Lost RAID function after bios update 870S-G54

WOW, Lucky I backed up original bios before flashing. No RAID during post. Flashed back to original and got my RAID5 array back. Beware of latest version 17.D, 2011-06-29.
What is up with that?

In this case then, stick with the BIOS version that works for you. Just because a new version becomes available, doesn't mean that you MUST upgrade, only if you need to.
And in the meantime, you can report your findings to MSI here:
http://support.msi.com

Similar Messages

  • Array RAID 0 after bios updating

    I'm going to create an RAID 0 array with the Intel ICH5R but one question rises: if I upgrade my bios after creting the RAID 0 array, will I lose all my data?
    Is it sufficient to recreate the array after bios flashing to have back all my data?
    I hope to be clear.
    Thanks

    no, upgrading BIOS won't kill your data. It will only at most, lost the array information. All you need to do is to re-set the array info once more and your data is still "as is".

  • Satellite A50 doesn't function after BIOS update

    Hi All,
    I tried flashing my BIOS through windows as recommended on my Laptop Manufacturer (Toshiba) website. I guess the process went wrong as after 2 hours still the message "Do not interrupt" was getting displayed. I had to force power off my PC. Now it is not booting up.
    The Laptio is Toshiba SA50-114, Satellite series.Model No - PSA50E
    I have tried suggestions in following link
    http://askiris.toshiba.com/ToshibaSu...200%2035586212
    However, this did not work.
    However, I don't have the recovery disk tool and BIOS/ROM file. Have tried searching on internet, but with no results.
    Can someone please help me with
    1. How can I perform the BIOS update to get my PC running back.
    2. Point me to links where I can find the files in the above link.
    Many Thanks in advance.
    Best Regards,
    Parag

    > 1. How can I perform the BIOS update to get my PC running back.
    Not possible if your BIOS ROM module was wrong flashed.
    If you are a lucky man then only the ROM module must be flashed again using an special procedure. But this can be done only by an authorized service provider in your country.
    > 2. Point me to links where I can find the files in the above link.
    There is no link! You will have to ask the ASP for the help.
    Bye

  • Lost ATI CCC after bios update

    I clicked on "system update"(ThinkVantage3) in the start menu. Then "get new updates", It recommended a bios update so I installed it. Now, it replaced the ATI CCC icon in the task bar with a Intel(R) Graphics Media Accelerator Driver for Mobility" icon. I checked and it now says I have a ATI FireGL V5700 graphics card as opposed to the ATI Mobility Radeon HD 3650 before the update. Also, when I click on the ATI Catalyst Control Center program in the start menu, it says, "ATI CCC cannot be started because the currently active GPU is not supported". How do I fix this? Or, how do I uninstall this update? I can't change the screen resolution or any of the other graphics features.

    Hello,
    please try to download newest Ati drivers from Lenovo support pages.
    Regardings bios update:
    Version 1.18-1.01
    [Important] An incorrect display adapter name is displayed on ATI FireGL V5700 model (ThinkPad W500). Note: Make sure that you have updated the display driver with the following version before BIOS update. -ThinkPad Switchable Graphics Driver for Windows Vista Version 8.52.4.4-080919a-069896C-Lenovo (7vd535ww) or later or -ATI Display Driver for Windows XP Version 8.503.2.2-080818a-069536C-Lenovo (7yd119ww) or later Or you will be asked for an appropriate driver for a newly found hardware device and the display may be VGA(640x480) mode. In VGA mode, your icon arragement on the desktop will be messed up.
    (Fix) The external display may have blank screen when the computer is attached to the Docking Station with the LCD closed and then is powered on.
    (Fix) Serial ATA Controller mode option setting is set as wrong value via WMI interface.
    Message Edited by Agotthelf on 12-11-2008 09:54 AM
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • MSI MPOWER MAX Z87 - RAID failure after BIOS update (settings reset)

    I use the integrated intel RAID controller to create a 2 disk RAID-0 6TB (2x3TB), but everytime I update the BIOS, there is a RAID failure.
    It does not matter if I use Live Update or the Update BIOS+ME option of the BIOS menu. All settings are lost, and after the boot the RAID controller is deactivated due to that. I go to BIOS right after the auto-reboot and re-enter my settings (RAID instead of AHCI), but the intel controller only sees 1 disk as a RAID member. Recovery option is not active when I enter the controller options (control+I). I always need to delete and recreate the RAID, which of course loses all data.
    Very frustrating!
    Am I doing the update wrong? I know I did it once and settings were not reset, my RAID was kept intact, but I believe it was only 1 time of 4 or 5 updates I did to my MPOWER MAX.

    Hi, thanks for trying to help!
    - I use Windows 8.1.
    - My vga does not support UEFI so I use... legacy mode? (I'm not that familiar with BIOS->UEFI yet, sorry.)
    - According to Intel RST, the RAID HDDs are on ports 2 and 3.
    - This time the update was from 1.80 to 1.90.
    1.70 to 1.80 also resulted in the same problem, but I used LiveUpdate.
    For previous updates, I don't remember but I sometimes I used LiveUpdate, sometimes the BIOS feature.
    I'm pretty sure that only once the RAID was kept intact, and I don't remember the versions or method I used, but I believe I used the BIOS method (don't know if needed BIOS+ME or not), not LiveUpdate.

  • K7t266 pro2 ru raid problems after bios update

    i updated my bios to most resent ver. as of 12/20/03 and i was going to raid two 120 gig maxter ata 133 hdd.  so i enable onboard raid in bios and save n exit. but it act's like there is no raid the scanning screen is not there nor the screen to access the raid setup. so i go back to the bios to verify the bios settings and raid is still enabled and to find out there is no fastrak 100 boot option there any more just cdrom floppy hdd-0 and disable thats it...any help out there? could use a little. need any more info let me know.  oh! i rolled back my bios to ver. 3.0 to see if it would fix it ....nope :(

    ok got it, flashed bios back to 3.7 and solved my problem woohoo!!

  • H97M-G43 RAID0 Config Lost After Bios Update

    All bios is buged lost RAID0 config after bios update(no know for other RAID modes)
    Firmware Versions with problem:
    2.3
    2.4
    2.5
    2.6
    for 2.0/2.1/2.2 Bios versions no know if have this problem.
    the problem is serious because in each update you lose RAID Config. I hope to fix it quickly

      Of course you lose volumes if you change to AHCI, reboot and back to RAID at least when you have Windows 8/8.1. So now I am slightly confused where the problem is..
    And since we gain experience through time, yes you lose RAID when updating BIOS as it automatically gets back to AHCI (default modes). So if you ever want to update BIOS, best is to disconnect HDDs, update BIOS and reconnect them before entering BIOS.

  • My itunes is asking for a kind of pasword while I am trying to backup my phone as it lost my contacts after an update of the software yesterday?

    My itunes is asking for a kind of pasword while I am trying to backup my phone as it lost my contacts after an update of the software yesterday? As I remember i never set a pasword and even if I have one pas for mos of the things but its not working. Why apple have to set a pasword for me, and why the haven't let the chance to reset the pas if forgoten? If someone have any clue how to fix this please let me know.

    if you cant remember the password of your back-up encryption, you can't back it up
    You will have to restore as a new phone

  • Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with  6.0.1(10A523)version. Please help how to solve this problem.

    Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with  6.0.1(10A523)version. Please help how to solve this problem. Thanks.

    Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
    Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

  • I can't activate windows 8.1 pre-instal​led on my Toshiba E45-B4200 after BIOS Update

    I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
    Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
    I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
    Now I can`t update Windows, Office 2013, and so on. 
    I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
    I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

    It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
    - Peter

  • Problem in booting after bios update

    Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

    see help 8....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • After BIOS update Satellite L350-172 doesn't start anymore

    Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
    I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
    "It was stopped for reason not to damage the Computer" - blue schreen.
    How can I downgrade the bios again? Or - what have I to change in the bios-settings?

    Hi schuwe,
    Im a little bit confused about your posting. How do you tell your BIOS not to restart?
    Anyway, after BIOS update you should load the default settings in BIOS.
    Did you choose the right BIOS especially for your model?

  • HT5278 I lost a screen after this update, does anyone know how to fix this?

    I lost a screen after this update, does anyone know how to fix this?  Update iOS 5.1.1  It used to have three screens with icons on them, now only 1.

    No offence, but as with quite a few others, my Iphone stopped charging on mains after iOS 7.0.4 update too.
    Not sure you can categorically advise that "it simply is not a software issue" when so many different people are having the same symptoms after updating their iOS   Just have a quick Google!
    Luckily my (original Apple) cable will still allow recharging via USB to a laptop. So, process of elimination would point to a bricked charger that was working faultlessly up until the iOS 7.0.4 update was applied. Seems quite a stretch to be a coincidence.
    Look forward to an explanation ..... and an update? ......

  • Hi . plz help me. after bios update. i could work till I shutdown

    After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
    I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

    take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

Maybe you are looking for

  • Old macintosh not working

    I have a Macintosh IIci from 1989 that does not display anything on the monitor. I recently took it out of my attic after abut 10 years of storage. Before I put it in storage, it worked completely fine. Now, if I plug the monitor into the built in vi

  • IPhoto Library Repaired and Corrupted...pse Help..

    Hi and tnxs for reading. Today I had a big issue with iPhoto 9.5.1. I use it daily and the integrity of my photos is paramount. I have multiple Time Machine Backups for this reason on different HDs and TC. Today, while transferring through USB my pho

  • Call crystal report from SDK

    Hi, i need to call a crystal report from SDK. Is there any way to use the B1 internal viewer to show it or do i need to use my own crystal viewer to show the report? Thanks

  • Freely Programmed Search help in Std Comp

    hi, Is it possible to add freely programmed searh help in standard SAP Component. I have dynamically assigned Freely search help to Context attribute using  set_attribute_value_help method. Now new component to be used in seach help is made in differ

  • Internal Order: Change Co Code and Controlling Area

    Hi, We have setup internal order -> <i><b>customised</b></i> order type, to store data regarding our projects. The setup involves choosing a Controlling Area which will inherit the Company Code (1:1 mapping between controlling area & co code) once we