Looking for some assistance
I would be classified as a beginner when it comes to flash.
When searching around in the forums, I feel completely lost when I
see a huge list of actionscript. However, I was hoping someone
would be able to direct me to some great beginner tutorials or
assist me right in here. What i'm trying to do is build a website
to showcase my work as a game designer; mainly artwork, movies,
flash games, and user downloadable modding/mapping files. What I'm
looking for is....
1) How to load images/movies from external sources. I managed
to find a resource that explains using "load external movieclip".
It works perfectly for the images, and seemed to work for .swf
files. However, what can I use to load other movie types such as
(.wmv, .mpg, .avi)?
2) How to add a simple preloader to the images/movies that
will be loading.
3) How to load flash games. I'm not certain, but my best
guess is that I could use the "low external movieclip" behavior.
4) The last thing I want to know is how I can allow users to
download files from my flash site. I'm going to use a simple
button, but I'm unsure of how to set that up.
Like I said, I'm only a beginner, so any tutorials related to
what I need or code samples of what might work would be greatly
appreciated. Thank you!
Seems a canny bit out of my scope lol, but could you not just
use invisible buttons again, but place them on higher layers than
the main one?
Similar Messages
-
Im looking for some assistance in configuring our wireles...
Im looking for some assistance in configuring our wireless router to allow remote connections into it.. and then from there access any of the 5 computers on our network. I dont have the model number with me now, but just want to know where to start....
Goal=== to allow me to access our remote locations network and access / vnc into our 5 terminals...
I just need to know how i can configure the router to allow outside connections and then from there connect to our other machines via VNC...
Any suggestions on where to start with this?in order to access the router remotely , you need to enable remote management on the router and to access the terminals using VNC .. you need to open the ports used by VNC ..
-
Looking for some assistance upgrading to snow leopard
Hello!
I am upgrading to snow leopard from mac osx 10.4.11 (which i believe is tiger). I have an intel-based mac.
I have read about doing a "clean install" and have heard that it can be beneficial. I have an external hard drive that is about twice the size of my internal hard drive.
I will be purchasing the "box set" of snow leopard (i heard that if one is upgrading from tiger they must buy the box set-not sure if this is necessarily true though).
Ok, so I have searched the forum for "how to do a clean install" and some of the terminology was beyond me.
I am looking for step-by-step instruction for doing a clean install in layman's terms.
I think this will be helpful for many others who utilize the search function.
I thank you in advance and will mark useful responses as such.I would not upgrade to Snow unless I had an external drive with a bootable clone of my internal-drive boot volume on it. I think that there is enough risk upgrading to Snow that such conservatism is warranted. I would not use time machine for an installation backup; I don't trust it enough. To make a bootable clone using Disk Utility (DU):
1. Start DU;
2. Make sure you external drive is partitioned GUID (not totally necessary, but I'd do it);
3. Choose Restore;
4. Drag your internal volume to the source box;
5. Drag your external partition to the destination box;
6. Choose Erase Destination; and
7. Click restore.
It will take an hour more or less. Once the clone is made, start up from it to make sure it is functional.
If you do an erase and install, then you will be able to migrate your data, settings, users, and apps from your clone at the end of the install. If you do not like Snow, then you can restore your internal using the clone. The clone is your data backup, possible migration medium, and fail-safe device.
To do an erase and install, start up to your DVD by holding down C during startup, and stop after selecting your language. Use the menus to start Disk Utility and to make sure your drive has a GUID partition. If it does, then use disk utility to erase Mac extended (journaled). If it is not GUID, then make it GUID by selecting the number of partitions you want (even if the number shown is what you want). Selecting GUID will erase your drive correctly. In either case, quit Disk Utility, and continue your installation. At the end, you will be able use the Setup Assistant to migrate your data, settings, users, and apps from your clone.
You probably will want to install at least two of the optional install items, Rosetta (if you plan on using any PPC apps) and QT7. You can install either from the Optional Install Items folder on your on Sno install DVD.
Leave your Ethernet cable, if any, in place when installing, but unplug all unecessary peripherals except those needed to install. -
Looking for some assistance with my bill
A little back story. December 2009, I purchased/upgraded to Verizon’s new Motorola DROID. Loved the phone, served me well. I had a $59.99 phone plan and the $30 unlimited data plan. In November of 2010, I get an email from Verizon offering a limited promotion for $69.99 (included 450 anytime minutes, unlimited text/data). What Verizon did, was essentially give me a $20 discount on my bill each month from then on.
Now, it’s March of this year. I’ve dropped the DROID a couple times, nothing major though. But this time was different, the screen was cracked and I couldn’t get the screen to power on (although haptic still worked). At the time, I was waiting for the rumored DROID Bionic, so I decided not to upgrade right then.
I stopped by a local corporate store and explained the situation. I had an old flip phone that I wanted them to re-activate. But I clearly stated that I wanted to continue paying for the data package as I was afraid I’d lose my $20 discount and when I upgraded to a new phone, I’d be stuck paying my old full rates again.
I was told this would be fine, the rep even told me it would be wise to continue paying for data as he couldn’t tell me anything about how Verizon’s billing system handled my $20 monthly discount.
So, despite the fact that I wasn’t using my data, I continued to fork out the cash each month. A little over a month ago now, I decided enough was enough and I upgraded to the DROID Incredible 2. I first stopped at the corporate store, but quickly changed my mind. Going to a corporate store has become as bad as showing up at the Secretary of States office. Endless lines. So, I went to a third-party retailer (Russell Wireless) that just opened down the road. I gave them the back story about why I was still paying data rates and all, said everything would be fine. They got me upgraded and I’m out the door with my new DInc2.
Everything was fine, until I got my first bill after my upgrade. Amount due was $96 and change (essentially $20 over my normal bill rate). So, not only was my $20 discount gone, but my unlimited data plan had been changed to a 2GB data plan. Despite being told that I’d be grandfathered in to unlimited data when Verizon made the switch over to tiered plans.
Once again, I stopped in to the local corporate store, long lines. So, I head back to Russell Wireless. They can’t see much from their end, so I logged in to my VZW.com account on his PC so I could show him my bill. I left without an answer, but he suggested I call support.
I spoke to a rep named Jeff, and said he’d have to submit an Inactive Plan Request. Something that he’d gotten used to over the past few weeks due to Verizon changing to tiered plans. I explained the situation and said it wouldn’t be a problem. That was on Thursday, August 4th. Jeff said either himself or another rep would call me back by the following Tuesday to let me know that I was good to go with my old rates. Also, he went ahead and changed my amount due on my bill to my regular rate of $76.
I log in and pay my bill as normal. All seemed fine, until I get my latest bill. Which is again, asking for $96. Nothing had changed on my account for the better. I email support and explain the situation once again. This morning, I received the following response:
“In review of your account, I show you have the previous Motorola Droid activated on your account from December 2009 until March 2011. On March 4, 2011 you activated a basic phone LG VX8350 with a non-smartphone unlimited data bundle. The basic phone was activated on your account for over 30 days from March 4, 2011 through July 18, 2011. After activating a basic phone to your account for over thirty days, the Unlimited Email and Web for Smartphone data bundle can no longer be grandfathered when upgrading to a new smartphone device. This is why the new data pricing went into effect on your account when you upgraded on July 18, 2011 and the request was denied.
I apologize we are unable to add the Unlimited Email and Web for smartphone to your account as the feature is no longer available. Please keep in mind the current data plan you are currently on is the same pricing as your previous data plan. As a matter of fact, over 90% of our Smartphone customers use less than 2 GB of data each month. You may always keep track of your data usage by dialing #DATA or #3282 send.”
For one, I must fall in to that 10% as I was nearly over my 2GB limit last month. Also, no one had explained to me that there was a difference between dumbphone and smartphone data plans, especially because they were both the same rate each month (Which, for the record, are not named any differently on my past bills). Everyone I spoke to said I would have no issues with this switch and that I would indeed by grandfathered in with my original $20 discount.
I contacted support again because they never addressed my discount in the above email response. Here is the response I just received:
"I will be happy to address your concerns pertaining to the $20.00 discount you had previously. in review of your account I found that the $20.00 discount was available only while on the $29.99 data plan. When your data feature was changed from the $29.99 data plan to the $30.00 pricing on July 18th, that $20.00 credit was no longer an available option."
At this point, my irritation is turning to something bigger. I’ve been a loyal Verizon customer for years, they have pretty solid service in my area, and most of my friends and family use Verizon by now (free Verizon-to-Verizon calls). My employer even has a 15% discount on monthly fees through AT&T, but I’ve remained with Verizon still. But this whole situation is leaving a bad taste in my mouth. I understand that at some point, in some fine print somewhere, there may have been some mention about the 30 days on a dumbphone data plans screws everything up but I honestly don’t ever recall being given any documents that said such things. In fact, prior to my most recent upgrade, I don’t recall being given any paperwork or signing anything since my upgrade to the DROID back in 2009.Going to the third party re-seller could be part of the issue, but also VZW now has a rule that if you go to a feature phone from a Smartphone, you have x amount of days to get back on a smartphone and keep unlimited data.Not much you can do to get around that.
Going back to the Reseller. Even if VZW was able to get you back on the plan, you most likely would be hit with a $300+ETF from the reseller for changing something on your plan within 181 of sgning the contract with them.
Either way, you would be paying more. -
Looking for some assistancte in GUI_DOWNLOAD
Hi there,
See I have this exercise I have to do here. Basically I have to create a program that will download the contects of SBOOK to my pc. I have to use GUI_DOWNLOAD in this exercise. Also, the user will have to input the path and file name of the file to be downloaded to. I have place appropriate error message on the screen as well but I'm not sure how to do this.Being relatively new to this, I tried looking for some samples and this is what I came up so far.
REPORT ZISTANZS_TRNG_EX9C.
TABLES: SBOOK.
PARAMETERS: FILEINP(30) DEFAULT 'c:\TEMP\wee.txt' OBLIGATORY.
DATA: BEGIN OF ITAB OCCURS 100.
INCLUDE STRUCTURE SBOOK.
DATA: END OF ITAB.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = FILEINP
FILETYPE = 'ASC'
write_field_separator = 'X'
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
OTHERS = 3.
Unfortunately, it doesn't work though. It keeps saying that my FILENAME is not the same data type as FILEINP? I'm asking for some assistance in how this can be properly solved? Any help would be appreciated /Hi,
Please refer the code below:
* File download, uses older techniques but achieves a perfectly
* acceptable solution which also allows the user to append data to
* an existing file.
PARAMETERS: p_file like rlgrap-filename.
* Internal table to store export data
DATA: begin of it_excelfile occurs 0,
row(500) type c,
end of it_excelfile.
DATA: rc TYPE sy-ucomm,
ld_answer TYPE c.
CALL FUNCTION 'WS_QUERY'
EXPORTING
query = 'FE' "File Exist?
filename = p_file
IMPORTING
return = rc.
IF rc NE 0. "If File alread exists
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
* TITLEBAR = ' '
* DIAGNOSE_OBJECT = ' '
text_question = 'File Already exists!!'
text_button_1 = 'Replace'
* ICON_BUTTON_1 = ' '
text_button_2 = 'New name'
* ICON_BUTTON_2 = ' '
* DEFAULT_BUTTON = '1'
* DISPLAY_CANCEL_BUTTON = 'X'
* USERDEFINED_F1_HELP = ' '
* START_COLUMN = 25
* START_ROW = 6
* POPUP_TYPE =
IMPORTING
answer = ld_answer
* TABLES
* PARAMETER =
EXCEPTIONS
text_not_found = 1
OTHERS = 2.
* Option 1: Overwrite
IF ld_answer EQ '1'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = p_file "File Name
filetype = 'ASC'
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_excelfile "Data table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i003(zp) WITH
'There was an error during Excel file creation'(200).
exit. "Causes short dump if removed and excel document was open
ENDIF.
* Option 2: New name.
ELSEIF ld_answer EQ '2'.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
filename = p_file "File name
filetype = 'ASC' "File type
* col_select = 'X' "COL_SELECT
* col_selectmask = 'XXXXXXXXXXXXXXXXXXXXXXXXXX'
* "COL_SELECTMASK
filetype_no_show = 'X' "Show file type selection?
* IMPORTING
* act_filename = filename_dat
TABLES
data_tab = it_excelfile "Data table
* fieldnames =
EXCEPTIONS
file_open_error = 01
file_write_error = 02
invalid_filesize = 03
invalid_table_width = 04
invalid_type = 05
no_batch = 06
unknown_error = 07.
ENDIF.
ELSE. "File does not alread exist.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = p_file "File name
filetype = 'ASC' "File type
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_excelfile "Data table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i003(zp) WITH
'There was an error during Excel file creation'(200).
exit. "Causes short dump if removed and excel document was open
ENDIF.
ENDIF.
Thanks,
Sriram Ponna. -
Looking for some assurances that I haven't made a mistake switching to Mac.
Bought an intel-powered IMac 9 days ago and love everything about it's look, functionality, etc.. Only problem: I've had a bout of "Application has closed unexpectedly" occcurrances while using Safari (while at AOL.com deleting emails from aol account) and while editing pics in iPhoto. As this happened time and again, I got a sad, sinking feeling that I'm headed for the same frustrations that I've had w/ every Windows machine I've ever owned. Ugh!..I switched to Apple for the specific purpose of avoiding crashes!!! Apple support walked me through steps to fix (removed/updated Quicktime, and check a few other things..). They were very helpful, but... I absolutely detest having to do this. Other than Office:Mac, i've added nothing to this machine! I'm really stressed about this. I paid far more for this than I would have for a Windows machine simply because I had heard that Apple machines don't do this sort of thing!!
Please tell me that this is normal and expected with a new machine and not a harbinger of more complicated problems to come!! I'm hoping that once resolved, I won't much more of this.. On the other hand, if many of you feel that this issue is a bad omen, I'll take the machine back while I still can. ..What a pity though, it's truly been a joy to use so far.
IMAC (early 2006) Mac OS X (10.4.4)Hi syd123! And Welcome to Discussions!
No you haven't made a mistake! You will love your Mac!
Deleting AOL Mail, crashes Safari (Consolidation)
It seems the most recent Safari, and or 10.4.4, update has created this problem.
Apple & AOL are both aware of this, but, as far as I know, no correction has been implemented.
Here are some of the work arounds, that I have been able to discern from the various posts regarding this issue.
Use the FIREFOX BROWSER.
Use your AOL Mail program.
Use this utility AOL SERVICES ASSISTANT, to set up Apple Mail, to access AOL Mail.
Access the AOL Mail thru Classic AOL Webmail.
And here are links, to the various threads, discussing this issue.
<a href="http://discussions.apple.com/thread.jspa?threadID=314479&start=0&tstart=0 "Safari and AOL</a>
AOL/ Delete/ Safari crash
safari crashing with aol.com mail deletion
AOL Webmail and Safari on 10.4.2 crashes on delete mail
Update 10.4.4 causes crash
Safari crashes when deleting email on AOL
Safari Update
Safari Crashes AOL mail
Safari Crashes when Deleting or Reporting E-Mail as SPAM on AOL Web Mail
Looking for some assurances that I haven't made a mistake switching to Mac. This Thread
Good Luck!
ali b -
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
Looking for some advice dealing with Kernel Panics
Hi there! I'm looking for some help regarding constant kernel panics I've been getting on my machine. It has been happening pretty regularly for the last month or so, occuring sometimes three times in one day and other times none. I've been looking to see what might cause the issue and have thus far come up emptyhanded. I can't think of anything I've modified recently that would be causing the issue. I performed a hardware test using AHT and no errors were found. I've included both the most recent report from the panic as well as the EtreCheck report. Any and all advice is appreciated!
Thanks in advance!
Anonymous UUID: D680EEB6-4BD2-B93C-318E-D6D262CA3B53
Mon Apr 28 17:28:08 2014
panic(cpu 0 caller 0xffffff7f875b6fb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811c014000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80f57cb140 : 0xffffff8005222fa9
0xffffff80f57cb1c0 : 0xffffff7f875b6fb0
0xffffff80f57cb290 : 0xffffff7f85c94eab
0xffffff80f57cb350 : 0xffffff7f85d5e49a
0xffffff80f57cb390 : 0xffffff7f85d5e50a
0xffffff80f57cb400 : 0xffffff7f85fdd056
0xffffff80f57cb530 : 0xffffff7f85d81b39
0xffffff80f57cb550 : 0xffffff7f85c9b8fd
0xffffff80f57cb600 : 0xffffff7f85c99408
0xffffff80f57cb800 : 0xffffff7f85c9a386
0xffffff80f57cb8e0 : 0xffffff7f86c0c9c2
0xffffff80f57cb920 : 0xffffff7f86c1c37f
0xffffff80f57cb940 : 0xffffff7f86c4a33b
0xffffff80f57cb980 : 0xffffff7f86c4a39b
0xffffff80f57cb9c0 : 0xffffff7f86c21e15
0xffffff80f57cba10 : 0xffffff7f86bedb5e
0xffffff80f57cbaa0 : 0xffffff7f86be9ae7
0xffffff80f57cbad0 : 0xffffff7f86be7636
0xffffff80f57cbb00 : 0xffffff80056cbe03
0xffffff80f57cbb90 : 0xffffff80056cdcff
0xffffff80f57cbbf0 : 0xffffff80056cb81f
0xffffff80f57cbd40 : 0xffffff80052b6558
0xffffff80f57cbe50 : 0xffffff8005226bf1
0xffffff80f57cbe80 : 0xffffff80052139f5
0xffffff80f57cbef0 : 0xffffff800521e043
0xffffff80f57cbf70 : 0xffffff80052c976d
0xffffff80f57cbfb0 : 0xffffff80052f3b46
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000->0xffffff7f85eadfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f85eb8000->0xffffff7f86161fff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@ 0xffffff7f875a9000->0xffffff7f875bbfff
dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7f875a1000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f85bdd000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f875a4000
com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f8 6bcc000->0xffffff7f86c96fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000005000000
Kernel text base: 0xffffff8005200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 31531656545358
last loaded kext at 27797939824574: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f876b9000, size 20480)
last unloaded kext at 27858255752654: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f876b9000, size 16384)
loaded kexts:
com.splashtop.driver.SRXFrameBufferConnector 1.5
com.avatron.AVExFramebuffer 1.7
com.splashtop.driver.SRXDisplayCard 1.5
com.Cycling74.driver.Soundflower 1.5.2
com.avatron.AVExVideo 1.7
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AGPM 100.14.15
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.35
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.CoreStorage 380
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: iPhone
USB Device: Built-in iSight
USB Device: IR Receiver
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
Thunderbolt Bus:
EtreCheck:
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:8:28
Disk Information:
Hitachi HTS725050A9A362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 499.25 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. iPhone
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 7
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[kext loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[kext loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) Support
[kext loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) Support
[kext loaded] com.splashtop.driver.SRXDisplayCard (1.5 - SDK 10.8) Support
[kext loaded] com.splashtop.driver.SRXFrameBufferConnector (1.5 - SDK 10.8) Support
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.barebones.textwrangler.plist Support
[loaded] com.bitcasa.BitcasaUpdateCheck.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.realvnc.vncserver.plist Support
[failed] com.splashtop.streamer.SRServiceDaemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.amazon.sendtokindle.launcher.plist Support
[failed] com.bitcasa.BitcasaUI.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.realvnc.vncserver.peruser.plist Support
[not loaded] com.realvnc.vncserver.prelogin.plist Support
[failed] com.splashtop.streamer.SRServiceAgent.plist Support
[running] klpr-relay.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[running] com.pando.PMB.plist Support
[failed] com.ruudburger.couchpotatoserver.plist Support
[failed] com.ruudburger.headphones.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items:
runapp.command
Dropbox
Alfred 2
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.0.18358 Support
Default Browser: Version: 537 - SDK 10.9
SlingPlayer: Version: (null) Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 Support
googletalkbrowserplugin: Version: 5.3.0.18358 Support
AdobePDFViewer: Version: 10.1.9 Support
PandoWebPlugin: Version: PandoWebPlugin 2.3.3.8 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.2.1 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071706000001 Support
3rd Party Preference Panes:
Flash Player Support
Java Support
Perian Support
Time Machine:
Skip System Files: YES - System files not being backed up
Auto backup: YES
Volumes being backed up:
Destinations:
MyBook [Local]
Total size: 2
Total number of backups: 2
Oldest backup: 2012-08-22 09:59:19 +0000
Last backup: 2013-05-08 19:40:47 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 0 B X 3)
Time Machine Backups [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
100% Microsoft Word
3% WindowServer
2% mdworker
2% Google Chrome
0% fontd
Top Processes by Memory:
246 MB iTunes
180 MB Google Chrome
172 MB WindowServer
156 MB com.apple.IconServicesAgent
131 MB Microsoft Word
Virtual Memory Information:
3.54 GB Free RAM
2.59 GB Active RAM
730 MB Inactive RAM
1.15 GB Wired RAM
475 MB Page-ins
0 B Page-outsThe likely culprit:
The problem is likely due to the discreet GPU failing. Download gfxCardStatus 2.3 and use it to disable the GPU. This is a temporary workaround until you get your motherboard replaced.
Possible other causes are the software that installed these:
com.splashtop.driver.SRXFrameBufferConnector 1.5
com.avatron.AVExFramebuffer 1.7
com.splashtop.driver.SRXDisplayCard 1.5
com.avatron.AVExVideo 1.7
Now they may be causing panics because the try to use acceleration in the GPU which leads to the panics. You are unlucky to have a particular model that has a real problem with this. -
I am trying to back up my mail (5.1) directories but I can no longer locate them. They used to be in the user library. Would be grateful for some assistance.
They're stil there; Apple decided to hide your Library folder. Hold the Alt/Option key while selecting Go in a Finder menubar and select Library.
Do you have other backups, made with a proper backup app? If not, that's the best way to back up your data, rather than doing it "piecemeal" via drag & drop.
You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions. -
I'm looking for some inspiration here on how best to set up my TC
Copied from a post else where, any help greatly appreciated!!
I'm looking for some inspiration here on how best to set up my TC for my needs & wondering how others do for similar needs....
I have a 2TB TC that I have set up so that all of mine & my girlfriends photo's, music, movies & documents are on the one location so that we can access it wirelessly from both our MacBooks & also from a MacMini which I'm going to buy in a month or 2. Changing the location for where iTunes & iPhoto look wasn't a problem but browsing through iPhoto in particular is really slow due to the number of previews I presume, and also we are now unable to have any of the media with us when traveling about, synching phones on the move is a disaster as well!
Anyway,
is there an easy way of setting up iTunes / iPhoto so that we can have all the data on the TC managed on the MacMini but import small iTunes Playlists & iPhoto Albums to our MacBooks without having to change in preferences where the applications look for data each time we get home?
Any help anybody can offer would be grand!
Thanks in advance.........You topic might be better suited for the iPhoto or iTunes forums, since your question seems to be with the application(s) functionality, not really the Time Capsules. However, if you start iPhoto or iTunes while holding down on the "option/alt" key, you can manually select a library to access. When you want one of your computers to access the library on the Time Capsule, make sure it's mounted as a shared volume on your Desktop and then open iTunes and point it towards the library on the Time Capsule. If you want to use a smaller library on your computer, open iTunes and point it to the library on your Mac. I've never switched back and forth multiple times between multiple libraries, so you might check in the iPhoto or iTunes forums to see if any issues may arise from doing this repeatedly.
-Doug -
Looking for some help in creating an ItemFilter for a Targeter
Looking for some help in creating an ItemFilter for a Targeter
Need a examples for creating itemfilter and TargeterFirstHi David,
We can integrate Syncfusion with LightSwitch application, if you want to customize column when create a report using syncfusion reportviewer, since I didn't try this third party
extension before, I think you could consider getting help from
syncfusion forum, more syncfusion experts can help you on this issue.
Thanks for your understanding.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Looking for some advice.
Hi. Hope this is right forum. First post. A brief background. Years ago (2007-2008) I created a web portfolio for school. First it was in HTML (Dreamweaver) and then Flash. I hadn't really touched it in years and decided this past couple of months, after playing in the medium again, to get back into wed design, 3d, and digital content creation. That said, I went in and updated both the HTML and Flash versions with the knowledge I currently have, limited though it is. I now would like to go forward and build a completely new site and teach myself HTML, JavaScript, and WebGL along the way (possibly before hand). Hopefully I'll get working on the new site before the end of the year. In the mean time, I'm using my old site as a stop-gap measure. I've also taken books out from the library to begin journey into the above mentioned languages.
This all said, I'm looking for some advice on what direction I should go next...look into... Does my current objective seem reasonable? Also, could anyone give feedback on what I did wrong and what I've done right on my old site. I think, as far as what went wrong, the Flash page is just too large. No one wants to wait so long for it to load. I think I got carried away with it. Also, too many sound effects. That said, I think the HTML site was constructed in an "old-fashion" way. No one makes sites like that anymore. I basically set it up in Photoshop, sliced it, and assembled it in Dreamweaver. The end result is a bunch of tables in HTML? A friend suggested I look into a CMS (?) like WordPress?
Here's my current site: http://www.personal.kent.edu/~mstingle/
Constructive feedback on what I did right and wrong would be great. And, where I should be looking next for rebuild of my portfolio.
Cheers.WebGL is still experimental. Most browsers don't fully support it yet.
http://caniuse.com/webgl
The current trend is Responsive Web Design -- layouts that work in all devices (mobile, tablet and desktop). This technology relies on CSS layouts (no tables) with media queries for different viewport widths. Below is a crude example built with the FluidGrid Layouts feature in DW CS6 or CC:
http://alt-web.com/FluidGrid/Fluid2.html -- resize your browser's viewport to see it in action.
Flash is dead on the web now because the world's most popular mobile & tablet devices don't support it. Animations are mostly being built with HTML5, CSS3 and JavaScript. See Adobe Edge Animate.
If you're not a skilled coder and just want a basic static web site, Adobe Muse might be all you need. http://www.adobe.com/products/muse.html That said, Muse cannot support server-side programming so you can't use it for advanced features like CMSs, blogs, etc...
If you're a Creative Cloud member, you can use Behance & ProSite to build & share your portfolio online.
http://www.adobe.com/products/creativecloud/behance-community.html
http://prosite.com/
In terms of your own site, ask yourself how much content & which features it will need to support in the coming months/years. If it's going to be a relatively small site (under 20 pages), a static HTML site is probably all you need. IMO, WordPress -- a dynamic CMS built with PHP & MySql databases -- would be overkill. However, if you plan to make your site into a blog for example, then a dynamic CMS is an option to consider. WordPress isn't the only kid on the block either. There's also Drupal, Joomla!, and many more...
Nancy O. -
Looking for some advice on what to do about
So I have a macbook pro - late 2007 model I guess
2.16 core duo(just before the core 2 duo's i guess)
2gig's ram
ATY,RadeonX1600 256mb
My problem itself is in 3 parts
1.) My battery fried late 2008(have it running off the adapter since) and I was wondering if my model will fit with the 2008 model batteries? If so do you know how much it would cost(cdn dollars if possible)
2.) My video card is from what I believe to be ruined/terrible shape. I've been using SMC fan control for awhile to sway the overheating, and it helps but I believe the damage was already done while I did not have it active while using my computer for games and other various things(MBP's seem to run insanely hot?)
I will be calling the apple store i bought it from tomorrow but I was looking for some advice on any type of diagnostic tests I might be able to do to test my video card as well how much would it cost to replace(assuming you can't upgrade much in a laptop)
3.) Wondering your opinion on the overall value of the computer with the replacements/without.
It appears to run perfectly fine though sometimes when program's open up I start to see tearing and pixel's looking crazy all over my screen(assuming a fried video card)You can buy the battery design for any old MacBook Pro models (not the unibody). MacBook Pro from the first to the last generation uses the same battery. It cost $129 (not sure how much it cost in Canadian but probably a $20-$30 premium). As for your graphics card, Apple has a one price model for all hardware repairs ($310 or something around there and converted to Canadian probably around $350 to $360). I think you should get it replaced. The only test that I can think of is to re-install the OS and see if the problem occurs, if it does then its most likely a hardware issue. There is no standard test that's widely available. With the replacement I think the computer values in the range of $1800 to $1500) and without the repair I would say about $1350 to $1000 at best.
-
Looking for some design ideas...
We'd like to re-vamp a few sites from our portfolio and are looking to do so with some simple flash ideas but being new to flash we are having some trouble coming up with ideas. Looking for some ideas for the following 3 sites:
http://www.goldenflax.com Golden Flax Seed Production & Sales
http://www.cbhockey.com Hockey Stick Manufacturer
http://www.northcountryfudgeshoppe.com Homemade Fudge Sales
We appreciate any advice that can be offered. If you are a designer with a larger idea, please submit a ballpark estimate to the email in my profile.Hi andy,
You need to go for BPM for your requirement.
For multiple SOAP Action you need to specify the action name in SOAP receiver adapter.
You can create 3 SOAp channel with 3 different action.
or create one channel and set the Action name dynamically in Mapping.
SOAP Action
Specify the SOAP action. The action species the value for the SOAPAction in Web service messages.
Refer this link for help
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
When calling the service, the results of the first method need to be passed as inputs into the second and third methods. The results from the second method need to be mapped to Idocs in XI and sent Async.
BPM step:
Receive the requyest in BPM
Send step: Make Fisrt call to SOAP(Mapping: Receive request toSOAP request)
Send step: Make second call to SOAP(Mapping First SOAP response to second SOAP Request)
Send step: Make third call to SOAP(Mapping: First SOAP response to Third SOAP Request)
Send step: Send Step to ECC(Mapping : Second response to IDOC) -
Looking for Some Recommendations on A Printer for the 15" MPB
Hello-
I have a 15" retina display MBP configured in the works. I have only used Cannon printers in the past with my Apple computers and prefer to stay with a Cannon for the new MBP retina dispaly. I am looking for some personal recommendations to look at from people that have a current Cannon printer/scanner and are pleased with the machine.I got one with my computer that I love. I'm a fan of all-in-ones because I have every function there if I need it. Plus, this one has airprint, so you can have the printer join your wifi network, and instantly print to it from any iOS device or Mac without any setup - it just works.
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg4120
Maybe you are looking for
-
When trying to update apps from iPad and iPhone a previous one time users email keeps coming up. How do I delete their information?
-
Crystal Report Parameter not showing in IPAD
Hi All, I create simple Purchase register report by using Crystal report with date parameter My problem is that report not working on Ipad and its showing blank space . The report working fine on ipad when i run report without parameter. Kindly t
-
Hi all, I know the default rule is to use the dispatch thread to perform gui-related job, but there are some exceptions as well. I have an application with several tabbed panes. Every tabbed pane shows some charts, which need to be updated even when
-
Presenter View During Live Events In Show and Share
Hi, I am a bit confused about the user authorisation during live events of Show and Share. There is a user who is creating the event and publishing it. I think this user should be the moderator. He can see the questions tab and check the questions co
-
Moving to another country and bringing the iphone
Hi, I bought an iPhone 3G in Venezuela in January. There you are not tied to a contract but the cell is locked. If I move to US or Canada and I want to use the iPhone how can I do? I have reviewed several Q/A and according to the link: http://support