Looking for feedback on Oracle Solaris Studio Express 6/10

Just a reminder that if you encounter bugs or have request for enhancements (RFEs), please submit them at:
[http://bugs.sun.com|http://bugreport.sun.com/bugreport/]
In addition, please take 5 minutes to fill out a short survey about your experience with Solaris Studio Express 6/10:
[OSSX 6/10 Survey Link|http://bit.ly/c9poXo]
The development teams do closely review these submissions and it is used by teams, and management, to prioritize development for future releases.
Thank you!
/kso

I know you have a more general concern, but here is the answer on SBR.
SBR - beyond Stack Bounds Read
foo () {
int a[5] = {0, 1, 2, 3, 4};
int i = a[-100]; // Read is beyond stack frame bounds
Possible causes: Reading a local array past the end or before the start.

Similar Messages

  • Oracle Solaris Studio Express 6/10 - Now Available!

    We are pleased to announce the availability of Oracle Solaris Studio Express 6/10, which can be freely downloaded here:
    *[http://developers.sun.com/sunstudio/downloads/express/]*
    Sun Studio Express has be renamed Oracle Solaris Studio Express. Supporting both Solaris 10 (SPARC, x86) and Linux distributions (OEL 5, RHEL 5, SuSE 11), Oracle Solaris Studio Express 6/10 will be made available on OpenSolaris in the near future. Downloads included both the package installer (SVR4, RPM) and non-package tarballs.
    Highlights include the following:
    => C/C++/Fortran compiler optimizations for the latest UltraSPARC and SPARC64-based architectures such as UltraSPARC T2 and SPARC64 VII
    => C/C++/Fortran compiler optimizations for the latest x86 architectures including Intel® Xeon® 7500 processor series (Nehalem-EX) and 5600 processor series (Westmere-EP)
    => Enhanced debugging and code coverage tooling
    => Improved application profiling with the Performance Analyzer
    => Updated IDE based on NetBeans 6.8
    Please provide feedback via the Customer Feedback program, where you can file bugs/rfes, make your voice heard via a short survey, and discuss the product in the Studio forums:
    *[http://developers.sun.com/sunstudio/customerfeedback/]*
    Thanks!
    /kso

    Hi,
    we are currently using SunStudio 12. I have noticed that early access product, SunStudio Express, Feb2008. It seems that new features coming from NetBeans 6.0 have contributed to SunStudio IDE. I prefer to use SunStudio Express IDE. But i have also noticed that sun CC compiler version is also different. Actually it is no surprise, since SunStudio is a complete product composed of compilers, tools and IDE.Now, i am quite doubtful whether we should use SunStudioExpress. That's why i want to learn when official new release for SunStudio will be announced.
    Though i have searched internet, i couldn't notice any news about the next official release of Sun Studio( Sun Studio 13 ). When will this early release( SunStudio Express, Feb 2008 ) be released as SunStudio13? What is the release roadmap of SunStudio?

  • Looking for Feedback on Solaris Studio 12.2 Documentation

    Send us feedback about Solaris Studio 12.2 Documentation. What's missing? What do you use the most? What do you like/dislike? What would you like to see in future releases?
    Start here: http://www.oracle.com/technetwork/server-storage/solarisstudio/documentation/index.html
    --Richard Friedman, for the Oracle Solaris Studio documentation team.

    I know you have a more general concern, but here is the answer on SBR.
    SBR - beyond Stack Bounds Read
    foo () {
    int a[5] = {0, 1, 2, 3, 4};
    int i = a[-100]; // Read is beyond stack frame bounds
    Possible causes: Reading a local array past the end or before the start.

  • Oracle Solaris Studio 12.4

    NetBeans 7.2 is announcing Oracle Solaris Studio 12.4. So i would like to know when, what, ... etc.
    Thanks.

    OK, I did find "12.4" mentioned in some NB code updates. Apparently that was work intended to support a future Studio release. The person making the updates chose to use an inappropriate designation, one that might not ever apply to any Studio release.
    Studio releases are usually preceded by a public pre-release (aka "Beta") program. We welcome Forum members to try out the next pre-release when we announce it here.

  • Looking for feedback on Photoshop web compatibility tool

    We initially build https://www.oss-usa.com/psd-parser?promo=psd-parser as internal tool for validating Photoshop artwork against known web compatibility issues and recently made it available as a free online service.  Looking for feedback from folks actively using Photoshop on web design projects.

    Hello otechcomputing. is this how you want to setup your network?
    If so, Guest Networks cannot be " extended" since it has Website Authentication encryption which the RE1000 does not support. Here are my suggestions:
    1. Main Network WiFi password should be WPA2 Personal (more secured)
    2. Enable Guest Access (password protected)
    3. Reconfigure the RE1000 to connect to the EA6500 (main network) and change the extender's network name and password (still WPA2 Personal). You can name it with "EXT" at the end to designate it as such.

  • ITunes DJ suggestion (looking for feedback)

    Firstly, I HAVE sent this in as a suggestion already, but I am looking for feedback and suggestions from any of you to improve this.
    I just got into using iTunes DJ, and I think it is great. The only problem I have is the lack of simplicity to request songs. Not dealing with the wireless aspect (iPhones), DJ seems like it could be simplified rather than searching around different sections of iTunes, right clicking, dragging/dropping, whatever. This problem can arise when you are using this application for a party, and just anyone can walk up to request a song. Not everyone will know how it works, so they could easily search around and accidentally double click a song, defeating the purpose of DJ. Instead, why not just have a "view browser" option inside DJ, but with a few tweaks to go along with this specific application. The main change would be viewing "songs" in the browser along with "artist", "album", etc. Another difference, would be that these songs cannot be double clicked in order to solve the double clicking issue. Once the song is selected, there is a "request" button that, once pushed, it goes right into the queue just like any other meathod. This route, there is no leaving DJ. It can always stay right on the same page. Now, while some might not run into these kind of problems, it will still streamline the request feature a lot smoother for everyone. Lastly, Since DJ can have a selected source, such as a specific playlist, the browser should have one as well. This would be nice if you want to allow your guests to select any song, but have the main source of DJ play from a certain playlist. I have taken the liberty to edit a quick version of what I think it could look like. I would appreciate any feedback.
    Oh, and i thought of a random button as well, but didnt know what it should look like or how it would work specifically.
    http://i13.photobucket.com/albums/a257/kaptnsassypants/iTunes.jpg
    I can post a higher quality if needed.

    I thought I might give some updated information based on my current findings. It seems like it is actually a proximatey problem. Taking my computer closer to the unit seems to resolve the problem, but it is definately not out of range where I was trying to transmit from. I was still getting almost a full signal. Has anyone else had the same problem with the range not being very good?

  • Looking for feedback from those who have installed Windows

    I have an Intel iMac - brilliant machine, I love it. I have not installed Windows : I just don't have the need to justify doing it, but I'm glad to know I can if I do need, or just want to.
    Having a Mac is almost like being immune to viruses (almost - I'm not careless). Everytime I use a PC there are message about viruses - it must drive them crazy! And to install Windows on my iMac would render it vulnerable.
    I'm just looking for feedback from those who have taken the plunge: how's it working for you? I'm not so concerned about the speed...more so about .exe files running amok.
    There is no way I will install Windows without a valid need and hearing at least a couple of first hand user experiences

    I HAVE SPENT 1 HOUR TODAY AT THE APPLE SHOP ASKING THE GENIUS GUY - WHY ARE APPLE COMPUTERS IMMUNE TO VIRUS AND HOW DO I PROTECT MY PERSONAL INFORMATION FROM BEING INTERROGATED AND TRANSMITTED TO THE OUTSIDE WORLD.
    MY QUERY STEMS FROM EMAILS - IF THEY HAVE A PICTURE ATTACHED THE MACHINE WILL NOT OPEN THE PICTURES - THE MESSAGE SAYS TO PROTECT MY IDENTITY CLICK HERE IF YOU WISH TO DOWNLOAD. I HAVE TO MAKE A JUDGEMENT TO TRUST THE SITE WHICH SEEMS ODD AND SO WHEN I ALLOW THE DOWN - I DO WONDER WHAT IS GOING ON.
    I DO RUN A SEPARATE PC AND WHEN I DOWN LOAD THE MAILS ONTO THAT COMPUTER MY NORTON ENGAGES AND WARNS OF INFORMATION OF PRIVATE NATURE BEING ATTEMPTED TO BE TRANSMITTED - AT THAT STAGE I CAN STOP THE TRANSMISSION - ON THE MAC I HAVE NO MEANS - THE GENIUS GUY SAYS DON'T WORRY.
    HELP - CAN ANYONE TELL ME WHAT IS IT ABOUT MAC THAT WOULD SETTLE MY CONCERNS AND ALLOW ME TO DOWN LOAD IMAGES CONTAINED IN EMAIL WITHOUT WORRY OF THE COMPUTER BEING FRISKED FOR DATA AND IT BEING TRANSMITTED INTO THE OUTSIDE WORLD.

  • Setting up a remote build host in Oracle Solaris Studio 12.3

    I'd like to use the remote build host feature of Oracle Solaris Studio 12.3.
    I'm running Solaris 11.0 (soon will upgrade to 11.1) everywhere.
    The idea is that the remote build host be a NGZ of a server where Oracle Solaris Studio 12.3 has been installed via IPS.
    At the other end is a Solaris 11 desktop.
    I couldn't find in the documentation enough information to help me understand how to perform this setup.
    Does anybody have successfully set up a remote build host?
    If so, please, how?
    Thanks in advance,
    Carlos.

    This has been solved by SR where all things were clarified.
    The summary of solution I adapted to my needs I have shared on my blog on
    http://learnings-on-solaris.blogspot.com/2012/11/c-remote-build-host.html
    Regards.

  • MOVED: Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

    This topic has been moved to Overclockers & Modding Corner.
    Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

    Im no pro but with your raid setup you need to stay with bios 3.0, 3.1 or 3.2.  I understand that 3.3 & 3.4 causes problems but the new 3.53 beta bios fixes the problems in 3.3 & 3.4.  See below:
    https://forum-en.msi.com/index.php?topic=80933.120
    Regarding your pcie clock, if you are using coolbits and nvidia drivers only (no MSI drivers at all), then I have used nvidia's ntune to help set the clock.  For my x1 msi 6600gt, working backwards from the bus speed optimization it equalled to 106...but I am really not good at this and you should post your question under the VGA portion of this forum for a better answer to that 1 question.
    However, using MSI's DOT works well too and its automated.
    Btw, the pcie setting has nothing to do with your cpu/memory overclock.

  • Deal-breakers for real use of Solaris 11 Express

    I run Solaris 10 U9 for my home 12TB NAS box - based on Supermicro H8SSL-i2 motherboard (ServerWorks HT1000 Chipset and Dual-port Broadcom BCM5704C) and their 8-port SATA2 PCI-X card (AOC-SAT2-MV8). It's a great (but aging) platform and a rock solid OS with the unbeatable ZFS volume manager/filesystem.
    However, despite my willingness to run Solaris 11 Express in this role, I can't because of these deal-breakers:
    1) Lack of a full-featured installer that allows me to lay out or preserve existing partitions the way I want. Making /var a separate file system is a must. Ideally, I'd be able to run multiple versions of Solaris on the same box by customizing grub, and use my ZPOOLs on either Solaris 10 or 11 Express while I learn the new OS.
    2) Lack of support for the Broadcom BCM5704C dual-port gigabit NIC (and others), which work wonderfully under Solaris 10, but are badly broken under Solaris 11 Express. I know I could disable the on-board Broadcom NICs and go buy an Intel card - but why the need for this? Won't there be a fix for Broadcom NICs?
    3) Lack of support for modern, generic, server-class motherboards and PCI-e multi-port SATA/SAS cards. I wonder about the future for Solaris without support for modern, affordable x64 server hardware.
    Maybe I'm missing the point and Solaris 11 Express is only intended to be run as a virtual machine under VBox or VMware. But it would sure be nice to be able to run it on my real hardware - even if it is just a small hobbyist rig. Any suggestions?
    Regards,
    Mike

    In Solaris 11, you get a separate /var by default. If you update from Solaris 11 Express to Solaris 11, this transition doesn't happen automatically. If you decide to tackle it on your own, you need to be sure that it is done in a way that beadm, pkg, and other consumers of libbe will handle properly. I would recommend something along the lines of the following. This is untested and may break your system - prove it out somewhere unimportant first.
    Do the work in a new boot environment so you reduce the likelihood that you will break things in an unrecoverable way.
    # beadm create sepvar
    # beadm mount sepvar /mntFigure out the name of the root dataset of the new boot environment, then create a var dataset as a child of that.
    # rootds=$(zfs list -H -o name /mnt)
    # zfs create -o mountpoint=/var -o canmount=noauto $rootds/varMount this new /var and migrate data
    # mkdir /tmp/newvar
    # zfs mount -o mountpoint=/tmp/newvar $rootds/var
    # cd /mnt/var
    # mv $(ls -A) /tmp/newvarUnmount, remount
    # umount /tmp/newvar
    # beadm unmount sepvar
    # beadm mount sepvar /mntAt this point /mnt/var should be a separate dataset than /mnt. The contents of /mnt/var should look just like the contents of /var, aside from transient data that has changed while you were doing this. Assuming that is the case, you should be ready to activate and boot the new boot environment.
    # beadm activate sepvar
    # beadm unmount sepvar
    # init 6

  • Oracle Solaris Studio 12.3 - Now Available!

    http://www.oracle.com/technetwork/server-storage/solarisstudio/downloads
    Highlights include:
    * 3x faster code on SPARC T4 than common open source compilers; 40% faster than Sun Studio 12
    * 1.5x faster code on Intel x86 than common open source compilers; 20% faster than Sun Studio 12
    * New Code Analyzer tool for more reliable applications; reports common coding & memory access errors faster than competitive alternatives
    * Enhanced Performance Analyzer tool now with system-wide performance analysis
    * Remote access to Solaris Studio tools from local desktop (Microsoft Windows, Mac OS, Linux, Oracle Solaris)
    * Streamlined Oracle DB & MySQL application development
    * Up to 20% faster compile time
    Check out screenshots of the GUI tools: http://bit.ly/rANGSc
    To learn more and check out the latest feature highlights, briefs, white-papers, documentation and more, please visit:
    http://www.oracle.com/technetwork/server-storage/solarisstudio/overview
    Also, check out a replay of the launch webcast: http://tinyurl.com/766gnmw
    /kso

    Why does it require svn 1.5 ?
    As far as i know basic svn commands didn't change between 1.4 and 1.5
    Studio 12.1 worked great with svn 1.4

  • Looking for very old oracle client  (oracle8 server)

    I'm looking for a link to download a linux oracle client to connect to an oracle 8 (8.0.6) db server. (idealy for debian)
    All the links i found are not available anymore and oracle download site is only for 10g or 11g instant client version.
    Do you have an idea / a solution ?
    Thanks
    Franck

    Is this related to {thread:id=2317617}?
    Try edelivery.oracle.com.
    If no luck there, try requesting archived software via MOS.

  • Looking for book on Oracle Business Intelligence (formally Hyperion/Brio)

    Does anyone know of a good book about the newest versions of the Oracle Business Intelligence tools? I don't see much at Amazon when I search for Oracle Business Intelligence. I am looking for Oracles direction with the product and information about the 11G web based versions.
    Any information would be appreciated.
    Thanks.

    Book was not released but, you can learn all about oracle BIEE meta data development, answers, dashboards..
    Meta data developement guide(also called server administration guide) which covers building physical, business and presentation layer development, frargmentation and cache setting, variables.
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31770.pdf
    About answers and dashbaords..
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31767.pdf
    but these books explains only how do it and what is what. No basic examples like other tech books.
    For the example development/project follow the link( this includes advanced stuff also)
    http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/index.html
    Hope this helps until the book is released, But strong feeling book may not cover this much,but we can get some good examples on every case with definitions.
    - Madan

  • Not able to install Gcc on Oracle Solaris-11-express

    Hi,
    I installed Solaris-11-express using live cd ans also text based cd on VM.
    In package manager I could see gcc package but its not getting installed . Its throwing me error .
    So I manually downloaded the gcc tar file and still not able to install. please help.

    I am trying to install iozone, this requires gcc, now gcc is installed properly but iozone is not installing.I am pasting the error with this,
    root@solaris:~/iozone3_353/src/current# make Solaris10gcc-64
    Building iozone for Solaris10gcc-64
    gcc -O -c -Dunix -DHAVE_ANSIC_C -DASYNC_IO -D__LP64__ \
    -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Dsolaris \
    -m64 libbif.c -o libbif10-64.o
    gcc -O -c -Dunix -DHAVE_ANSIC_C -DASYNC_IO -D__LP64__ \
    -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Dsolaris \
    -DNAME='"Solaris10gcc-64"' -m64 libasync.c -o libasync10-64.o
    gcc -c -O -Dunix -DHAVE_ANSIC_C -DASYNC_IO \
    -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Dsolaris \
    -DNAME='"Solaris10gcc-64"' -m64 iozone.c -o iozone_solaris10gcc-64.o
    Building fileop for Solaris10gcc-64
    gcc -c -O -m64 fileop.c -o fileop_Solaris10gcc-64.o
    Building the pit_server
    cc -c pit_server.c -o pit_server.o
    gcc -O -m64 iozone_solaris10gcc-64.o libasync10-64.o libbif10-64.o \
              -lthread -lpthread -lposix4 -lnsl -laio \
              -lsocket -o iozone
    gcc -O -m64 fileop_Solaris10gcc-64.o -o fileop
    gcc -O -m64 pit_server.o -lthread -lpthread -lposix4 \
              -lnsl -laio -lsocket -o pit_server
    ld: fatal: file pit_server.o: wrong ELF class: ELFCLASS32
    ld: fatal: file processing errors. No output written to pit_server
    collect2: ld returned 1 exit status
    make: *** [Solaris10gcc-64] Error 1
    Edited by: 817795 on Dec 9, 2010 11:03 PM

  • Improving ASR9k resilience - Looking for feedback.

    Asking all our customers.  
    Looking for some other examples where we had an issues on the a9k where we might have some gap in system resiliency.  Looking for issues where we might have seen a HW or SW issue and the router didn't handle it in a way you would have preferred to allow network redundancy to take over.  Please provide as much information about the situation as you can.  As well as what behavior you believe should take place?  If you have SRs or bug IDs please include as well. 
    Here are some examples of the past that we have already addressed. 
    CSCuc04493 - Disable LC interfaces if online-diags reports datapath error
    This allows us to shutdown ports where datapath errors occur to allow network redundancy to kick in.
    CSCun00493 - Need recovery mechanism for Punt/FPGA CRC errors in RSP440 
    This has the RSP perform a failover or reload when it loses communication to the fabric.  
    Thanks,
    Bryan Garland 
    Bryan Garland  CCIE#1942
    Technical Leader, Engineering
    HERO BU- Deployment & Escalation

    Hi Bryan,
    I see the NP performance as an area for improvements. There are certain NP lock conditions where automatic action is taken to recover from this situation, but there is no such thing when it comes to an NP overload scenario. There are certain NP counters which indicate an NP performance overload, but it is cumbersome for the customers to monitor these values. So it would be nice to at least have logging entries if the NP is overloaded or the ability to have actions taken. A typical example would be netflow, which is intensive for the NP because it needs to create frame copies for netflow. There is a punt policer that protects the line card CPU, but with very low sampling rates and small packets at a high rate the NP might get overloaded, leading to intermitting packet loss (rare but possible).
    Cheers,
    Florian

Maybe you are looking for