Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Looking for Help with Hyperion to JAVA

I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

I guess I spoke too soon! I really can't believe this nightmare is not over yet! My account is still wrong. The credit that I was due totaled $63.00 I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72. I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible? None of the late fees were credited and the amount due for my monthly charges are wrong. Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20. The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money. I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change! I lost money once again due to the verizon rep's. so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account. Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end! I need real help!
>> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

One question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to

one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
TY

The History menu can only show that fixed maximum of 15 as that is hard coded.
Maybe this extension helps:
*History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/

Problem description: My MacBook Pro is running really slow. Applications won't open or take up to 10 min. EtreCheck version: 2.1.5 (108) Report generated December 27, 2014 at 9:15:58 PM CST Click the [Support] links for help with non-Apple products

Problem description:
My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
EtreCheck version: 2.1.5 (108)
Report generated December 27, 2014 at 9:15:58 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HD (disk1) / [Startup]: 498.88 GB (5.04 GB free) (Low!)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[running] com.seagate.TBDecorator.plist [Support]
5 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
[running] com.carbonite.launchd.carbonitestatus.plist [Support]
[loaded] com.coupons.coupond.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[loaded] com.trendmicro.itis.dca.plist [Support]
[running] com.trendmicro.itis.uimgmt.agent.plist [Support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Support]
[running] com.carbonite.launchd.carbonitedaemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.trendmicro.icore.av.plist [Support]
[running] com.trendmicro.icore.main.plist [Support]
[running] com.trendmicro.icore.wp.plist [Support]
[running] com.trendmicro.itis.plugin.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
[invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
[loaded] com.trendmicro.itis.uninstaller.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User internet Plug-ins: ℹ️
npBcsMcTcIO: Version: Unknown [Support]
Safari Extensions: ℹ️
Trend Micro Toolbar [Installed]
3rd Party Preference Panes: ℹ️
Carbonite [Support]
Flash Player [Support]
Paragon NTFS for Mac ® OS X [Support]
Seagate Dashboard for Mac OSX [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
HD: Disk size: 498.88 GB Disk used: 493.84 GB
Destinations:
Jens Seagate Backup [Local]
Total size: 999.86 GB
Total number of backups: 6
Oldest backup: 2014-06-24 10:33:56 +0000
Last backup: 2014-12-17 17:14:18 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 493.84 GB X 3)
My Passport for Mac [Local]
Total size: 2.00 TB
Total number of backups: 14
Oldest backup: 2013-08-21 19:19:35 +0000
Last backup: 2014-12-19 11:44:23 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
      6% coreaudiod
      5% CarboniteDaemon
      4% iMovie
      3% JustCloud
      3% Wondershare Player
Top Processes by Memory: ℹ️
335 MB iPhoto Library Manager
180 MB Finder
142 MB iMovie
70 MB Preview
51 MB Microsoft Word
Virtual Memory Information: ℹ️
149 MB Free RAM
1.04 GB Active RAM
897 MB Inactive RAM
1.17 GB Wired RAM
30.53 GB Page-ins
1.42 GB Page-outs
Diagnostics Information: ℹ️
Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
Dec 26, 2014, 02:22:01 PM Self test - passed
Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]

You have nearly run out of disk space. Either purchase a larger one or start cleaning out the one you have?

EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help.    I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      1% mds
      0% fontd
      0% mds_stores
      0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.

patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

HT201318 Need help with being double charged on my icloud account when purchasing extra storage for my ipad

Need help with being double charged on my icloud account when purchasing extra storage for my ipad?

I had this same problem on my 4S. I fixed it by restoring the phone to factory defaults. Previously, I had taken the additional step of restoring from backup but, as soon as I did, the problem returned. The fix is a hassle as I now have to reinstall my apps but at least I can manage mail on the phone.
The problem also occurred on my iPad2 but I'm not restoring it as it's a serious hassle (see above) and I don't actually read much mail on the device.
As a side note, I noticed incredibly high load averages (5+ processes for 1, 5, and 15 minutes; 12+ for 1 and 5 minutes at one point) as well as CPU usage that didn't drop below 15% (apparently all user processes, system seemed to be about normal). As could be expected, this also lead to incredibly rapid battery depletion.
I can't tell what processes were hogging the CPU as neither of my devices are jailbroken and Apple doesn't seem to like 'top' much.

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

Hi,
Edge role is design for perimeter networks, to keep security risks minimum. So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
Thanks.
MachPanel - Premium Cloud Automation Solution

New Mac user looking for help with Finder, Preview, Keyboard, & Dock

So about a month ago I switched over from a lifelong Windows user to a brand new MacBook Pro, and while I am adjusting pretty well, there are still some things that I haven't quite figured out.
First up on the list is Finder! I like my files to be arranged just like how they are in Windows Explorer--folders first alphabetically, then files alphabetically. I've managed to acquire this setting by messing around with the "clean up by" and "arrange by" functions but I don't really know the specific combination. Most of the time these preferences are saved and set as the defaults under "View Options" but every once in a while it resets and I have to tinker around with the settings all over again. Does anyone know of a way to fix this? It's only happened twice so far, but I'd rather not have it happen again. Also, occasionally when I delete an item, there is a blank space left where the icon was instead of all the files following it bumping up a space. Any quick fixes for this bug?
Next up is Preview. Again, I like the Windows Way and I like to be able to browse between the files in a folder while using Preview/Windows Photo Viewer. I know that there is a way to browse between files if you select the whole folder and stick it in Preview, but is there a way to achieve the same result without having to do that? An app or "extension" of some sort that adds arrows in to browse between photos? I've had no luck finding anything other than the aforementioned option. Is there a good free alternative to Preview that will function similarly with the browse between photos option?
One of my favorite things about my new Mac is the backlit keyboard function. My old laptop didn't have it and as someone who is online more often at night it is super helpful. But is there a way to turn it off during the day/in bright settings? A way to put it on a timer? In System Preferences I selected the option "Adjust keyboard brightness in low light", which I assumed to mean would have the keyboard NOT very bright when there IS light, but it continues to light up just the same. Any apps or extensions to help with this one?
And finally, the dock! This question is more about aesthetics than functionality but help is appreciated all the same. Currently, my dock looks like this: http://i42.tinypic.com/35ktxlz.png It is rather opaque and the indicator lights can barely be seen. However, in a lot of tutorial videos I've been watching, many people have docks that look like this: http://i.i.cbsi.com/cnwk.1d/i/tim/2011/07/19/Lion_LaunchPad.png It is a darker shade of gray, the divider is dashed rather than a straight line, and the indicator lights are clearly visible. Does anybody know how to get this look for the dock? I've looked in the dock preferences but there's not really anything in there other than magnification/size/effects.
That about sums things up! I'm sorry if any of these seem like "silly" questions but they are all things I have been unable to find answers for. Any and all tips, tricks, and help is appreciated! Thanks in advance for all your help!!

congratulations on coming over from the dark side.
Seems like you are interested in column view, which would show you the hierarchy of folders and files: Column View in Mac OS X Mountain Lion - For Dummies Not sure what's going on if your finder settings don't stay put. May be a corrupted preferences file, which is easy to fix, but is perhaps a topic for another discussion.
What I'd suggest is to have an open mind and try to see what the mac can do, rather than force it to look like your windows machine. I mean, if you just want it to look like windows, then why bother switching? If you give it a little time, you'll start to appreciate the mac way of doing things, and see how it is infinitely more awesome, powerful, creative, intuitive, and better designed (and the software way better written) than what you left behind. But that's your call.
There are some threads on this forum with complaints about the backlight. Keyboard backlight settings query...: Apple Support Communities Evidently it depends on the angle of the screen and the light sensor relative to the light. Some suggest that a SMC reset may help: Intel-based Macs: Resetting the System Management Controller (SMC) This is not an issue for me, I just adjust the brightness with the keyboard buttons if I want. Real men shift their own gears, drink their coffee black, and adjust their own keyboard brightness. I am not aware of any software to exert more control over this feature but a search of macupdate Download Apple Mac Software & iPhone Software : MacUpdate may help. I mean, it's up to you what is important. I can waste a lot of time playing around with the GUI and with unnecessary software, or I can just get my work (and play) done.
You might prefer the no-glass dock, that removes the shelf, and makes the indicator lights like more discrete orbs. You can do this with the terminal. Using the terminal is also, perhaps, a topic for another discussion.I like the 2D dock much better. If you want I'll give you some directions for how to do it. Otherwise, here's a reference: 2D Dock - MacRumors Forums

Hello to all ... looking for help with 7520

Hey I got a 7520 and want to know how I can get my computer to sync ?? or recognize my phone so I can load Pictures from the computer to the phone.

Hey BigSteve!
Here is a write up that should help you:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Looking for help with movie loading in a different spot every time page reloads.

Hello,
I have a Flash movie that I need to jump to a one of 6 chosen frames when say a user hits the back button or home in the site. I just dont want the same user seeing the flash movie replay in the same spot everytime they go back to home.
ANY help with this is appreciated.
Thanks ahead of time.
-Ann
Here is what I have scripted:
var numbers:Array = [2,114,415,687,960,1195,1485];
_root.firstTime = true;
if(firstTime) {
    firstTime = false;
    var frame:Number = Math.floor(Math.random() * numbers.Length);
    gotoAndPlay(numbers[frame]);
I have also tried this:
Array.prototype.shuffle = function() {
for (var ivar = this.length-1; ivar>=0; ivar--) {
var p = random(ivar+1);
var t = this[ivar];
this[ivar] = this[p];
this[p] = t;
ASSetPropFlags(Array.prototype, ["shuffle"], 1, 1);
var Array_ar:Array = new Array(2,114,415,687,960,1195,1485);
Array_ar.shuffle();
index = 0;
function load_random() {
gotoAndPlay(Array_ar[index++]);
if (index == Array_ar.length) {
(index=0);
load_random();
But this keep jumping to frame 1 each time i hit back or refresh.
Thanks again.

That did not work. It loops back to the frame that it first loaded to not to frame 1 the beginning.
It tried putting gotoAndPlay(numbers[frame]); on the very last frame, then I made a new keyframe after the very last frame and neither worked.
You can see the swf here:
http://www.shared-vision.net/testsites/edi/EDIflashtest2.html
Thank you for your help.
-Ann

Mail.app - Applescript - Looking for help with my 1st Applescript

Okay… so I am taking the plunge. I've finally found something that is bugging me enough that I want to make a script to resolve it.
*Here's the situation:*
I use Smart Mailboxes a lot. It's my primary window into dealing with email.
I use MailTags (an addon for Mail) to apply keywords to messages, via Mail Act-On rules (an addon by the same company).
I use Smart Mailboxes to show me messages with various keywords etc.
What I have found is that Smart Mailboxes do NOT automatically update themselves. For instance, when a message in the Smart Mailbox is changed in such a way that the filter on that mailbox should not display it, the message will still sit there until I either leave the mailbox and return, or hit Rebuil in the Mailbox menu.
The same applies for when new mail comes into my Inbox. If there is new mail that qualifies for inclusion in the smart mailbox I am currently viewing, it will not appear until I do one of the above two things.
What I discovered was this script:
tell application "Mail" to activate
tell application "System Events"
click menu item "Rebuild" in menu ¬
"Mailbox" in menu bar 1 of process "Mail"
end tell
This is what got me thinking about scripting a solution.
The other option is to assign a keyboard shortcut to the Rebuild command. But I would like the Rebuild to take place automatically when I apply certain rules to messages. I want my Mail Act-on rule to trigger the a Rebuild. I figure I can do this by having it trigger the Rebuild script shown above.
*HERE IS MY QUESTION:*
Is there a way to have the script check what the currently active/selected Mailbox is? Or, put another way, can I get it to NOT run if certain mailboxes are selected?
Here's what I am thinking.
Under no circumstances do I want this script to be triggered if the current mailbox is NOT a smart mailbox, and IS any of my IMAP mailboxes… most especially the Inboxes. That would trigger a complete cleaning out and rebuilding of the entire IMAP inbox, which has many gigs of mail in it.
What I am trying to figure out, and would love some help with, is how I can make sure this script ONLY runs when the current mailbox is either ANY smart mailbox, or NOT an IMAP mailbox, or some other logic that keeps it from running in an IMAP mailbox.
Any tips are greatly appreciated.
With thanks,
Jonathan
Message was edited by: InspiredLife
Message was edited by: InspiredLife

Thanks Camalot,
I appreciate your help with this. I am also enjoying learning more about AppleScript. It seems much easier that other scripting languages, if for no other reason that it uses basic english logic and words.
When I run your script with an inbox selected, I get the following Result:
tell application "Mail"
get selected mailboxes of message viewer 1
--> {mailbox "INBOX" of account "JE Gmail"}
end tell
Result:
{mailbox "INBOX" of account "JE Gmail" of application "Mail"}
When I run it with a smart mailbox selected the following is produced:
tell application "Mail"
get selected mailboxes of message viewer 1
--> {current application}
end tell
Result:
{application "Mail"}
So get the impression it's not throwing up an error. Certainly, either way it does not run what I put into the On Error section, which was simply
display dialog "Success"
Is this useful? Can I test if the output contains the word "INBOX" ?
I notice that if I have, for instance, a SENT folder select, it gives the following result:
Result:
{mailbox "INBOX/Sent Messages" of account "[email protected]" of application "Mail"}
Which again has the word INBOX in there. Drafts comes up a little different.
Result:
{mailbox "Drafts ([email protected])" of application "Mail"}
So if there was a way to parse the result through a test against "INBOX" "DRAFT" etc then this might work. What do you think?
I have no idea how to go about that though, so your input would be very helpful.
Thanks,
Jonathan

Help with Class-map configuration - ZBFW

Hello,
I need some clarification regarding the class-map configuration in a ZBFW. I need to allow https,http,ftp & rdp traffic from Internet to few of the servers inside our LAN. So I put the below configuration to accomplish the task (example shows class-map for only https protocol) :
a.)
class-map type inspect match-all HTTPS-ACCESS
match protocol https
match access-group name HTTPS-SERVER-ACCESS
ip access-list extended HTTPS-SERVER-ACCESS
permit tcp any host 172.17.0.55 eq 443
permit tcp any host 172.17.0.56 eq 443
permit tcp any host 172.17.0.36 eq 443
permit tcp any host 172.17.0.45 eq 443
permit tcp any host 172.17.0.60 eq 443
Where 55,56,36,45,60 are the servers inside the LAN (12 more servers are there) that need to be accessed via https,http,ftp & rdp from Internet.
Is it a correct approach? or do I need to change my configuation so that I have to match ACL with my class-map like below:
b.)
ip access-list extended OUTSIDE-TO-INSIDE-ACL
permit tcp any host 172.17.0.55 eq 443
permit tcp any host 172.17.0.55 eq www
permit tcp any host 172.17.0.55 eq 21
permit tcp any host 172.17.0.55 eq 3389
permit tcp any host 172.17.0.56 eq 443
permit tcp any host 172.17.0.56 eq www
permit tcp any host 172.17.0.56 eq 21
permit tcp any host 172.17.0.56 eq 3389
permit tcp any host 172.17.0.36 eq 443
permit tcp any host 172.17.0.36 eq www
permit tcp any host 172.17.0.36 eq 21
permit tcp any host 172.17.0.36 eq 3389
permit tcp any host 172.17.0.45 eq 443
permit tcp any host 172.17.0.45 eq www
permit tcp any host 172.17.0.45 eq 21
permit tcp any host 172.17.0.45 eq 3389
class-map type inspect match-all OUT-IN-CLASS
match access-group name OUTSIDE-TO-INSIDE-ACL
Which one is the correct approach when we consider the performance of the firewall ? Please help me.
Regards,
Yadhu

Hey
I do not agree with Varun, I think the first approach is the best one.
Why? Because when you issue the "match protocol ..." you are usig NBAR wich is an application inspection software, which means that https or whatever protocol is inspected at layer 7, not layer 3 and 4 which the seconds approach does (IP and port-number).
Lets say you use the second approach and an attacker uses some malicious protocol that runs over port 443 or whatever (a port that you opened). That attack would be successfull because all you say, you are going to IP-address 172.17.0.56 over port 443 so go ahead.
But if you are using NBAR, this would not work because NBAR will look at layer 7, inside the protocol itself and look if this really is HTTPS (or whatever protocol).
That's my two cents. Hope it helped!

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Similar Messages

Maybe you are looking for