Looking for Integrated Development Environment

I am new to Mac programming and was wondering if anyone could recommend a good IDE (Integrated Development Environment)? I tried downloading a version of XCode but it works only for OS 10.4 and I am using 10.3.9. Also, I ordered the book "Beginning Mac OSX Programming" by Trent and McCormack. Is it a good book to start with, or did I waste my money? Thanks in advance.

I have that book and I've found it useful. It provides a basic introduction to Xcode and a number of the languages available. However, if you want to learn a particular language, then you may need a language-specific book.
Have you any particular language in mind that you are wanting to learn/use?
Also, is there any reason for not upgrading to 10.4.9 (which is the latest version of the OS)? At least with the latest release, you will have many bugs fixed and the current discussions will all relate to any new ones.
Susan

Similar Messages

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

Adobe Muse a IDE(Integrated development environment) or a CMS(Content management system)...

Hi guys , I wanted to know if Adobe Muse is a IDE(Integrated development environment) or is it a CMS(Content management system)...
Fast responses will be highly appreciated...
Thanks in advance...

Hello
Adobe Muse is not a CMS, but you can publish adobe Muse site on Business catalyst, and Business catalyst is a CMS. You can integrate BC CMS features on your Muse site.
Please check this video for Muse: Advanced CMS Integration | Adobe Muse Feature Tour | Adobe TV
Also watch this video for adding BC features to Muse site http://tv.adobe.com/watch/learn-business-catalyst/adding-business-catalyst-features-to-you r-muse-sites/
Hope this helps !
Regards,
Prateek

Using Acrobat SDK for Unix development environment

Hi,
Can it be possible for me to use Acrobat SDK for Unix development environment as a server application??If yes, what are the things that should be installed on the client side to make sure that the client should be able see the produced PDF files?? Kindly help me in this regard..
Deepak

lAnubisl wrote:
My customer's solution has several issues generating PDF files and we are looking at the Acrobat SDK as at the instance of the final truth.
I use Interop.Acrobat.dll as a .NET project reference to open and resave PDF documents. I'd like to do all things I mentioned above.
After years and years, I have concluded that if you do serious PDF development, you need a set of libraries. For instance, if you are doing typesetting type of work ("vertical center", "horizontal center", "margin", etc., etc) , there is an excellent library from a guy in Germany (land of Johannes Gutenberg and printing presses)...
... which turned out to be useless in my next project which dealt with AcroForms.
I know exactly what you mean by "the final truth", sometimes I wish Adobe had some sort of official validating tool (like XML does).
Per your comments, I would recommend you to consider this library. It is available in all languages and its output is the same quality as Adobe's or at least in the same league:
http://www.pdftron.com/pdfnet/index.html
If you want to comment further, we must go to a different forum, since we are not supposed to discuss any non-Adobe products here.

Creating a IDE(Integrated Development Environment)

What I want its a way to create a IDE(Integrated Development Environment). I type a word (example:typed private from JAVA code) and this word became a color word.
What is the best way to do this?
PS:sorry for my spell, I�m from Brazil.

Abadacus,
See www.jext.org--it has a free java IDE, with source code, much of it from JEdit, another free java editor.
--A

I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
Loïc

Accordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit

Looking for a developer to build a custom AI plug-in

My apologies if posting about freelance development opportunities is not cool. I didn't see anything that said I couldn't :-)
Looking for a developer to help us develop a custom AI CC plug-in for Mac/Win that helps with some custom AI workflows. I have a detailed 6 page product specification including interface designs.
Please let me know if you are interested in helping. It is of course a paid opportunity.
jmcminn [**at**] yahoo.com

I would suggest our Adobe Connect partners:
RefinedData - www.refineddata.com
Terry Shane
RefinedData has their TalkingStick Pod that can easily be customized to do lots of things not advertised
Vidyo - www.vidyo.com
Vidyo has in beta their Telepresense HD Video Pod for Adobe Connect for release end of the year
Both of these excellent partners know Connect very well and can help. I'd start with RefinedData. Tell them I referred you.
Heyward Drummond
Adobe

How to setup JDeveloper 9.0.4.0 for iStore development environment?

I am new to iStore and JDeveloper.
I want to use JDeveloper as a development environment for making the UI customizations to iStore. Unfortunately the only documentation I could find is dated April 2002 for JDeveloper 3.2.3.
Has anyone been able to configure JDeveloper 9.0.4.0 as the development environment for iStore (eBusiness suite) 11.5.10? I want to be able to run/test the JSPs locally before deploying onto the development server, but cannot find documentation on how to do it for the latests releases of iStore/JDeveloper.
Thanks.

You need to download and install the OA Framwork Extension (patch 4045639 for windows).
Have a look at the Metalink Note:275880.1 (OA Framework 11.5.10 Doc Roadmap), this gives more details.
Hope this helps.
Thanks

Disk Space for PSoft Development Environment?

Can anyone tell me the approximate amount of disk space needed for an HRMS PSoft Development Environment?
I'm looking to create a standalone environment on one computer (no separate server), and am looking for sizing of HRMS application (8.9 or 9.0) + demo database + Oracle database + PTools + app server + web server + db server + process scheduler + PeopleBooks.
I know there are other issues, e.g. supported OS and how to get this set up, but right now I just need sizing for the basics above (have I forgotten anything?).
Thanks.
Mike

You should check your mailbox.
And also Re: Install PeopleSoft (PeopleTools 8.49, FIN) on 40GB laptop?!.
Nicolas.

Typical Repository setup for multiple developer environment.

I'm having trouble finding documentation on setting up a
development environment for several developers using Repository.
I currently have a Global Shared Workarea set up with some
Forms .fmb files that I would like to share. What method should
the developer who wants to work on one of these files use to
perform a check out of the file? When a file is checked out, is
it moved to a Private Workarea or is it downloaded to the
developers hard drive? Within Forms Builder there is a check out
option under File->Administration, but as far as I can tell,
there is no way to browse the Repository to find the file that
needs to be worked on. I'm able to use the Repository Object
Navigator to locate the file, but when I check it out I'm not
sure how to work on it within Forms Builder. Do I need to
download the file to my hard drive, or is Forms Builder able to
work on the file within the Repository?

Tom,
Nice set of questions.
I suggest you allow each developer to create their own workarea,
these will be private, until they are shared to other developers.
For a simple environment the workarea rule will be latest(main).
Check your fmb files into the Repository, they will then appear
in any workarea that has the rule latest on main. You will also
need to make the folder they reside in available to public, or
grant access to individual users.
Each developer should map the folder to a particular clientside
directory. I suggest you apply some standards across development
machines to avoid confusion. A mapping to d:\forms would be
ideal. On checkout of an fmb it will be synchronized with the
local file system. The form can then be opened from he Forms
Builder. You are correct that there is no For Builder Repository
browser, you must use the RON. Once the form is open in the
Forms Builder it may be checked in and out. You will need to go
back to the RON to perform diff/merge and dependency analysis.
I suggest you ask 2 developers to work on the same fmb and see
how the repository handles this. Try merging fmb files,
hopefully you will be pleasantly surprised.
Note that to add files to a checked in folder you must check it
out. To make the changes available to other workareas you must
check the folder back in.
Have a look at the commandline tool. We use a lot of scripts to
assist setup and build releases.
regards
David

Looking for a Developer

I'm looking for someone to team up with who knows how to code applications in Mac OS X or open source. I have an idea that I want to develop for an app that I believe can be very marketable to specific professionals. There is a need and I don't see an app that fills this need yet. The Apple community is growing for this specific user group and this idea could be the right time to develop this application. I will provide the idea and structure - you help me develop the interface and put into source code.
Contact me and we can discuss.

Hello,
it all depends on what you want... you can want a powerful heavyside client (=> a Java application), you can want a lightweight client relying on WebServices (=> MDS), you can want no client at all, a simply a productivity webpage (=> Browser development).
http://na.blackberry.com/eng/developers/started/tools.jsp
There is even a video that managers can understand that explains the differences between the three (but I can't find it and I'm in a hurry).
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Where's the best place to find Quartz Composer experts? (looking for a developer)

I'm looking for a Quartz Composer developer who is 1) interested in working with an artist and 2) can give me a quote for a specific project I am developing.

Apple hosts a bunch of mailing lists, one of which is for Quartz Composer devs. I read the list occasionally but have never really had the time to become proficient with QC.
Start here for general info about Apple's mailing lists: http://lists.apple.com/
Then click the "Lists hosted on this site" link to see all the various lists. You'll have to subscribe to quartzcomposer-dev in order to post your questions to the list.
The list is intended for technical discussions related to development and not really for job solicitation. But the usual folks on the list seem relatively friendly for the most part so I expect if you asked nicely and took any negotiations off-line that you wouldn't receive any flak.
Steve

Looking for team development best practices

We are new to Flex and have a team of five developers with
JEE background. My question is how to best organize a flex project,
so it's efficient for everyone to work together. Coming from
typical JEE Web application development, it's quite straightforward
to break up features into separate Java classes and JSP pages. It
reduces chances of multiple people working on the same file and the
merging hassle. I am looking for best practices for breaking up
flex code especially for MXML, so it is easy for a team of
developers to work on the project.

We are new to Flex and have a team of five developers with
JEE background. My question is how to best organize a flex project,
so it's efficient for everyone to work together. Coming from
typical JEE Web application development, it's quite straightforward
to break up features into separate Java classes and JSP pages. It
reduces chances of multiple people working on the same file and the
merging hassle. I am looking for best practices for breaking up
flex code especially for MXML, so it is easy for a team of
developers to work on the project.

ECC 6.0 Webdynpro for ABAP development environment

Hello,
We are currently running ECC 5.0 and ABAP stack is only available as of ECC 6.0. Is is possible to download and install just ECC 6.0 development environment?
Thanks,
Alex

The ABAP development environement and runtime are integrated into the Business Suite release. Therefore ECC 5.0 runs on top of NetWeaver 2004 (6.40) and ECC 6.0 runs on top of NetWeaver 7.0. There is no way to directly mix ECC/NetWeaver releases nor can you directly transport NetWeaver 7.0 objects (like Web Dynpro ABAP) to a 6.40 based system since the runtime wouldn't be present.
You can however install a standalone NetWeaver Systems. Then you would have a separate instance with the ABAP 7.0 developement and runtime environement. You can use RFCs and Web Service Calls from this standalone system to read and write data to/from your ECC 5.0 system. You give up some of the benefits (like the integrated DDic value-help).

Urgent - Looking for captivate developer for freelance work in South of UK

Hi,
We are urgently looking for some freelance developer with atleast 1-2 years of experience in Captivate 7 and atleast some experience in captivate 8. If interested can you please get in touch with me on [email protected]
Thanks
Ganesh

Hi,
I have a good experience in adobe captivate * UI Design.
Looking forward to you reply.
Thanks
Puneet

Looking for Integrated Development Environment

Similar Messages

Maybe you are looking for