Looking for feedback on Photoshop web compatibility tool

We initially build https://www.oss-usa.com/psd-parser?promo=psd-parser as internal tool for validating Photoshop artwork against known web compatibility issues and recently made it available as a free online service.  Looking for feedback from folks actively using Photoshop on web design projects.

Hello otechcomputing. is this how you want to setup your network?
If so, Guest Networks cannot be " extended" since it has Website Authentication encryption which the RE1000 does not support. Here are my suggestions:
1. Main Network WiFi password should be WPA2 Personal (more secured)
2. Enable Guest Access (password protected)
3. Reconfigure the RE1000 to connect to the EA6500 (main network) and change the extender's network name and password (still WPA2 Personal). You can name it with "EXT" at the end to designate it as such.

Similar Messages

  • ITunes DJ suggestion (looking for feedback)

    Firstly, I HAVE sent this in as a suggestion already, but I am looking for feedback and suggestions from any of you to improve this.
    I just got into using iTunes DJ, and I think it is great. The only problem I have is the lack of simplicity to request songs. Not dealing with the wireless aspect (iPhones), DJ seems like it could be simplified rather than searching around different sections of iTunes, right clicking, dragging/dropping, whatever. This problem can arise when you are using this application for a party, and just anyone can walk up to request a song. Not everyone will know how it works, so they could easily search around and accidentally double click a song, defeating the purpose of DJ. Instead, why not just have a "view browser" option inside DJ, but with a few tweaks to go along with this specific application. The main change would be viewing "songs" in the browser along with "artist", "album", etc. Another difference, would be that these songs cannot be double clicked in order to solve the double clicking issue. Once the song is selected, there is a "request" button that, once pushed, it goes right into the queue just like any other meathod. This route, there is no leaving DJ. It can always stay right on the same page. Now, while some might not run into these kind of problems, it will still streamline the request feature a lot smoother for everyone. Lastly, Since DJ can have a selected source, such as a specific playlist, the browser should have one as well. This would be nice if you want to allow your guests to select any song, but have the main source of DJ play from a certain playlist. I have taken the liberty to edit a quick version of what I think it could look like. I would appreciate any feedback.
    Oh, and i thought of a random button as well, but didnt know what it should look like or how it would work specifically.
    http://i13.photobucket.com/albums/a257/kaptnsassypants/iTunes.jpg
    I can post a higher quality if needed.

    I thought I might give some updated information based on my current findings. It seems like it is actually a proximatey problem. Taking my computer closer to the unit seems to resolve the problem, but it is definately not out of range where I was trying to transmit from. I was still getting almost a full signal. Has anyone else had the same problem with the range not being very good?

  • Looking for feedback from those who have installed Windows

    I have an Intel iMac - brilliant machine, I love it. I have not installed Windows : I just don't have the need to justify doing it, but I'm glad to know I can if I do need, or just want to.
    Having a Mac is almost like being immune to viruses (almost - I'm not careless). Everytime I use a PC there are message about viruses - it must drive them crazy! And to install Windows on my iMac would render it vulnerable.
    I'm just looking for feedback from those who have taken the plunge: how's it working for you? I'm not so concerned about the speed...more so about .exe files running amok.
    There is no way I will install Windows without a valid need and hearing at least a couple of first hand user experiences

    I HAVE SPENT 1 HOUR TODAY AT THE APPLE SHOP ASKING THE GENIUS GUY - WHY ARE APPLE COMPUTERS IMMUNE TO VIRUS AND HOW DO I PROTECT MY PERSONAL INFORMATION FROM BEING INTERROGATED AND TRANSMITTED TO THE OUTSIDE WORLD.
    MY QUERY STEMS FROM EMAILS - IF THEY HAVE A PICTURE ATTACHED THE MACHINE WILL NOT OPEN THE PICTURES - THE MESSAGE SAYS TO PROTECT MY IDENTITY CLICK HERE IF YOU WISH TO DOWNLOAD. I HAVE TO MAKE A JUDGEMENT TO TRUST THE SITE WHICH SEEMS ODD AND SO WHEN I ALLOW THE DOWN - I DO WONDER WHAT IS GOING ON.
    I DO RUN A SEPARATE PC AND WHEN I DOWN LOAD THE MAILS ONTO THAT COMPUTER MY NORTON ENGAGES AND WARNS OF INFORMATION OF PRIVATE NATURE BEING ATTEMPTED TO BE TRANSMITTED - AT THAT STAGE I CAN STOP THE TRANSMISSION - ON THE MAC I HAVE NO MEANS - THE GENIUS GUY SAYS DON'T WORRY.
    HELP - CAN ANYONE TELL ME WHAT IS IT ABOUT MAC THAT WOULD SETTLE MY CONCERNS AND ALLOW ME TO DOWN LOAD IMAGES CONTAINED IN EMAIL WITHOUT WORRY OF THE COMPUTER BEING FRISKED FOR DATA AND IT BEING TRANSMITTED INTO THE OUTSIDE WORLD.

  • MOVED: Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

    This topic has been moved to Overclockers & Modding Corner.
    Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

    Im no pro but with your raid setup you need to stay with bios 3.0, 3.1 or 3.2.  I understand that 3.3 & 3.4 causes problems but the new 3.53 beta bios fixes the problems in 3.3 & 3.4.  See below:
    https://forum-en.msi.com/index.php?topic=80933.120
    Regarding your pcie clock, if you are using coolbits and nvidia drivers only (no MSI drivers at all), then I have used nvidia's ntune to help set the clock.  For my x1 msi 6600gt, working backwards from the bus speed optimization it equalled to 106...but I am really not good at this and you should post your question under the VGA portion of this forum for a better answer to that 1 question.
    However, using MSI's DOT works well too and its automated.
    Btw, the pcie setting has nothing to do with your cpu/memory overclock.

  • Looking for FULL SCREEN flash web gallery template

    Hi,
    I'm looking for a plugin for PS to make full screen flash gallery, something similar to this:
    http://www.paulvanroekel.nl/picasa/CoolFullScreendemo/index.html
    anyone know of any? free would also be good
    Cheers,
    TBK

    You don't need a plug-in – there are dozens of free web gallery generators out there.

  • Looking for Third Party SAP Data Migration Tools

    Hi all,
    I don't know if this is the right place but I was wondering if anyone can provide me a list or a link of the different third party SAP Data Migration Tools. I am specifically looking for productions that migrate data from one SAP system to another.
    Thanks and I hope to hear from you.
    Regards

    Hi,
    Just to weight out my options and compare the diffrent products as a research of sort.
    For SAP tools they use LSMW I believe but I want to check the alternatives.
    Regards

  • Looking for help-DVD with web/email links

    Hall writes...
    "[email protected] is actually quite limited and not entirely compatible with the range of DVD playback software/hardware available on a PC... you might be better off using eDVD from Sonic (which is PC software, making use of the Interactual Player, rather than @ccess)."
    I've no experience with Sonic yet but there is a small project in Chicago that needs help immediately. I'm looking for leads to pass on.
    [email protected]
    Thanks

    Well, there's the rub.
    If you use [email protected] then pretty much every Mac will run the software easily enough, but you have to install it on a PC and even then it doesn't work as it should in a lot of cases.
    If you use eDVD then PCs will almost certainly already have the player installed (since it is a far more ubiquitous piece of software than @ccess, and is used by a high number of commercial discs already in circulation), but you'll need to install the Interactual player on the Mac...
    There are probably going to be far less Mac users than PC users - which might indicate that you go for eDVD and a more PC friendly solution.
    But don't be fooled - eDVD is not the saviour that we all hope it will be. There are still issues on some PCs with it, and as you have already found, some issues on a Mac as well. The thing to consider is whether the eDVD solution gives more compatibility overall with your target users than [email protected] will.
    You could opt for a more simple solution and just place the documents that you want included into a ROM folder on the disc, then use a menu to explain what's there and how to get to it.
    The strong advantage here is that you'd have to create that menu anyway for those who view the disc in a set top player, and you are also not trying to post edit your files (as eDVD requires) or use software that simply isn't good enough on PCs (as @ccess seems to be).
    It may be a less elegant and less gimmicky option, but I'll bet hardly any of your users will know the difference anyway...

  • Looking for a good 3rd party reporting tool

    I'm looking for a tool that I can use that will provide easy to read call detail reports that can be either PDF or Excel formatted. Quite often I get asked to pull reports for detailed call records of an extension for the last 3 months and it's a pain to run the query and then spend time in Excel to format it in such a way that another manager can understand it.
    Anyone have any recommendations? Not looking for the high end, do it all type of software.
    Thanks
    JIm

    http://www.isi-info.com/solutions/CiscoCallAccounting.htm
    this is the software our vendor recommened to us, as the reporting tool built into Unity isnt that great
    http://www.syn-apps.com/products/software/
    Call-Reply might also be something you might b e intreasted in.

  • Looking for a specific photoshop font

    I'm looking for this font here: http://i89.photobucket.com/albums/k229/ohgoddammit/photoshopfontcopy.jpg
    Thanks in advance!

    Wow. I was gonna say go to http://www.myfonts.com/WhatTheFont/ too, but that's probably too small a source file for it. As John said, some of the users there may be able to help. Try Robert's suggestion as well.

  • Improving ASR9k resilience - Looking for feedback.

    Asking all our customers.  
    Looking for some other examples where we had an issues on the a9k where we might have some gap in system resiliency.  Looking for issues where we might have seen a HW or SW issue and the router didn't handle it in a way you would have preferred to allow network redundancy to take over.  Please provide as much information about the situation as you can.  As well as what behavior you believe should take place?  If you have SRs or bug IDs please include as well. 
    Here are some examples of the past that we have already addressed. 
    CSCuc04493 - Disable LC interfaces if online-diags reports datapath error
    This allows us to shutdown ports where datapath errors occur to allow network redundancy to kick in.
    CSCun00493 - Need recovery mechanism for Punt/FPGA CRC errors in RSP440 
    This has the RSP perform a failover or reload when it loses communication to the fabric.  
    Thanks,
    Bryan Garland 
    Bryan Garland  CCIE#1942
    Technical Leader, Engineering
    HERO BU- Deployment & Escalation

    Hi Bryan,
    I see the NP performance as an area for improvements. There are certain NP lock conditions where automatic action is taken to recover from this situation, but there is no such thing when it comes to an NP overload scenario. There are certain NP counters which indicate an NP performance overload, but it is cumbersome for the customers to monitor these values. So it would be nice to at least have logging entries if the NP is overloaded or the ability to have actions taken. A typical example would be netflow, which is intensive for the NP because it needs to create frame copies for netflow. There is a punt policer that protects the line card CPU, but with very low sampling rates and small packets at a high rate the NP might get overloaded, leading to intermitting packet loss (rare but possible).
    Cheers,
    Florian

  • Considering buying a 6D looking for feedback from someone who has one

    Looking for reviews of the Canon 6D from users of same

    I have t2i and bought 6d about two weeks ago.
    I'm still learning about 6d but 6d is better in every aspects.
    Worth for the money? Not sure.
    My t2i is good enough for my purpose.
    If I had no camera, I would buy t2(3,4,5)i over 6d(too much money).
    But I would pick 6d over 7d, if I have enough money.
    Again, 6d is very solid, powerful camera (for me) .

  • Looking for feedback for new monitoring and notification tool

    Hi we just released our cross platform Cluster and Systems Management tool for OS X. It runs natively and can generate reports and send notifications on many different services and system data.
    Please check it out. It should make any sysadmins life a lot easier: http://www.bixdata.com/

    Hi Dore,
    According to your description, I understand that you want to set Integrated Windows authentication(IWA) for internal client access, Forms-based authentication(FBA) for external client.
    If I misunderstand your concern, please do not hesitate to let me know.
    As you mentioned, we can create another virtual directory and configure different authentication with different website. More details about
    Configuring Multiple OWA/ECP Virtual Directories on Exchange 2010 Client Access Server, please refer to:
    http://blogs.technet.com/b/exchange/archive/2011/01/17/configuring-multiple-owa-ecp-virtual-directories-on-exchange-2010-client-access-server.aspx
    “Microsoft strongly recommends OWA and ECP virtual directories in the Default Web Site be configured for IWA, leaving the InternalURL as with the default (Server FQDN), making that site and virtual directory the target of proxy requests from other Active
    Directory sites or delegated connections from the firewall.
    Microsoft recommends creating the second OWA/ECP virtual directories in a new IIS web site with a different IP address, and using it for internal client access. By default the new virtual directories will be FBA-enabled, and have no internal or external
    URL values.”
    Best Regards,
    Allen Wang

  • Beginner looking for route to advanced web design

    Hi.  I'm an IBM web programmer.  I am very well versed in html, css, and javascript.  I have been using those three to develop for the web for about two years now.  Currently, I'm looking to start designing web sites with flash.  I don't really care about banners and other things yet.  I just want to get to the point where I can create great looking flash websites.  I am starting a subscription to lynda.com today and will be watching as many tutorials as possible.
    So far, I've figured out how to create an extremely basic website, but I want to go from that to things like BK design's website.  Will I need anything more than flash and photoshop for sites like this?  I currently have photoshop and flash CS3 versions.  How important is it that I upgrade to CS4?
    I'm a lot more experienced with photoshop.  So, things in flash like layers have been pretty easy to get used to.  I've used motion tweens and actionscript (which so far is very similar to javascript).  What are methods and strategies that I need to educate myself on to get to the advanced level of website design?

    Flex uses an XML based "language of convience" called mxml. Mxml translates to actionscript much like jscript translates to Java. A typically page consist of mxml with sections of actionscript.  Flex has no timeline and is more of a developers tool it's designed to integrate with well with middleware and has a larger set of components.  In some ways it's a lot like ASP.net.

  • Looking for a freeware image editing/creation tool.

    Hi I have been looking around everywhere online for a free small download programme or two I need to be able to open up images, resize them, edit them a little and save them but as either a jpeg, gif or png file - I haven't been able to find any that saves them as any of those file types.
    But if there is one something similar to photoshop like that would be good to create web layouts so i would need to be able to copy and paste images into a new image cut out sections and well you know what you need to be able to make web layouts.

    Seashore is opensource, and uses Cocoa. It doesn't have all those fancy filters and effects, but it's easy to use and quite a small download.
    http://seashore.sourceforge.net/
    Martin
    MacBook 2GHz 512MB, Powermac G4 2x500MHz 1GB   Mac OS X (10.4.7)  

  • Looking for WLS 7.x Web Services interoperability information

    Does anyone know of any published reports on compatibility when non-WLS clients
    access a WLS web service? I’m completing some tests with clients created using
    the Java Web Services Developers Pack but I’m more interested in how it also does
    with other vendor implementations (Microsoft, IBM, Apache). I’m also interested
    in whether WLS 6.x clients can access WLS 7.x web services. I haven’t seen BEA
    referenced very often on the interoperability sites. Has BEA published any information
    on their compatibility? Has anyone else published information on this?
    Thanks,
    Dave

    The server seems to be OK (tried intra and internet) ... yes it's normally up.
    Please try again and let me know of any further problems.
    Thanks,
    Bruce
    Dave wrote:
    Bruce,
    Thanks for the link but it looks like the server is down (connection timed out).
    Is the server normally up?
    Thanks,
    Dave
    Bruce Stephens <[email protected]> wrote:
    Hi Dave,
    I think you will find that the round 3 tests build on most of the work
    done in 1/2.
    Also, there are results listed on our interop server
    http://webservice.bea.com:7001/results/summary.html
    Thanks,
    Bruce
    Dave wrote:
    manoj,
    I looked at test results on Sun’s site and whitemesa. I only noticedBEA in round
    3. Can you point me to the other test results?
    Thanks,
    Dave
    "manoj cheenath" <[email protected]> wrote:
    BEA participate in the soapbuilder interop testing and WLS 7.0
    pass all of the round I, II and III interop tests defined by soap
    builders (with most vendors).
    Also, we have internal interop tests for .Net and AXIS.
    regards,
    -manoj
    "Dave" <[email protected]> wrote in message
    news:[email protected]..
    Does anyone know of any published reports on compatibility when
    non-WLS
    clients
    access a WLS web service? I'm completing some tests with clients
    created
    using
    the Java Web Services Developers Pack but I'm more interested in
    how
    it
    also does
    with other vendor implementations (Microsoft, IBM, Apache). I'm
    also
    interested
    in whether WLS 6.x clients can access WLS 7.x web services. I haven'tseen BEA
    referenced very often on the interoperability sites. Has BEA publishedany information
    on their compatibility? Has anyone else published information on
    this?
    Thanks,
    Dave

Maybe you are looking for

  • TS3297 I can't get into my iTunes store.  It goes so far then a message "itunes has stopped working" comes up.   Just started last week.

    When I try to get into my iTunes store it will go just so far then I get a message that says "iTunes has stopped working" and I cannot order any songs.  This has just starte over the last week and a half.  What is going on?

  • MB51/ME80FN/MB5S

    hi... urgent I want a monthly report in which MIRO and MIGO Documents no.s come. I want to track MIRO document no.s with the MIGO Document No.s for a month. The main purpose is to know out of how many GRNs (migo) done by store, MIRO has been done by

  • How to integrate with RMS system

    Hi experts,   I want to integrate RMS(Retail Management System) with SAP PI system. Is it possible to integrate? If possible, Can you give me Idea How to integrate with this? Thanks & Regards, Poonam.

  • Reg:BUISINESS SYSTEM

    Hi Experts, is it possible to create the newTS & business system for the r/3client(system)it has already TS & business system? please suggest to me

  • 2 separate itunes accounts for 1 ipod touch

    This is probably not complicated but here is my situation.... My daughter has an ipod touch and always asks me to add movies, games, etc. My ex wife decided that she wanted the itunes account shared with her account and since she won't give me the pa