Lose my internet access when I get a phone call

With my Time Capsule base station, every time I get a phone call to my wireless phone I lose my internet connection. Lately the only way to get it back is to unplug my DSL modem and have it restart. It seems that my wireless phone somehow disconnects my signal. The phone base station is closer to me than the time capsule but not sure that's an issue. I have set the robust setting which supposedly helps to address this but it's obviously not working. Anyone that's solved this I would greatly appreciate some advice. Not sure if this is something that AT&T could help me fix.
thanks in advance!
Sean Browne
La Honda, Ca

My phone is a 5.8ghz and I don't see how to change that.
On my timecapsule I can select manual for channel but it appears to give me finer choices for both the 2.4 and 5ghz ranges (other channel numbers) however I can't appear to 'set it' to 2.4ghz. Not sure if I should just try different manual setting for channel... are you able to set it to the 2.4 channel somehow?
thanks

Similar Messages

When i get a phone call i want to activate the led flash - how?

i would like to activate the led flash when i get a phone call without having the normal ringing tone. But how can i do that?

Settings>General>Accessibility?

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps!

When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

When I get a phone call and them want to save the contact, no keyboard comes up to type the name. How do I fix that?

When I get a phone call , then want to save the message, no keyboard comes up to type the name. How do I fix that?

You can open the Phone app then tap Recents then the blue 'i" in a blue circle at the right of the number then "Create New Contact" then tap a field such as "First" name and the keyboard should appear.

My volume buttons won't work. Music plays when I get a phone call. That is the only time my speaker makes noise. My settings are how they should be, the top button is not on silent, I've shut my phone off many times, I've totally restored my phone. Help

My volume buttons won't work. Music plays when I get a phone call. That is the only time my speaker makes noise. My settings are how they should be, the top button is not on silent, I've shut my phone off many times, I've totally restored my phone. Help

Genius reservation http://www.apple.com/retail/geniusbar/

Why do I get a text message when I get a phone call?

When my wife calls and leaves a voice messageI get a text telling me to call her. How do I disable it?

Tell her not to text you when you don't answer her phone calls.

Why isn't my iPhone 5s ringing or beeping when I get a phone call or text?

Whenever someone calls me it goes right to voice mail and doesn't ring. I am missing a lot of phone calls because of it, and it is very annoying. I don't know if there is something wrong in the settings or just in the software. I will appreciate any help!
Thanks a lot,
Zach

Sounds like your phone is on Do Not Disturb.
do you see a cresent moon at the top right of your iphone?
setting - do not disturb - OFF

IOS6 causes Podcast App to Play when I get a phone call!

Try this: play a podcast using the Podcast app with a headset. Unplug the headset - the app pauses automatically. Ok so far. Call your phone. Dismiss the call. The Podcast starts to play!! Or answer the call and talk - Ok. Then hang up the call - the podcast starts to play! Very annoying in meetings.
If you manually click the pause button, the Podcast app doesn't misbehave.
I have a iPhone4 and iOS6. Restarted my phone and it still misbehaves.
Has anyone else seen this?
-Rod

Unplugging the headphones does not quit the app.
Either go to the Podcast app and tell it to stop playing theocrats or quit the app.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

HT4053 I have lost the ring when I get a phone call or a messege. The phone vibrates, but there is no ringtone. I have a ringtone picked and the ringer volume is as high as possible.

That pretty much sez it. No ringtone on a call or messege or text although one has been selected. Vibration but not tone. Ringer volume is all the way and nothing.

Check:

When I receive a phone call it also rings my husbands phone?

When I get a phone call on my IPhone 5c it also rings on my husbands iPhone 4s and vice versa?

That is a new feature of Continuity described in Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
You can stop it by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off on both phones.
You amy also want to consider using separate Apple iDs.

Cascaded routers: no internet access when second router not use NAT

Cascaded routers: no internet access when second router not use NAT
Here is my setup:
[pre]
WAN
|
| 74.96.170.x (WAN IP) |
| Router1(Verizon FiOS Router) |
| Model: MI424WR-GEN2 (Rev F) |
| Firmware: 20.21.0.2 |
| Def router: 74.96.170.1 |
| 192.168.1.1 (Local IP) |
|
| 192.168.1.22 (WAN IP) |
| Router2(Linksys) |
| Model: WRT54GL v1.1 |
| Firmware: v4.30.16 |
| Def Router: 192.168.1.1 |
| 192.168.2.1 (Local IP) |
|
| Computer 192.168.2.160 |
| Def Router: 192.168.2.1 |
"q.route" 120L, 4441C written
[m.wang@m-wang-ltm2:/Users/m.wang/m/Network]
$ more q.route
Cascaded routers: no internet access when second router not use NAT
Here is my setup:
[pre]
WAN
|
| 74.96.170.x (WAN IP) |
| Router1(Verizon FiOS Router) |
| Model: MI424WR-GEN2 (Rev F) |
| Firmware: 20.21.0.2 |
| Def router: 74.96.170.1 |
| 192.168.1.1 (Local IP) |
|
| 192.168.1.22 (WAN IP) |
| Router2(Linksys) |
| Model: WRT54GL v1.1 |
| Firmware: v4.30.16 |
| Def Router: 192.168.1.1 |
| 192.168.2.1 (Local IP) |
|
| Computer 192.168.2.160 |
| Def Router: 192.168.2.1 |
| NO iptables, basic setup |
[/pre]
On computer, I have:
[pre]
# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.2.1 0.0.0.0 UG 2 0 0 enp2s0
loopback localhost 255.0.0.0 UG 0 0 0 lo
192.168.2.0 * 255.255.255.0 U 0 0 0 enp2s0
[/pre]
On Router2, I have:
[pre]
Routing Table Entry List
Destination LAN IP | Subnet Mask | Gateway | Hop Count | Interface
192.168.2.0 255.255.255.0 0.0.0.0 1 LAN & Wireless
192.168.1.0 255.255.255.0 0.0.0.0 1 WAN (Internet)
0.0.0.0 0.0.0.0 192.168.1.1 1 WAN (Internet)
[/pre]
Router2's Operating Mode is Gateway. On Router1, I have:
[pre]
[Router1] Routing Table
Name Destination Gateway Netmask Metric Status
Network (Home/Office) 192.168.2.0 192.168.1.22 255.255.255.0 0 Applied
Network (Home/Office) 192.168.1.0 192.168.1.1 255.255.255.0 0 Applied
Routing Protocol: Internet Group Management Protocol (IGMP)
Default Gateway: 74.96.170.1
[/pre]
On computer, I can run tcptraceroute to yahoo.com OK:
[pre]
# tcptraceroute yahoo.com
Selected device enp2s0, address 192.168.2.160, port 46596 for outgoing packets
Tracing the path to yahoo.com (206.190.36.45) on TCP port 80 (http), 30 hops max
1 192.168.2.1 0.610 ms 0.729 ms 0.735 ms
2 192.168.1.1 1.843 ms 1.378 ms 1.363 ms
3 l100.washdc-vfttp-107.verizon-gni.net (96.241.146.1) 13.620 ms * *
... /* It reached the destination. */
[/pre]
I want to change Router2's Operating Mode from "Gateway" to "Router" because I
want to turn off NAT on Router2 so that I can access all computers attached to
Router2 by their individual IP instead of using port forwarding at Router2.
The problem is after the mode change from "Gateway" to "Router", and regardless
whether I disable RIP or enable RIP, and on what interfaces it is enabled, computer
192.168.2.160 does not have internet connection.
Observations:
[0] INTRAnet works as I can reach computer 192.168.2.160 from computer behind Router1
192.168.1.x and vice versa.
[1] ping and traceroute *work* on Router2 itself using the built-in dianostic tool.
[2] nslookup on computer 192.168.2.160 always works on new lookup. It uses
192.168.2.1 as the resolver.
[3] tcptraceroute stops after step 2:
[pre]
# tcptraceroute yahoo.com
Selected device enp2s0, address 192.168.2.160, port 45999 for outgoing packets
Tracing the path to yahoo.com (98.139.183.24) on TCP port 80 (http), 30 hops max
1 192.168.2.1 2.553 ms 0.534 ms 0.638 ms
2 192.168.1.1 1.342 ms 0.964 ms 0.867 ms
3 * * *
[/pre]
[4] tcpdump shows that computer 192.168.2.160 tries to reach out and nothing is returned:
[pre]
13:34:03.172828 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
13:34:06.175786 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
13:34:09.178804 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
[/pre]
This is not expected because NAT to internet should still be done by Router1, no? Computer
behind Router1 with IP 192.168.1.x has internet connection.
[5] It looks like I cannot change the Routing Table Entry on Router2. I do not think I need to change anything,
just an observation.
[6] If I use LAN to LAN connection, then both intranet and internet works. [The internet IP of Router2 can be
anything not in the same subnet of the Router1, and DHCP on the local side should be disabled to avoid conflict
with the the DHCP on Router1].

I have a question. Unfortunately in order to ask my question, I have to have a lengthy description of my setup. Basically, I have a second Linksys router in "router" operating mode with NAT disabled connected to the Verizon router, and I have a computer which is in a different subnet (192.168.2.x) behind the Linksys router. This computer can communicate with computers behind Verizon router in subnet (192.168.1.x), but cannot reach internet. This is a simplified version of my question, full details are in the original post.
If I setup the Linksys router in "gateway" operating mode, which means with NAT enabled, then both intranet and internet works, but there is no easy way to setup port forwarding for 10 compueters in 192.168.2.x network to communicate with 10 computers in 192.168.1.x network.
If I setup the Linksys router in a LAN to LAN configuration with Verizon routers, but this way all computers are in the same subnet, I want them to be in different subnet for access control and things like that.
I hope this makes things a little clear.
Thanks.

Blackberry Shuts Down when I make a phone call or access to the internet

Please help someone,
I know there are similar question before. I took a look at them. but there was no solution.
just crossing my finger.
my blackberry is...
Curve 9360
3G wifi
7.1 Bundle 2102 ( v 7.1.0.746 Platform 9.6.0.112)
Hope it is enough info on my cellphone.
Everytime I make a phone call or use the internet, it shuts down immediately. when I received the phone call as well.
and I need to charge it first and then I can turn on again.
It is not buttery consumption since the buttery sign shows almost full when I turn on again.
I would like to fix and use this phone at least another year. It has been 2 and half years. should work properly more!
Thank you in advance!

Hi everyone who gave me solutions,
I appreciate all of your help and Im so sorry for late update.
I tried them, but did not work unfortunately. so I bought a new battery for $9 and now it's working very well like a new phone.
I will try to charge battery when it's almost gone.(not all the time) and try not to use phone while it's charging.
I believe that it lengthens cell/battery life.
Thank you again for your help.

I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

Morning Lupoipia,
Thanks for using Apple Support Communities.
If you can't be heard by someone who is calling, take a look at this article:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Best of luck,
Mario

Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue?

Lose my internet access when I get a phone call

Similar Messages

Maybe you are looking for