Looking for HP dm4-1265dx replacemen​t lid

where can i find a replacement lid for my HP dm4-1265dx laptop? dropped my laptop and the top is totally broken and detached from the base.

Do you just need the plastic back panel behind the screen or the whole display assembly, hinges and all?
Here is the Manual:
Service Manual
See page 25. The whole kit and kaboodle is seven (7) separate parts. The "lid" as I would call it is 
Display back cover 608208-001
That one part is $115 from HP:
http://h20141.www2.hp.com/Hpparts/Search_Results.a​spx?mscssid=8CED56BF356D43848D0C083DC32AA087&Searc​...
Not a lot cheaper on eBay:
http://www.ebay.com/itm/New-Genuine-HP-Pavilion-DM​4-1000-2000-3000-Series-LCD-back-cover-636936-001-​...
If this is "the Answer" please click "Accept as Solution" to help others find it. 

Similar Messages

  • Looking for an lcd replacemen​t screen. Not sure which one is needed.

    Hello, first time on this forum so I apologize if this is the wrong place to post this. I recently received a Toshiba Satellite with a broken lcd screen, first time I've ever worked on a laptop. Removed the screen without a hitch but I am not sure exactly which monitor I can replace it with. I have taken photos of the model and other numbers. 
    I'm not sure if 2 or 3 different screens can fit into the same laptop or you need the exact screen.
    Posting pics below of the numbers of the back on the lcd screen. Looking for an exact replacement or something that will work in its place for sure.
    A hearty thank you to anyone who takes the time to help! :]
    Edit: Spelling.
    Solved!
    Go to Solution.
    Attachments:
    1.jpg ‏101 KB
    2.jpg ‏97 KB
    3.jpg ‏84 KB

    Satellite A505-S6960 (PSAP0U-007007)
    Stick with part number V000180100.
    -Jerry

  • Looking for an IOTech SCSI488 (or replacemen​t)

    Greetings, all! I am looking for an IOTech SCSI488, which IOTech no longer
    manufacturers, or a replacement for it. I apologize to those of you who see
    this as an inappropriate use of this newsgroup, yet my need is real and
    somewhat urgent. (By the way, I have asked ebay to set up an engineering
    and technical equipment category.) Thank you for your time and attention,
    and for any help you can provide!
    Douglas A. Femec, Software Engineer, Viewpoint Software Solutions, Inc.
    2320 Brighton-Henrietta Townline Road, Rochester, NY 14623
    (716) 475-9559, ext. 18 (voice); (716) 475-9645 (fax)
    [email protected]; www.ViewpointUSA.com

    try this: https://gist.github.com/4461250

  • Looking for a Hard Case/Shell for my new Retina MacBook Pro 15"?

    I am looking to buy a shell/case for my rMBP (October 2013) it hasn't arrived yet, but obviously I want it to be protected asap.
    I don't know what the model number is, but it is the lower spec 15" Retina MacBook Pro that I have purchased. How can I make sure that a case I buy will fit?
    Will any 15" rMBP case fit, or has the size changed for this upgrade?
    I am looking for either a black/clear, shell/case that will attach to the back of the lid to protect it. I am looking on eBay at the moment, as I have a voucher to spend on there anyway. Can someone recommend a shop/seller or a particular product?
    I am in the UK, so I would obviously prefer to buy from a local seller.
    Thanks!

    I purchased the Hardshell Case for 13-inch MacBook. It offers a durable hardcase construction that securely covers your notebook. It provides a frosted hardshell exterior, soft-touch coating, raised rubber feet, thermal vents, and trouble-free access to all features.
    Features
    Excellent notebook protection
    Exterior rubberized soft-touch coating
    Precise cut-outs for access to magnetic power cable, headphone and microphone input jacks, CD-ROM drive, battery level check button, and all side ports
    Vents and rubber feet elevate notebook from surface, allowing notebook's internal fans to circulate air more freely
    Simple to use and easy to clean
    I really love it. My friend has dropped their macbook (the case was on) on the concrete and nothing happened to the computer.
    Hope this helps you.

  • Changing Sort Order in Smart Album when Looking for Roll Name=Corruption

    We've confirmed via testing and from new posters that changing the sort order in a Smart Album who's criteria is to look for a roll name will cause iPhoto to crash and then crash upon launch after that.
    So to avoid corrupting your library do not change the sort order of a Smart Album designed to locate rolls.
    The thread discussing this is:
    IPhoto keeps on crashing, cannot use it
    Rebuilding the library with iPhoto Library Manager recovered the library. However, I don't know if a rebuild via the Control+Option key will do the same.
    G5 Dual Core 2GHz, 2G RAM, 22 Display, 250G HD, 200G FW HD, QT 7.0.4P   Mac OS X (10.4.6)   Canon S400, i850 & LIDE 50, Epson R200, 2G Nano

    Ha! I upgraded to iPhoto 6.0.3 and opened the dummy library I had created. (This was the library where the crash on launch kept happening because I had a smart folder looking for rolls and sorted by title or something else other than the default.)
    Guess what, it opened just fine! 6.0.3 fixes the crash. Not sure how much it helps people who started new libraries, but at least others won't run into this.

  • Looking for an docking station for DV9205us that has power pass-thru

    I have an HP DV9205us and am looking for a docking station that has a power pass-thru.  The power plug on my latop doen't always power up the laptop and this has gotten on my nerves.  Is the ES631AA#ABA the only docking station that works with the DV9205us

    Thanks for the link.
    Hadn't seen that review, but it matches what I conclude about that particular model - there's still lots of connecting & disconnecting to do. It has only one USB port docked, and another one sitting up top.  I have many items I'll be attaching via USB, such as Wacom, backup drive, external drive for photos, mouse.  And would prefer a Powered version so I don't have to connect the power cord each time either.  And if you notice that video, he shpws his desktop consisting on nothing but a keyboard & a monitor.  So with the lid closed on the MBA, how's he move the cursor around?  Missing a mouse there. (Yes - he could have a wirelesss mouse, but personally, I find a wired mouse much better - but he has NONE.
    Hoping to find someone who has actually used one.
    From my research, it seems the Landing Zone MAY do what I want, but I can't get answers from them to questions.  They have units for 2012 - 2013 MBA's, but I don't see anything on their site about the 2014 model I have.
    And there's a few other brands out there - but seeking real life experiences.

  • Looking for a Photo Album or Photo Management Software

    Does anyone know of any good software that I could use like a photo album, something like iView Media (which I have) but maybe a little more visually appealing. I'm not looking for anything to host pics online; I just want something that lets me break down my pictures by year...and then sub-folders for each year so I can have all different subjects. I haven't been able to find anything no matter how much I've googled...THANKS!!

    Medic2872P:
    Welcome to the Apple Discussions. As TD mentioned you can use iPhoto in the alias mode but you take on some additional responsibilities. When you delete a photo from the iPhoto library you do not delete it from the HD. That must be done manually from the Finder. It can be pretty easy to do that before deleting from iPhoto by Control-clicking on the thumbnail and selecting Show Original in the contextual menu. You'll be taken to the folder where the source file is located where you can delete it manually. Then delete it from iPhoto.
    Secondly, you won't be able to add photos to existing source folder and have them imported into iPhoto automatically. So it's best to put each new import in their own folder and import that way. Also you should not rename or move a source file once it's been imported into iPhoto.
    If you're interested in checking it out more thoroughly, read Tutorial No. 2.
    If do decide on converting to an alias based library and want to preserve your keywords from the library, Tutorial #1 would be of help. You can follow #1 and then move the photos from the Originals sub folders into your other folders in the Pictures folder and replace the old files with the keyworded files. Next remove the old Library folder to the desktop, create a new library and set iPhoto's Advanced preferences to not copy file when importing. Then import your "source" folder into the new library and you're back in business.
    But you should remember the caveats I've mentioned. If you're careful you can operate as you'd like.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM;   Mac OS X (10.4.9)   22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

  • Finder crashes when "looking for networks" - workaround that helps

    I've read through most of the messages about finder crashes, but what's going on in my case I haven't seen. As I have a work around, I thought I should post.
    If for whatever reason the wireless connection pauses or gets interrupted (for example, by closing the lid), the finder hangs in the process of "looking for networks."  Most of the time I can still pull up the dock -- the spinning beach ball only clicks in if I mouse over the top menu bar. Sometimes (but not always) I can quit open applications through the dock before I have to do a hard reset.
    My workaround is this: I turn wi-fi off before I close the lid. When I open the lid, I wait a short time -- 30 seconds, about -- and turn the wireless back on, and this way I can avoid the finder crashing.  If the wi-fi pauses for some other external reason, when "looking for networks" starts up, the finder will hang again.
    It's way past  time that Apple coughs up a permanent fix, but this might help somebody who's having the same problem.  And maybe somebody has a better workaround, in which case, I'd love to hear about it.

    Fire_Bird wrote:
    1. Going into a folder on my external hard drive that contains the installer for divx for mac.
    Divx has been a source of problems with both Tiger & Leopard. See for example Mac OS X 10.5: Finder may not fully "load". If you have installed it, it is probably at least part of your problem.
    then i erased the whole thing, and used the Mac OS X 10.5 install DVD that came with my mom's iMac (still happens)
    This is not recommended. The install disks that come with specific Mac models do not necessarily install the same things or do all the error checks that the retail Leopard installer disk does. (It is also a violation of the software license to install it on another Mac.) If you want a trouble-free, supported installation of Leopard, use only the retail installer or a disk specifically intended for your exact Mac model.

  • Looking for suggestions on alternate printing services

    I ordered my first two iPhoto books from Apple last month. Processing was quick and the physical quality was as advertised, however the photo print quality was lower than I had expected and I think the price is a little high overall.
    I'm wondering what printers others have used successfully from iPhoto. I'd prefer to have it printed locally so I can work with the printer face-to-face, but online ordering is no problem (and more of what I'm expecting to get here). Since I can make a PDF of the completed book it should just be a matter of finding a print shop that'll make a book from PDF. Any suggestions, good or bad? Thanks.
    iBook G4 1.2GHz   Mac OS X (10.4.8)  

    rdfisher:
    Welcome to the Apple Discussions. If you're looking for large sized prints I just got back a 20"x30" collage from Large Format Posters that I put together with Photoshop and OmniGraffle and it was outstanding in color and sharpness. They required the file to be converted to CMYK which told me they were using high end printers. I did the conversion on composite file and uploaded it to their site (77MB). I am extremely happy with it. They print from 11x 17 on up. That's the only experience with online printing I've had.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, QT 7.1.3,   Mac OS X (10.4.8)   22 LCD, 250G/200G/160G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod

  • Movie rentals that I downloaded onto iMac with Lion to do not show up on ATV 2 in menu for computers.  Purchased movies show up just fine.  What to do or look for?

    I have an imac that is running lion and an Apple TV generation 2.  I have rented a movie from itunes and it shows up on my imac in Itunes under a rental icon, and will play fine on my computer.  However, it does not show up as choice to play on my apple tv.  I have homesharing enabled and everything else works fine including purchased movies that are on my imac, but no where does it show rental movies. 
    What do I look for?  What do I do to play the rental movie on my apple tv 2?

    Answer to my own question:
    Wait until the downloaded rental has completed its download to the imac.  This took a long time for me, since it was part of several things that I was downloading at the same time.
    Finally, it showed up on my apple tv.   Interestingly, I was able to watch much of the movie on my iMac before the movie finished its download and was available to the ATV 2.

  • Need help to open and look for file by name

    Hi,
            Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
    How can i look for the file by his name ?
    Thx =)

    Hi ,
        Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
    The user ll type the serial that he wants delete ...
    I already figured out what i need guys .. thx for the help ^^
    I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
    Thx ^^

  • Looking for a Darknet/Secure BBS app

    I have been a fan of Haxial KDX for the longest time, but due to the bugs, etc., I would like to move on.  I'm looking for a secure darknet/bbs styled program that supports chat, filesharing, and of basic user management (who can login, who can't, etc..).  I have been asking this question all over the web, and haven't gotten (or found) a single response.  Waste has never worked right for me, by the way.  I would definitely prefer it to be open source, which is why I thought it best to post here.  Please help out, or at least direct me somewhere where I should ask... Thanks.
    As an aside, the guy who wrote KDX and Hotline (Adam?? Hinckley) claimed on the Haxial website that he is willing to sell the project.  I wouldn't mine purchasing and restarting the KDX Project, but I've been unable to get in contact with him.  So...if you are him, or know him, or own the rights to Haxial KDX and all related projects...$$$$$
    Last edited by xen0blade (2010-01-12 13:18:15)

    I've recently become a big fan of OneSwarm - http://oneswarm.cs.washington.edu - I like that it supports remote access.
    But I'm definitely interested to see what this thread brings up!
    Last edited by hAyZe (2010-01-11 20:50:45)

  • Looking for a simple, standalone desktop app for web stats

    Well, I see they've changed the forums here again. SIGH.
    Anyway, a certain web host has eliminated AWStats from it's shared hosting. So I used Webmaster Tools. And now they've changed, and no longer display the simple visitors and hits. Google Analytics is way too complex for what I need, as are many of the stats programs I've looked into.
    I can download the daily Apache log files, that's no problem. Just looking for a small standalone program to import these and show the data like AWStats.  Any suggestions? The only other options would be to go to a different web host. Not a big deal overall, but I would rather not deal with the hassle, especially the migrating the database.

    Not sure of standalone 'desktop' apps. But check out http://www.openwebanalytics.com/ and Web Analytics in Real Time | Clicky  - they're both very intuitive and easy to use with a lot more simplified stats than Google Analytics.

  • Looking for Video playback app, like a DDR

    Hello, I'm looking for a program to cue up and playback quicktime files for live broadcast off of the computers hard drive. Kind of like a DDR but all running on the computer. It needs to have the ability to cue up files based on keystrokes, like 123 enter = playack of 123, and be pretty quick about it.
    I found Playbackpro.... at WWW.DTVideolabs.com but I'm looking for some other options.
    Thank you.

    Unfortuately I cant load the clips into quicktime since it's crashing when I load them..
    Just hoping for a light weight app that's sole function is video file inspection

  • Looking for a real photo editing app.

    I'm looking for something that can precisely resize and crop. None of this slider bullcrap where you can't get pixel level precision. I'd like to be able to crop at exactly 640x960 for example, or resize to exactly 820x620, etc.. Something that can do non destructive edits and that can save a jpeg without compressing it so much that image quality is noticably less. Photogene2 is great (nice edit features and good quality saves) but it can't crop or resize exactly by the pixel. Phototoaster is great (nice edit features and non destructive edits) except it can't crop and resize by the pixel. How hard would it be to provide numerical inputs for crops and resizes? Is there anything out there really worth buying that can do these essential tasks?

    Photoshop Touch
    https://itunes.apple.com/sg/app/adobe-photoshop-touch/id495716481?mt=8&ls=1

Maybe you are looking for