LOST MY DOMAIN FILE AND INDEX DOESNT WORK :(

HI, I got a really big problem here. Recently i got broken imagines on my web which i made it via iweb. Then sudently, my domain file is blank, and my index.html aswell! - i only have my other html files. SO are there anyway that could save me from this?! - I really dont hope that i have to start over. I read that iweb cant read html.file, but does apple have any apps that can read html files and publish it?
HELP ME PLEASE

What version of OS X are you using?

Similar Messages

Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help

Double post…

My ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

It might be time to contact Apple for an out of warranty repair (actually replacement)
See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Replacement for any model iPad 2 is $249

Catalog Index doesnt work on alias columns

We have a table with a text column on which we have created a catalog index. The catalog index doesnt work when I create a view of the table with alias column names. Any ideas suggestions.

Interestingly it looks like it does use the index, at least in 11g, as demonstrated below. Can you post a similar demonstration showing exactly what it is that you are trying that does not use the index, along with your version?
SCOTT@orcl_11g> CREATE TABLE a_table (text_column VARCHAR2 (60))
2 /
Table created.
SCOTT@orcl_11g> INSERT INTO a_table VALUES ('rainbow bridge')
2 /
1 row created.
SCOTT@orcl_11g> CREATE INDEX catalog_index ON a_table (text_column)
2 INDEXTYPE IS CTXSYS.CTXCAT
3 /
Index created.
SCOTT@orcl_11g> CREATE VIEW a_view AS
2 SELECT text_column AS alias_column
3 FROM   a_table
4 /
View created.
SCOTT@orcl_11g> SET AUTOTRACE ON EXPLAIN
SCOTT@orcl_11g> SELECT * FROM a_view WHERE CATSEARCH (alias_column, 'rainbow', '') > 0
2 /
ALIAS_COLUMN
rainbow bridge
Execution Plan
Plan hash value: 2287020511
| Id | Operation                   | Name          | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |               |     1 |    44 |     3   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| A_TABLE       |     1 |    44 |     3   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | CATALOG_INDEX |       |       |            |          |
Predicate Information (identified by operation id):
   2 - access("CTXSYS"."CATSEARCH"("TEXT_COLUMN",'rainbow','')>0)
Note
   - dynamic sampling used for this statement
SCOTT@orcl_11g>

I lost an .msi file and cannot do updates, how do i fix the file?

I lost an .msi file and cannot do updates to my Itunes system, Apple has not been abe to help, where do i find the .msi file or how do i repair the system? All prior updates to the system have worked, but the latest 10.5.2 will not update due to this lost file.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin

Hi ,
We have a catalog that defines 2 types of products (they have too many different properties), so wanted to keep them on two different MDEX engines and serve the applications requests. Here DB catalog and front end ATG application is same for both the MDEX instances.
Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin?
Thanks
Dev

Hi, also have had some problem some monthes ago - I created separete component ProductCatalogSimpleIndexingAdminSecond. After that one of my colleage gave me some advice:
The creating separate component like ProductCatalogSimpleIndexingAdmin for the second IOC is possible way for resolving your situation. But I afraid that this way will be required creating mane duplicates for already existed components.
In my opinion the better way is the following:
starting from AssemblerApplicationConfiguration and ApplicationConfiguration component. It contains details for connecting between ATG and Endeca. Of course you should configure different components for different Endeca Apps.
After that:
Find all components that uses AssemblerApplicationConfiguration and ApplicationConfiguration. Customize these components for using one or another *Configuration component depending on what index works. (many variants released it: the most simple global custom component with flag.)
Then customize the existed ProductCatalogSimpleIndexingAdmin. Using one or another IOC and setting the flag in global custom component when index started. You can add some methods into your custom ProductCatalogSimpleIndexingAdmin like:
Execute baseline index for both IOC (one by one)
Execute baseline for IOC 1
Execute baseline for IOC 2.
Note: you should be afraid about incremental (partial) index in this configuration. But resolving conflicts in incremental index should be done after full implementation these changes.
Regards

I purchased an app namesd FLV Explorer and it doesnt work and it keeps crashing and i sent a report to itunes so they can refunde my money back but they wont answer me back :( please help me :(

and it doesnt work and it keeps crashing and i sent a report to itunes so they can refunde my money back but they wont answer me back please help me

We are all itunes users just like you. We cannot refund anything.
There are no refunds, but you can try contacting itunes support. Click "Support" at the top of this page, then click the link under "Contact Us"

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling

I was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work. help

i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work. help plzzz

Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling

I have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Table files and Index files 2GB on Windows 2003 Server SP2 32-bit

I'm new to Oracle and I've ran into the problem where my Table files and Index files are > 2GB. I have an Oracle instance running version 10.2.0.3.0. I have a number of tables file and index files that have a current files size of 1.99GB. My Oracle crashes about three times a week because of a "Write Fault/Failure. I've detemined that the RDBM is trying to write a index or table files > 2GB. When this occurs it crashes.
I've been reading the Oracle knowledge base that it suggest that there is a fix or release of Oracle 10g to resolve this problem. However, I've been unable to locate any fix or release to address my issue. Does such a fix or release exist? How do I address this issue? I'm from the world of MS SQL and IBM DB2 and we don't have this issue. I am running and NTFS files system. Could this be issue be related to an Windows Fix?
Surely Oracle can handel databases > 2GB.
Thanks in advance for any help.

After reading your response it appears that my real problem has to do with checking pointing. I've included below a copy of the error message:
Oracle process number: 8
Windows thread id: 3768, image: ORACLE.EXE (CKPT)
*** 2008-07-27 16:50:13.569
*** SERVICE NAME:(SYS$BACKGROUND) 2008-07-27 16:50:13.569
*** SESSION ID:(219.1) 2008-07-27 16:50:13.569
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
error 221 detected in background process
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Can you tell me why I'm having issues with checking point and the control file?
Can I rebuild the control file if it s corrupt?
The problem has been going on since April 2008. I'm takening over the system.
Thanks

My phone went blank and now will only show the apple logo I have tried to reset it and that doesnt work HELP!!!!

My iPhone is frozen. It was working find about a hour ago and then for no reason the screen went to the apple logo. I have tried to reset it and that doesnt work. When I press the power/lock button and the center key it turns off but then it comes right back to the apple logo screen and wont go any further. Please help I dont have my stuff saved and would like to keep the stuff i do have on it!!! Every once in awhile the screen will go black for a few seconds then the apple logo pops right back up! I dont know what to do.....

Try to set it up as new device, explained here:
How to back up your data and set up as a new device
First without using the backup, in case it contains corrupt data.
If it works after that, use the backup to restore from.

HT1212 if you cannot remember passcode you selected and get locked out of iphone 4 and it says to connect to itunes and it doesnt work what can you do to have use of your phone again?????

Is there anyway you can enable iphone 4 afer being locked out by entering wrong passcode more than 5 times and it says to connect to itunes and still doesnt work???? so frustrating... apple cannot

iOS: Forgotten passcode or device disabled after entering wrong passcode

HELP! just a b & w screen with "do not disconnect" and restore doesnt work

i dont know whats wrong with my ipod, its just got a b & w version of the normal "do not connect" screen, even when iTunes hasnt recognised it being plugged in, and if i reset it, it just has that folder picture, and the aple.com/support/ipod thing on the screen, before going back to the "do not disconnect" again in black and white. and restore doesnt work, it just says some error, and quits. Does anyone have any idea whats wrong? thanks
(its a 5th gen ipod with video, which should be colour)
Windows XP

Same thing here!!

I bought a brand new charger for my iphone 5 less then two months ago and it doesnt work now

i bought a brand new charger for my iphone 5 less then two months ago and it doesnt work now

You will have a hard time taking it back. Most places will claim you stepped on it accidentally and almost nobody will replace accidental damage for free. 2 months is also a long time. Many places give you 15-30 dys to discover anything wrong and after that it is yours.

LOST MY DOMAIN FILE AND INDEX DOESNT WORK :(

Similar Messages

Maybe you are looking for