Lost my application dvd that came with macbook pro, early 2011. any alternatives to get the applications in that??

lost my application dvd that came with macbook pro, early 2011. any alternatives to get the applications in that??

I'm not sure how this is an iTunes issue, but anyway, other than buying the apps from the Mac App Store (note that iDVD and iWeb are not available via the App Store), the only alternative is to call Apple support and give them the serial number of your Mac. They can usually sell you a new disk set for a reasonable fee.
Regards.

Similar Messages

  • HT1539 I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase.  I push redeem again and it has the same message and I cant download the movie.  What can I do?

    I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase.  I push redeem again and it has the same message and I cant download the movie.  What can I do?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Thunderbolt 2 external hard drive not working with Macbook Pro (early 2011)

    Hi,
    I'm new to this forum and I hope you guys can help me with this:
    I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection.
    I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro: OS X Version 10.6.8 (Snow Leopard).
    Thank you very much for your help!
    Daniel

    Hi danielsh6,
    I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
    Thunderbolt Firmware Update v1.0
    Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
    Hope this helped!
    Forest

  • Fan problems, running asymmetric with macbook pro early 2011

    With Yosemite I have found that the fans are running asymmetric. With a any program running, the control of the fans run without any sense. I´ve tried to reset SMC, reinstall OS X 10.10, use some fan control software, uninstall all fan control software (FanControl 1.2, smcFancontrol, Macs fan control, etc), and nothing is working. When I install a fan control software, I can control left fan but not right one.
    I own a macbook pro early 2011
    Thank you for the help.

    You might consider that it's a hardware problem and not necessarily the OS.
    Perhaps malfunction of the fan with installation of Yosemite is mere coincidence, perhaps it went wrong with the increased speed/runtime one sometimes sees on a laptop during a big install.
    Could be worthwhile to have it looked at by the folks at the Apple store.
    The laptop is 3 years old, after all, and sometimes fans go bad.
    Good Luck!

  • Install Snow Leopard from CD that came with MacBook Pro to different Mac

    I need to re-install Snow Leopard on an older MacBook of mine I want to clean out for my wife.
    The problem is the Snow Leopard CD (family pack) I purchased months ago is scratched, damaged I believe by an iMac at my business. I want to see if it is possible to install 10.6 from the CD's I recently got with my new MacBook pro. I tried to use them in the MacBook (Intel) I'm trying to hand off to my wife but after I selected the language option I got an error message stating I couldn't install that disc on the computer. It already runs 10.6 so I know it's not an OS issue. Is my MacBook detecting that the installation CD is not the same one that came with it?
    Sorry for the wordy post and thanks in advance for any help.

    R C-R wrote:
    Deviros wrote:
    From what i can tell, the media contains only the necessary files to install to that model-specific hardware.
    This is both for licensing & technical reasons. Licensing because that disc is licensed for use only with that specific Mac (not model, literally just that Mac) & technical because pre- & post-install scripts & other installer features on grey system discs are designed just for that model.
    Curious. I know i've used system restore discs from one machine on another due to the fact that we used to - for reasons unknown to me - allow users to keep their restore discs, at which point they subsequently lost them.
    Perhaps it's just older models that allowed it?
    No matter. Thanks for the clarification.

  • How to get Original OS DVD That Came With MacBook Pro

    Hi,
    I bought this MacBook Pro last year - I think I did not get a restore DVD with the OS etc. with it. Is there a way for me to get it from Apple?
    Thanks,
    Apurva

    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those -
    http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
    !http://i50.tinypic.com/izvwo1.gif!

  • Missing games that came with MacBook Pro

    I have somehow managed to lose the backgammon, reversi, chess etc that come preloaded with the MacBook Pro.  I have done a search and I have check applications and can't find them anywhere - any suggestions please?

    I think chess is the only one game app which comes with Mac OSX, though...
    https://itunes.apple.com/jp/app/backgammon-deluxe-free!/id457040445?mt=12
    http://chess-for-mac.en.softonic.com/mac
    http://www.macupdate.com/app/mac/33337/blue-reversi

  • Problem with Macbook Pro early 2011, webcam not working in any apps and windows 7 or 8 on bootcamp, keyboard backlight not working?

    Hi Guys
    I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....

    Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
    For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

  • Blackberry Music Gateway with MacBook Pro early 2011

    Hi,
    I am about to purchase the BB Music gateway to stream all audio from my macbook pro to my strereo hifi. Can somebody please confirm this connects to the mac book pro and will stream all audio output to the hi fi?
    Thanks.

    Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
    For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

  • Issue with Macbook Pro (early 2011) screen going black.

    I installed an SSD with Mt Lion.  Periodically the screen goes black like it's going to sleep.  It hasn't done this in the past just noticed it the last few weeks. 
    The SSD is a Crucial with 8GB of Crucial memory.  I've got all the software fixes up to date.  Has anyone else seen this.  I've read a few postings, one mentioned issues with Mt. Lion and another with a logic board in the laptop. 

    Well, seem like there's already ton of thread related to this issue ...
    https://discussions.apple.com/thread/4766577?tstart=0
    https://discussions.apple.com/message/21110132#21110132
    http://www.mbp2011.com/#

  • Will Windows 7 Pro run with 16GB of Ram in Macbook Pro Early 2011 13-inch?

    Will Windows 7 Pro run with 16GB of Ram in Macbook Pro Early 2011 13-inch?, Does the brand of the Ram matter ?
    I installed Crucial 16 gb and the Mac runs just fine but Windows won't start. It gets to the login screen then it turns white.

    I decided to make another try today after some reading and googling the internet.
    I started windows with my old 4GB memory and changed the bootconfiguration with msconfig. I typed manually in max memory tp 16384 MB and saved the settings. Then I turned it off and inserted the 16GB ram again. Then it started really but when looking at the properties of my computer it says 16 GB installed but I can only use 2,16GB. So I opened msconfig again and changed the settings once more and restarted. Now it says 16GB installed but I can use 14,2GB so I guess it is ok now for some strange reason. I suppose the lost 1,8GB is for the system ?? Do I dare to turn it off again :-) what will it say next time ?
    I am so happy and greatful for all your help, I really really appreciate it and I hope my solution will come to use for someone else with same problem.
    Thank You all :-)

  • TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

    great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

    Here's what I get:
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:11:24:7d:e7:1e
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
    inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:11:24:28:2e:71
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:11:24:ff:fe:7d:e7:1e
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>

  • I have a frisky mouse that came with my iMac. I barely touch it and the screen I'm on is swiped away. What am I doing wrong?

    I have a frisky mouse that came with my iMac. I barely touch it and the screen I'm on is swiped away. What am I doing wrong?

    Hi lindseyclarissa,
    Welcome to the Apple Support Communities!
    Please read over and use the attached article as a reference on how to adjust the mouse tracking and scrolling speeds.
    Apple Wireless Mouse: How to Adjust Tension, Tracking, and Double-Click Speed
    http://support.apple.com/kb/HT3080
    3. Adjust the tracking speed or double-click speed to a level that's comfortable for you.
    Have a great day,
    Joe

  • I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

    I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

    Updated printer drivers.
    http://support.apple.com/kb/DL899

  • My macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

    my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

    Mac OS X: Gray screen appears during startup - Apple Support

Maybe you are looking for