Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

Hi,
Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
uggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
Some useful resources for your application are
ni.com > NI Developer Zone > Development Library > Instrument Connectivity
http:/
/search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
Hope this helps!
Best Regards,
Aaron K.
Application Engineer
National Instruments

Similar Messages

Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
Does anyone have one?
Thanks,
Avner

Hello,
It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
Thank you,
JLS
Best,
JLS
Sixclear

I am looking for LabVIEW driver for MAVOLOG10 L/N/S from GMC-Instruments.

For testing power supplies we use the MAVOLOG 10 Power Quality Monitor for 3 phase Systems. So we use LabVIEW as test enviroment we need information where to find a driver.

Hello,
I just did a search of the web for "mavolog labview" and found absolutely nothing. I think just about the only place you might be able to find a LabVIEW driver for this device would be from the manufacturer. Hopefully they can help you out. If they have nothing, there are some helpful resources at www.ni.com/idnet for developing your own instrument driver.
Good luck with your application, and have a good day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Looking for Labview driver for Agilent 4294A (HP)

Help!
I've been browsing the driver database looking for the Labview GPIB driver
for Agilent(formerly HP) 4294A Gain-Phase Analyzer.
Does anyone know where I can get it?

Hello all,
NI is interested in developing LabVIEW and CVI drivers for the Agilent 4294A. I have been trying to obtain one of these units on loan from Agilent for the past couple of years with no success. If anyone can spare their 4294A for the duration of driver development or can influence Agilent to loan a 4294A, NI will write certified CVI and LabVIEW drivers for it.
Jason Hobbs
Instrument Drivers

Looking for LabView driver for Watlow 96 Series Temp. Controller.

In need of LabView driver to control a Watlow 96 Series Temperature Controller. The controller has a RS232 output, so I'm preferably looking for a serial port driver. Thanks in advance.

Nevermind....I found some very useful information in Brian Vibert's postings. Do a search for Watlow 96 Series.

Looking for Labview driver for Netcom Systems Smartbits

I am trying to establish a TCP/IP connection to SmartBits through Labview.Has anyone attempted this.Is it possible to communicate this way?

Yes it is. We normally use the serial port bur we have tried TCP/IP. Spirent has a lot of LabVIEW code available for the Smartbits. You should contact your sales engineer about the driver.

Looking for LabView Driver for E5052A

Hi Everyone,
I'm trying to automate the E5052A. I couldn't
find any kind of drivers on Agilent's website and NI's website. Could someone
hep me with this? I'm not a professional software guy to write a DLL etc. but I
have used ActiveX and PnP drivers to program other instruments.
Thanks a
lot....
-Sreekar

You may download IVI-COM driver from http://www.home.agilent.com/agilent/facet.jspx?t=80126.k.3&ki[0]=E5052A&cc=US&lc=eng&sm=g
Good luck!

Looking for labview driver to control Tennesy Chamber

Looking for Labview driver to control Tennesy Jr Environmental Chamber
(Watlow series 942 controller) LV6.0
Email [email protected] if you can help out.
Thanks,
David.

The first place to look for stuff like this is the vendor's web page--in this case www.watlow.com. How did I know this? I guessed. You can typically guess 90% of company websites...
In a couple minutes I was able to find your controller and a document on how to communicate with it. If you email me I can send it to you (it's too big to post...).
Next, reading the document (which by the way contains a good basic primer on serial communications)I saw that one of the protocols you can use for communicating with the 942 is Modbus RTU. I can also send you a set of modbus drivers.
Hope this helps in thermal testing your chips...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

LabVIEW driver for a ControlTechniques motor controller

Anyone know of LabVIEW driver for a ControlTechniques
Unidrive motor controller?
Or any info/pointers to programming them via LabVIEW?
Any help much appreciated
Paul
Dr Paul Rocca - Managing Director
Brill Engineering Ltd, 3 Longwood Court,
Love Lane, Cirencester, Gloucestershire
GL7 1YG. www.brill-eng.co.uk
Phone: 01285 883888 Fax: 01285 883876
NI Alliance Member Since 1992
Please note that calls may be recorded using our leading edge digital
recording product AudioPC.
Any opinions expressed in the email are those of the individual and not
necessarily of the Company. This email and any files transmitted with it are
confidential a
nd solely for the use of the intended recipient. It may
contain material protected by lawyer-client privilege. If you are not the
intended recipient or the person responsible for delivering to the intended
recipient, be advised that you have received this email in error and that
any use is strictly prohibited. If you have received this email in error ple
ase notify the Security Manager by telephone on +44 (0)1285 883821 or by
email to [email protected]

LV can interface to 232, 485, Devicenet... depending on what the controller has.
You could find a LV/CVI driver for this (232/GPIB/ethernet only) instrument at http://www.ni.com/devzone/idnet/default.htm . If it's not listed there, it leaves you with one of a couple options. First, I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/
We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program. With all of this work already done for you in the driver, instrument drivers can significantly reduce development time.
There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
Some useful resources for your application are
ni.com > NI Developer Zone > Development Library > Instrument Connectivity
http://search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
Hope this helps.

I am Looking for a driver for HPD2N automaton

I am Looking for a labview driver for HPD2N automaton from SBC to control motor.
Regards
Greg
Greg S.
CNRS
LV 7.1 8.2 8.6 2009 2011 2012 2013
LPMC - CNRS
N'oubliez pas de complimenter cela fait toujours plaisir.

Greg,
National Instruments does not have a LabVIEW driver for HPD2N.
All instrument drivers that we have are accessible from:
http://ni.com/devzone/idnet/
Zvezdana S.
National Instruments

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Looking for LabVIEW drivers for Aritsu MS462XX VNA?

I'm looking for LabVIEW drivers for the Anritsu model MS4623D Vector Network Analyzer? Have gone to Aritsu's site and downloaded their tools but no LabVIEW source found. The other thing is whether anyone's developed LabVIEW interfaces to theirTools (Navigator or Power Tools or SCE)???

Hi,
Unfortunately, we do not have an instrument specific driver for this Anritsu model MS4623D. Here is a link to the drivers we do have for Anritsu. We may be able to get communication to your device threw another means. How does your device communicate? For example is it GPIB or Serial. We may be able to use an NI driver and a programming manual for your device and communicate with it in LabVIEW threw this.
Regards
Krista S.
Applications Engineering
National Instruments

Does sombody have a labview driver for the Scanlab rtc2 scanner controller

From the German firm Scanlab we have a RTC2 isa card with a dll. Has somebody already written a labview driver for this card ?
greetings from the Netherlands

Hello Martin,
First, don t worry it shouldn t be very complicated I work at a reasearch center with physicist and an hospital with physicians, we probably work on something very similar, like eye surgery assisted by laser
1- First thing first, does your scanner works with the examples provided with Scanlabs? ex.: "Hpgl.exe" with an "*.PLT" file?
2- If so, have a look at my load correction subVI, I always do a reset before I start working with the scanner control, only once at the beginning. If the function returs :"0" zero, it s working if not, come back to me.
regards
Lukasz
Attachments:
LOAD CORR FILE (SubVI).vi ‏9 KB

Looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you

looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you Dont need all the photo suite stuff,just basic scan and print.
Thanks

Hi @RUkiddingme
You can download the full feature software and driver, and only install the basic driver. In the installation you should see the option for custom software. Here is the link to download the software; rw2_021_w02_enu.exe
Please let me know if this resolves the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Is there any LabVIEW driver for the Agilent 53147A counter/power meter?

I am trying to find a LabVIEW driver for the Agilent 53147A counter/power meter, but I cannot find it. Is there any?

NI does not have a driver and a quick check with Agilent shows that they don't have a driver either.
You can go to http://www.ni.com/devzone/idnet/ and request a driver. You will also find links on how to create your own driver. Your other option is to use the Instrument I/O Assistant.
p.s. In the future, you should use the Instrument control board for posting questions. this board is for NI counter/timer products.

Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

Similar Messages

Maybe you are looking for