Loops appear twice in the loop browser. Huh?

I just installed iLife '06 and have been "messing around" with the various programmes. One thing I noticed was that exactly the same loops appear twice in the loop browser. Not all loops are doubled, which is obviously what is confusing me. Is this normal (not my confusion!!)?
I've checked the folder in the library and each loop is only available once, but GarageBand insists on having two of quite a number of loops. Any tips would be greatly appreciated, as I haven't found any way to delete just one of the loops (deleting the file obviously deletes both . . .)
Thanks in advance,
Steve
G5 Dual 2.3, G4 Powerbook   Mac OS X (10.4.3)  

Do you really have only one copy of each? Do a Finder/Spotlight search. There are several places where the loops could show up:
- the general Library/Audio folder
- the user Library/Audio folder
- the general Library/Application Support folder
- the User Library/Application Support folder
Did you install over an old version of GB? That might explain the duplicate loops. And the "single" loops that were either part of your old installation and not of GB3 or vice versa.
In order to repair that, you should trash the duplicate loops and the content of the Loops Index folder and then drag the remaining loops into the loop browser.

Similar Messages

  • Apple loop listed twice in the loop browser

    Can someone tell me why my apple loops are being listed twice in the loop browser?

    I actually need help here too. Mine are listed twice but it is because they are on my drive in two places
    Library>Application Support>GarageBand>Apple Loops>Apple Loops for GarageBand
    And also here
    Library>Audio>Apple Loops>Apple>Apple Loops for GarageBand
    Can I toss one of these or does GarageBand and Logic need to see these in different places?

  • Imported loops are missing in the loop browser

    I have been having this problem ever since I purchased my mac last September. I tried upgrading to iLife '05 and Garageband 2 to try and fix the problem to no avail. I have checked (and doublechecked) the loop indexes for Garageband. There are three of them. The first is for the original loops included in Garageband. Then there is the single loops folder. Finally, there is the loop index of my Soundtrack Loop library that I am trying to import. I should note, here as well that it HAS successfully indexed the entire Soundtrack Loop library. Even the loops that don't show up in the loop browser are accounted for in the loop index. Also, I have confirmed that all of the actual files are where they are supposed to be, referenced to by the index. I have tried reinstalling Garageband 2 twice, and found no change. Any other advice in this realm would be hot.
    Thanx,
    Ben

    That's correct, 2 semitones. And of course you don't turn off the keyword browsing with this checkbox, you can still browse the loops by keywords. You turn off the "filter for better results" that doesn't show you the loops that are more than those 2 semitones away from the key that you set for your song. What you can't turn off is that the loop browser only shows you loops that match the measure of your song - so you get very few when you use an exotic measure.

  • How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?

    How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?
    All I need is ONE INBOX (like Windows Mail used to do) ...
    I can see in the 'Account' column of each message which email account it's using.
    Then, I either junk or read the message, followed by delete or file to one of my created folders.
    As it is, half my page is depth is taken up by 12 lines of Account names !!!

    That still leaves SIX lines of Account names down the side. All I want is ONE INBOX ... (I can see which account each message belongs to in the 'Account' column...)

  • Why report section is appearing twice in the output of report designer

    Hi Gurus,
    I have created a report in the report designer and my report contains 5 sections.
    each report section is one query view.
    i inserted all the query views and done some formatting .
    but when i executed the report , one of the report section is appearing twice in the output.
    ex: i need the output like this
    section1
    section2
    section3
    section4
    section5
    But the output i am getting is as follows.
    section1
    section2
    section3
    section3
    section4
    section5
    report designer experts can please let me know why this problem is coming and also please provide possible solution for this.
    Thanks in advance.
    Raj.

    Hi Gurus,
    I have created a report in the report designer and my report contains 5 sections.
    each report section is one query view.
    i inserted all the query views and done some formatting .
    but when i executed the report , one of the report section is appearing twice in the output.
    ex: i need the output like this
    section1
    section2
    section3
    section4
    section5
    But the output i am getting is as follows.
    section1
    section2
    section3
    section3
    section4
    section5
    report designer experts can please let me know why this problem is coming and also please provide possible solution for this.
    Thanks in advance.
    Raj.

  • OutputLabes, values in selectOneChoice are appearing twice in the jspx page

    Hi All,
    In a Jspx Page, there are two menu tabs. Each Tab has a PanelForm and each panelform has certain components.
    By default the first panelform in the first tab will be shown on page load and while clicking on second tab, the second panelform will be shown.
    The first panelform has three selectonechoices and three command buttons.
    If i click on reset button, these 3 selectonechoices are set to null by backing bean.
    Here comes the problem, after clicking on reset, if you click on second tab where the second panel form available, certain components like outputLabel and the values in selectOnechoice, are appearing twice on the page.
    Can anyone suggest me how to get rid of this problem..
    Here is my Jspx Page..
    <?xml version='1.0' encoding='windows-1252'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
    xmlns:h="http://java.sun.com/jsf/html"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:af="http://xmlns.oracle.com/adf/faces"
    xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
    <jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
    doctype-system="http://www.w3.org/TR/html4/loose.dtd"
    doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
    <jsp:directive.page contentType="text/html;charset=windows-1252"/>
    <f:loadBundle basename="GeneralAdmin" var="gadmin"/>
    <f:loadBundle basename="HoldCapabilites" var="holdc"/>
    <f:view>
    <afh:html>
    <afh:head title="editManualProfileAttributes">
    <meta http-equiv="Content-Type"
    content="text/html; charset=windows-1252"/>
    <script type="text/javascript">
    function cancel() {
    var flag = false;
    flag=window.confirm('You want to discard the entered data');
    return flag;
    </script>
    </afh:head>
    <afh:body>
    <af:messages/>
    <h:form>
    <afh:tableLayout>
    <afh:rowLayout width="100%">
    <jsp:include page="/jsps/webutils/template/header.jsp"/>
    </afh:rowLayout>
    <afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:menuPath>
    <af:commandMenuItem text="#{gadmin.admin}" action="adminHome"/>
    <af:commandMenuItem text="#{gadmin.epaAttr}" selected="true"/>
    </af:menuPath>
    </afh:rowLayout>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:objectSpacer width="10" height="20"/>
    </afh:rowLayout>
    <afh:rowLayout halign="center" valign="bottom">
    <afh:cellFormat width="20%" height="20px" valign="bottom">
    <af:menuTabs>
    <af:commandMenuItem text="#{gadmin.epAttr}"
    action="#{EditManualProfileAttributes.firstTab}"
    binding="#{EditManualProfileAttributes.commandMenuItem2}"
    id="commandMenuItem2"/>
    <af:commandMenuItem text="#{gadmin.auditHistory}"
    action="#{EditManualProfileAttributes.secondTab}"
    binding="#{EditManualProfileAttributes.commandMenuItem1}"
    id="commandMenuItem1"/>
    </af:menuTabs>
    </afh:cellFormat>
    <afh:cellFormat styleClass="bottomLine" width="80%"
    height="20px" valign="bottom">
    <af:objectSpacer height="1" width="1"/>
    </afh:cellFormat>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:objectSpacer width="100%" height="10"/>
    </afh:rowLayout>
    <af:panelForm id="panelForm1" width="100%"
    binding="#{EditManualProfileAttributes.panelForm1}">
    <afh:rowLayout width="100%">
    <afh:cellFormat width="15%">
    <af:outputText value="#{gadmin.mpAttr}"
    inlineStyle="font-family:Arial; font-size:9.0pt; font-weight:bold;"/>
    </afh:cellFormat>
    <afh:cellFormat width="85%">
    <f:verbatim>
    <hr align="left"
    style="border-width:2.0px; color:rgb(219,238,243);"/>
    </f:verbatim>
    </afh:cellFormat>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:objectSpacer width="10" height="20"/>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <afh:cellFormat width="5%"/>
    <afh:cellFormat width="15%">
    <af:outputText value="#{gadmin.refName}"
    styleClass="outputText"/>
    <af:outputText value=" * "
    inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
    </afh:cellFormat>
    <afh:cellFormat width="80%">
    <af:selectOneChoice id="navList1" autoSubmit="true" partialTriggers="commandButton2"
    valuePassThru="true" unselectedLabel="Select"
    binding="#{EditManualProfileAttributes.navList1}"
    valueChangeListener="#{EditManualProfileAttributes.getDetails}">
    <af:forEach var="li"
    items="#{bindings.GetRefNamesVO1.rangeSet}">
    <af:selectItem label="#{li.ReferenceName}"
    value="#{li.Id}"/>
    </af:forEach>
    </af:selectOneChoice>
    </afh:cellFormat>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:objectSpacer width="10" height="10"/>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <afh:cellFormat width="5%"/>
    <afh:cellFormat width="15%">
    <af:outputText value="#{gadmin.refId}"
    styleClass="outputText"/>
    <af:outputText value=" * "
    inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
    </afh:cellFormat>
    <afh:cellFormat width="15%">
    <af:selectOneChoice id="navList2" autoSubmit="true"
    partialTriggers="navList1 commandButton2"
    binding="#{EditManualProfileAttributes.navList2}"
    valueChangeListener="#{EditManualProfileAttributes.getColumns}">
    <af:forEach var="li"
    items="#{bindings.LookupRefTableVO1.rangeSet}">
    <af:selectItem label="#{li.LookupDesc}"
    value="#{li.LookupId}"/>
    </af:forEach>
    </af:selectOneChoice>
    </afh:cellFormat>
    <afh:cellFormat width="15%">
    <af:selectOneChoice id="navList3"
    binding="#{EditManualProfileAttributes.navList3}"
    partialTriggers="navList1 navList2 commandButton2">
    <af:forEach var="li"
    items="#{bindings.EditRefColumnVO1.rangeSet}">
    <af:selectItem label="#{li.DetailDesc}"
    value="#{li.DetailsId}"/>
    </af:forEach>
    </af:selectOneChoice>
    </afh:cellFormat>
    <afh:cellFormat width="50%"/>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:objectSpacer width="10" height="10"/>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <afh:cellFormat width="5%"/>
    <afh:cellFormat width="6%">
    <af:outputText value="#{gadmin.stDt}"
    styleClass="outputText" id="outputText1"
    binding="#{EditManualProfileAttributes.outputText1}"/>
    </afh:cellFormat>
    <afh:cellFormat halign="left">
    <af:outputText value=" * " id="outputText2"
    binding="#{EditManualProfileAttributes.outputText2}"
    inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
    </afh:cellFormat>
    <afh:cellFormat width="4%"/>
    <afh:cellFormat width="80%">
    <af:selectInputDate id="startDate"
    binding="#{EditManualProfileAttributes.startDate}"
    partialTriggers="navList1 commandButton1 commandButton2">
    <af:convertDateTime pattern="dd/MMM/yy"/>
    </af:selectInputDate>
    </afh:cellFormat>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:objectSpacer width="10" height="10"/>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <afh:cellFormat width="5%"/>
    <afh:cellFormat width="15%">
    <af:outputText value="#{gadmin.edDt}"
    styleClass="outputText" id="outputText3"
    binding="#{EditManualProfileAttributes.outputText3}"/>
    </afh:cellFormat>
    <afh:cellFormat width="80%">
    <af:selectInputDate id="endDate"
    binding="#{EditManualProfileAttributes.endDate}"
    partialTriggers="navList1 commandButton1 commandButton2">
    <af:convertDateTime pattern="dd/MMM/yy"/>
    </af:selectInputDate>
    </afh:cellFormat>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:objectSpacer width="10" height="10"/>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <afh:cellFormat width="20%"/>
    <afh:cellFormat width="7%">
    <af:commandButton text="#{gadmin.save}"
    action="#{EditManualProfileAttributes.save}"
    id="commandButton1"
    binding="#{EditManualProfileAttributes.commandButton1}"/>
    </afh:cellFormat>
    <afh:cellFormat width="7%">
    <af:commandButton text="#{gadmin.reset}"
    action="#{EditManualProfileAttributes.reset}"
    id="commandButton2"
    binding="#{EditManualProfileAttributes.commandButton2}"/>
    </afh:cellFormat>
    <afh:cellFormat width="7%">
    <af:commandButton text="#{gadmin.cancel}"
    id="commandButton3"
    binding="#{EditManualProfileAttributes.commandButton3}"
    action="adminHome"
    onclick="return cancel()"/>
    </afh:cellFormat>
    <afh:cellFormat width="59%"/>
    </afh:rowLayout>
    </af:panelForm>
    <af:panelForm id="panelForm2" rendered="false" width="100%"
    binding="#{EditManualProfileAttributes.panelForm2}">
    <afh:rowLayout width="100%">
    <afh:cellFormat width="15%">
    <af:outputLabel value="#{holdc.mpaAttr}" id="abc"
    inlineStyle="font-family:Arial; font-size:9.0pt; font-weight:bold;"/>
    </afh:cellFormat>
    <afh:cellFormat width="85%">
    <f:verbatim>
    <hr align="left"
    style="border-width:2.0px; color:rgb(219,238,243);"/>
    </f:verbatim>
    </afh:cellFormat>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <af:objectSpacer width="10" height="20"/>
    </afh:rowLayout>
    <afh:rowLayout width="100%">
    <afh:cellFormat width="15%">
    <af:outputLabel value="#{holdc.refeName}"
    styleClass="outputText"/>
    <af:outputLabel value=" * "
    inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
    </afh:cellFormat>
    <afh:cellFormat width="85%">
    <af:selectOneChoice id="navList4" autoSubmit="true"
    unselectedLabel="Select"
    valuePassThru="true"
    binding="#{EditManualProfileAttributes.navList4}"
    valueChangeListener="#{EditManualProfileAttributes.getVersions}">
    <af:forEach var="li"
    items="#{bindings.AuditRefNamesVO1.rangeSet}">
    <af:selectItem label="#{li.ReferenceName}"
    value="#{li.Id}"/>
    </af:forEach>
    </af:selectOneChoice>
    </afh:cellFormat>
    </afh:rowLayout>
    </af:panelForm>
    </afh:tableLayout>
    </h:form>
    </afh:body>
    </afh:html>
    </f:view>
    </jsp:root>

    Hi Puthanampatti,
    Thanks a lot for your reply, but i am using JDev 10.1.3.3. There is no panelFormLayout component and i am not using that component.
    Even i am strange this duplicating of components and values in selectoneChoice occuring from past 2 days in the old file. I am wondering whether my file got corrupted by any sort.
    Regards,
    R N V Prasad

  • GL account is appearing twice in the report

    Hi Xperts,
    We have a report in that particular report we can see the Balances of TOTAL COST OF SALES,Total wages & salaries,Total other staff costs,Total designing & merchantiging, Total selling, Total Depriciation,Total Distribution & TOTAL SUNDRY & GENERAL .
    It is a customised report.
    I am new to reports.
    In the above report one GL account is appearing twice (The acct name SMALL DIFFERENCES ACCT) in the section of  TOTAL COST OF SALES    &     TOTAL SUNDRY & GENERAL
    Why it is appearing twice?
    Pls. help me.
    Thanks in Advance

    You have not mention that which report like Z report or standard one.
    However, if it is Z report, the GL may be grouped twice in the report. and ask your ABAP team to find from where it is getting value. So that, it is easy to track why it is appearing twice in the report.
    If it is standard report, check your FSV for the correct grouping.
    Rgds
    Satheesh Vallepu

  • A Characteristci appears twice under the Rows Column on the left hand side.

    Hi All,
    According to the requirement , there are 2 Material Numbers ,1 of them is used for Compounding,which is not required in the Report,but as it is used for Compounding ,we need to place that in the rows.
    We have put tat in "NO DISPLAY" mode,but  Material Number appears twice under the Rows  column, on the left hand side of the screen, in the Portal when we execute the Report.How Can we have to display only 1 Material Number on the left hand side of the screen?
    Thanks in Advance,
    Sravani

    the left hand side of the screen is reakky vague....you should be more specific...
    Probably you need to filter out the compounding characteristics in the global filter area.
    Thanks...
    Shambhu

  • (No notification) word appears twice on the notification center of my iPhone 6 plus

    (No notification) word appears twice on the notification center of my iPhone 6 plus

    Try a reset.
    Hold the on/off and home buttons together for about 10 seconds until the Apple logo appears.

  • I am using QuickTime 7 Pro and want to loop my video.  The Loop function is grayed out.  Why?  How can I loop my video?

    I am using Quicktime 7 Pro on a Max Mini to play my video on a gallery monitor.  Under View, the Loop option is grayed.  Why?  I need to play the video in a continuous loop all day.  Thank you.

    Loop appears to be "broken" in QuickTime Player Pro and 10.7.4.
    It's been fixed in 10.8 and also works in QuickTime 10, 10.1 and 10.2.
    Use 10.1 on your machine if you need to loop your playback.

  • What is the best way to loop a sound where the loop is a subsection

    I have a sound file, and I am supposed to loop a middle section of the sound, i don't see any way in soundengine to do this. What is the easiest way to loop an MP3 background sound where the beginning is to played once. if I load two sounds and then play both of them they will overlap, yes? I know the time of the loop point, but wonder if there is a way to make it a really perfect loop, with no pauses, gaps or clicks.

    I'm not at my Mac right now so I can't give specifics but SoundEngine allows you to specify attack and decay components to a looping background track. In your case you would specify the beginning section as the attack component and the middle (looping) section as the primary component.
    Craig

  • Favorite themes appear twice in the Themes window

    Whenever I save a theme as a favorite, it appears twice in my Themes window. When I click on each duplicate instance of any given theme in the Themes window, it seems to produce the same result, so operationally it's not a problem. Still, it's a nuisance to have to scroll through twice as much stuff to find what I want, and it doesn't seem right that each favorite should appear twice.
    I've searched my drive for two instances of each .favorite file, but I can only find one instance, located in *~/Library/Application Support/iDVD/Favorites*.
    I tried trashing the preferences file, but when I re-opened iDVD, I got the following prompt:
    +*Project Duration*+
    +Your project exceeds the maximum content duration. To burn this project, remove some content.+
    That's nonsense. I had already "burned" (saved) the project to a disk image, and it burned just fine. Besides, the project is shorter than other projects I've burned with no problem. The upside of having replaced the preferences file is that the double instances of my favorite themes were gone.
    I had saved the old preferences file, so I restored that and trashed the new one. That got rid of the bogus Project Duration message, but now I'm back to double instances of my favorite themes again. There is definitely something screwy going on with iDVD.
    Can anyone help?
    Thanks!

    Never mind...I solved it. When you trash the preferences file and iDVD creates a new one, it automatically selects "Best Performance", which naturally increases the filesize of the disk image file. It's sufficient to just acknowledge the Project Duration message and then go into Preferences:Projects and change the Encoding to "Best Quality". That fixes project duration problem.
    Actually, there's a far more serious problem with "missing themes", but that will be the subject of another thread if the complete reinstall of iDVD I'm doing now doesn't solve it. Grrrrr......

  • Last value from a loop and values inside the loop

    Hi
    Sorry about the confusing heading above, but its late at night and better words do not occur to me rightaway. Let me explain my situation.
    I have a single instrument (a voltage source) that is being swept from one value to another for an experiment. It has three VI's : 1. enable o/p. 2. Set a voltage output level. 3. diable o/p.
    I am using the error in and error out pins of instrument vis to properly sequence operations. I connect the error out pin of VI 1 to the error in pin of VI 2. Each of these errors is a cluster of three values.
    When I try to wire the error out from VI 2 inside the loop to VI 3 outside the loop, the wiring breaks as I am then trying to connect an array (a 1 dimensional n member array of error outs) to a single error in pin. Trying to connect it to an array outside the loop is obviously the same. (I am making an assumption here - while the loop is running, I do not need to make certain of the sequencing of operations by putting a feedback node on VI 2 - that would mean something quite different in any case.).
    So, how do I pass the last value (in this case, the error out cluster from the last stage) to error in pin of VI 3 ?
    I have read that it might be possible using shift registers. I am quite new to LabVIEW. A somewhat detailed description of what I need to do would be nice.
    Thanks.

    Hello,
    There are basically two options:
    Handle the errors outside the for-loop
    Handle the errors inside the for-loop
    For you solution 1 is the easiest achievable, after the for loop use the 'Merge Errors' VI this will change the 1d-array into a cluster. The downside is that if an error occured later states of the loops don't know this
    Solution 2 uses the shift register you mentioned. To use this you have to right-click on the right hand-side tunnel of the error wire (where it leaves the for-loop) and select shift register, sequentially your mouse pointer changes into an downpointed arrow, click on the entry tunnel on the left of the for-loop. What happens is that an error in the for loop is remembered into the next iteration (use execution highlighting to watch these)
    Here is some code:
    A good start might be:
    The link to the LabVIEW Learning Center is here
    Ton
    Message Edited by TonP on 09-25-2006 08:01 AM
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!
    Attachments:
    Example_BD.png ‏5 KB

  • One of my email accounts appears twice in the Folders pane. No idea why.

    I have several accounts in Thunderbird. One of them appears twice - I know it's an exact copy becasue if I rename one folder, both accounts have the new name. The other accounts show only once. Mystified.

    @christ1 Yes, using the same logic windows limit is something like 16 extbytes. Reality is 4Gb pulls it up.
    There has been recent work on the messageid that will be in the next release, might even have made it into a recent security and stability release. But until that happens Thunderbird has 4Gb limited messageid numbers. I am still not convinced a non IMAP folder can be successful in the 4Gb plus range. Only time will convince me all the ugly realities have been fixed.

  • Calendar new event appear twice in the week view

    Sun Java(tm) System Calendar Server 6.3-20.01 (built Oct 23 2009).
    Sun Java(TM) System Communications Express 6.3 update 1 , with patch
    I create an event within the calendar server week view an the event appear duplicated in this view. The the same event can be viewed within the month, events and day view as one. This is happening within the UWC interface. Is this a bug? does someone has seen this before?
    thanks in advance.

    shjorth wrote:
    bootbk wrote:
    Did you run the patch-config/install-newconfig steps after applying UWC6.3 patch 31?I first installed the patch then configure the UWC.What do you mean by "configure the UWC"? What was the exact command(s) you ran?
    Is this a new installation of UWC?Yes is a new installation. What I means is that I frist installed the UWC then I installed the pacth to last ran the config-uwc command.
    >
    Do you have a front-end / back-end calendar server install?Yes I do.A similar problem was reported some time back but could never be reproduced.
    Are the front-end and back-end calendar servers running an identical release of Calendar Server?Is the same version in both back-end and front-end, identical.
    >
    Have you tried restarting both of the calendar server front-end and back-end servers and logged into UWC/CE and try to reproduce the problem? Yes i did and its happenING
    Regards,
    Shane.

Maybe you are looking for

  • Small business network issues!!!

    I am at my wits end with this problem:  We have a small business network consisting of 6 Mac Pro computers and 2 Windows PCs.  Everything was working fine until we needed to replace one of the WinXP machines with a Windows 7 machine.  None of the Mac

  • WHAT THE HELL IS THE META KEY!?!??!?!

    Hi guys, i am currently adding som Accelerators to my JMenus, can someone tell me what the meta key is? I tryed the windows key, or alt key.. but no luck so far... Appreciate all the help one can get. thx

  • Are 16-bit greyscale images in IMAQ Vision True 16-bit

    Does 16-bit image in Vision control display true 16-bit grayscale (or is it really mapped to 8-bit)? thanks, Don

  • How do I save or set default Tab Groups?

    There are many questions like this already, but non for the actual FF4 release. When I close FF4 I lose all my tab groups. If I tell FF to open previously opened tabs, it saves the tabs & tab groups of the '''most recently closed FF4 window'''. This

  • BAPI for replicate PO in Ext. Classic Scenario

    Hello All, What BAPI may i use to replicate PO in backend system? please give me some hints thanks Paulica