Looking for the parameter/command line to supply the license key during the installation of Adobe Captive CS6 application.

Hello - We are performing customize installation for Captive CS6 with the help of AAMEE tool. We have couple of licenses which we wish to supply over the installation command line during deployment. However we did not find any parameter or the command line which will allow us to enter the license key during installation. Has any one succeed in finding the command line where we can pass the license key during installation of this application?
Thanks.

Can you post the last bit of your log file? 100 or so lines should be plenty to see what's going wrong.

Similar Messages

Looking for a programmatic/command line approach to auditing registry changes

http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/regedit_audit_key.mspx?mfr=true
I'm looking to enable auditing on registry keys, but not have the user have to manually go through this process. Can you do this via command line or something? I'm trying to write this into my program, and I need it to set auditing on certain registry keys.

Hi,
In addition, we might enable the following audit group policy settings to audit registry changes:
Global Object Access Auditing
Under computer configuration/ Windows Settings/Security Settings/Advanced Audit Policy Configuration/
For more information regarding Global Object Access Auditing, please see:
Registry (Global Object Access Auditing)
Global Object Access Auditing is Magic
Best regards
Michael Shao
TechNet Community Support

How do I restart the SNMP agents with the original command line options?

I'm creating an application that changes the SNMP trap target configuration files and then restarts the SNMP agent. I'm currently working with the mibiisa agent. I want to make sure that I restart the service with the new trap targets but with the original command line options. How can I restart the mibiisa service with the same command line options that it originally loaded with?

It is not "Network Time" that is the problem, but actually "SystemStarter." SystemStarter is an interim kludge to enable the work or the old StartupItems until they can be converted to LaunchDaemons or LaunchAgents controlled by launchd. Launcd calls SystemStarter to launch all the unconverted StartupItems. ntpd is now under the control of launchd directly.
Launchctl is the command to load and unload the plist files, but I don't think it has a mechanism to restart a daemon.
There are start and stop commands in launchctl, but the man page indicates that they are for debugging purposes.
I also imagine you could just kill the ntp daemon and let it restart with new settings. It is most likely set to "keepAlive" so that it will automatically restart.

We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a

We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

This is the Acrobat.com forum. Your question will have a much better chance being addressed in the Acrobat SDK forum.

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

How to pass multiple words as a search argument on the Acrobat Command Line?

I am trying to launch Acrobat using a multi-word search parameter on a Windows XP box. However, Acrobat is stripping the spaces between words. For example, I am trying to load Acrobat and have it search for the phrase "vision changes" using a Command Line like this:
C:\>"C:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe" /A search="vision changes" c:\temp\theDocument.pdf
When Acrobat loads, it shows the search panel with the phrase "visionchanges" in it. The space between the two words is gone and naturally it can't find the phrase.
I have read both the PDF Command Line parameter documents I could find. This format works fine for URLs, but for Shelling Acrobat on the local system, it doesn't work because of the space stripping problem. I have tried lots of different variants of quote characters, escape characters, even HTML characters like "&nbps;", but nothing works.
Does anyone have an answer?
For the curious here are links to the two PDF documents I found that cover the command line arguments:
http://www.adobe.com/devnet/acrobat/pdfs/PDFOpenParameters.pdf
http://www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Thanks,
Robert

Hey Robert,
Did you note that in the "pdf_open_parameters.pdf" document, it says that the value of the Search parameter is treated as a list of (single) words, not as a string of words (phrase)?
It says it explicitly: "You can search only for single words. You cannot search for a string of words."
PS: I'm replying to your query as a sort of thank you for posting the links to those documents. It helped me to find the way of conditioning how to open a pdf.

Unable to run reports from the unix command line

hi
all of a sudden i am unable to run reports ( on App server 10g) either from the unix scripts or from the unix command line. But i can run them from the forms.
Any one have any idead about this.
Thank you

thanks all for replying
i have set the env variables for the session and it worked. Looks like i have to set the oracle_home and ld_library_path every time ( opening a new putty session) i call sqlldr.
But in a whole i am trying to run sql loader from the forms. Right now we have Oracle app server 10g which forms 10g version. As oracle app server 10g didnt come with sqlldr, we are copied the sqlldr of database on to app server with different home. after this we can run sqlldr ( on app server ) from unix scripts but not from Forms. Then we opened a qurey with oracle about app server 10g not commig with sqlldr and its remedy . But they said that they dont have specific remedy for that and suggested the same what we did.
So we came up with java package which does the same funtion as host command and trying to run sqlldr which is on the database( ie replacing the host command in the forms with the database funtion). By using that funtion i am able to run the sqlldr from sql plus but not from forms. I couldnt easily debug it as i wont through any error messages.
Any one have any idea of this ...
Thank you

How to locate 'look for apple tv' command in iTunes

i am trying to connect first generation apple tv to mac mini.
following all instructions but apple tv does not appear in itunes devices list.
cannot find how to configure itunes for 'look for apple tv' command.

That depends on how you set it all up. If you chose the "connect to iTunes" option then you should be able to sync content to the hard drive on the Apple TV. If you chose the "add shared library" option then you can only stream to the Apple TV.

Command line authentication "/ap" is not working on the Mac

I am trying to connect to my media server using the Mac version of FMLE, but my server has authentication and I cannot connect to it using the command line. I use the /ap command line option with the username:password string, it works on Windows, but not on the Mac.
Do anyone else have this problem? If someone made it work somehow using command line authentication, could you please tell me how you made it work? Thank you.

It's working for me.
Are you using the right credentials? What's the error fmle gives?

How to Invoke tasks created in FrameMaker Publishing Server from the Windows command line

Hi All ,
i would like to know how can we Invoke tasks and schedules created in FrameMaker Publishing Server from the Windows command line.
we used publishing server mainly to convert Frame maker files into PDF and that should be do progarmatically without manual intervention on Demand.
so could you please let us know how can i invoke rthe task creted to convert FM file to PDF in FrameMaker Publishing Server from the Windows command line.
please let me know the command to execute .
thank you and waiting for valuable response.
best regards
Ramesh babu

Please see http://blogs.adobe.com/techcomm/2011/03/adobe-framemaker-server-10-and-its-command-line-ca pability.html for the same.
Harish Dhawan

Command Line argument is not valid please verify the switch.......???

hello frends
We are currently getting this error.
Command Line argument is not valid please verify the switch.
The code used to send the mail is
mail ="mailto:?subject="+escape(subject)+"&body="+escape(email);
document.location = mail;
return ;
this is a javascript code to open outlook mail to send emails.
the main problem is,when we write
mailto:?subject=abc&body=uvwxyz......
then we should be getting abc as subj and uvwxyz as the body..,and we r getting it....
but when we include ""(double quotes ) in either the subject or the body..,it is showing the error line mentioned above.
and if em using the html tags in the body part..,it's giving everything including the tags,which z not desired.
kindly help me .....

shikha6g wrote:
i've thought..,you people are brainy enough to help me out in the javascript too...!!so..,i relied on this forum and have posted my problem,coz solving this thing was really imp for me.
i din't knew,dat i'll get such circastic replys here.sorryTo me, being brainy implies that you are a smart thinker and good at problem solving. It doesn't mean that you know a language that you never learned.

How to compile an .air app from the ADT command line?

Hi,
I would like to compile an .air app from the ADT command line.
Does anybody have an example?
I don't know how to add the AIR SDK path and a folder to it.
Is there a generator for the command line availabble?
Thanks

Correction: it seems that Applescripts and some similar scripts can be called from the command line using "osascript scriptname". I don't speak automator but you might like to try it. osascript seems to come with severe limitations though, for instance it doesn't allow user interaction such as dialogue boxes.

The -profile command line switch is not passed to the windows 7 jumplist properly.

I start Firefox with a shortcut like this one: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe -no-remote -profile SomeProfileButNotTheDefaultOne -win7appid SomeUniqueAppId".
When pinning to the Windows 7 taskbar, the jumplist items "New Tab" and "New Window" ignore the given command line parameter -profile and open a new tab or window with the default profile instead of the given one.
The program itself handles the parameters correctly; alas, the jumplist entries do not. Is there any way to convince the jumplist to use the given command line parameters as well?

As I said: "The program itself handles the parameters correctly." -profile (lowercase) itself works fine. Apperently the jumplist ignores ''any'' command line parameter but starts a new process with the "-browser" parameter.

(sqr 2515) input required user interaction but user interaction was disabled by the -XI command line

hi ,
i'm getting below while running sqr in 3-tier mode using process scheduler.
(sqr 2515) input required user interaction but user interaction was disabled by the -XI command line
can any one suggest me to resolve this problem

You should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package.

Using a variable for a whole command line

Hi,
Is it possible to put that commandline:
Execute-MSI -Action Install -Path "$Var_SourceFiles\$($Itemvar_Setup_Parameter[0])" -transform $Itemvar_Setup_Parameter[1] `
-Parameters $Itemvar_Setup_Parameter[2]`
-LogName "$var_PackageLongName"
in a single variable and then just run the variable instead of writing the whole command line?
Thanks,

You can put in a script file and call the script.
.\myscript.ps1
You canput it in a variable like this:
$sb=[scriptblock]::Create('Execute-MSI -Action Install -Path $Var_SourceFiles\$Itemvar_Setup_Parameter[0] -transform $Itemvar_Setup_Parameter[1] -Parameters $Itemvar_Setup_Parameter[2] -LogName $var_PackageLongName')
$sb.Invoke()
You cannot pu tit in a variable and run it except.
Your command also leaves a lot to be desired in a PowerShell session.
¯\_(ツ)_/¯

Looking for the parameter/command line to supply the license key during the installation of Adobe Captive CS6 application.

Similar Messages

Maybe you are looking for