Can some one give me recommendation on some of the best fonts to use in Adobe illustrator for designing fonts.I am working on a school project for designing Fonts for Computer programming course that i will be giving.
thanks in advance

The fonts that come ( or used to anyways ) with CS apps ( goodies folder ) should give you plenty of decent fonts to get started with. Lengthy technical Whitepapers might look better using a serif font similar to Adobe Jenson Pro. Charts and graphs would look good using a sans serif like Myriad Pro. Subheads, heads, call-outs look good as Sans Serifs. Body copy reads better using serifs. You might take a look at other manuals similar to what you want to do and use them as a gauge for your manuals.

Looking for a specific data in all the cubes and ods

Hi Gurus
"i am looking for all the cubes/ods that contain a specific Controlling area(lets say 0123) and a specific 0plant (lets say plant 4567), now i can go down to every cube and ods and search for it in its contents but i have like hundereds of cubes it will take days, is there a simple way to look for some particular data in all the cubes/ods, and it tells me which cube/ods contains these plants and controlling area."
<b>now based on this above post i got a reply that abaping can help.</b>
"you could write an ABAP where you call for every InfoProvider function RSDRI_INFOPROV_READ_RFC like
loop at <infoprov-table> assigning <wa>.
call function 'RSDRI_INFOPROV_READ_RFC'
exporting
i_infoprov = <wa>
tables
i_t_sfc = i_t_rsdri_t_sfc
i_t_range = l_t_rsdri_t_range
e_t_rfcdata = l_t_rsdri_t_rfcdata
exceptions
illegal_input = 1
illegal_input_sfc = 2
illegal_input_sfk = 3
illegal_input_range = 4
illegal_input_tablesel = 5
no_authorization = 6
generation_error = 7
illegal_download = 8
illegal_tablename = 9
illegal_resulttype = 10
x_message = 11
data_overflow = 12
others = 13.
endloop.
i_t_sfc should contain 0PLANT and i_t_range the restriction on you plant value.
with a describe table statement on l_t_rsdri_t_rfcdata you can get the hits.
check test program RSDRI_INFOPROV_READ_DEMO for details
best regards clemens "
<b>now my question is how do i use this code to check each and every cube in bw, it seems like it is meant to be for only one cube at a time. and what does he mean by "for every infoprovider function"</b>
thanks

THANKS

Looking for a specific tutorial

I just got Photoshop Elements free with a Wacom tablet and I would like to tinker with it. I've always wanted to take a photo and edit it so that everyone has the same person's head just as a gag. I was wondering if anyone knows of any tutorials that show how to go about doing this sort of thing.

Looks like we'll have to put the miracle status on hold for a bit...that's not the article he's looking for. I've seen the same one before, and I'm pretty sure it came from Mark Spencer. He demonstrates the use of the Motion 3 "motion-tracking" tool by shrinking the head of a guy walking across a parking lot. Pretty cool tutorial and not at all the same one in the link above.
Wish I knew where I'd seen it, but I can't recall at the moment.

Looking for a specific 8-bit synth plugin

There was one I found a while ago (maybe a year or so) that had a lot of Nintendo-type preset sounds. At the time, it wasn't Leopard compatible so I didn't keep it on my system. I've done some searching and checked out a couple plugins since including Magical 8-bit plugin and Chip32, but none have had the wealth of presets that first one did. I know I can recreate any of the sounds I want using those or Logic's own plugs, but I have a small project with a tight turnaround and haven't really worked with this kind of stuff before. Anyone have any idea which plugin I'm looking for? I know my description doesn't give you a whole lot, but if you know any such plugins that had more specific presets than just "square," "triangle," etc. I'd love to check them out. Thanks.

Thanks for both those suggestions. I believe the one I'm thinking of was freeware, but those two do look pretty solid.

Looking for feedback on Photoshop web compatibility tool

We initially build https://www.oss-usa.com/psd-parser?promo=psd-parser as internal tool for validating Photoshop artwork against known web compatibility issues and recently made it available as a free online service. Looking for feedback from folks actively using Photoshop on web design projects.

Hello otechcomputing. is this how you want to setup your network?
If so, Guest Networks cannot be " extended" since it has Website Authentication encryption which the RE1000 does not support. Here are my suggestions:
1. Main Network WiFi password should be WPA2 Personal (more secured)
2. Enable Guest Access (password protected)
3. Reconfigure the RE1000 to connect to the EA6500 (main network) and change the extender's network name and password (still WPA2 Personal). You can name it with "EXT" at the end to designate it as such.

Looking for a specific photoshop font

Similar Messages

Maybe you are looking for