Looking for some help in creating dynamic rdlc report for Desktop Application
Hello ,
I currently have the syncfusion reportviewer running in my desktop application, now what I am looking to do is create a report where my users, can select and deselect what columns and Items they want to print out. Is there any way to do this ?
Thanks
David.
Hi David,
We can integrate Syncfusion with LightSwitch application, if you want to customize column when create a report using syncfusion reportviewer, since I didn't try this third party
extension before, I think you could consider getting help from
syncfusion forum, more syncfusion experts can help you on this issue.
Thanks for your understanding.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Looking for some help in creating an ItemFilter for a Targeter
Looking for some help in creating an ItemFilter for a Targeter
Need a examples for creating itemfilter and TargeterFirstHi David,
We can integrate Syncfusion with LightSwitch application, if you want to customize column when create a report using syncfusion reportviewer, since I didn't try this third party
extension before, I think you could consider getting help from
syncfusion forum, more syncfusion experts can help you on this issue.
Thanks for your understanding.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
HI hoping for help pls, laptop was recently repaired& cloned, now will not recognise iphone or ipad, only sees iphone as a camera. Have spent ages trying to reinstall itunes to get so far and for it to fail. TRying desperately to reinstall driver for iphone now , have gotten as far as last steps to find folder in cdrive, found mobile file and there is no driver file at all. Am not the brightest tech lady so any easy to understand tips please am lost and cannot sync either pad or phone.
you have a ps cs4 license for mac and you have some way of finding your serial number.
if yes, download an install the installation file. if you already have the installation file, what is its name and file extension? (eg, if it's one file, it should be a dmg file.)
if you need the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Need help in creating custom crosstab reports
Hello
I need some help in creating custom crosstab reports.
My current report shows the number of events that have occured over the time in a day
The events and the eventdetails are read from the database before being printed on the crosstab
i.e something like this.
Note : there are no events between 3:00-3:59,5:00-5:59;6:00-6:59,7:00-7:59 (not present in the database)
hence not displayed in the reports
*08/07/2009* 01:00 02:00 04:00 08:00 10:00*
Event X 1 1 4 1 3
Event Y 3 3 2 2 1
Total 4 4 6 3 4
So far so good...
Now i have to enhance my reporting application to include the event details which have not happened i.e to include the time details in the crosstab reports where no events have happened
08/07/2009 01:00 02:00 03:00 04:00 05:00 6:00 07:00 8:00 9:00 10:00
Event X 1 1 0 4 0 4 0 1 0 3
Event Y 3 3 0 2 0 2 0 2 0 1
Total 4 4 0 6 0 6 0 3 0 4
I have fell short of ideas this time around to implement such a thing
Any help in this direction is deeply appreciated
Regards
Srivatsa
Edited by: Srivatsa HG on Jul 8, 2009 10:56 AMHi,
It seems that you are having issue with Crystal Report Design.
Post your question in [Crystal Report Design Forum|SAP Crystal Reports;
That forum is monitored by qualified technicians and you will get a faster response there. Also, all Design queries remain in one place and thus can be easily searched in one place.
Regards,
Shweta -
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
Evening folks...looking for some help about my iphone microphone
Evening folks....looking for some help.....I have a 3G Iphone and when I phone people they cannot hear me properly...sound like I am underwater....
Any ideas or suggestions gratelfully accepted..I thought that is what the big deal was that people did not know until they opened the box and started using the iPhone 5, that it not only worked with one carrier but several carriers. I did not say it will work with any carrier at one time. I was trying to find out the reason for this and why people were so surprised that the iPhone 5 had this function and the reason for it. As stated in my post, is it there so that after your contract is up and you want to go to another carrier you do not have to purchase a new iPhone, you cna purchase a SIM card that works with your new carrier.
The Otterbox Defender has a tendency to let too much dirt, dust, etc. in the cracks on the case. At least this has been my expereince. I was thinking something more along some of the really durable cases at BallisticCaseCo.com
As far as the iPhone 5 having issues, I have heard that there were more than usual with the first couple of manufactured batches that were shipped. For example the Map App by Apple, the scratches on the backside of hundreds of iPhones, etc. I am hoping these will get to be less and less, but with the recent riot at the one plant in China where the iPhone 5 is assembled is supposed to increase the waiting time. -
HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphod will not download and my ipad any help would be great.
A lot of people are experiencing it, which suggests that Apple is having issues. If that is the case all people can do is wait it out.
-
Need Help in creating Unix Shell Script for database
Would be appreciable if some one can help in creating unix shell script for the Oracle DB 10,11g.
Here is the condition which i want to implement.
1. Create shell script to create the database with 10GB TB SPACE and 3 groups of redo log file(Each 300MB).
2. Increase size of redolog file.
3. Load sample schema.
4. dump the schema.
5. Create empty db (Script should check if db already exists and drop it in this case).
6. Create backup using rman.
7. restore backup which you have backed up.This isn't much of a "code-sharing" site but a "knowledge-sharing" site. Code posted me may be from a questioner who has a problem / issue / error with his code. But we don't generally see people writing entire scripts as responses to such questions as yours. There may be other sites where you can get coding done "for free".
What you could do is to write some of the code and test it and, if and when it fails / errors, post it for members to make suggestions.
But the expectation here is for you to write your own code.
Hemant K Chitale -
why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.
ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport -
Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance! -
I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?
Okay, I've sussed it. I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine. I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across. Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended. Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list. Hey presto. Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again. Hurray. -
need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200
What are the existing settings iMovie?
Al -
I want to create dynamic ALV report
Hi great abapers,
I want to create dynamic ALV report.Please help me.
Regards,
BillaHi,
Please check the code below:
REPORT YMMR_PALLET_OVERVIEW MESSAGE-ID Y_MESSAGE_0001.
Short description:
To Display and sum up the Quantity of scanned materials on pallet for*
each Shipment number for the Packaging Materials. *
TYPE-POOLS : SLIS.
TABLES: YYLE0003. " Scanned SSCC No.
--Structure Declaration--
Structure for Shipment No. and Date.
TYPES : BEGIN OF T_VTTK_TAB ,
TKNUM LIKE VTTK-TKNUM, " Shipment number
ERDAT LIKE VTTK-ERDAT, " created Date
END OF T_VTTK_TAB .
Structure for Shipment No., Packaging Materials and Date.
TYPES: BEGIN OF T_ITAB2,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P,
ERDAT LIKE YYLE0003-ERDAT, " created Date
COUNT TYPE I,
END OF T_ITAB2.
Structure for Shipment No. and Packaging Materials.
TYPES: BEGIN OF T_ITAB3,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF T_ITAB3.
--Internal table Declaration--
*Internal tables for the above Declared structures
DATA: G_VTTK_TAB TYPE TABLE OF T_VTTK_TAB,
G_ITAB5_TAB TYPE TABLE OF T_ITAB2,
G_ITAB4_TAB TYPE TABLE OF T_ITAB3,
G_ITAB3_TAB TYPE TABLE OF T_ITAB2. "#EC NEEDED
*Internal table Holding Shipment No.and quantity
DATA: BEGIN OF G_TOTAL_TAB OCCURS 0 ,
TKNUM TYPE YYLE0003-TKNUM, " Shipment number
QUANTITY TYPE P,
COUNT TYPE I,
END OF G_TOTAL_TAB .
*Internal table for selection screen data
DATA: BEGIN OF G_SCANDATA_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF G_SCANDATA_TAB.
DATA: BEGIN OF ST_SCANDATA_TAB,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF ST_SCANDATA_TAB.
DATA: BEGIN OF G_SCANDATA_COUNT_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
COUNT TYPE I,
END OF G_SCANDATA_COUNT_TAB.
DATA: L_COUNT TYPE I.
*Internal table for Packaging Materials and quantity
DATA: BEGIN OF G_ITAB6_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF G_ITAB6_TAB.
*- Field catalog
DATA: L_ALV_CAT1_TAB TYPE TABLE OF LVC_S_FCAT.
--Work area Declaration--
DATA: WA_VTTK TYPE T_VTTK_TAB,
WA_ITAB3 TYPE T_ITAB2,
WA_ITAB5 TYPE T_ITAB2,
WA_ITAB4 TYPE T_ITAB3,
WA_ITAB1 LIKE G_SCANDATA_TAB,
WA_ALV_CAT1 LIKE LINE OF L_ALV_CAT1_TAB.
----Variable Defnition -
DATA: G_CUSTOM_CONTAINER_0100 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
G_ALV_GRID_0100 TYPE REF TO CL_GUI_ALV_GRID,
G_CONTAINER_0100 TYPE SCRFNAME VALUE 'LIST',
G_MYLAYOUT TYPE LVC_S_LAYO, "#EC NEEDED
G_WA TYPE REF TO DATA.
DATA: G_VAR TYPE I, " No of records
G_VAR1 TYPE CHAR20. " Variable
--field symbols Declaration--
FIELD-SYMBOLS : <F_FS> TYPE TABLE,
<F_FS3> TYPE ANY,
<F_FS4> TYPE ANY,
<F_FS5> TYPE ANY,
<F_WA> TYPE ANY,
<F_FS15> TYPE ANY,
<F_FS16> TYPE SY-DATUM,
<F_FS2> TYPE T_ITAB2,
<F_FS6> TYPE ANY,
<F_FS7> TYPE ANY,
<F_FS12> TYPE ANY,
<F_FS13> TYPE ANY.
--Selection Parameters--
SELECTION-SCREEN: BEGIN OF BLOCK BLCK01 WITH FRAME TITLE TEXT-000.
"Select options
SELECT-OPTIONS :
S_TKNUM FOR YYLE0003-TKNUM , " Shipment number
S_YYREF FOR YYLE0003-YY_REFERENCE, " Packing reference
S_YYREFT FOR YYLE0003-YY_REFTP, " Reference type
S_EXIDV FOR YYLE0003-EXIDV, " External HU
S_MATNR FOR YYLE0003-MATNR, " Material number
S_VBELN FOR YYLE0003-VBELN, " SD number
S_POSNR FOR YYLE0003-POSNR, " Item number
S_LGTOR FOR YYLE0003-LGTOR, " Door for Wr Hs No
S_VHILM FOR YYLE0003-VHILM, " Packaging Mat
S_YYMEIN FOR YYLE0003-YY_MEINH, " Indicator for UOM
S_QUANTI FOR YYLE0003-QUANTITY, " Quantity
S_YCHECK FOR YYLE0003-YYCHECKED, " Destination_door
S_STATUS FOR YYLE0003-STATUS, " Packing status
S_STASHI FOR YYLE0003-STATUSSHIPTO, " Status on ship-to
S_LOADTR FOR YYLE0003-LOADTRUCK, " Load truck
S_ERDAT FOR YYLE0003-ERDAT , " Date
S_ERZET FOR YYLE0003-ERZET, " Entry time
S_AEDAT FOR YYLE0003-AEDAT, " Last changed on
S_ERNAM FOR YYLE0003-ERNAM, " Name of Person
S_AEZET FOR YYLE0003-AEZET, " Time last change
S_AENAM FOR YYLE0003-AENAM. " Name of person
SELECTION-SCREEN: END OF BLOCK BLCK01.
--INITIALIZATION--
INITIALIZATION.
Clear the variables and workarea
CLEAR :G_VAR,
G_VAR1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1.
--AT SELECTION-SCREEN--
AT SELECTION-SCREEN.
To validate the data entered in selection screen
PERFORM SUB_VALIDATE.
--START-OF-SELECTION--
START-OF-SELECTION.
*To fetch the data from table yyle0003
PERFORM GET_INPUT_DATA.
*To create the Dynamic Field Catalog
PERFORM GET_FIELDCAT.
To populate the data to final table
PERFORM GET_FINAL_DATA.
MODULE status_0100 OUTPUT *
MODULE STATUS_0100 OUTPUT.
*set title bar and PF status.
SET PF-STATUS 'ZVKS'.
SET TITLEBAR 'ZVKS'.
CHECK SY-UCOMM IS INITIAL.
SORT G_SCANDATA_TAB BY TKNUM VHILM.
*Create object for Custom container
CREATE OBJECT G_CUSTOM_CONTAINER_0100
EXPORTING
CONTAINER_NAME = G_CONTAINER_0100
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5.
*Create object for ALV grid
CREATE OBJECT G_ALV_GRID_0100
EXPORTING I_PARENT = G_CUSTOM_CONTAINER_0100.
G_MYLAYOUT-GRID_TITLE = 'Display Scanning data'.
*Call method for table Display
CALL METHOD G_ALV_GRID_0100->SET_TABLE_FOR_FIRST_DISPLAY
CHANGING
IT_OUTTAB = <F_FS>
IT_FIELDCATALOG = L_ALV_CAT1_TAB
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
User Interaction
MODULE USER_COMMAND_0100 INPUT.
CALL METHOD CL_GUI_CFW=>DISPATCH.
*To exit , back or cancel
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form get_input_data
This sub routine will get the data from yyle0003 table.
FORM GET_INPUT_DATA.
CONSTANTS: C_DOT TYPE C VALUE '.',
C_CHAR TYPE C VALUE 'D'.
CLEAR G_SCANDATA_TAB.
Get the data from yyle0003
SELECT VHILM " Packaging Materials
EXIDV " External Handling Unit
TKNUM " Shipment number
QUANTITY " Quantity
FROM YYLE0003
INTO TABLE G_SCANDATA_TAB
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
If VHILM contains any Decimal '.', replace it with D
LOOP AT G_SCANDATA_TAB.
REPLACE C_DOT WITH C_CHAR INTO G_SCANDATA_TAB-VHILM.
IF SY-SUBRC = 0.
MODIFY G_SCANDATA_TAB TRANSPORTING VHILM.
ENDIF.
CLEAR G_SCANDATA_TAB.
ENDLOOP.
*To get the Shipment No Creation date from VTTK.
SELECT TKNUM
ERDAT
FROM VTTK
INTO TABLE G_VTTK_TAB
WHERE TKNUM IN S_TKNUM.
SORT G_SCANDATA_TAB BY VHILM EXIDV. "TKNUM VHILM.
*To get the repeatition of Pacakaging material for each Shipment.
*--- to find the count of packaging materials under each shipment
LOOP AT G_SCANDATA_TAB.
READ TABLE G_SCANDATA_TAB INTO ST_SCANDATA_TAB INDEX SY-TABIX.
AT END OF EXIDV.
L_COUNT = L_COUNT + 1.
MOVE-CORRESPONDING ST_SCANDATA_TAB TO G_SCANDATA_COUNT_TAB.
G_SCANDATA_COUNT_TAB-COUNT = L_COUNT.
CLEAR: ST_SCANDATA_TAB, L_COUNT.
COLLECT G_SCANDATA_COUNT_TAB.
ENDAT.
CLEAR : G_SCANDATA_TAB.
ENDLOOP.
ENDFORM. " get_input_data
*& Form sub_validate
*This subroutine will validate the data eneterd in the selection screen
FORM SUB_VALIDATE.
*Varaiable declaration for Shipment number
DATA: L_TKNUM TYPE YYLE0003-TKNUM."#EC NEEDED " Shipment number
*- Condition will not qualify all primary key (IDENT)
SELECT TKNUM FROM YYLE0003 UP TO 1 ROWS
INTO L_TKNUM "wa_scandata
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
ENDSELECT.
IF SY-SUBRC <> 0.
MESSAGE E987 . " No data found for these selection criterias
ENDIF.
ENDFORM. " sub_validate
*& Form get_fieldcat
Preparing Field catalog
FORM GET_FIELDCAT.
DATA: L_REF TYPE REF TO DATA,
L_I TYPE I. " Variable
CONSTANTS: C_CENTER TYPE C VALUE 'C'. " Center Justified
LOOP AT G_SCANDATA_TAB INTO WA_ITAB1.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB3.
APPEND WA_ITAB3 TO G_ITAB3_TAB.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB4.
COLLECT WA_ITAB4 INTO G_ITAB4_TAB.
*To sum up the qunatity field for each TKNUM.
AT END OF TKNUM.
SUM.
MOVE WA_ITAB1-TKNUM TO G_TOTAL_TAB-TKNUM.
MOVE WA_ITAB1-QUANTITY TO G_TOTAL_TAB-QUANTITY .
APPEND G_TOTAL_TAB.
CLEAR G_TOTAL_TAB.
ENDAT.
CLEAR : WA_ITAB1,
WA_ITAB3,
WA_ITAB4.
ENDLOOP.
*--- Begin of change - SKR.EXT - EBDK986377
SORT G_ITAB4_TAB BY TKNUM.
*--- End of change - SKR.EXT - EBDK986377
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
MOVE-CORRESPONDING WA_ITAB4 TO WA_ITAB5.
MOVE-CORRESPONDING WA_ITAB4 TO G_ITAB6_TAB.
*---- to get the count
READ TABLE G_SCANDATA_COUNT_TAB WITH KEY TKNUM = WA_ITAB5-TKNUM
VHILM = WA_ITAB5-VHILM.
IF SY-SUBRC EQ 0.
WA_ITAB5-COUNT = G_SCANDATA_COUNT_TAB-COUNT.
ENDIF.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
COLLECT G_ITAB6_TAB.
ENDLOOP.
CLEAR : WA_ITAB3.
SORT G_ITAB4_TAB BY TKNUM VHILM.
DELETE ADJACENT DUPLICATES FROM G_ITAB4_TAB COMPARING VHILM.
*To get the Number of fields to be displayed
DESCRIBE TABLE G_ITAB4_TAB LINES G_VAR.
L_I = '3'.
*Field catalog
WA_ALV_CAT1-FIELDNAME = 'TKNUM'(002).
WA_ALV_CAT1-COL_POS = 1.
WA_ALV_CAT1-COLTEXT ='ShipmentNo.'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
WA_ALV_CAT1-FIELDNAME = 'ERDAT'(003).
WA_ALV_CAT1-COL_POS = 2.
WA_ALV_CAT1-COLTEXT ='Creation_Date.'(005).
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
Create field catalog for each of VHILM
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
IF G_VAR >= 1.
CONDENSE WA_ITAB4-VHILM NO-GAPS.
WA_ALV_CAT1-FIELDNAME = WA_ITAB4-VHILM. "l_fieldname.
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = WA_ITAB4-VHILM.
WA_ALV_CAT1-JUST = C_CENTER. "'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
L_I = L_I + 1.
ENDIF.
*TOTAL-last column in the field catalog
AT LAST.
WA_ALV_CAT1-FIELDNAME = 'TOTAL'(004).
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = 'TOTAL'(004).
WA_ALV_CAT1-JUST = C_CENTER. " 'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
ENDAT.
SORT L_ALV_CAT1_TAB BY FIELDNAME.
*Non of the field name should not get repeated
DELETE ADJACENT DUPLICATES FROM L_ALV_CAT1_TAB.
ENDLOOP.
SORT L_ALV_CAT1_TAB BY COL_POS.
*Creating Dynamic Internal table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = L_ALV_CAT1_TAB
IMPORTING
EP_TABLE = L_REF.
Assigning the Dynamic field Catalog to field symbol.
ASSIGN L_REF->* TO <F_FS>.
CREATE DATA G_WA LIKE LINE OF <F_FS>.
ASSIGN G_WA->* TO <F_WA>.
DELETE ADJACENT DUPLICATES FROM <F_FS> COMPARING ALL FIELDS.
ENDFORM. " get_fieldcat
*& Form display_data
FORM GET_FINAL_DATA.
*variable declaration
DATA: L_TOTAL TYPE I, " Row wise total
L_FILL TYPE I, " Count
L_TOT TYPE I. " Grand total
*To get the TOTAL qunatity in the last line of out put.
LOOP AT G_ITAB6_TAB.
CLEAR WA_ITAB5.
WA_ITAB5-TKNUM = 'TOTAL'(004).
WA_ITAB5-ERDAT = SPACE.
MOVE-CORRESPONDING G_ITAB6_TAB TO WA_ITAB5 .
LOOP AT G_SCANDATA_COUNT_TAB WHERE VHILM = G_ITAB6_TAB-VHILM.
WA_ITAB5-COUNT = WA_ITAB5-COUNT + G_SCANDATA_COUNT_TAB-COUNT.
ENDLOOP.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
CLEAR WA_ITAB5.
ENDLOOP.
DESCRIBE TABLE G_ITAB5_TAB LINES L_TOT.
*>>>>>>>>
****To get total qunatity of all TKNUM
LOOP AT G_TOTAL_TAB .
L_TOTAL = L_TOTAL + G_TOTAL_TAB-QUANTITY.
ENDLOOP.
*>>>>>>>>
*To assign ERDAT to g_itab5_tab
LOOP AT G_ITAB5_TAB INTO WA_ITAB5 .
READ TABLE G_VTTK_TAB INTO WA_VTTK WITH KEY TKNUM = WA_ITAB5-TKNUM.
IF SY-SUBRC = 0.
WA_ITAB5-ERDAT = WA_VTTK-ERDAT.
MODIFY G_ITAB5_TAB FROM WA_ITAB5 TRANSPORTING ERDAT.
ENDIF.
ENDLOOP.
*Assigning value in each field to respective Field symbols.
LOOP AT G_ITAB5_TAB ASSIGNING <F_FS2>.
CLEAR G_TOTAL_TAB-QUANTITY.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_FS2> TO <F_FS6>.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_WA> TO <F_FS7>.
<F_FS7> = <F_FS6>.
CONDENSE <F_FS2>-VHILM NO-GAPS.
ASSIGN COMPONENT 'VHILM' OF STRUCTURE <F_FS2> TO <F_FS3>.
ASSIGN COMPONENT 5 OF STRUCTURE <F_FS2> TO <F_FS4>.
MOVE <F_FS3> TO G_VAR1.
ASSIGN COMPONENT G_VAR1 OF STRUCTURE <F_WA> TO <F_FS5>.
<F_FS5> = <F_FS4>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_FS2> TO <F_FS16>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_WA> TO <F_FS15>.
WRITE <F_FS16> TO <F_FS15> .
Inorder not to display the date '00/00/000',
if there is no DATE .
IF ( <F_FS15> CP '00/*' )
OR ( <F_FS15> CP '00.*' )
OR ( <F_FS15> CP '00-*' ).
<F_FS15> = SPACE.
ELSEIF ( <F_FS15> CO ' / /' )
OR ( <F_FS15> CO ' . .' )
OR ( <F_FS15> CO ' - -' ) .
<F_FS15> = SPACE.
ENDIF.
READ TABLE G_TOTAL_TAB WITH KEY TKNUM = <F_FS6>.
IF SY-SUBRC = 0.
ASSIGN G_TOTAL_TAB-QUANTITY TO <F_FS12>.
ASSIGN COMPONENT 'COUNT' OF STRUCTURE <F_FS2> TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS13> + <F_FS12>.
L_TOTAL = L_TOTAL + <F_FS12>.
ENDIF.
L_FILL = L_FILL + 1.
IF L_FILL = L_TOT.
ASSIGN L_TOTAL TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS12>.
ENDIF.
AT END OF <F_FS2>-TKNUM.
APPEND <F_WA> TO <F_FS>.
CLEAR <F_WA>.
ENDAT.
ENDLOOP.
CLEAR: <F_FS6>,
<F_FS7>,
<F_WA>.
*Call the screen where Custom container is defined
CALL SCREEN 0100.
ENDFORM. " display_data
Regards
Kannaiah -
When we create any EVDRE report for any application getting an error
Hi Experts,
When we create any EVDRE report for any application getting an error
EVDRE encountered an error retrieving data from the web server.. We also
tried creating EVDRE report on the APP SET/RATE application still getting the same error. All the cell base reporting are working. We are on the latest patch. the server and the client machine.
1) BPC Version : 7.0 MS (7.0.115.06)
2) SQ L Server 2005 SP3
3) Office 2007 with latest support packs
4) It is happening since the install
5) All users are getting the same error. Tried from two different PCs,
same issue. also tried the Install (ADM id) and also the ids created. All
ids are having this issue.
6) Single Server environment.
Please send reply as soon as possible.
Regards,
Arjun.Hi,
There are many many SAP notes existing on the same subject.
I would recommend you to go through them. You will potentially find the solution for your problem.
Some examples of SAP notes: 1242648, 1395993, 1453433, 1439155, 1439100.
Hope this will help.
Best Regards,
Patrick -
Creating a Crystal Report for B1 without parameters
Hi Experts,
My question is a simple one.
I create a crystal report for SAP B1 8.8 Patch 10 using CR 2008 SP02.
I have no parameters since its showing sales figures of the past month.
But when I run the report in SAP, a selection criteria screen pops up without any fields.
Just OK and Cancel.
I dont want my users to have to click OK. I need the report to pop-up once the user click on the SAP Menu for the report.
My report file has no parameters.
Thanks for the help
DenisDeinis,
In your report, do you mean:
- you have parameter created, but not used in the report? OR
- there is no parameter field in the report at all?
The reason I am asking is:
If you have parameter fields, But, you did not use it in the report, I think when you run the report within SAP B1, it will still prompts for user to enter something.
Also, if you are using subreport, make sure there is no parameter in the subreport, Although you do not use them. Just delete the parameter field from the list if you are not using them.
Edited by: Shwu Hua Gan on Jun 20, 2010 2:59 AM
Maybe you are looking for
-
CS5.5 Gripes/CS6 Wish List (from the perspective of an FCP switcher)
I have been a Final Cut Pro user for more than 10 years (starting with version 1.2 on a 500 MHz G4). Final Cut Pro X is a disaster, but that’s a well-covered topic for a different forum. After experimenting with Premiere Pro CS5.5 for a few months,
-
Install PIXMA MG5320 on my second computor with windows 8 software/ .printer drive already in use.
I installed the printer on my wifes computor without and issues. Now I am attempting to install it on my computor. I am getting blocked in the installation point where you select all the software needed . when i hit ok it goes into the install mode b
-
Text field contents overlap the static text below.
hi all, I have got a problem with the size of a text field in my form. In the form, below the text field, i have got a static text. The height of the text field varies dynamically depending on the size of the string coming from the backend. Now, as t
-
How do i measure bipolarforAgilent E3631A ?
Hello, i am new in using labview . Can any one please help me how to measure bipolar Agilent E3631E ? My goal is to sweep the output of E3631E voltage supply from -25 to 25 V on the I-V plot. Since I already made the i-v curve from 0 to 25V or other
-
Creating email account in mailserver
how to create email account in the mailserver when user selects signup button?he can also edit password and ask if forget password?how normally ppl do this?What if aacount already exist.Do we use script to execute the cmd?