Loss of support due to addition of views?

I'm working with a contractor who is hosting CM 13 and I need a view created for several reports. Their admin refuses to do anything because he's afraid they will lose support. Does anyone know which database modifications/additions will cause you to lose support? As far as I knew you cannot alter any procedures, functions or views that shipped with Contract Manager, everything else is fair game. Thanks.
Kevin

Here's a thought: Add the view to a copy of your production database. Run your reports, etc. Make sure it works the way you expect. Document the addition and removal of the view, I.E. how it is added and how it is removed. Now add the view to production. If the system experiences any problems, remove the view and see if the problem goes away. Call Oracle if the problem persists (after you clear the transaction log.) Seems to me the burden of proof would be on Oracle to demonstrate you ever had a view in the first place. Since a new view you create is a read-only presentation of select data, I don't see any way possible you could be denied support if it's not present when you ask for help. I do see the possibility, however, that if you have an issue in the future, ask Oracle for help, and they see the view, that they may deny support to you because the view is present.
Data replication may be in order. Replicate the production CM database to a new database and add the view to the new database. Don't know if this is possible. Good luck.

Similar Messages

  • Internet Explorer and FireFox do not support Go To A Page View links

    Internet Explorer and FireFox do not support Go To A Page View links between PDFs created with Acrobat 8 Professional. Safari does support the links. Similar problem on both PC and Mac.
    Two possible errors occur: (1) the error message “page not found”; or (2) nothing at all happens – the reader does not leave the page.
    Do you have any suggestions?

    Check the target field in the Firefox desktop shortcut and make sure that you do not start Firefox with the -no-remote switch or have set the environment variable MOZ_NO_REMOTE=1 (Control Panel > System > Advanced > Environment variables).
    Always make sure to start at least the default profile without the -no-remote command line switch.
    If you need to have more than one profile open at the same time then start subsequent instances with the -no-remote command line switch.
    You can not send links from other programs to a Firefox instance that is started with the -no-remote switch.
    In such a case you need to drag links in a Firefox window or paste the link in the location bar.

  • Is Final Cur Pro 7 support due to be terminated soon?  If so, what has replaced it?  I hear Final Cut Pro X is really awful have replaced it with a new version?

    Is Final Cut Pro 7 support due to be terminated soon?  I know that Final Cut pro X is awful but has it been replaced by something new?  If so will Final Cut Pro 7 be able to interact with any new version?

    When it first appeared in 2011, FCP X attracted a lot of adverse criticism because it appeared that Apple, in their enthusiasm, had rushed it out a bit too quickly whilst there were still some glitches that needed ironing out and a lot of features that had not been incorporated.
    Since then there have been 8 revisions and these later versions have answered pretty well all the criticisms that were levelled against it.
    As with every brilliant new invention there were teething problems coupled with dinosaurs who resented anything different or new ............. when electricity took over from candles there were numerous prophets of doom and history has countless similar examples.

  • I have a iphone 4s that has been repeatedly illegally accessed remotely by someone hacking into my apple id/icloud account.  How do I find this 2nd device?  I have emails being edited/deleted to apple support due to smtp/imap server configurations

    I need help desperately.  i have 8 Icloud email accounts that are being re routed to about 20 additional (yahoo, aol, gmail) accounts I do not own. 
    I have posted the email headers of all icloud accounts on shutterfly.  Repeated attempts to send to apple are either deleted or "edited".
    1) call me and i will tell you the log in info to view.  (just put up today 4/21)  waiting for apple sr. support monday
    <Personal Information Edited By Host>

    If you so readily post private personal information on the internet, like you've just done with your phone number, and are so willing to give login info to complete strangers, I'm not surprised all your iCloud email accounts were so easily hacked.
    But why on earth do you have EIGHT iCloud accounts? You can't personally use them all?
    You need to change the passwords on these accounts to VERY secure passwords and delete the mail settings that are re-directing your emails.

  • Does Visual Studio Online support filtering Product Backlog/Sprint Views and Kanban by Area?

    There seems to be guidance out there now that suggests using one Master Team Project (with Areas and Iterations for partitioning) for everything rather than a Team Project per Application/Solution as the 'out of the box' product sort of steers you towards.
    If this guidance is valid, and I've heard that Microsoft use this approach internal, then is it possible to follow this guidance when using Visual Studio Online?
    I ask because it appears that in order to follow the 'Master Team Project' approach you need to be able to filter various elements of the TFS UI by Area and Iteration in order to allow a discrete view of just the material relating to one 'logical' application,
    team, etc.
    Whilst I see how on-premise TFS can do some of this, I can't see any obvious way to do this with Visual Studio Online - and I'm new to that particular product so accept I may have missed something.
    So my question is, can you follow the 'Master Team Project' approach if using Visual Studio Online and if so could someone steer me in the right direction please?
    Thanks

    Hi  RedDwarf62,
    Visual Studio Online(formerly Team Foundation Service) is a cloud-based service. When work with it, you can take it as TFS but no infrastructure to manage. You can follow the guide to work with Visual Studio Online.
    To have mulpitle Applications/Solutions in one team project or use a team project for each application depends on you and the relationship between solutions/projects. If the solutons/applications has refences each other, it would be better to include
    them in the same team project. 
    Working within a single Team Project also has its benefits. You can check this blog for more informaiton:
    http://nakedalm.com/working-within-a-single-team-project-with-team-foundation-server-2012/
    Best regards,  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Does 10g DW builder support Sybase IQ 12.6 view for source?

    Hi all,
    I have a view in Sybase IQ 12.6.
    Does 10 DW builder support it?
    Thanks

    Hi Ediee,
    Following Sybase versions are supported with BO 6.5.4 according to the supported platform guide.
    Sybase Adaptive Server Enterprise 12.0 Sybase
    Sybase Adaptive Server Enterprise 12.5 Sybase
    Sybase Adaptive Server IQ 12.4.3
    Sybase Adaptive Server IQ 12.5
    Sybase Adaptive Server IQ 12.6
    Sybase Adaptive Server Enterprise 15.0
    Regards,
    Sarbhjeet Kaur

  • "Invalid Binary" error on app. Apple's reason is "Missing 64-bit support" due to changes from Feb 1st 2015

    Hello
    Can anyone help me with an "Invalid Binary" error on my app.
    Apple's response is:
    Dear developer,
    We have discovered one or more issues with your recent submission for "DPS Notes". To process your submission, the following issues must be corrected:
    Missing 64-bit support - Beginning on February 1, 2015 new iOS apps submitted to the App Store must include 64-bit support and be built with the iOS 8 SDK. Beginning June 1, 2015 app updates will also need to follow the same requirements. To enable 64-bit in your project, we recommend using the default Xcode build setting of “Standard architectures” to build a single binary with both 32-bit and 64-bit code.
    Once these issues have been corrected, use Xcode or Application Loader to upload a new binary to iTunes Connect. Choose the new binary on the app’s Details page in My Apps on iTunes Connect, and click Submit for Review.
    Regards,
    The App Store team
    Can someone from the Adobe DPS team let me know how I can recreate the .ipa file so that it will meet Apple's requirements.
    They seem to have moved the goalposts since I created the original .ipa file in December. I thought I'd submitted it, just went back through iTunes Connect to check info as I hadn't heard anything from them, then hit this brick wall. Any help offered would be much appreciated.
    Thanks
    Rebecca

    Hi
    I've Updated App Builder, gone back to the DPS App Builder portal, regenerated new zip and ipa files and downloaded them.
    I clicked the Application Loader 3.0 link, downloaded the latest Appication Version, clicked on the "Deliver your App" button, and submitted the newly built App that was built using 32.4.2 version. (All the app icons were listed as "stored on server" so I presume they are all ok). The .zip file appeared to 'deliver' to Apple successfully. I've tried to resubmit it but get ta "Redundant Binary Upload. There already exists a binary upload with build version..." error message, so presume the orginal binary upload was successful. I have no idea how I can get this app from the "prepare for submission", to "in review". The last time I thought I'd submitted this app I got as far as the "waiting for review" status, and no further.
    At the moment I don't have a"+" button in the Build section - as mentioned on page 66 of Adobe's Step_by_step_guide_to_dps_se.pdf.
    So I can't add the new .zip file to the iTunes Connect > My Apps portal in the Build section of the Versions tab.
    I have put a support email into Apple, but don't expect a reply any day soon.
    The problem with starting all the way back through the App wizard is that I really want to use all the same App Name, Bundle ID, and details etc.
    Do you mean, going back to the Folio Producer Panel, and building a whole new App?
    This process certainly isn't for the faint-hearted!
    HELP!

  • Does my mid 2010 macbook pro's displayport support audio (in addition to the video I know it supports)?

    I have been using my displayport to drive a video only HDMI input by way of a displayport to DVI converter followed by a DVI to HDMI converter. It works great but of course there's no audio at the end of that chain because DVI is a video only connector.
    That made me wonder... is my displayport outputting both audio and video which could be converted directly to HDMI (giving me both audio and video at the HDMI end)? How can I tell if my mid-2010 macbook pro's displayport connector is outputting both audio and video? My internet search is inconclusive about whether both are available on that connector for my mid 2010 model macbook pro.
    Thank you.

    Hi, these MacBooks of 2010 support Audio through display port:
    MacBook Mid 2010 (GeForce 320M)
    MacBook Air 11 inch 2010 or 13 inch 2010 (Core 2 Duo)
    MacBook Pro 13 inch 2010 (GeForce 320M)
    MacBook Pro 15 inch 2010 or 17 inch 2010 (GeForce 330M),
    No 2009 Macs support audio through DisplayPort
    All 2011 and latter Macs support displayPort audio
    so it looks like you can get audio if yo have the Macbook with Geforce 320M

  • Error message: Bind operations are only supported in a single data view.

    I created a new connection handler and data view. When I started ldapsearch I got the above error message. Would like to know how caused that and how to fix it.
    I tried to roll back all my modification and use the default connection handler and it even gave me the above message.
    Thanks!

    Thanks Ludovic!
    It happened when I tried to create two different data views(view1 and view2) and two different connetion handlers (conn1 and conn2).
    view1 will view all data under the root suffix, like dc=example,dc=com
    view2 will view only part of the subordinate, like ou=test,dc=example,dc=com (not sub-suffix)
    I set data-view-atuomatic-routing-mode to limited. So view1 will not have exclude list.
    conn1(priority 33) will use view1. I also set bind-dn to be "uid=testmanager,dc=example,dc=com"
    conn2 (priority 99) will use view2 with no constraint.
    When I started doing ldapsearch using that bind DN of "uid=testmanager,dc=***) and expected to use conn1 (since it fell into the criterial of the bind DN), I encourted this error.
    This error kept on existing even I removed the view1 and conn1. I doubt that I should recover the default setting of routing policy (data-view-automatic-routing-mode), but don't know what the default value for that, maybe "automical" or something else.
    My questions will be:
    1) can i create two different views like one pointing to base and the other one to sub directory?
    2) What is the default value fo data-view-automatic-routing-mode?
    Thanks!

  • DBUA fails due to broken DBA_SEGMENTS view during 10.1.0.4 - 10.2.0.2 upgr

    Hi,
    I'm upgrading 10.1.0.4 to 10.2.0.2 by cloning a 10.2.0.2 ORACLE_HOME
    (runInstaller -clone), running the pre-upgrade info tool (utl102i.sql) and finally
    running the dbua.
    Once I select the database to upgrade and then Next>, the dbua GUI reports
    "ORA-00942: table or view does not exist
    ORA-06512: at line 2509 "
    I tracked this down to the file utl102x.sql, 2509 lines down from DECLARE
    which reads
    " -- Get number of kbytes used
    SELECT SUM(bytes) INTO sum_bytes
    FROM dba_segments seg
    WHERE seg.tablespace_name = ts.tablespace_name;
    Within 10.1.0.4 'select sum(bytes) from dba_segments;' works but within
    10.2.0.2 the same statement returns the ORA-00942 error and a message to
    the effect that there is an error in the recursive SQL. Within the instance
    being upgraded 'select count(1) from dba_segments;' returns the number
    of rows.
    Has anyone seen this or does anyone have any ideas how to resolve this?
    Thanks,
    Darren

    The manual upgrade procedure works and the DBA_SEGMENTS view is fine
    following @catupgd and before SHUTDOWN IMMEDIATE.

  • Dissatisfied with Toshiba support due to dead pixel

    Poetential buyers of Toshiba products beware. Toshiba offers very little support. All they do is try to weasel out of warranty repairs. After owning 14 toshiba laptops, for myself and my business, I will never spend another dollar with Toshiba.
    I have a custom P750. 10 days after receiving it, the motherboard fried. Instead of offering me a replacement unit, I had to wait several days for a box, mail it off, wait for the repairs, and wait for them to mail it back. I couldn't drop it off at the local Toshiba repair facility. Actually, I could, but if I did that, I would be responsible for the cost of repairs. I have no clue what logic there is to that, but there you go. After that 3 week ordeal, I finally got my machine.
    Fast forward to this weekend. A pixel burns out on my screen. My warranty is up in 2 weeks. So begin the repair process. I am astounded when the lady informs me that Toshiba will not fix it. She says "we don't fix screens that only have I dead pixel" and "One pixel does not affect the machine's performance". Well pardon me, but it sure affects me looking at a black dot on my screen 24/7. I ask to speak to a supervisor, she puts me on hold, comes back and tells me she talked with a "level 2 technician" who informed her they wouldn't fix a screen with a dead pixel. Again I ask to speak to a supervisor, so she tells me I'll get a call back.
    So an hour later I get a call back from a "supervisor" who tells me they will not fix a screen with a dead pixel. I try to explain to him, that pixel makes the screen defective, and I want it fixed under warranty. If I'm selling this machine, and somebody asks me "Are there any dead pixels?", I'll have to say yes, and lose money in the process. He tells me again "we don't fix screens for a dead pixel". As I try to explain to him what a warranty is, he cuts me off and tells me he spoke with someone, and they've determined that pixel is the result of physical damage, and therefore not covered at all. ?!?!?

    First of all, how could you possible come to that conclusion without seeing it? Second, how did it go from we don't fix screens with x number or dead pixels, to "you must have damaged it somehow, so we aren't responsible. Third, how it is possible for me to physically damage 1 pixel? Anybody? Cuz I can't think of anything. At this point to guy is rude, and I'm being rude back How dare Toshiba try to worm out their warranty by saying I damaged it. Gutless.
    The "supervisor" then told me he was transferring me to customer relations. I asked to speak to his supervisor, but he said no and put me on hold. There I sat for 20 minutes. Nobody ever came on. Real professional. So, 3 calls later, toshiba agreed to send me a box to send it in, but they couldn't promise me they would fix it. THE WARRANTY IS THE PROMISE! So the Toshiba technician, who I'm sure will be fair and impartial, gets the final say so on my repair. Great. In 2 weeks when my warranty expires I expect my burnt pixel amount to exceed whatever is necessary to send it in. The difference? It'll cost me $400 for Toshiba to fix it.
    Shame on you Toshiba. I've filed a complaint with the BBB, and I will be spending the night on social media expressing this story of how you treat your long time customers. Your "customer service" is a sham. Your business practices are shady and unethical. I will never spend another dollar on anything Toshiba Nor will anybody I know. Did I mention I work in lighting and video production? Now I know you will read this and honestly not care that you aren't getting my money or anybody I know's money. I'm just a little guy. But you keep this up and you will see a difference from the thousands of other people you treat as an ATM. Shame on you.

  • Saddened at the loss of support for 32bit hardware

    My 32bit '07 Mac is crying and I am too,
    As a strong supporter of Apple products early on I've been let down at the resent change to support only 64 bit hardware. As a old geek from the 80's I understand the movement to bigger, stronger, faster. Though as a father of 7 I don't have the luxury to keep up, even at a low end with the Macs. I have an '07 Mac and carried the news of how innovative and user friendly Apple products are to all my windows friends. They now continued to be amazed at the strong leadership into what I agree the future of this technology is. It saddens me that at this point I will not be able to even keep up at a cheap end. I hope in the next months support for 32bit hardware may arise. Though honestly I was hoping that as an early adopter of your hardware you may be able to do something on the low end to assist me. I just would like to continue to be able to support our company as it moves forward into what we both know the future holds. Pickup and play technology, seamless to the user.
    Our Apple

    http://www.apple.com/feedback/macosx.html

  • IO7 LOSS OF FUNCTIONALITY W/ ITUNES VIDEO LANDSCAPE VIEW

    To whom it may concern,
    I have an iphone 5 and since I downloaded IOS7, I lost the ability to view my music viedo playlist in landscape mode.  I have spent hundreds (over $600) of dollars amassing my video play lis and musict.  When I turn the Iphone horizontally my Itunes library album covers appear. My screen is not locked.  I use/purchased my Iphone solely for this feature along side it’s cell phone capabilities.
    This is a very hard pill to swallow.  Is there any pending resolutionin the form of OS update to resolve this MAJOR issue?
    Thanks in advance for your assistance on this matter.
    VR
    Jonathan

    Hi augustchief,
    We are not Apple here. We are just users like you. Send any feedback to Apple:
    http://www.apple.com/feedback/
    Cheers,
    GB

  • Loss of photos due to error message - need to recover

    After downloading some photos on holiday and refining them in iphoto, I received an error message saying it was shutting down. On restarting I noticed a number of events empty based on work I had just completed within them. As I am travelling have had no chance to back up. Any advice on how I can recover the photos. See some software out there but surely this is not needed. Any help will be appreciated

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • On my ipod touch 4g, i have the app of Flashlight Ⓞ. when i try to use it, it says "camera led light is not supported due to your hardware limitation. screen light with maximum brightness will be used instead." I really want to use the app

    please help asap!

    The Flashlight App is for the iPhone (and iPad).  It is not made for the iPod touch.

Maybe you are looking for